19. IFCVF vDPA driver
The IFCVF vDPA (vhost data path acceleration) driver provides support for the Intel FPGA 100G VF (IFCVF). IFCVF’s datapath is virtio ring compatible, it works as a HW vhost backend which can send/receive packets to/from virtio directly by DMA. Besides, it supports dirty page logging and device state report/restore, this driver enables its vDPA functionality.
19.1. Pre-Installation Configuration
19.1.1. Config File Options
The following option can be modified in the
Toggle compilation of the
19.2. IFCVF vDPA Implementation
IFCVF’s vendor ID and device ID are same as that of virtio net pci device, with its specific subsystem vendor ID and device ID. To let the device be probed by IFCVF driver, adding “vdpa=1” parameter helps to specify that this device is to be used in vDPA mode, rather than polling mode, virtio pmd will skip when it detects this message.
Different VF devices serve different virtio frontends which are in different VMs, so each VF needs to have its own DMA address translation service. During the driver probe a new container is created for this device, with this container vDPA driver can program DMA remapping table with the VM’s memory region information.
19.2.1. Key IFCVF vDPA driver ops
ifcvf_dev_config: Enable VF data path with virtio information provided by vhost lib, including IOMMU programming to enable VF DMA to VM’s memory, VFIO interrupt setup to route HW interrupt to virtio driver, create notify relay thread to translate virtio driver’s kick to a MMIO write onto HW, HW queues configuration.
This function gets called to set up HW data path backend when virtio driver in VM gets ready.
ifcvf_dev_close: Revoke all the setup in ifcvf_dev_config.
This function gets called when virtio driver stops device in VM.
19.2.2. To create a vhost port with IFC VF
- Create a vhost socket and assign a VF’s device ID to this socket via vhost API. When QEMU vhost connection gets ready, the assigned VF will get configured automatically.
Features of the IFCVF driver are:
- Compatibility with virtio 0.95 and 1.0.
- Platform with IOMMU feature. IFC VF needs address translation service to Rx/Tx directly with virtio driver in VM.
19.5.1. Dependency on vfio-pci
vDPA driver needs to setup VF MSIX interrupts, each queue’s interrupt vector is mapped to a callfd associated with a virtio ring. Currently only vfio-pci allows multiple interrupts, so the IFCVF driver is dependent on vfio-pci.
19.5.2. Live Migration with VIRTIO_NET_F_GUEST_ANNOUNCE
IFC VF doesn’t support RARP packet generation, virtio frontend supporting VIRTIO_NET_F_GUEST_ANNOUNCE feature can help to do that.