240. Vswitch sample test with vhost async data path test plan¶
240.1. Description¶
Vswitch sample can leverage DMA to accelerate vhost async data-path from dpdk 20.11. This plan test vhost DMA operation callbacks for DSA PMD and vhost async data-path in vhost sample.
–dmas This parameter is used to specify the assigned DMA device of a vhost device. Async vhost-user net driver will be used if –dmas is set. For example –dmas [txd0@wq0.0,txd1@wq0.1,rxd0@wq0.2,rxd1@wq0.3] means use DMA channel wq0.0/wq0.2 for vhost device 0 enqueue/dequeue operation and use DMA channel wq0.1/wq0.3 for vhost device 1 enqueue/dequeue operation. The index of the device corresponds to the socket file in order, that means vhost device 0 is created through the first socket file, vhost device 1 is created through the second socket file, and so on.
For more about vswitch example, please refer to the DPDK docment: http://doc.dpdk.org/guides/sample_app_ug/vhost.html
240.2. Prerequisites¶
240.2.1. Hardware¶
Supportted NICs: NIC that supports VMDQ
240.2.2. Software¶
Trex:http://trex-tgn.cisco.com/trex/release/v2.26.tar.gz
240.2.3. General set up¶
Compile DPDK and vhost example:
# CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static x86_64-native-linuxapp-gcc # meson configure -Dexamples=vhost x86_64-native-linuxapp-gcc # ninja -C x86_64-native-linuxapp-gcc -j 110
Get the PCI device of DUT, for example, 0000:29:00.0 is NIC port, 0000:6a:01.0 - 0000:f6:01.0 are DSA devices:
<dpdk dir># ./usertools/dpdk-devbind.py -s Network devices using kernel driver =================================== 0000:29:00.0 'Ethernet Controller E810-C for QSFP 1592' drv=ice unused=vfio-pci DMA devices using kernel driver =============================== 0000:6a:01.0 'Device 0b25' drv=idxd unused=vfio-pci 0000:6f:01.0 'Device 0b25' drv=idxd unused=vfio-pci 0000:74:01.0 'Device 0b25' drv=idxd unused=vfio-pci 0000:79:01.0 'Device 0b25' drv=idxd unused=vfio-pci 0000:e7:01.0 'Device 0b25' drv=idxd unused=vfio-pci 0000:ec:01.0 'Device 0b25' drv=idxd unused=vfio-pci 0000:f1:01.0 'Device 0b25' drv=idxd unused=vfio-pci 0000:f6:01.0 'Device 0b25' drv=idxd unused=vfio-pci
240.3. Test case¶
240.3.1. Common steps¶
Bind 1 NIC port to vfio-pci:
<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <nic_pci> For example: <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:29:00.0
Bind DSA devices to DPDK vfio-pci driver:
<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <dsa_pci> For example, bind 2 DSA devices to vfio-pci driver: <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:6a:01.0 0000:6f:01.0
Note
One DPDK DSA device can create 8 WQ at most. Below is an example, where DPDK DSA device will create one and eight WQ for DSA deivce 0000:6a:01.0 and 0000:6f:01.0. The value of “max_queues” is 1~8: <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4 -n 4 -a 0000:6a:01.0,max_queues=1 – -i <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4 -n 4 -a 0000:6f:01.0,max_queues=8 – -i
Bind DSA devices to kernel idxd driver, and configure Work Queue (WQ):
<dpdk dir># ./usertools/dpdk-devbind.py -b idxd <dsa_pci> <dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q <wq_num> <dsa_idx>
Note
Better to reset WQ when need operate DSA devices that bound to idxd drvier: <dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py –reset <dsa_idx> You can check it by ‘ls /dev/dsa’ dsa_idx: Index of DSA devices, where 0<=dsa_idx<=7, corresponding to 0000:6a:01.0 - 0000:f6:01.0 wq_num: Number of workqueues per DSA endpoint, where 1<=wq_num<=8
For example, bind 2 DSA devices to idxd driver and configure WQ:
<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 <dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 0 <dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 1 Check WQ by ‘ls /dev/dsa’ and can find “wq0.0 wq1.0 wq1.1 wq1.2 wq1.3”
240.3.2. Test Case 1: VM2VM virtio-user forwarding test when vhost async operation using DSA dpdk driver¶
This case tests that the imix packets can forward normally in VM2VM topology(virtio-user as front-end) when vhost async operation using DSA dpdk drvier, both split ring and packed ring have been covered.
1.Bind 1 NIC port and 1 DSA device to vfio-pci.
On host, launch dpdk-vhost by below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 26-28 -n 4 -a 0000:3a:00.0 -a 0000:6a:01.0,max_queues=4 \ -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@0000:6a:01.0-q0,rxd0@0000:6a:01.0-q1,txd1@0000:6a:01.0-q2,rxd1@0000:6a:01.0-q3] \ --client --total-num-mbufs 600000
Launch virtio-user:
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 29-30 -n 4 --no-pci --file-prefix=testpmd0 \ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/root/dpdk/vhost-net0,queues=1,server=1,mrg_rxbuf=1,in_order=0,packed_vq=1 \ -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1 ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 31-32 -n 4 --no-pci --file-prefix=testpmd1 \ --vdev=net_virtio_user0,mac=00:11:22:33:44:11,path=/root/dpdk/vhost-net1,queues=1,server=1,mrg_rxbuf=1,in_order=1,vectorized=1 \ -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
Loop packets between two virtio-user sides, record performance number with 64b/2000b/8000b/IMIX pkts can get expected:
testpmd0>set fwd mac testpmd0>start tx_first testpmd0>stop testpmd0>set eth-peer 0 00:11:22:33:44:11 testpmd0>start testpmd1>set fwd mac testpmd1>set eth-peer 0 00:11:22:33:44:10 testpmd1>set txpkts 64 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 2000 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 2000,2000,2000,2000 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 64,256,2000,64,256,2000 testpmd1>start tx_first testpmd1>show port stats all
Stop dpdk-vhost side and relaunch it with below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 26-28 -n 4 -a 0000:3a:00.0 -a 0000:6a:01.0,max_queues=4 \ -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@0000:6a:01.0-q0,rxd1@0000:6a:01.0-q1] \ --client --total-num-mbufs 600000
Rerun step 4.
240.3.3. Test Case 2: VM2VM virtio-pmd split ring test with DSA dpdk driver register/unregister stable check¶
This case checks that the split ring with DSA dpdk driver can work stably when the virtio-pmd port is registed and unregisted for many times.
Bind 1 NIC port and 1 DSA device to vfio-pci.
On host, launch dpdk-vhost by below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 26-28 -n 4 -a 0000:3a:00.0 -a 0000:6a:01.0,max_queues=4 \ -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@0000:6a:01.0-q0,rxd0@0000:6a:01.0-q1,txd1@0000:6a:01.0-q2,rxd1@0000:6a:01.0-q3] \ --client --total-num-mbufs 600000
Start VM0 with qemu:
qemu-system-x86_64 -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid \ -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6000-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net0,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=true,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \ -device virtio-serial -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :4 -drive file=/home/image/ubuntu2004.img
Start VM1 with qemu:
qemu-system-x86_64 -name vm1 -enable-kvm -pidfile /tmp/.vm1.pid \ -daemonize -monitor unix:/tmp/vm1_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6001-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net1,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 \ -device virtio-serial -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.0 -vnc :5 -drive file=/home/image/ubuntu2004_2.img
Bind virtio port to vfio-pci in both two VMs:
modprobe vfio enable_unsafe_noiommu_mode=1 modprobe vfio-pci echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode ./usertools/dpdk-devbind.py --bind=vfio-pci 00:05.0
Start testpmd in VMs seperately:
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -- -i --rxq=1 --txq=1 --nb-cores=1 --txd=1024 --rxd=1024
Loop pkts between two virtio-user sides, record performance number with 64b/2000b/8000b/IMIX pkts can get expected:
testpmd0>set fwd mac testpmd0>start tx_first testpmd0>stop testpmd0>set eth-peer 0 52:54:00:00:00:02 testpmd0>start testpmd1>set fwd mac testpmd1>set eth-peer 0 52:54:00:00:00:01 testpmd1>set txpkts 64 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 2000 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 2000,2000,2000,2000 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 64,256,2000,64,256,2000 testpmd1>start tx_first testpmd1>show port stats all
Quit two testpmd in two VMs, bind virtio-pmd port to virtio-pci,then bind port back to vfio-pci, rerun below cmd 50 times:
./usertools/dpdk-devbind.py -u 00:05.0 ./usertools/dpdk-devbind.py --bind=virtio-pci 00:05.0 ./usertools/dpdk-devbind.py --bind=vfio-pci 00:05.0
Rerun step 6-7, check vhost can stable work and get expected throughput.
Quit and relaunch dpdk-vhost with below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 26-28 -n 4 -a 0000:3a:00.0 -a 0000:6a:01.0,max_queues=4 -- -p 0x1 --mergeable 1 --vm2vm 1 \ --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@0000:6a:01.0-q0,rxd1@0000:6a:01.0-q3] \ --client --total-num-mbufs 600000
Rerun step 6-9, check vhost can stable work and get expected throughput.
240.3.4. Test Case 3: VM2VM virtio-pmd packed ring test with DSA dpdk driver register/unregister stable check¶
This case checks that the packed ring with DSA dpdk driver can work stably when the virtio-pmd port is registed and unregisted for many times.
Bind 1 NIC port and 1 DSA devices to vfio-pci.
On host, launch dpdk-vhost by below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 26-28 -n 4 -a 0000:3a:00.0 -a 0000:6a:01.0,max_queues=4 -a 0000:6f:01.0,max_queues=4 \ -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@0000:6a:01.0-q0,rxd0@0000:6a:01.0-q1,txd1@0000:6f:01.0-q2,rxd1@0000:6f:01.0-q3] \ --client --total-num-mbufs 600000
Start VM0 with qemu:
qemu-system-x86_64 -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid \ -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6000-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net0,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \ -device virtio-serial -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :4 -drive file=/home/image/ubuntu2004.img
Start VM1 with qemu:
qemu-system-x86_64 -name vm1 -enable-kvm -pidfile /tmp/.vm1.pid \ -daemonize -monitor unix:/tmp/vm1_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6001-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net1,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 \ -device virtio-serial -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.0 -vnc :5 -drive file=/home/image/ubuntu2004_2.img
Bind virtio port to vfio-pci in both two VMs:
modprobe vfio enable_unsafe_noiommu_mode=1 modprobe vfio-pci echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode ./usertools/dpdk-devbind.py --bind=vfio-pci 00:05.0
Start testpmd in VMs seperately:
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -- -i --rxq=1 --txq=1 --nb-cores=1 --txd=1024 --rxd=1024
Loop packets between two virtio-user sides, record performance number with 64b/2000b/8000b/IMIX pkts can get expected:
testpmd0>set fwd mac testpmd0>start tx_first testpmd0>stop testpmd0>set eth-peer 0 52:54:00:00:00:02 testpmd0>start testpmd1>set fwd mac testpmd1>set eth-peer 0 52:54:00:00:00:01 testpmd1>set txpkts 64 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 2000 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 2000,2000,2000,2000 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 64,256,2000,64,256,2000 testpmd1>start tx_first testpmd1>show port stats all
Quit two testpmd in two VMs, bind virtio-pmd port to virtio-pci,then bind port back to vfio-pci, rerun below cmd 50 times:
./usertools/dpdk-devbind.py -u 00:05.0 ./usertools/dpdk-devbind.py --bind=virtio-pci 00:05.0 ./usertools/dpdk-devbind.py --bind=vfio-pci 00:05.0
Rerun step 6-7，check vhost can stable work and get expected throughput.
Quit VMs and rerun step 3-9.
240.3.5. Test Case 4: VM2VM virtio-net split ring test with DSA dpdk driver and iperf stable check¶
This case tests with split ring with DSA dpdk driver in two VMs, check that iperf/scp and reconnection can work stably between two virito-net.
Bind 1 NIC port and 2 DSA devices to vfio-pci.
On host, launch dpdk-vhost by below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 2-3 -n 4 -a 0000:3a:00.0 -a 0000:6a:01.0,max_queues=2 -a 0000:6f:01.0,max_queues=2 \ -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@0000:6a:01.0-q0,rxd0@0000:6a:01.0-q1,txd1@0000:6f:01.0-q0,rxd1@0000:6f:01.0-q1] \ --client --total-num-mbufs 600000
Start VM0 with qemu:
qemu-system-x86_64 -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid \ -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6000-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net0,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=true,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \ -device virtio-serial -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :4 -drive file=/home/image/ubuntu2004.img
Start VM1 with qemu:
qemu-system-x86_64 -name vm1 -enable-kvm -pidfile /tmp/.vm1.pid \ -daemonize -monitor unix:/tmp/vm1_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6001-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net1,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 \ -device virtio-serial -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.0 -vnc :5 -drive file=/home/image/ubuntu2004_2.img
On VM1, set virtio device IP and run arp protocal:
ifconfig ens5 1.1.1.2 arp -s 1.1.1.8 52:54:00:00:00:02
On VM2, set virtio device IP and run arp protocal:
ifconfig ens5 1.1.1.8 arp -s 1.1.1.2 52:54:00:00:00:01
Check the iperf performance between two VMs by below commands:
Under VM1, run: `iperf -s -i 1` Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
Check iperf throughput can get x Gbits/sec.
Scp 1MB file form VM0 to VM1, check packets can be forwarding success by scp:
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
Relaunch dpdk-vhost, then rerun step 7-9 five times.
Relaunch dpdk-vhost by below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 2-3 -n 4 -a 0000:3a:00.0 -a 0000:6a:01.0,max_queues=2 -- -p 0x1 --mergeable 1 --vm2vm 1 \ --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@0000:6a:01.0-q0,rxd1@0000:6a:01.0-q1] --client
rerun step 7-9.
240.3.6. Test Case 5: VM2VM virtio-net packed ring test with DSA dpdk driver and iperf stable check¶
This case tests with packed ring with DSA dpdk driver in two VMs, check that iperf/scp and reconnection can work stably between two virito-net.
Bind 1 NIC port to vfio-pci and 2 DSA devices to vfio-pci.
On host, launch dpdk-vhost by below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 26-28 -n 4 -a 0000:3a:00.0 -a 0000:6a:01.0,max_queues=2 -a 0000:6f:01.0,max_queues=2 -- -p 0x1 --mergeable 1 --vm2vm 1 \ --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@0000:6a:01.0-q0,rxd0@0000:6a:01.0-q1,txd1@0000:6f:01.0-q0,rxd1@0000:6f:01.0-q1] \ --total-num-mbufs 600000
Start VM0 with qemu:
qemu-system-x86_64 -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid \ -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6000-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net0,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \ -device virtio-serial -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :4 -drive file=/home/image/ubuntu2004.img
Start VM1 with qemu:
qemu-system-x86_64 -name vm1 -enable-kvm -pidfile /tmp/.vm1.pid \ -daemonize -monitor unix:/tmp/vm1_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6001-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net1,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 \ -device virtio-serial -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.0 -vnc :5 -drive file=/home/image/ubuntu2004_2.img
On VM1, set virtio device IP and run arp protocal:
ifconfig ens5 1.1.1.2 arp -s 1.1.1.8 52:54:00:00:00:02
On VM2, set virtio device IP and run arp protocal:
ifconfig ens5 1.1.1.8 arp -s 1.1.1.2 52:54:00:00:00:01
Check the iperf performance between two VMs by below commands:
Under VM1, run: `iperf -s -i 1` Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
Check iperf throughput can get x Gbits/sec.
Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp:
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
Rerun step 7-9 five times.
Relaunch VMs with mrg_rxbuf=on.
Rerun step 5-10.
240.3.7. Test Case 6: VM2VM virtio-net packed ring test with 2 DSA WQ with dpdk driver and iperf stable check¶
This case tests with packed ring with 2 DSA WQ with dpdk driver in two VMs, check that iperf/scp and reconnection can work stably between two virito-net.
Bind 1 NIC port to vfio-pci and 2 DSA devices to vfio-pci.
On host, launch dpdk-vhost by below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 26-28 -n 4 -a 0000:3a:00.0 -a 0000:6a:01.0,max_queues=2 \ -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@0000:6a:01.0-q0,rxd1@0000:6a:01.0-q1] --total-num-mbufs 600000
Start VM0 with qemu:
qemu-system-x86_64 -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid \ -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6000-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net0,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \ -device virtio-serial -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :4 -drive file=/home/image/ubuntu2004.img
Start VM1 with qemu:
qemu-system-x86_64 -name vm1 -enable-kvm -pidfile /tmp/.vm1.pid \ -daemonize -monitor unix:/tmp/vm1_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6001-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net1,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 \ -device virtio-serial -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.0 -vnc :5 -drive file=/home/image/ubuntu2004_2.img
On VM1, set virtio device IP and run arp protocal:
ifconfig ens5 1.1.1.2 arp -s 1.1.1.8 52:54:00:00:00:02
On VM2, set virtio device IP and run arp protocal:
ifconfig ens5 1.1.1.8 arp -s 1.1.1.2 52:54:00:00:00:01
Check the iperf performance between two VMs by below commands:
Under VM1, run: `iperf -s -i 1` Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
Check iperf throughput can get x Gbits/sec.
Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp:
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
Rerun step 7-9 five times.
Relaunch VMs with mrg_rxbuf=on.
Rerun step 5-10.
240.3.8. Test Case 7: VM2VM virtio-user forwarding test when vhost async operation using DSA kernel driver¶
This case tests that the imix packets can forward normally in VM2VM topology(virtio-user as front-end) when vhost async operation using DSA kernel drvier, both split ring and packed ring have been covered.
1.Bind 1 NIC port and 1 DSA device to idxd:
<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:00.0
ls /mnt/dsa #check wq configure, reset if exist
<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
./drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 0
ls /mnt/dsa #check wq configure success
On host, launch dpdk-vhost by below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 26-28 -n 4 -a 0000:6a:01.0 \ -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@wq0.0,rxd0@wq0.1,txd1@wq0.2,rxd1@wq0.3] \ --client --total-num-mbufs 600000
Launch virtio-user:
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 29-30 -n 4 --no-pci --file-prefix=testpmd0 \ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/root/dpdk/vhost-net0,queues=1,server=1,mrg_rxbuf=1,in_order=0,packed_vq=1 \ -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1 ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 31-32 -n 4 --no-pci --file-prefix=testpmd1 \ --vdev=net_virtio_user0,mac=00:11:22:33:44:11,path=/root/dpdk/vhost-net1,queues=1,server=1,mrg_rxbuf=1,in_order=1,vectorized=1 \ -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
Loop packets between two virtio-user sides, record performance number with 64b/2000b/8000b/IMIX pkts can get expected:
testpmd0>set fwd mac testpmd0>start tx_first testpmd0>stop testpmd0>set eth-peer 0 00:11:22:33:44:11 testpmd0>start testpmd1>set fwd mac testpmd1>set eth-peer 0 00:11:22:33:44:10 testpmd1>set txpkts 64 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 2000 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 2000,2000,2000,2000 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 64,256,2000,64,256,2000 testpmd1>start tx_first testpmd1>show port stats all
Stop dpdk-vhost side and relaunch it with below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 26-28 -n 4 -a 0000:6a:01.0 \ -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@wq0.0,rxd1@wq0.1] \ --client --total-num-mbufs 600000
Rerun step 4.
240.3.9. Test Case 8: VM2VM virtio-pmd split ring test with DSA kernel driver register/unregister stable check¶
This case checks that the split ring with DSA kernel driver can work stably when the virtio-pmd port is registed and unregisted for many times.
Bind 1 NIC port and 1 DSA device to idxd:
<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:00.0 ls /mnt/dsa #check wq configure, reset if exist <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 0 ls /mnt/dsa #check wq configure success
On host, launch dpdk-vhost by below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 26-28 -n 4 -a 0000:6a:01.0 \ -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@wq0.0,rxd0@wq0.1,txd1@wq0.2,rxd1@wq0.3] \ --client --total-num-mbufs 600000
Start VM0 with qemu:
qemu-system-x86_64 -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid \ -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6000-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net0,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \ -device virtio-serial -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :4 -drive file=/home/image/ubuntu2004.img
Start VM1 with qemu:
qemu-system-x86_64 -name vm1 -enable-kvm -pidfile /tmp/.vm1.pid \ -daemonize -monitor unix:/tmp/vm1_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6001-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net1,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=true,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 \ -device virtio-serial -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.0 -vnc :5 -drive file=/home/image/ubuntu2004_2.img
Bind virtio port to vfio-pci in both two VMs:
modprobe vfio enable_unsafe_noiommu_mode=1 modprobe vfio-pci echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode ./usertools/dpdk-devbind.py --bind=vfio-pci 00:05.0
Start testpmd in VMs seperately:
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -- -i --rxq=1 --txq=1 --nb-cores=1 --txd=1024 --rxd=1024
Loop pkts between two virtio-user sides, record performance number with 64b/2000b/8000b/IMIX pkts can get expected:
testpmd0>set fwd mac testpmd0>start tx_first testpmd0>stop testpmd0>set eth-peer 0 52:54:00:00:00:02 testpmd0>start testpmd1>set fwd mac testpmd1>set eth-peer 0 52:54:00:00:00:01 testpmd1>set txpkts 64 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 2000 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 2000,2000,2000,2000 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 64,256,2000,64,256,2000 testpmd1>start tx_first testpmd1>show port stats all
Quit two testpmd in two VMs, bind virtio-pmd port to virtio-pci,then bind port back to vfio-pci, rerun below cmd 50 times:
./usertools/dpdk-devbind.py -u 00:05.0 ./usertools/dpdk-devbind.py --bind=virtio-pci 00:05.0 ./usertools/dpdk-devbind.py --bind=vfio-pci 00:05.0
Rerun step 6-7, check vhost can stable work and get expected throughput.
Quit and relaunch dpdk-vhost with below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 26-28 -n 4 -a 0000:6a:01.0 \ -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@wq0.0,rxd1@wq0.3] \ --client --total-num-mbufs 600000
Rerun step 6-9, check vhost can stable work and get expected throughput.
240.3.10. Test Case 9: VM2VM virtio-pmd packed ring test with DSA kernel driver register/unregister stable check¶
This case checks that the packed ring with DSA kernel driver can work stably when the virtio-pmd port is registed and unregisted for many times.
Bind 1 NIC port and 2 DSA devices to idxd:
<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:00.0 ls /mnt/dsa #check wq configure, reset if exist <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 0 ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 1 ls /mnt/dsa #check wq configure success
On host, launch dpdk-vhost by below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 26-28 -n 4 -a 0000:6a:01.0 \ -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@wq0.0,rxd0@wq0.1,txd1@wq1.0,rxd1@wq1.1] \ --client --total-num-mbufs 600000
Start VM0 with qemu:
qemu-system-x86_64 -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid \ -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6000-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net0,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \ -device virtio-serial -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :4 -drive file=/home/image/ubuntu2004.img
Start VM1 with qemu:
qemu-system-x86_64 -name vm1 -enable-kvm -pidfile /tmp/.vm1.pid \ -daemonize -monitor unix:/tmp/vm1_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6001-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net1,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 \ -device virtio-serial -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.0 -vnc :5 -drive file=/home/image/ubuntu2004_2.img
Bind virtio port to vfio-pci in both two VMs:
modprobe vfio enable_unsafe_noiommu_mode=1 modprobe vfio-pci echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode ./usertools/dpdk-devbind.py --bind=vfio-pci 00:05.0
Start testpmd in VMs seperately:
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -- -i --rxq=1 --txq=1 --nb-cores=1 --txd=1024 --rxd=1024
Loop packets between two virtio-user sides, record performance number with 64b/2000b/8000b/IMIX pkts can get expected:
testpmd0>set fwd mac testpmd0>start tx_first testpmd0>stop testpmd0>set eth-peer 0 52:54:00:00:00:02 testpmd0>start testpmd1>set fwd mac testpmd1>set eth-peer 0 52:54:00:00:00:01 testpmd1>set txpkts 64 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 2000 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 2000,2000,2000,2000 testpmd1>start tx_first testpmd1>show port stats all testpmd1>stop testpmd1>set txpkts 64,256,2000,64,256,2000 testpmd1>start tx_first testpmd1>show port stats all
Quit two testpmd in two VMs, bind virtio-pmd port to virtio-pci,then bind port back to vfio-pci, rerun below cmd 50 times:
./usertools/dpdk-devbind.py -u 00:05.0 ./usertools/dpdk-devbind.py --bind=virtio-pci 00:05.0 ./usertools/dpdk-devbind.py --bind=vfio-pci 00:05.0
Rerun step 6-7，check vhost can stable work and get expected throughput.
Quit VMs and rerun step 3-9.
240.3.11. Test Case 10: VM2VM virtio-net split ring test with DSA kernel driver and iperf stable check¶
This case tests with split ring with DSA kenrel driver in two VMs, check that iperf/scp and reconnection can work stably between two virito-net.
Bind 1 NIC port and 2 DSA devices to idxd:
<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:00.0 ls /mnt/dsa #check wq configure, reset if exist <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0 ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 1 ls /mnt/dsa #check wq configure success
On host, launch dpdk-vhost by below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 2-3 -n 4 -a 0000:6a:01.0 \ -- -p 0x1 --tso 1 --vm2vm 1 --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@wq0.0,rxd0@wq0.1,txd1@wq1.0,rxd1@wq1.1] \ --client --total-num-mbufs 600000
Start VM0 with qemu:
qemu-system-x86_64 -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid \ -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6000-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net0,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=true,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \ -device virtio-serial -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :4 -drive file=/home/image/ubuntu2004.img
Start VM1 with qemu:
qemu-system-x86_64 -name vm1 -enable-kvm -pidfile /tmp/.vm1.pid \ -daemonize -monitor unix:/tmp/vm1_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6001-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net1,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 \ -device virtio-serial -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.0 -vnc :5 -drive file=/home/image/ubuntu2004_2.img
On VM1, set virtio device IP and run arp protocal:
ifconfig ens5 1.1.1.2 arp -s 1.1.1.8 52:54:00:00:00:02
On VM2, set virtio device IP and run arp protocal:
ifconfig ens5 1.1.1.8 arp -s 1.1.1.2 52:54:00:00:00:01
Check the iperf performance between two VMs by below commands:
Under VM1, run: `iperf -s -i 1` Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
Check iperf throughput can get x Gbits/sec.
Scp 1MB file form VM0 to VM1, check packets can be forwarding success by scp:
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
Relaunch dpdk-vhost, then rerun step 7-9 five times.
Relaunch dpdk-vhost by below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 2-3 -n 4 -a 0000:6a:01.0 -- -p 0x1 --tso 1 --vm2vm 1 \ --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@wq0.0,rxd1@wq0.1] --client --total-num-mbufs 600000
rerun step 7-9.
240.3.12. Test Case 11: VM2VM virtio-net packed ring test with DSA kenrel driver and iperf stable check¶
This case tests with packed ring with DSA kernel driver in two VMs, check that iperf/scp and reconnection can work stably between two virito-net.
Bind 1 NIC port to vfio-pci and 2 DSA devices to idxd:
<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:00.0 ls /mnt/dsa #check wq configure, reset if exist <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0 ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 1 ls /mnt/dsa #check wq configure success
On host, launch dpdk-vhost by below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 26-28 -n 4 -a 0000:6a:01.0 \ -- -p 0x1 --mergeable 1 --tso 1 --vm2vm 1 --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@wq0.0,rxd0@wq0.1,txd1@wq1.0,rxd1@wq1.1] \ --client --total-num-mbufs 600000
Start VM0 with qemu:
qemu-system-x86_64 -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid \ -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6000-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net0,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \ -device virtio-serial -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :4 -drive file=/home/image/ubuntu2004.img
Start VM1 with qemu:
qemu-system-x86_64 -name vm1 -enable-kvm -pidfile /tmp/.vm1.pid \ -daemonize -monitor unix:/tmp/vm1_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6001-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net1,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 \ -device virtio-serial -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.0 -vnc :5 -drive file=/home/image/ubuntu2004_2.img
On VM1, set virtio device IP and run arp protocal:
ifconfig ens5 1.1.1.2 arp -s 1.1.1.8 52:54:00:00:00:02
On VM2, set virtio device IP and run arp protocal:
ifconfig ens5 1.1.1.8 arp -s 1.1.1.2 52:54:00:00:00:01
Check the iperf performance between two VMs by below commands:
Under VM1, run: `iperf -s -i 1` Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
Check iperf throughput can get x Gbits/sec.
Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp:
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
Rerun step 7-9 five times.
Relaunch VMs with mrg_rxbuf=on.
Rerun step 5-10.
240.3.13. Test Case 12: VM2VM virtio-net packed ring test with 2 DSA WQ with kernel driver and iperf stable check¶
This case tests with packed ring with 2 DSA WQ with dpdk driver in two VMs, check that iperf/scp and reconnection can work stably between two virito-net.
Bind 1 NIC port to vfio-pci and 1 DSA device to idxd:
<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:00.0 ls /mnt/dsa #check wq configure, reset if exist <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0 ls /mnt/dsa #check wq configure success
On host, launch dpdk-vhost by below command:
./x86_64-native-linuxapp-gcc/examples/dpdk-vhost -l 26-28 -n 4 -a 0000:6a:01.0 \ -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /root/dpdk/vhost-net0 --socket-file /root/dpdk/vhost-net1 \ --dmas [txd0@wq0.0,rxd1@wq0.1] \ --client --total-num-mbufs 600000
Start VM0 with qemu:
qemu-system-x86_64 -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid \ -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6000-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net0,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \ -device virtio-serial -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :4 -drive file=/home/image/ubuntu2004.img
Start VM1 with qemu:
qemu-system-x86_64 -name vm1 -enable-kvm -pidfile /tmp/.vm1.pid \ -daemonize -monitor unix:/tmp/vm1_monitor.sock,server,nowait \ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6001-:22 -device e1000,netdev=nttsip1 \ -chardev socket,id=char0,path=./vhost-net1,server -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -cpu host -smp 8 -m 4096 \ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 \ -device virtio-serial -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.0 -vnc :5 -drive file=/home/image/ubuntu2004_2.img
On VM1, set virtio device IP and run arp protocal:
ifconfig ens5 1.1.1.2 arp -s 1.1.1.8 52:54:00:00:00:02
On VM2, set virtio device IP and run arp protocal:
ifconfig ens5 1.1.1.8 arp -s 1.1.1.2 52:54:00:00:00:01
Check the iperf performance between two VMs by below commands:
Under VM1, run: `iperf -s -i 1` Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
Check iperf throughput can get x Gbits/sec.
Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp:
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
Rerun step 7-9 five times.
Relaunch VMs with mrg_rxbuf=on.
Rerun step 5-10.