54. Soft NIC Poll Mode Driver

The Soft NIC allows building custom NIC pipelines in software. The Soft NIC pipeline is DIY and reconfigurable through firmware (DPDK Packet Framework script).

The Soft NIC leverages the DPDK Packet Framework libraries (librte_port, librte_table and librte_pipeline) to make it modular, flexible and extensible with new functionality. Please refer to DPDK Programmer’s Guide, Chapter Packet Framework and DPDK Sample Application User Guide, Chapter IP Pipeline Application for more details.

The Soft NIC is configured through the standard DPDK ethdev API (ethdev, flow, QoS, security). The internal framework is not externally visible.

Key benefits:
  • Can be used to augment missing features to HW NICs.
  • Allows consumption of advanced DPDK features without application redesign.
  • Allows out-of-the-box performance boost of DPDK consumers applications simply by instantiating this type of Ethernet device.

54.1. Flow

  • Device creation: Each Soft NIC instance is a virtual device.
  • Device start: The Soft NIC firmware script is executed every time the device is started. The firmware script typically creates several internal objects, such as: memory pools, SW queues, traffic manager, action profiles, pipelines, etc.
  • Device stop: All the internal objects that were previously created by the firmware script during device start are now destroyed.
  • Device run: Each Soft NIC device needs one or several CPU cores to run. The firmware script maps each internal pipeline to a CPU core. Multiple pipelines can be mapped to the same CPU core. In order for a given pipeline assigned to CPU core X to run, the application needs to periodically call on CPU core X the rte_pmd_softnic_run() function for the current Soft NIC device.
  • Application run: The application reads packets from the Soft NIC device RX queues and writes packets to the Soft NIC device TX queues.

54.2. Supported Operating Systems

Any Linux distribution fulfilling the conditions described in System Requirements section of the DPDK documentation or refer to DPDK Release Notes.

54.3. Soft NIC PMD arguments

The user can specify below arguments in EAL --vdev options to create the Soft NIC device instance:

–vdev “net_softnic0,firmware=firmware.cli,conn_port=8086”
  1. firmware: path to the firmware script used for Soft NIC configuration. The example “firmware” script is provided at drivers/net/softnic/. (Optional: No, Default = NA)
  2. conn_port: tcp connection port (non-zero value) used by remote client (for examples- telnet, netcat, etc.) to connect and configure Soft NIC device in run-time. (Optional: yes, Default value: 0, no connection with external client)
  3. cpu_id: numa node id. (Optional: yes, Default value: 0)
  4. tm_n_queues: number of traffic manager’s scheduler queues. The traffic manager is based on DPDK librte_sched library. (Optional: yes, Default value: 65,536 queues)
  5. tm_qsize0: size of scheduler queue 0 (traffic class 0) of the pipes/subscribers. (Optional: yes, Default: 64)
  6. tm_qsize1: size of scheduler queue 1 (traffic class 1) of the pipes/subscribers. (Optional: yes, Default: 64)
  7. tm_qsize2: size of scheduler queue 2 (traffic class 2) of the pipes/subscribers. (Optional: yes, Default: 64)
  8. tm_qsize3: size of scheduler queue 3 (traffic class 3) of the pipes/subscribers. (Optional: yes, Default: 64)
  9. tm_qsize4: size of scheduler queue 4 (traffic class 4) of the pipes/subscribers. (Optional: yes, Default: 64)
  10. tm_qsize5: size of scheduler queue 5 (traffic class 5) of the pipes/subscribers. (Optional: yes, Default: 64)
  11. tm_qsize6: size of scheduler queue 6 (traffic class 6) of the pipes/subscribers. (Optional: yes, Default: 64)
  12. tm_qsize7: size of scheduler queue 7 (traffic class 7) of the pipes/subscribers. (Optional: yes, Default: 64)
  13. tm_qsize8: size of scheduler queue 8 (traffic class 8) of the pipes/subscribers. (Optional: yes, Default: 64)
  14. tm_qsize9: size of scheduler queue 9 (traffic class 9) of the pipes/subscribers. (Optional: yes, Default: 64)
  15. tm_qsize10: size of scheduler queue 10 (traffic class 10) of the pipes/subscribers. (Optional: yes, Default: 64)
  16. tm_qsize11: size of scheduler queue 11 (traffic class 11) of the pipes/subscribers. (Optional: yes, Default: 64)
  17. tm_qsize12: size of scheduler queue 12 (traffic class 12) of the pipes/subscribers. (Optional: yes, Default: 64)

54.4. Soft NIC testing

  • Run testpmd application with Soft NIC device with loopback feature enabled on Soft NIC port:

    ./dpdk-testpmd -c 0x7 -s 0x4 --vdev 'net_softnic0,firmware=<script path>/firmware.cli,cpu_id=0,conn_port=8086' -- -i
     --portmask=0x2

    ...
Interactive-mode selected
Set softnic packet forwarding mode
...
Configuring Port 0 (socket 0)
Port 0: 90:E2:BA:37:9D:DC
Configuring Port 1 (socket 0)

; SPDX-License-Identifier: BSD-3-Clause
; Copyright(c) 2018 Intel Corporation

link LINK dev 0000:02:00.0

pipeline RX period 10 offset_port_id 0
pipeline RX port in bsz 32 link LINK rxq 0
pipeline RX port out bsz 32 swq RXQ0
pipeline RX table match stub
pipeline RX port in 0 table 0

pipeline TX period 10 offset_port_id 0
pipeline TX port in bsz 32 swq TXQ0
pipeline TX port out bsz 32 link LINK txq 0
pipeline TX table match stub
pipeline TX port in 0 table 0

thread 2 pipeline RX enable
thread 2 pipeline TX enable
Port 1: 00:00:00:00:00:00
Checking link statuses...
Done
testpmd>

  • Start forwarding

    testpmd> start
softnic packet forwarding - ports=1 - cores=1 - streams=1 - NUMA support enabled, MP over anonymous pages disabled
Logical Core 1 (socket 0) forwards packets on 1 streams:
RX P=2/Q=0 (socket 0) -> TX P=2/Q=0 (socket 0) peer=02:00:00:00:00:02

softnic packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=1
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0x1000 Tx offloads=0x0
RX queue: 0
RX desc=512 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8  wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=512 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0  wthresh=0
TX offloads=0x0 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=0 - RX free threshold=0
RX threshold registers: pthresh=0 hthresh=0  wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=0 - TX free threshold=0
TX threshold registers: pthresh=0 hthresh=0  wthresh=0
TX offloads=0x0 - TX RS bit threshold=0

  • Softnic device can be configured using remote client (e.g. telnet). However, testpmd application doesn’t support configuration through telnet :

    $ telnet 127.0.0.1 8086
Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.

Welcome to Soft NIC!

softnic>

  • Add/update Soft NIC pipeline table match-action entries from telnet client:

    softnic> pipeline RX table 0 rule add match default action fwd port 0
softnic> pipeline TX table 0 rule add match default action fwd port 0

54.5. Soft NIC Firmware

The Soft NIC firmware, for example- softnic/firmware.cli, consists of following CLI commands for creating and managing software based NIC pipelines. For more details, please refer to CLI command description provided in softnic/rte_eth_softnic_cli.c.

  • Physical port for packets send/receive:

    link LINK dev 0000:02:00.0

  • Pipeline create:

    pipeline RX period 10 offset_port_id 0           (Soft NIC rx-path pipeline)
pipeline TX period 10 offset_port_id 0           (Soft NIC tx-path pipeline)

  • Pipeline input/output port create

    pipeline RX port in bsz 32 link LINK rxq 0      (Soft NIC rx pipeline input port)
pipeline RX port out bsz 32 swq RXQ0            (Soft NIC rx pipeline output port)
pipeline TX port in bsz 32 swq TXQ0             (Soft NIC tx pipeline input port)
pipeline TX port out bsz 32 link LINK txq 0     (Soft NIC tx pipeline output port)

  • Pipeline table create

    pipeline RX table match stub             (Soft NIC rx pipeline match-action table)
pipeline TX table match stub             (Soft NIC tx pipeline match-action table)

  • Pipeline input port connection with table

    pipeline RX port in 0 table 0          (Soft NIC rx pipeline input port 0 connection with table 0)
pipeline TX port in 0 table 0          (Soft NIC tx pipeline input port 0 connection with table 0)

  • Pipeline table match-action rules add

    pipeline RX table 0 rule add match default action fwd port 0        (Soft NIC rx pipeline table 0 rule)
pipeline TX table 0 rule add match default action fwd port 0        (Soft NIC tx pipeline table 0 rule)

  • Enable pipeline on CPU thread

    thread 2 pipeline RX enable        (Soft NIC rx pipeline enable on cpu thread id 2)
thread 2 pipeline TX enable        (Soft NIC tx pipeline enable on cpu thread id 2)

54.6. QoS API Support:

SoftNIC PMD implements ethdev traffic management APIs rte_tm.h that allow building and committing traffic manager hierarchy, configuring hierarchy nodes of the Quality of Service (QoS) scheduler supported by DPDK librte_sched library. Furthermore, APIs for run-time update to the traffic manager hierarchy are supported by PMD.

SoftNIC PMD also implements ethdev traffic metering and policing APIs rte_mtr.h that enables metering and marking of the packets with the appropriate color (green, yellow or red), according to the traffic metering algorithm. For the meter output color, policer actions like keep the packet color same, change the packet color or drop the packet can be configured.

Note

The SoftNIC does not support the meter object shared by several flows, thus only supports creating meter object private to the flow. Once meter object is successfully created, it can be linked to the specific flow by specifying the meter flow action in the flow rule.

54.7. Flow API support:

The SoftNIC PMD implements ethdev flow APIs rte_flow.h that allow validating flow rules, adding flow rules to the SoftNIC pipeline as table rules, deleting and querying the flow rules. The PMD provides new cli command for creating the flow group and their mapping to the SoftNIC pipeline and table. This cli should be configured as part of firmware file.

flowapi map group <group_id> ingress | egress pipeline <pipeline_name> \
    table <table_id>

From the flow attributes of the flow, PMD uses the group id to get the mapped pipeline and table. PMD supports number of flow actions such as JMP, QUEUE, RSS, DROP, COUNT, METER, VXLAN etc.

Note

The flow must have one terminating actions i.e. JMP or RSS or QUEUE or DROP. For the count and drop actions the underlying PMD doesn’t support the functionality yet. So it is not recommended for use.

The flow API can be tested with the help of testpmd application. The SoftNIC firmware specifies CLI commands for port configuration, pipeline creation, action profile creation and table creation. Once application gets initialized, the flow rules can be added through the testpmd CLI. The PMD will translate the flow rules to the SoftNIC pipeline tables rules.

54.7.1. Example:

Example demonstrates the flow queue action using the SoftNIC firmware and testpmd commands.

  • Prepare SoftNIC firmware

    link LINK0 dev 0000:83:00.0
link LINK1 dev 0000:81:00.0
pipeline RX period 10 offset_port_id 0
pipeline RX port in bsz 32 link LINK0 rxq 0
pipeline RX port in bsz 32 link LINK1 rxq 0
pipeline RX port out bsz 32 swq RXQ0
pipeline RX port out bsz 32 swq RXQ1
table action profile AP0 ipv4 offset 278 fwd
pipeline RX table match hash ext key 16 mask
    00FF0000FFFFFFFFFFFFFFFFFFFFFFFF \
    offset 278 buckets 16K size 65K action AP0
pipeline RX port in 0 table 0
pipeline RX port in 1 table 0
flowapi map group 0 ingress pipeline RX table 0
pipeline TX period 10 offset_port_id 0
pipeline TX port in bsz 32 swq TXQ0
pipeline TX port in bsz 32 swq TXQ1
pipeline TX port out bsz 32 link LINK0 txq 0
pipeline TX port out bsz 32 link LINK1 txq 0
pipeline TX table match hash ext key 16 mask
    00FF0000FFFFFFFFFFFFFFFFFFFFFFFF \
    offset 278 buckets 16K size 65K action AP0
pipeline TX port in 0 table 0
pipeline TX port in 1 table 0
pipeline TX table 0 rule add match hash ipv4_5tuple
    1.10.11.12 2.20.21.22 100 200 6 action fwd port 0
pipeline TX table 0 rule add match hash ipv4_5tuple
    1.10.11.13 2.20.21.23 100 200 6 action fwd port 1
thread 2 pipeline RX enable
thread 2 pipeline TX enable

  • Run testpmd:

    ./<build_dir>/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 \
                            --vdev 'net_softnic0, \
                            firmware=./drivers/net/softnic/ \
                                firmware.cli, \
                            cpu_id=1,conn_port=8086' -- \
                            -i --rxq=2, \
                            --txq=2, --disable-rss --portmask=0x4

  • Configure flow rules on softnic:

    flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src \
    mask 255.255.255.255 dst mask  255.255.255.255 src spec
    1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 \
    dst mask 65535 src spec 100 dst spec 200 / end actions queue \
    index 0 / end
flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src \
    mask 255.255.255.255 dst mask  255.255.255.255 src spec 1.10.11.13 \
    dst spec 2.20.21.23 proto spec 6 / tcp src mask 65535 dst mask \
    65535 src spec 100 dst spec 200 / end actions queue index 1 / end