#include <stddef.h>
#include <stdint.h>
#include <rte_arp.h>
#include <rte_common.h>
#include <rte_ether.h>
#include <rte_eth_ctrl.h>
#include <rte_icmp.h>
#include <rte_ip.h>
#include <rte_sctp.h>
#include <rte_tcp.h>
#include <rte_udp.h>
#include <rte_byteorder.h>
#include <rte_esp.h>

Data Structures
struct	rte_flow_attr

struct	rte_flow_item_any

struct	rte_flow_item_vf

struct	rte_flow_item_phy_port

struct	rte_flow_item_port_id

struct	rte_flow_item_raw

struct	rte_flow_item_eth

struct	rte_flow_item_vlan

struct	rte_flow_item_ipv4

struct	rte_flow_item_ipv6

struct	rte_flow_item_icmp

struct	rte_flow_item_udp

struct	rte_flow_item_tcp

struct	rte_flow_item_sctp

struct	rte_flow_item_vxlan

struct	rte_flow_item_e_tag

struct	rte_flow_item_nvgre

struct	rte_flow_item_mpls

struct	rte_flow_item_gre

struct	rte_flow_item_fuzzy

struct	rte_flow_item_gtp

struct	rte_flow_item_esp

struct	rte_flow_item_geneve

struct	rte_flow_item_vxlan_gpe

struct	rte_flow_item_arp_eth_ipv4

struct	rte_flow_item_ipv6_ext

struct	rte_flow_item_icmp6

struct	rte_flow_item_icmp6_nd_ns

struct	rte_flow_item_icmp6_nd_na

struct	rte_flow_item_icmp6_nd_opt

struct	rte_flow_item_icmp6_nd_opt_sla_eth

struct	rte_flow_item_icmp6_nd_opt_tla_eth

struct	rte_flow_item_meta

struct	rte_flow_item_mark

struct	rte_flow_item

struct	rte_flow_action_mark

struct	rte_flow_action_jump

struct	rte_flow_action_queue

struct	rte_flow_action_count

struct	rte_flow_query_count

struct	rte_flow_action_rss

struct	rte_flow_action_vf

struct	rte_flow_action_phy_port

struct	rte_flow_action_port_id

struct	rte_flow_action_meter

struct	rte_flow_action_security

struct	rte_flow_action_of_set_mpls_ttl

struct	rte_flow_action_of_set_nw_ttl

struct	rte_flow_action_of_push_vlan

struct	rte_flow_action_of_set_vlan_vid

struct	rte_flow_action_of_set_vlan_pcp

struct	rte_flow_action_of_pop_mpls

struct	rte_flow_action_of_push_mpls

struct	rte_flow_action_vxlan_encap

struct	rte_flow_action_nvgre_encap

struct	rte_flow_action_raw_encap

struct	rte_flow_action_raw_decap

struct	rte_flow_action_set_ipv4

struct	rte_flow_action_set_ipv6

struct	rte_flow_action_set_tp

struct	rte_flow_action_set_ttl

struct	rte_flow_action_set_mac

struct	rte_flow_error

struct	rte_flow_conv_rule

struct	rte_flow_desc

Enumerations
enum	rte_flow_item_type { RTE_FLOW_ITEM_TYPE_END, RTE_FLOW_ITEM_TYPE_VOID, RTE_FLOW_ITEM_TYPE_INVERT, RTE_FLOW_ITEM_TYPE_ANY, RTE_FLOW_ITEM_TYPE_PF, RTE_FLOW_ITEM_TYPE_VF, RTE_FLOW_ITEM_TYPE_PHY_PORT, RTE_FLOW_ITEM_TYPE_PORT_ID, RTE_FLOW_ITEM_TYPE_RAW, RTE_FLOW_ITEM_TYPE_ETH, RTE_FLOW_ITEM_TYPE_VLAN, RTE_FLOW_ITEM_TYPE_IPV4, RTE_FLOW_ITEM_TYPE_IPV6, RTE_FLOW_ITEM_TYPE_ICMP, RTE_FLOW_ITEM_TYPE_UDP, RTE_FLOW_ITEM_TYPE_TCP, RTE_FLOW_ITEM_TYPE_SCTP, RTE_FLOW_ITEM_TYPE_VXLAN, RTE_FLOW_ITEM_TYPE_E_TAG, RTE_FLOW_ITEM_TYPE_NVGRE, RTE_FLOW_ITEM_TYPE_MPLS, RTE_FLOW_ITEM_TYPE_GRE, RTE_FLOW_ITEM_TYPE_FUZZY, RTE_FLOW_ITEM_TYPE_GTP, RTE_FLOW_ITEM_TYPE_GTPC, RTE_FLOW_ITEM_TYPE_GTPU, RTE_FLOW_ITEM_TYPE_ESP, RTE_FLOW_ITEM_TYPE_GENEVE, RTE_FLOW_ITEM_TYPE_VXLAN_GPE, RTE_FLOW_ITEM_TYPE_ARP_ETH_IPV4, RTE_FLOW_ITEM_TYPE_IPV6_EXT, RTE_FLOW_ITEM_TYPE_ICMP6, RTE_FLOW_ITEM_TYPE_ICMP6_ND_NS, RTE_FLOW_ITEM_TYPE_ICMP6_ND_NA, RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT, RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT_SLA_ETH, RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT_TLA_ETH, RTE_FLOW_ITEM_TYPE_MARK, RTE_FLOW_ITEM_TYPE_META }

enum	rte_flow_action_type { RTE_FLOW_ACTION_TYPE_END, RTE_FLOW_ACTION_TYPE_VOID, RTE_FLOW_ACTION_TYPE_PASSTHRU, RTE_FLOW_ACTION_TYPE_JUMP, RTE_FLOW_ACTION_TYPE_MARK, RTE_FLOW_ACTION_TYPE_FLAG, RTE_FLOW_ACTION_TYPE_QUEUE, RTE_FLOW_ACTION_TYPE_DROP, RTE_FLOW_ACTION_TYPE_COUNT, RTE_FLOW_ACTION_TYPE_RSS, RTE_FLOW_ACTION_TYPE_PF, RTE_FLOW_ACTION_TYPE_VF, RTE_FLOW_ACTION_TYPE_PHY_PORT, RTE_FLOW_ACTION_TYPE_PORT_ID, RTE_FLOW_ACTION_TYPE_METER, RTE_FLOW_ACTION_TYPE_SECURITY, RTE_FLOW_ACTION_TYPE_OF_SET_MPLS_TTL, RTE_FLOW_ACTION_TYPE_OF_DEC_MPLS_TTL, RTE_FLOW_ACTION_TYPE_OF_SET_NW_TTL, RTE_FLOW_ACTION_TYPE_OF_DEC_NW_TTL, RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_OUT, RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_IN, RTE_FLOW_ACTION_TYPE_OF_POP_VLAN, RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN, RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID, RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP, RTE_FLOW_ACTION_TYPE_OF_POP_MPLS, RTE_FLOW_ACTION_TYPE_OF_PUSH_MPLS, RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP, RTE_FLOW_ACTION_TYPE_VXLAN_DECAP, RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP, RTE_FLOW_ACTION_TYPE_NVGRE_DECAP, RTE_FLOW_ACTION_TYPE_RAW_ENCAP, RTE_FLOW_ACTION_TYPE_RAW_DECAP, RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC, RTE_FLOW_ACTION_TYPE_SET_IPV4_DST, RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC, RTE_FLOW_ACTION_TYPE_SET_IPV6_DST, RTE_FLOW_ACTION_TYPE_SET_TP_SRC, RTE_FLOW_ACTION_TYPE_SET_TP_DST, RTE_FLOW_ACTION_TYPE_MAC_SWAP, RTE_FLOW_ACTION_TYPE_DEC_TTL, RTE_FLOW_ACTION_TYPE_SET_TTL, RTE_FLOW_ACTION_TYPE_SET_MAC_SRC, RTE_FLOW_ACTION_TYPE_SET_MAC_DST }

enum	rte_flow_error_type { RTE_FLOW_ERROR_TYPE_NONE, RTE_FLOW_ERROR_TYPE_UNSPECIFIED, RTE_FLOW_ERROR_TYPE_HANDLE, RTE_FLOW_ERROR_TYPE_ATTR_GROUP, RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY, RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER, RTE_FLOW_ERROR_TYPE_ATTR, RTE_FLOW_ERROR_TYPE_ITEM_NUM, RTE_FLOW_ERROR_TYPE_ITEM_SPEC, RTE_FLOW_ERROR_TYPE_ITEM_LAST, RTE_FLOW_ERROR_TYPE_ITEM_MASK, RTE_FLOW_ERROR_TYPE_ITEM, RTE_FLOW_ERROR_TYPE_ACTION_NUM, RTE_FLOW_ERROR_TYPE_ACTION_CONF, RTE_FLOW_ERROR_TYPE_ACTION }

enum	rte_flow_conv_op { RTE_FLOW_CONV_OP_NONE, RTE_FLOW_CONV_OP_ATTR, RTE_FLOW_CONV_OP_ITEM, RTE_FLOW_CONV_OP_ACTION, RTE_FLOW_CONV_OP_PATTERN, RTE_FLOW_CONV_OP_ACTIONS, RTE_FLOW_CONV_OP_RULE, RTE_FLOW_CONV_OP_ITEM_NAME, RTE_FLOW_CONV_OP_ACTION_NAME, RTE_FLOW_CONV_OP_ITEM_NAME_PTR, RTE_FLOW_CONV_OP_ACTION_NAME_PTR }

Functions
int	rte_flow_validate (uint16_t port_id, const struct rte_flow_attr attr, const struct rte_flow_item pattern[], const struct rte_flow_action actions[], struct rte_flow_error error)

struct rte_flow *	rte_flow_create (uint16_t port_id, const struct rte_flow_attr attr, const struct rte_flow_item pattern[], const struct rte_flow_action actions[], struct rte_flow_error error)

int	rte_flow_destroy (uint16_t port_id, struct rte_flow flow, struct rte_flow_error error)

int	rte_flow_flush (uint16_t port_id, struct rte_flow_error *error)

int	rte_flow_query (uint16_t port_id, struct rte_flow flow, const struct rte_flow_action action, void data, struct rte_flow_error error)

int	rte_flow_isolate (uint16_t port_id, int set, struct rte_flow_error *error)

int	rte_flow_error_set (struct rte_flow_error error, int code, enum rte_flow_error_type type, const void cause, const char *message)

__rte_deprecated size_t	rte_flow_copy (struct rte_flow_desc fd, size_t len, const struct rte_flow_attr attr, const struct rte_flow_item items, const struct rte_flow_action actions)

__rte_experimental int	rte_flow_conv (enum rte_flow_conv_op op, void dst, size_t size, const void src, struct rte_flow_error *error)

Variables
static const struct rte_flow_item_any	rte_flow_item_any_mask

static const struct rte_flow_item_vf	rte_flow_item_vf_mask

static const struct rte_flow_item_phy_port	rte_flow_item_phy_port_mask

static const struct rte_flow_item_port_id	rte_flow_item_port_id_mask

static const struct rte_flow_item_raw	rte_flow_item_raw_mask

static const struct rte_flow_item_eth	rte_flow_item_eth_mask

static const struct rte_flow_item_vlan	rte_flow_item_vlan_mask

static const struct rte_flow_item_ipv4	rte_flow_item_ipv4_mask

static const struct rte_flow_item_ipv6	rte_flow_item_ipv6_mask

static const struct rte_flow_item_icmp	rte_flow_item_icmp_mask

static const struct rte_flow_item_udp	rte_flow_item_udp_mask

static const struct rte_flow_item_tcp	rte_flow_item_tcp_mask

static const struct rte_flow_item_sctp	rte_flow_item_sctp_mask

static const struct rte_flow_item_vxlan	rte_flow_item_vxlan_mask

static const struct rte_flow_item_e_tag	rte_flow_item_e_tag_mask

static const struct rte_flow_item_nvgre	rte_flow_item_nvgre_mask

static const struct rte_flow_item_mpls	rte_flow_item_mpls_mask

static const struct rte_flow_item_gre	rte_flow_item_gre_mask

static const struct rte_flow_item_fuzzy	rte_flow_item_fuzzy_mask

static const struct rte_flow_item_gtp	rte_flow_item_gtp_mask

static const struct rte_flow_item_esp	rte_flow_item_esp_mask

static const struct rte_flow_item_geneve	rte_flow_item_geneve_mask

static const struct rte_flow_item_vxlan_gpe	rte_flow_item_vxlan_gpe_mask

static const struct rte_flow_item_arp_eth_ipv4	rte_flow_item_arp_eth_ipv4_mask

static const struct rte_flow_item_ipv6_ext	rte_flow_item_ipv6_ext_mask

static const struct rte_flow_item_icmp6	rte_flow_item_icmp6_mask

static const struct rte_flow_item_icmp6_nd_ns	rte_flow_item_icmp6_nd_ns_mask

static const struct rte_flow_item_icmp6_nd_na	rte_flow_item_icmp6_nd_na_mask

static const struct rte_flow_item_icmp6_nd_opt	rte_flow_item_icmp6_nd_opt_mask

static const struct rte_flow_item_icmp6_nd_opt_sla_eth	rte_flow_item_icmp6_nd_opt_sla_eth_mask

static const struct rte_flow_item_icmp6_nd_opt_tla_eth	rte_flow_item_icmp6_nd_opt_tla_eth_mask

static const struct rte_flow_item_meta	rte_flow_item_meta_mask

Detailed Description

RTE generic flow API

This interface provides the ability to program packet matching and associated actions in hardware through flow rules.

Definition in file rte_flow.h.

Enumeration Type Documentation

enum rte_flow_item_type

Matching pattern item types.

Pattern items fall in two categories:

Matching protocol headers and packet data, usually associated with a specification structure. These must be stacked in the same order as the protocol layers to match inside packets, starting from the lowest.
Matching meta-data or affecting pattern processing, often without a specification structure. Since they do not match packet contents, their position in the list is usually not relevant.

See the description of individual types for more information. Those marked with [META] fall into the second category.

Enumerator
RTE_FLOW_ITEM_TYPE_END	[META] End marker for item lists. Prevents further processing of items, thereby ending the pattern. No associated specification structure.
RTE_FLOW_ITEM_TYPE_VOID	[META] Used as a placeholder for convenience. It is ignored and simply discarded by PMDs. No associated specification structure.
RTE_FLOW_ITEM_TYPE_INVERT	[META] Inverted matching, i.e. process packets that do not match the pattern. No associated specification structure.
RTE_FLOW_ITEM_TYPE_ANY	Matches any protocol in place of the current layer, a single ANY may also stand for several protocol layers. See struct rte_flow_item_any.
RTE_FLOW_ITEM_TYPE_PF	[META] Matches traffic originating from (ingress) or going to (egress) the physical function of the current device. No associated specification structure.
RTE_FLOW_ITEM_TYPE_VF	[META] Matches traffic originating from (ingress) or going to (egress) a given virtual function of the current device. See struct rte_flow_item_vf.
RTE_FLOW_ITEM_TYPE_PHY_PORT	[META] Matches traffic originating from (ingress) or going to (egress) a physical port of the underlying device. See struct rte_flow_item_phy_port.
RTE_FLOW_ITEM_TYPE_PORT_ID	[META] Matches traffic originating from (ingress) or going to (egress) a given DPDK port ID. See struct rte_flow_item_port_id.
RTE_FLOW_ITEM_TYPE_RAW	Matches a byte string of a given length at a given offset. See struct rte_flow_item_raw.
RTE_FLOW_ITEM_TYPE_ETH	Matches an Ethernet header. See struct rte_flow_item_eth.
RTE_FLOW_ITEM_TYPE_VLAN	Matches an 802.1Q/ad VLAN tag. See struct rte_flow_item_vlan.
RTE_FLOW_ITEM_TYPE_IPV4	Matches an IPv4 header. See struct rte_flow_item_ipv4.
RTE_FLOW_ITEM_TYPE_IPV6	Matches an IPv6 header. See struct rte_flow_item_ipv6.
RTE_FLOW_ITEM_TYPE_ICMP	Matches an ICMP header. See struct rte_flow_item_icmp.
RTE_FLOW_ITEM_TYPE_UDP	Matches a UDP header. See struct rte_flow_item_udp.
RTE_FLOW_ITEM_TYPE_TCP	Matches a TCP header. See struct rte_flow_item_tcp.
RTE_FLOW_ITEM_TYPE_SCTP	Matches a SCTP header. See struct rte_flow_item_sctp.
RTE_FLOW_ITEM_TYPE_VXLAN	Matches a VXLAN header. See struct rte_flow_item_vxlan.
RTE_FLOW_ITEM_TYPE_E_TAG	Matches a E_TAG header. See struct rte_flow_item_e_tag.
RTE_FLOW_ITEM_TYPE_NVGRE	Matches a NVGRE header. See struct rte_flow_item_nvgre.
RTE_FLOW_ITEM_TYPE_MPLS	Matches a MPLS header. See struct rte_flow_item_mpls.
RTE_FLOW_ITEM_TYPE_GRE	Matches a GRE header. See struct rte_flow_item_gre.
RTE_FLOW_ITEM_TYPE_FUZZY	[META] Fuzzy pattern match, expect faster than default. This is for device that support fuzzy matching option. Usually a fuzzy matching is fast but the cost is accuracy. See struct rte_flow_item_fuzzy.
RTE_FLOW_ITEM_TYPE_GTP	Matches a GTP header. Configure flow for GTP packets. See struct rte_flow_item_gtp.
RTE_FLOW_ITEM_TYPE_GTPC	Matches a GTP header. Configure flow for GTP-C packets. See struct rte_flow_item_gtp.
RTE_FLOW_ITEM_TYPE_GTPU	Matches a GTP header. Configure flow for GTP-U packets. See struct rte_flow_item_gtp.
RTE_FLOW_ITEM_TYPE_ESP	Matches a ESP header. See struct rte_flow_item_esp.
RTE_FLOW_ITEM_TYPE_GENEVE	Matches a GENEVE header. See struct rte_flow_item_geneve.
RTE_FLOW_ITEM_TYPE_VXLAN_GPE	Matches a VXLAN-GPE header. See struct rte_flow_item_vxlan_gpe.
RTE_FLOW_ITEM_TYPE_ARP_ETH_IPV4	Matches an ARP header for Ethernet/IPv4. See struct rte_flow_item_arp_eth_ipv4.
RTE_FLOW_ITEM_TYPE_IPV6_EXT	Matches the presence of any IPv6 extension header. See struct rte_flow_item_ipv6_ext.
RTE_FLOW_ITEM_TYPE_ICMP6	Matches any ICMPv6 header. See struct rte_flow_item_icmp6.
RTE_FLOW_ITEM_TYPE_ICMP6_ND_NS	Matches an ICMPv6 neighbor discovery solicitation. See struct rte_flow_item_icmp6_nd_ns.
RTE_FLOW_ITEM_TYPE_ICMP6_ND_NA	Matches an ICMPv6 neighbor discovery advertisement. See struct rte_flow_item_icmp6_nd_na.
RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT	Matches the presence of any ICMPv6 neighbor discovery option. See struct rte_flow_item_icmp6_nd_opt.
RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT_SLA_ETH	Matches an ICMPv6 neighbor discovery source Ethernet link-layer address option. See struct rte_flow_item_icmp6_nd_opt_sla_eth.
RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT_TLA_ETH	Matches an ICMPv6 neighbor discovery target Ethernet link-layer address option. See struct rte_flow_item_icmp6_nd_opt_tla_eth.
RTE_FLOW_ITEM_TYPE_MARK	Matches specified mark field. See struct rte_flow_item_mark.
RTE_FLOW_ITEM_TYPE_META	[META] Matches a metadata value specified in mbuf metadata field. See struct rte_flow_item_meta.

Definition at line 116 of file rte_flow.h.

enum rte_flow_action_type

Action types.

Each possible action is represented by a type. Some have associated configuration structures. Several actions combined in a list can be assigned to a flow rule and are performed in order.

They fall in three categories:

Actions that modify the fate of matching traffic, for instance by dropping or assigning it a specific destination.
Actions that modify matching traffic contents or its properties. This includes adding/removing encapsulation, encryption, compression and marks.
Actions related to the flow rule itself, such as updating counters or making it non-terminating.

Flow rules being terminating by default, not specifying any action of the fate kind results in undefined behavior. This applies to both ingress and egress.

PASSTHRU, when supported, makes a flow rule non-terminating.

Enumerator
RTE_FLOW_ACTION_TYPE_END	End marker for action lists. Prevents further processing of actions, thereby ending the list. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_VOID	Used as a placeholder for convenience. It is ignored and simply discarded by PMDs. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_PASSTHRU	Leaves traffic up for additional processing by subsequent flow rules; makes a flow rule non-terminating. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_JUMP	RTE_FLOW_ACTION_TYPE_JUMP Redirects packets to a group on the current device. See struct rte_flow_action_jump.
RTE_FLOW_ACTION_TYPE_MARK	Attaches an integer value to packets and sets PKT_RX_FDIR and PKT_RX_FDIR_ID mbuf flags. See struct rte_flow_action_mark.
RTE_FLOW_ACTION_TYPE_FLAG	Flags packets. Similar to MARK without a specific value; only sets the PKT_RX_FDIR mbuf flag. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_QUEUE	Assigns packets to a given queue index. See struct rte_flow_action_queue.
RTE_FLOW_ACTION_TYPE_DROP	Drops packets. PASSTHRU overrides this action if both are specified. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_COUNT	Enables counters for this flow rule. These counters can be retrieved and reset through rte_flow_query(), see struct rte_flow_query_count. See struct rte_flow_action_count.
RTE_FLOW_ACTION_TYPE_RSS	Similar to QUEUE, except RSS is additionally performed on packets to spread them among several queues according to the provided parameters. See struct rte_flow_action_rss.
RTE_FLOW_ACTION_TYPE_PF	Directs matching traffic to the physical function (PF) of the current device. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_VF	Directs matching traffic to a given virtual function of the current device. See struct rte_flow_action_vf.
RTE_FLOW_ACTION_TYPE_PHY_PORT	Directs packets to a given physical port index of the underlying device. See struct rte_flow_action_phy_port.
RTE_FLOW_ACTION_TYPE_PORT_ID	Directs matching traffic to a given DPDK port ID. See struct rte_flow_action_port_id.
RTE_FLOW_ACTION_TYPE_METER	Traffic metering and policing (MTR). See struct rte_flow_action_meter. See file rte_mtr.h for MTR object configuration.
RTE_FLOW_ACTION_TYPE_SECURITY	Redirects packets to security engine of current device for security processing as specified by security session. See struct rte_flow_action_security.
RTE_FLOW_ACTION_TYPE_OF_SET_MPLS_TTL	Implements OFPAT_SET_MPLS_TTL ("MPLS TTL") as defined by the OpenFlow Switch Specification. See struct rte_flow_action_of_set_mpls_ttl.
RTE_FLOW_ACTION_TYPE_OF_DEC_MPLS_TTL	Implements OFPAT_DEC_MPLS_TTL ("decrement MPLS TTL") as defined by the OpenFlow Switch Specification. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_OF_SET_NW_TTL	Implements OFPAT_SET_NW_TTL ("IP TTL") as defined by the OpenFlow Switch Specification. See struct rte_flow_action_of_set_nw_ttl.
RTE_FLOW_ACTION_TYPE_OF_DEC_NW_TTL	Implements OFPAT_DEC_NW_TTL ("decrement IP TTL") as defined by the OpenFlow Switch Specification. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_OUT	Implements OFPAT_COPY_TTL_OUT ("copy TTL "outwards" -- from next-to-outermost to outermost") as defined by the OpenFlow Switch Specification. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_IN	Implements OFPAT_COPY_TTL_IN ("copy TTL "inwards" -- from outermost to next-to-outermost") as defined by the OpenFlow Switch Specification. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_OF_POP_VLAN	Implements OFPAT_POP_VLAN ("pop the outer VLAN tag") as defined by the OpenFlow Switch Specification. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN	Implements OFPAT_PUSH_VLAN ("push a new VLAN tag") as defined by the OpenFlow Switch Specification. See struct rte_flow_action_of_push_vlan.
RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID	Implements OFPAT_SET_VLAN_VID ("set the 802.1q VLAN id") as defined by the OpenFlow Switch Specification. See struct rte_flow_action_of_set_vlan_vid.
RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP	Implements OFPAT_SET_LAN_PCP ("set the 802.1q priority") as defined by the OpenFlow Switch Specification. See struct rte_flow_action_of_set_vlan_pcp.
RTE_FLOW_ACTION_TYPE_OF_POP_MPLS	Implements OFPAT_POP_MPLS ("pop the outer MPLS tag") as defined by the OpenFlow Switch Specification. See struct rte_flow_action_of_pop_mpls.
RTE_FLOW_ACTION_TYPE_OF_PUSH_MPLS	Implements OFPAT_PUSH_MPLS ("push a new MPLS tag") as defined by the OpenFlow Switch Specification. See struct rte_flow_action_of_push_mpls.
RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP	Encapsulate flow in VXLAN tunnel as defined in rte_flow_action_vxlan_encap action structure. See struct rte_flow_action_vxlan_encap.
RTE_FLOW_ACTION_TYPE_VXLAN_DECAP	Decapsulate outer most VXLAN tunnel from matched flow. If flow pattern does not define a valid VXLAN tunnel (as specified by RFC7348) then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error.
RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP	Encapsulate flow in NVGRE tunnel defined in the rte_flow_action_nvgre_encap action structure. See struct rte_flow_action_nvgre_encap.
RTE_FLOW_ACTION_TYPE_NVGRE_DECAP	Decapsulate outer most NVGRE tunnel from matched flow. If flow pattern does not define a valid NVGRE tunnel (as specified by RFC7637) then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error.
RTE_FLOW_ACTION_TYPE_RAW_ENCAP	Add outer header whose template is provided in its data buffer See struct rte_flow_action_raw_encap.
RTE_FLOW_ACTION_TYPE_RAW_DECAP	Remove outer header whose template is provided in its data buffer. See struct rte_flow_action_raw_decap
RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC	Modify IPv4 source address in the outermost IPv4 header. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV4, then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_ipv4.
RTE_FLOW_ACTION_TYPE_SET_IPV4_DST	Modify IPv4 destination address in the outermost IPv4 header. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV4, then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_ipv4.
RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC	Modify IPv6 source address in the outermost IPv6 header. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV6, then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_ipv6.
RTE_FLOW_ACTION_TYPE_SET_IPV6_DST	Modify IPv6 destination address in the outermost IPv6 header. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV6, then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_ipv6.
RTE_FLOW_ACTION_TYPE_SET_TP_SRC	Modify source port number in the outermost TCP/UDP header. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_TCP or RTE_FLOW_ITEM_TYPE_UDP, then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_tp.
RTE_FLOW_ACTION_TYPE_SET_TP_DST	Modify destination port number in the outermost TCP/UDP header. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_TCP or RTE_FLOW_ITEM_TYPE_UDP, then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_tp.
RTE_FLOW_ACTION_TYPE_MAC_SWAP	Swap the source and destination MAC addresses in the outermost Ethernet header. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_ETH, then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_DEC_TTL	Decrease TTL value directly No associated configuration structure.
RTE_FLOW_ACTION_TYPE_SET_TTL	Set TTL value See struct rte_flow_action_set_ttl
RTE_FLOW_ACTION_TYPE_SET_MAC_SRC	Set source MAC address from matched flow. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_ETH, the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_mac.
RTE_FLOW_ACTION_TYPE_SET_MAC_DST	Set destination MAC address from matched flow. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_ETH, the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_mac.

Definition at line 1270 of file rte_flow.h.

enum rte_flow_error_type

Verbose error types.

Most of them provide the type of the object referenced by struct rte_flow_error.cause.

Enumerator
RTE_FLOW_ERROR_TYPE_NONE	No error.
RTE_FLOW_ERROR_TYPE_UNSPECIFIED	Cause unspecified.
RTE_FLOW_ERROR_TYPE_HANDLE	Flow rule (handle).
RTE_FLOW_ERROR_TYPE_ATTR_GROUP	Group field.
RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY	Priority field.
RTE_FLOW_ERROR_TYPE_ATTR_INGRESS	Ingress field.
RTE_FLOW_ERROR_TYPE_ATTR_EGRESS	Egress field.
RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER	Transfer field.
RTE_FLOW_ERROR_TYPE_ATTR	Attributes structure.
RTE_FLOW_ERROR_TYPE_ITEM_NUM	Pattern length.
RTE_FLOW_ERROR_TYPE_ITEM_SPEC	Item specification.
RTE_FLOW_ERROR_TYPE_ITEM_LAST	Item specification range.
RTE_FLOW_ERROR_TYPE_ITEM_MASK	Item specification mask.
RTE_FLOW_ERROR_TYPE_ITEM	Specific pattern item.
RTE_FLOW_ERROR_TYPE_ACTION_NUM	Number of actions.
RTE_FLOW_ERROR_TYPE_ACTION_CONF	Action configuration.
RTE_FLOW_ERROR_TYPE_ACTION	Specific action.

Definition at line 2151 of file rte_flow.h.

enum rte_flow_conv_op

Conversion operations for flow API objects.

See also: rte_flow_conv()

Enumerator
RTE_FLOW_CONV_OP_NONE	No operation to perform. rte_flow_conv() simply returns 0.
RTE_FLOW_CONV_OP_ATTR	Convert attributes structure. This is a basic copy of an attributes structure. `src` type: 1 const struct rte_flow_attr * `dst` type: 1 struct rte_flow_attr *
RTE_FLOW_CONV_OP_ITEM	Convert a single item. Duplicates `spec`, `last` and `mask` but not outside objects. `src` type: 1 const struct rte_flow_item * `dst` type: 1 struct rte_flow_item *
RTE_FLOW_CONV_OP_ACTION	Convert a single action. Duplicates `conf` but not outside objects. `src` type: 1 const struct rte_flow_action * `dst` type: 1 struct rte_flow_action *
RTE_FLOW_CONV_OP_PATTERN	Convert an entire pattern. Duplicates all pattern items at once with the same constraints as RTE_FLOW_CONV_OP_ITEM. `src` type: 1 const struct rte_flow_item * `dst` type: 1 struct rte_flow_item *
RTE_FLOW_CONV_OP_ACTIONS	Convert a list of actions. Duplicates the entire list of actions at once with the same constraints as RTE_FLOW_CONV_OP_ACTION. `src` type: 1 const struct rte_flow_action * `dst` type: 1 struct rte_flow_action *
RTE_FLOW_CONV_OP_RULE	Convert a complete flow rule description. Comprises attributes, pattern and actions together at once with the usual constraints. `src` type: 1 const struct rte_flow_conv_rule * `dst` type: 1 struct rte_flow_conv_rule *
RTE_FLOW_CONV_OP_ITEM_NAME	Convert item type to its name string. Writes a NUL-terminated string to `dst`. Like snprintf(), the returned value excludes the terminator which is always written nonetheless. `src` type: 1 (const void )enum rte_flow_item_type `dst` type: 1 char
RTE_FLOW_CONV_OP_ACTION_NAME	Convert action type to its name string. Writes a NUL-terminated string to `dst`. Like snprintf(), the returned value excludes the terminator which is always written nonetheless. `src` type: 1 (const void )enum rte_flow_action_type `dst` type: 1 char
RTE_FLOW_CONV_OP_ITEM_NAME_PTR	Convert item type to pointer to item name. Retrieves item name pointer from its type. The string itself is not copied; instead, a unique pointer to an internal static constant storage is written to `dst`. `src` type: 1 (const void )enum rte_flow_item_type `dst` type: 1 const char *
RTE_FLOW_CONV_OP_ACTION_NAME_PTR	Convert action type to pointer to action name. Retrieves action name pointer from its type. The string itself is not copied; instead, a unique pointer to an internal static constant storage is written to `dst`. `src` type: 1 (const void )enum rte_flow_action_type `dst` type: 1 const char *

Definition at line 2217 of file rte_flow.h.

Function Documentation

int rte_flow_validate	(	uint16_t	port_id,
		const struct rte_flow_attr *	attr,
		const struct rte_flow_item	pattern[],
		const struct rte_flow_action	actions[],
		struct rte_flow_error *	error
	)

Check whether a flow rule can be created on a given port.

The flow rule is validated for correctness and whether it could be accepted by the device given sufficient resources. The rule is checked against the current device mode and queue configuration. The flow rule may also optionally be validated against existing flow rules and device resources. This function has no effect on the target device.

The returned value is guaranteed to remain valid only as long as no successful calls to rte_flow_create() or rte_flow_destroy() are made in the meantime and no device parameter affecting flow rules in any way are modified, due to possible collisions or resource limitations (although in such cases EINVAL should not be returned).

Parameters

	port_id	Port identifier of Ethernet device.
[in]	attr	Flow rule attributes.
[in]	pattern	Pattern specification (list terminated by the END pattern item).
[in]	actions	Associated actions (list terminated by the END action).
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns: 0 if flow rule is valid and can be created. A negative errno value otherwise (rte_errno is also set), the following errors are defined:

-ENOSYS: underlying device does not support this functionality.

-EIO: underlying device is removed.

-EINVAL: unknown or invalid rule specification.

-ENOTSUP: valid but unsupported rule specification (e.g. partial bit-masks are unsupported).

-EEXIST: collision with an existing rule. Only returned if device supports flow rule collision checking and there was a flow rule collision. Not receiving this return code is no guarantee that creating the rule will not fail due to a collision.

-ENOMEM: not enough memory to execute the function, or if the device supports resource validation, resource limitation on the device.

-EBUSY: action cannot be performed due to busy device resources, may succeed if the affected queues or even the entire port are in a stopped state (see rte_eth_dev_rx_queue_stop() and rte_eth_dev_stop()).

Examples:: examples/flow_filtering/flow_blocks.c, and examples/ipsec-secgw/ipsec.c.

struct rte_flow* rte_flow_create	(	uint16_t	port_id,
		const struct rte_flow_attr *	attr,
		const struct rte_flow_item	pattern[],
		const struct rte_flow_action	actions[],
		struct rte_flow_error *	error
	)

Create a flow rule on a given port.

Parameters

	port_id	Port identifier of Ethernet device.
[in]	attr	Flow rule attributes.
[in]	pattern	Pattern specification (list terminated by the END pattern item).
[in]	actions	Associated actions (list terminated by the END action).
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns: A valid handle in case of success, NULL otherwise and rte_errno is set to the positive version of one of the error codes defined for rte_flow_validate().

Examples:: examples/flow_filtering/flow_blocks.c, and examples/ipsec-secgw/ipsec.c.

int rte_flow_destroy	(	uint16_t	port_id,
		struct rte_flow *	flow,
		struct rte_flow_error *	error
	)

Destroy a flow rule on a given port.

Failure to destroy a flow rule handle may occur when other flow rules depend on it, and destroying it would result in an inconsistent state.

This function is only guaranteed to succeed if handles are destroyed in reverse order of their creation.

Parameters

	port_id	Port identifier of Ethernet device.
	flow	Flow rule handle to destroy.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns: 0 on success, a negative errno value otherwise and rte_errno is set.

int rte_flow_flush	(	uint16_t	port_id,
		struct rte_flow_error *	error
	)

Destroy all flow rules associated with a port.

In the unlikely event of failure, handles are still considered destroyed and no longer valid but the port must be assumed to be in an inconsistent state.

Parameters

	port_id	Port identifier of Ethernet device.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns: 0 on success, a negative errno value otherwise and rte_errno is set.

Examples:: examples/flow_filtering/main.c.

int rte_flow_query	(	uint16_t	port_id,
		struct rte_flow *	flow,
		const struct rte_flow_action *	action,
		void *	data,
		struct rte_flow_error *	error
	)

Query an existing flow rule.

This function allows retrieving flow-specific data such as counters. Data is gathered by special actions which must be present in the flow rule definition.

See also: RTE_FLOW_ACTION_TYPE_COUNT

Parameters

	port_id	Port identifier of Ethernet device.
	flow	Flow rule handle to query.
	action	Action definition as defined in original flow rule.
[in,out]	data	Pointer to storage for the associated query data type.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns: 0 on success, a negative errno value otherwise and rte_errno is set.

int rte_flow_isolate	(	uint16_t	port_id,
		int	set,
		struct rte_flow_error *	error
	)

Restrict ingress traffic to the defined flow rules.

Isolated mode guarantees that all ingress traffic comes from defined flow rules only (current and future).

Besides making ingress more deterministic, it allows PMDs to safely reuse resources otherwise assigned to handle the remaining traffic, such as global RSS configuration settings, VLAN filters, MAC address entries, legacy filter API rules and so on in order to expand the set of possible flow rule types.

Calling this function as soon as possible after device initialization, ideally before the first call to rte_eth_dev_configure(), is recommended to avoid possible failures due to conflicting settings.

Once effective, leaving isolated mode may not be possible depending on PMD implementation.

Additionally, the following functionality has no effect on the underlying port and may return errors such as ENOTSUP ("not supported"):

Toggling promiscuous mode.
Toggling allmulticast mode.
Configuring MAC addresses.
Configuring multicast addresses.
Configuring VLAN filters.
Configuring Rx filters through the legacy API (e.g. FDIR).
Configuring global RSS settings.

Parameters

	port_id	Port identifier of Ethernet device.
	set	Nonzero to enter isolated mode, attempt to leave it otherwise.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns: 0 on success, a negative errno value otherwise and rte_errno is set.

int rte_flow_error_set	(	struct rte_flow_error *	error,
		int	code,
		enum rte_flow_error_type	type,
		const void *	cause,
		const char *	message
	)

Initialize flow error structure.

Parameters

[out]	error	Pointer to flow error structure (may be NULL).
	code	Related error code (rte_errno).
	type	Cause field and error types.
	cause	Object responsible for the error.
	message	Human-readable error message.

Returns: Negative error code (errno value) and rte_errno is set.

__rte_deprecated size_t rte_flow_copy	(	struct rte_flow_desc *	fd,
		size_t	len,
		const struct rte_flow_attr *	attr,
		const struct rte_flow_item *	items,
		const struct rte_flow_action *	actions
	)

Deprecated:: Copy an rte_flow rule description.

This interface is kept for compatibility with older applications but is implemented as a wrapper to rte_flow_conv(). It is deprecated due to its lack of flexibility and reliance on a type unusable with C++ programs (struct rte_flow_desc).

Parameters

[in]	fd	Flow rule description.
[in]	len	Total size of allocated data for the flow description.
[in]	attr	Flow rule attributes.
[in]	items	Pattern specification (list terminated by the END pattern item).
[in]	actions	Associated actions (list terminated by the END action).

Returns: If len is greater or equal to the size of the flow, the total size of the flow description and its data. If len is lower than the size of the flow, the number of bytes that would have been written to desc had it been sufficient. Nothing is written.

__rte_experimental int rte_flow_conv	(	enum rte_flow_conv_op	op,
		void *	dst,
		size_t	size,
		const void *	src,
		struct rte_flow_error *	error
	)

Flow object conversion helper.

This function performs conversion of various flow API objects to a pre-allocated destination buffer. See enum rte_flow_conv_op for possible operations and details about each of them.

Since destination buffer must be large enough, it works in a manner reminiscent of snprintf():

If size is 0, dst may be a NULL pointer, otherwise dst must be non-NULL.
If positive, the returned value represents the number of bytes needed to store the conversion of src to dst according to op regardless of the size parameter.
Since no more than size bytes can be written to dst, output is truncated and may be inconsistent when the returned value is larger than that.
In case of conversion error, a negative error code is returned and dst contents are unspecified.

Parameters

	op	Operation to perform, related to the object type of `dst`.
[out]	dst	Destination buffer address. Must be suitably aligned by the caller.
	size	Destination buffer size in bytes.
[in]	src	Source object to copy. Depending on `op`, its type may differ from that of `dst`.
[out]	error	Perform verbose error reporting if not NULL. Initialized in case of error only.

Returns: The number of bytes required to convert src to dst on success, a negative errno value otherwise and rte_errno is set.

See also: rte_flow_conv_op

Variable Documentation

const struct rte_flow_item_any rte_flow_item_any_mask

static

Initial value:

= {
    .num = 0x00000000,
}

Default mask for RTE_FLOW_ITEM_TYPE_ANY.

Definition at line 444 of file rte_flow.h.

const struct rte_flow_item_vf rte_flow_item_vf_mask

static

Initial value:

= {
    .id = 0x00000000,
}

Default mask for RTE_FLOW_ITEM_TYPE_VF.

Definition at line 473 of file rte_flow.h.

const struct rte_flow_item_phy_port rte_flow_item_phy_port_mask

static

Initial value:

= {
    .index = 0x00000000,
}

Default mask for RTE_FLOW_ITEM_TYPE_PHY_PORT.

Definition at line 504 of file rte_flow.h.

const struct rte_flow_item_port_id rte_flow_item_port_id_mask

static

Initial value:

= {
    .id = 0xffffffff,
}

Default mask for RTE_FLOW_ITEM_TYPE_PORT_ID.

Definition at line 530 of file rte_flow.h.

const struct rte_flow_item_raw rte_flow_item_raw_mask

static

Initial value:

= {
    .relative = 1,
    .search = 1,
    .reserved = 0x3fffffff,
    .offset = 0xffffffff,
    .limit = 0xffff,
    .length = 0xffff,
    .pattern = NULL,
}

Default mask for RTE_FLOW_ITEM_TYPE_RAW.

Definition at line 565 of file rte_flow.h.

const struct rte_flow_item_eth rte_flow_item_eth_mask

static

Initial value:

= {
    .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
    .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
    .type = RTE_BE16(0x0000),
}

Default mask for RTE_FLOW_ITEM_TYPE_ETH.

Definition at line 595 of file rte_flow.h.

const struct rte_flow_item_vlan rte_flow_item_vlan_mask

static

Initial value:

= {
    .tci = RTE_BE16(0x0fff),
    .inner_type = RTE_BE16(0x0000),
}

Default mask for RTE_FLOW_ITEM_TYPE_VLAN.

Definition at line 618 of file rte_flow.h.

const struct rte_flow_item_ipv4 rte_flow_item_ipv4_mask

static

Initial value:

= {
    .hdr = {
        .src_addr = RTE_BE32(0xffffffff),
        .dst_addr = RTE_BE32(0xffffffff),
    },
}

Default mask for RTE_FLOW_ITEM_TYPE_IPV4.

Examples:: examples/ipsec-secgw/ipsec.c.

Definition at line 637 of file rte_flow.h.

const struct rte_flow_item_ipv6 rte_flow_item_ipv6_mask

static

Initial value:

= {
    .hdr = {
        .src_addr =
            "\xff\xff\xff\xff\xff\xff\xff\xff"
            "\xff\xff\xff\xff\xff\xff\xff\xff",
        .dst_addr =
            "\xff\xff\xff\xff\xff\xff\xff\xff"
            "\xff\xff\xff\xff\xff\xff\xff\xff",
    },
}

Default mask for RTE_FLOW_ITEM_TYPE_IPV6.

Examples:: examples/ipsec-secgw/ipsec.c.

Definition at line 659 of file rte_flow.h.

const struct rte_flow_item_icmp rte_flow_item_icmp_mask

static

Initial value:

= {
    .hdr = {
        .icmp_type = 0xff,
        .icmp_code = 0xff,
    },
}

Default mask for RTE_FLOW_ITEM_TYPE_ICMP.

Definition at line 682 of file rte_flow.h.

const struct rte_flow_item_udp rte_flow_item_udp_mask

static

Initial value:

= {
    .hdr = {
        .src_port = RTE_BE16(0xffff),
        .dst_port = RTE_BE16(0xffff),
    },
}

Default mask for RTE_FLOW_ITEM_TYPE_UDP.

Definition at line 701 of file rte_flow.h.

const struct rte_flow_item_tcp rte_flow_item_tcp_mask

static

Initial value:

= {
    .hdr = {
        .src_port = RTE_BE16(0xffff),
        .dst_port = RTE_BE16(0xffff),
    },
}

Default mask for RTE_FLOW_ITEM_TYPE_TCP.

Definition at line 720 of file rte_flow.h.

const struct rte_flow_item_sctp rte_flow_item_sctp_mask

static

Initial value:

= {
    .hdr = {
        .src_port = RTE_BE16(0xffff),
        .dst_port = RTE_BE16(0xffff),
    },
}

Default mask for RTE_FLOW_ITEM_TYPE_SCTP.

Definition at line 739 of file rte_flow.h.

const struct rte_flow_item_vxlan rte_flow_item_vxlan_mask

static

Initial value:

= {
    .vni = "\xff\xff\xff",
}

Default mask for RTE_FLOW_ITEM_TYPE_VXLAN.

Definition at line 761 of file rte_flow.h.

const struct rte_flow_item_e_tag rte_flow_item_e_tag_mask

static

Initial value:

= {
    .rsvd_grp_ecid_b = RTE_BE16(0x3fff),
}

Default mask for RTE_FLOW_ITEM_TYPE_E_TAG.

Definition at line 789 of file rte_flow.h.

const struct rte_flow_item_nvgre rte_flow_item_nvgre_mask

static

Initial value:

= {
    .tni = "\xff\xff\xff",
}

Default mask for RTE_FLOW_ITEM_TYPE_NVGRE.

Definition at line 814 of file rte_flow.h.

const struct rte_flow_item_mpls rte_flow_item_mpls_mask

static

Initial value:

= {
    .label_tc_s = "\xff\xff\xf0",
}

Default mask for RTE_FLOW_ITEM_TYPE_MPLS.

Definition at line 834 of file rte_flow.h.

const struct rte_flow_item_gre rte_flow_item_gre_mask

static

Initial value:

= {
    .protocol = RTE_BE16(0xffff),
}

Default mask for RTE_FLOW_ITEM_TYPE_GRE.

Definition at line 855 of file rte_flow.h.

const struct rte_flow_item_fuzzy rte_flow_item_fuzzy_mask

static

Initial value:

= {
    .thresh = 0xffffffff,
}

Default mask for RTE_FLOW_ITEM_TYPE_FUZZY.

Definition at line 883 of file rte_flow.h.

const struct rte_flow_item_gtp rte_flow_item_gtp_mask

static

Initial value:

= {
    .teid = RTE_BE32(0xffffffff),
}

Default mask for RTE_FLOW_ITEM_TYPE_GTP.

Definition at line 908 of file rte_flow.h.

const struct rte_flow_item_esp rte_flow_item_esp_mask

static

Initial value:

= {
    .hdr = {
        .spi = RTE_BE32(0xffffffff),
    },
}

Default mask for RTE_FLOW_ITEM_TYPE_ESP.

Examples:: examples/ipsec-secgw/ipsec.c.

Definition at line 924 of file rte_flow.h.

const struct rte_flow_item_geneve rte_flow_item_geneve_mask

static

Initial value:

= {
    .vni = "\xff\xff\xff",
}

Default mask for RTE_FLOW_ITEM_TYPE_GENEVE.

Definition at line 949 of file rte_flow.h.

const struct rte_flow_item_vxlan_gpe rte_flow_item_vxlan_gpe_mask

static

Initial value:

= {
    .vni = "\xff\xff\xff",
}

Default mask for RTE_FLOW_ITEM_TYPE_VXLAN_GPE.

Definition at line 969 of file rte_flow.h.

const struct rte_flow_item_arp_eth_ipv4 rte_flow_item_arp_eth_ipv4_mask

static

Initial value:

= {
    .sha.addr_bytes = "\xff\xff\xff\xff\xff\xff",
    .spa = RTE_BE32(0xffffffff),
    .tha.addr_bytes = "\xff\xff\xff\xff\xff\xff",
    .tpa = RTE_BE32(0xffffffff),
}

Default mask for RTE_FLOW_ITEM_TYPE_ARP_ETH_IPV4.

Definition at line 994 of file rte_flow.h.

const struct rte_flow_item_ipv6_ext rte_flow_item_ipv6_ext_mask

static

Initial value:

= {
    .next_hdr = 0xff,
}

Default mask for RTE_FLOW_ITEM_TYPE_IPV6_EXT.

Definition at line 1019 of file rte_flow.h.

const struct rte_flow_item_icmp6 rte_flow_item_icmp6_mask

static

Initial value:

= {
    .type = 0xff,
    .code = 0xff,
}

Default mask for RTE_FLOW_ITEM_TYPE_ICMP6.

Definition at line 1037 of file rte_flow.h.

const struct rte_flow_item_icmp6_nd_ns rte_flow_item_icmp6_nd_ns_mask

static

Initial value:

= {
    .target_addr =
        "\xff\xff\xff\xff\xff\xff\xff\xff"
        "\xff\xff\xff\xff\xff\xff\xff\xff",
}

Default mask for RTE_FLOW_ITEM_TYPE_ICMP6_ND_NS.

Definition at line 1059 of file rte_flow.h.

const struct rte_flow_item_icmp6_nd_na rte_flow_item_icmp6_nd_na_mask

static

Initial value:

= {
    .target_addr =
        "\xff\xff\xff\xff\xff\xff\xff\xff"
        "\xff\xff\xff\xff\xff\xff\xff\xff",
}

Default mask for RTE_FLOW_ITEM_TYPE_ICMP6_ND_NA.

Definition at line 1086 of file rte_flow.h.

const struct rte_flow_item_icmp6_nd_opt rte_flow_item_icmp6_nd_opt_mask

static

Initial value:

= {
    .type = 0xff,
}

Default mask for RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT.

Definition at line 1112 of file rte_flow.h.

const struct rte_flow_item_icmp6_nd_opt_sla_eth rte_flow_item_icmp6_nd_opt_sla_eth_mask

static

Initial value:

= {
    .sla.addr_bytes = "\xff\xff\xff\xff\xff\xff",
}

Default mask for RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT_SLA_ETH.

Definition at line 1137 of file rte_flow.h.

const struct rte_flow_item_icmp6_nd_opt_tla_eth rte_flow_item_icmp6_nd_opt_tla_eth_mask

static

Initial value:

= {
    .tla.addr_bytes = "\xff\xff\xff\xff\xff\xff",
}

Default mask for RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT_TLA_ETH.

Definition at line 1162 of file rte_flow.h.

const struct rte_flow_item_meta rte_flow_item_meta_mask

static

Initial value:

= {
    .data = RTE_BE32(UINT32_MAX),
}

Default mask for RTE_FLOW_ITEM_TYPE_META.

Definition at line 1178 of file rte_flow.h.

Data Structures

Enumerations

Functions

Variables

Detailed Description

Enumeration Type Documentation

Function Documentation

Variable Documentation