Sample Applications User Guides

• 1. Introduction to the DPDK Sample Applications
  • 1.1. Running Sample Applications
  • 1.2. The DPDK Sample Applications
• 2. Compiling the Sample Applications
  • 2.1. To compile all the sample applications
  • 2.2. To compile a single application
  • 2.3. To cross compile the sample application(s)
• 3. Command Line Sample Application
  • 3.1. Overview
  • 3.2. Compiling the Application
  • 3.3. Running the Application
  • 3.4. Explanation
• 4. Ethtool Sample Application
  • 4.1. Compiling the Application
  • 4.2. Running the Application
  • 4.3. Using the application
  • 4.4. Explanation
  • 4.5. Ethtool interface
• 5. Hello World Sample Application
  • 5.1. Compiling the Application
  • 5.2. Running the Application
  • 5.3. Explanation
• 6. Basic Forwarding Sample Application
  • 6.1. Compiling the Application
  • 6.2. Running the Application
  • 6.3. Explanation
• 7. RX/TX Callbacks Sample Application
  • 7.1. Compiling the Application
  • 7.2. Running the Application
  • 7.3. Explanation
• 8. Flow Classify Sample Application
  • 8.1. Compiling the Application
  • 8.2. Running the Application
  • 8.3. Sample ipv4_rules_file.txt
  • 8.4. Explanation
• 9. Basic RTE Flow Filtering Sample Application
  • 9.1. Compiling the Application
  • 9.2. Running the Application
  • 9.3. Explanation
• 10. IP Fragmentation Sample Application
  • 10.1. Overview
  • 10.2. Compiling the Application
  • 10.3. Running the Application
• 11. IPv4 Multicast Sample Application
  • 11.1. Overview
  • 11.2. Compiling the Application
  • 11.3. Running the Application
  • 11.4. Explanation
• 12. IP Reassembly Sample Application
  • 12.1. Overview
  • 12.2. Compiling the Application
  • 12.3. Running the Application
  • 12.4. Explanation
• 13. Kernel NIC Interface Sample Application
  • 13.1. Overview
  • 13.2. Compiling the Application
  • 13.3. Running the kni Example Application
  • 13.4. KNI Operations
  • 13.5. Explanation
• 14. Keep Alive Sample Application
  • 14.1. Overview
  • 14.2. Compiling the Application
  • 14.3. Running the Application
  • 14.4. Explanation
• 15. Packet copying using Intel® QuickData Technology
  • 15.1. Overview
  • 15.2. Compiling the Application
  • 15.3. Running the Application
  • 15.4. Explanation
• 16. L2 Forwarding with Crypto Sample Application
  • 16.1. Overview
  • 16.2. Compiling the Application
  • 16.3. Running the Application
  • 16.4. Explanation
• 17. L2 Forwarding Sample Application (in Real and Virtualized Environments) with core load statistics.
  • 17.1. Overview
  • 17.2. Compiling the Application
  • 17.3. Running the Application
  • 17.4. Explanation
• 18. L2 Forwarding Sample Application (in Real and Virtualized Environments)
  • 18.1. Overview
  • 18.2. Compiling the Application
  • 18.3. Running the Application
  • 18.4. Explanation
• 19. L2 Forwarding Eventdev Sample Application
  • 19.1. Overview
  • 19.2. Compiling the Application
  • 19.3. Running the Application
  • 19.4. Explanation
• 20. L2 Forwarding Sample Application with Cache Allocation Technology (CAT)
  • 20.1. Compiling the Application
  • 20.2. Running the Application
  • 20.3. Explanation
• 21. L3 Forwarding Sample Application
  • 21.1. Overview
  • 21.2. Compiling the Application
  • 21.3. Running the Application
  • 21.4. Explanation
• 22. L3 Forwarding Graph Sample Application
  • 22.1. Overview
  • 22.2. Compiling the Application
  • 22.3. Running the Application
  • 22.4. Explanation
• 23. L3 Forwarding with Power Management Sample Application
  • 23.1. Introduction
  • 23.2. Overview
  • 23.3. Compiling the Application
  • 23.4. Running the Application
  • 23.5. Explanation
  • 23.6. Empty Poll Mode
  • 23.7. Telemetry Mode
• 24. L3 Forwarding with Access Control Sample Application
  • 24.1. Overview
  • 24.2. Compiling the Application
  • 24.3. Running the Application
  • 24.4. Explanation
• 25. Link Status Interrupt Sample Application
  • 25.1. Overview
  • 25.2. Compiling the Application
  • 25.3. Running the Application
  • 25.4. Explanation
• 26. Server-Node EFD Sample Application
  • 26.1. Overview
  • 26.2. Compiling the Application
  • 26.3. Running the Application
  • 26.4. Explanation
• 27. Service Cores Sample Application
  • 27.1. Compiling the Application
  • 27.2. Running the Application
  • 27.3. Explanation
• 28. Multi-process Sample Application
  • 28.1. Example Applications
• 29. QoS Metering Sample Application
  • 29.1. Overview
  • 29.2. Compiling the Application
  • 29.3. Running the Application
  • 29.4. Explanation
• 30. QoS Scheduler Sample Application
  • 30.1. Overview
  • 30.2. Compiling the Application
  • 30.3. Running the Application
  • 30.4. Explanation
• 31. Timer Sample Application
  • 31.1. Compiling the Application
  • 31.2. Running the Application
  • 31.3. Explanation
• 32. Packet Ordering Application
  • 32.1. Overview
  • 32.2. Compiling the Application
  • 32.3. Running the Application
• 33. VMDQ and DCB Forwarding Sample Application
  • 33.1. Overview
  • 33.2. Compiling the Application
  • 33.3. Running the Application
  • 33.4. Explanation
• 34. VMDq Forwarding Sample Application
  • 34.1. Overview
  • 34.2. Compiling the Application
  • 34.3. Running the Application
  • 34.4. Explanation
• 35. Vhost Sample Application
  • 35.1. Testing steps
  • 35.2. Inject packets
  • 35.3. Parameters
  • 35.4. Common Issues
• 36. Vhost_blk Sample Application
  • 36.1. Testing steps
  • 36.2. Compiling the Application
• 37. Vhost_Crypto Sample Application
  • 37.1. Testing steps
  • 37.2. Compiling the Application
• 38. Vdpa Sample Application
  • 38.1. Testing steps
• 39. Internet Protocol (IP) Pipeline Application
  • 39.1. Application overview
  • 39.2. Running the application
  • 39.3. Application stages
  • 39.4. Examples
  • 39.5. Command Line Interface (CLI)
• 40. Test Pipeline Application
  • 40.1. Overview
  • 40.2. Compiling the Application
  • 40.3. Running the Application
• 41. Eventdev Pipeline Sample Application
  • 41.1. Compiling the Application
  • 41.2. Running the Application
  • 41.3. Observing the Application
• 42. Distributor Sample Application
  • 42.1. Overview
  • 42.2. Compiling the Application
  • 42.3. Running the Application
  • 42.4. Explanation
  • 42.5. Intel SST-BF Support
  • 42.6. Debug Logging Support
  • 42.7. Statistics
  • 42.8. Application Initialization
• 43. Virtual Machine Power Management Application
  • 43.1. Sample Application Architecture Overview
  • 43.2. Configuration
  • 43.3. Compiling and Running the Host Application
  • 43.4. Compiling and Running the Guest Applications
  • 43.5. JSON Interface for Power Management Requests and Policies
• 44. TEP termination Sample Application
  • 44.1. Background
  • 44.2. Sample Code Overview
  • 44.3. Supported Distributions
  • 44.4. Compiling the Sample Code
  • 44.5. Running the Sample Code
  • 44.6. Running the Virtual Machine (QEMU)
  • 44.7. Running DPDK in the Virtual Machine
  • 44.8. Passing Traffic to the Virtual Machine Device
• 45. PTP Client Sample Application
  • 45.1. Limitations
  • 45.2. How the Application Works
  • 45.3. Compiling the Application
  • 45.4. Running the Application
  • 45.5. Code Explanation
• 46. Performance Thread Sample Application
  • 46.1. Overview
  • 46.2. Compiling the Application
  • 46.3. Running the Application
  • 46.4. Explanation
  • 46.5. The L-thread subsystem
• 47. Federal Information Processing Standards (FIPS) CryptoDev Validation
  • 47.1. Overview
  • 47.2. Limitations
  • 47.3. Application Information
  • 47.4. Compiling the Application
  • 47.5. Running the Application
• 48. IPsec Security Gateway Sample Application
  • 48.1. Overview
  • 48.2. Constraints
  • 48.3. Compiling the Application
  • 48.4. Running the Application
  • 48.5. Configurations
  • 48.6. Test directory
• 49. Loop-back Sample Application using Baseband Device (bbdev)
  • 49.1. Overview
  • 49.2. Limitations
  • 49.3. Compiling the Application
  • 49.4. Running the Application
  • 49.5. Using Packet Generator with baseband device sample application
• 50. NTB Sample Application
  • 50.1. Compiling the Application
  • 50.2. Running the Application
  • 50.3. Command-line Options
  • 50.4. Using the application