6. AMD CCP Poll Mode Driver

This code provides the initial implementation of the ccp poll mode driver. The CCP poll mode driver library (librte_pmd_ccp) implements support for AMD’s cryptographic co-processor (CCP). The CCP PMD is a virtual crypto poll mode driver which schedules crypto operations to one or more available CCP hardware engines on the platform. The CCP PMD provides poll mode crypto driver support for the following hardware accelerator devices:

AMD Cryptographic Co-processor (0x1456)
AMD Cryptographic Co-processor (0x1468)

6.1. Features

CCP crypto PMD has support for:

Cipher algorithms:

  • RTE_CRYPTO_CIPHER_AES_CBC
  • RTE_CRYPTO_CIPHER_AES_ECB
  • RTE_CRYPTO_CIPHER_AES_CTR
  • RTE_CRYPTO_CIPHER_3DES_CBC

Hash algorithms:

  • RTE_CRYPTO_AUTH_SHA1
  • RTE_CRYPTO_AUTH_SHA1_HMAC
  • RTE_CRYPTO_AUTH_SHA224
  • RTE_CRYPTO_AUTH_SHA224_HMAC
  • RTE_CRYPTO_AUTH_SHA256
  • RTE_CRYPTO_AUTH_SHA256_HMAC
  • RTE_CRYPTO_AUTH_SHA384
  • RTE_CRYPTO_AUTH_SHA384_HMAC
  • RTE_CRYPTO_AUTH_SHA512
  • RTE_CRYPTO_AUTH_SHA512_HMAC
  • RTE_CRYPTO_AUTH_MD5_HMAC
  • RTE_CRYPTO_AUTH_AES_CMAC
  • RTE_CRYPTO_AUTH_SHA3_224
  • RTE_CRYPTO_AUTH_SHA3_224_HMAC
  • RTE_CRYPTO_AUTH_SHA3_256
  • RTE_CRYPTO_AUTH_SHA3_256_HMAC
  • RTE_CRYPTO_AUTH_SHA3_384
  • RTE_CRYPTO_AUTH_SHA3_384_HMAC
  • RTE_CRYPTO_AUTH_SHA3_512
  • RTE_CRYPTO_AUTH_SHA3_512_HMAC

AEAD algorithms:

  • RTE_CRYPTO_AEAD_AES_GCM

6.2. Installation

To compile ccp PMD, it has to be enabled in the config/common_base file and openssl packages have to be installed in the build environment.

  • CONFIG_RTE_LIBRTE_PMD_CCP=y

For Ubuntu 16.04 LTS use below to install openssl in the build system:

sudo apt-get install openssl

This code was verified on Ubuntu 16.04.

6.3. Initialization

Bind the CCP devices to DPDK UIO driver module before running the CCP PMD stack. e.g. for the 0x1456 device:

cd to the top-level DPDK directory
modprobe uio
insmod ./build/kmod/igb_uio.ko
echo "1022 1456" > /sys/bus/pci/drivers/igb_uio/new_id

Another way to bind the CCP devices to DPDK UIO driver is by using the dpdk-devbind.py script. The following command assumes BFD as 0000:09:00.2:

cd to the top-level DPDK directory
./usertools/dpdk-devbind.py -b igb_uio 0000:09:00.2

In order to enable the ccp crypto PMD, user must set CONFIG_RTE_LIBRTE_PMD_CCP=y in config/common_base.

To use the PMD in an application, user must:

  • Call rte_vdev_init(“crypto_ccp”) within the application.
  • Use –vdev=”crypto_ccp” in the EAL options, which will call rte_vdev_init() internally.

The following parameters (all optional) can be provided in the previous two calls:

  • socket_id: Specify the socket where the memory for the device is going to be allocated. (by default, socket_id will be the socket where the core that is creating the PMD is running on).
  • max_nb_queue_pairs: Specify the maximum number of queue pairs in the device.
  • max_nb_sessions: Specify the maximum number of sessions that can be created (2048 by default).
  • ccp_auth_opt: Specify authentication operations to perform on CPU using openssl APIs.

To validate ccp pmd, l2fwd-crypto example can be used with following command:

sudo ./build/l2fwd-crypto -l 1 -n 4 --vdev "crypto_ccp" -- -p 0x1
--chain CIPHER_HASH --cipher_op ENCRYPT --cipher_algo aes-cbc
--cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f
--cipher_iv 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:ff
--auth_op GENERATE --auth_algo sha1-hmac
--auth_key 11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11

The CCP PMD also supports computing authentication over CPU with cipher offloaded to CCP. To enable this feature, pass an additional argument as ccp_auth_opt=1 to –vdev parameters as following:

sudo ./build/l2fwd-crypto -l 1 -n 4 --vdev "crypto_ccp,ccp_auth_opt=1" -- -p 0x1
--chain CIPHER_HASH --cipher_op ENCRYPT --cipher_algo aes-cbc
--cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f
--cipher_iv 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:ff
--auth_op GENERATE --auth_algo sha1-hmac
--auth_key 11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11

6.4. Limitations

  • Chained mbufs are not supported.
  • MD5_HMAC is supported only for CPU based authentication.