11. Marvell OCTEON TX2 Crypto Poll Mode Driver

The OCTEON TX2 crypto poll mode driver provides support for offloading cryptographic operations to cryptographic accelerator units on the OCTEON TX2 ® family of processors (CN9XXX).

More information about OCTEON TX2 SoCs may be obtained from https://www.marvell.com

11.1. Features

The OCTEON TX2 crypto PMD has support for:

11.1.1. Symmetric Crypto Algorithms

Cipher algorithms:

  • RTE_CRYPTO_CIPHER_NULL
  • RTE_CRYPTO_CIPHER_3DES_CBC
  • RTE_CRYPTO_CIPHER_3DES_ECB
  • RTE_CRYPTO_CIPHER_AES_CBC
  • RTE_CRYPTO_CIPHER_AES_CTR
  • RTE_CRYPTO_CIPHER_AES_XTS
  • RTE_CRYPTO_CIPHER_DES_CBC
  • RTE_CRYPTO_CIPHER_KASUMI_F8
  • RTE_CRYPTO_CIPHER_SNOW3G_UEA2
  • RTE_CRYPTO_CIPHER_ZUC_EEA3

Hash algorithms:

  • RTE_CRYPTO_AUTH_NULL
  • RTE_CRYPTO_AUTH_AES_GMAC
  • RTE_CRYPTO_AUTH_KASUMI_F9
  • RTE_CRYPTO_AUTH_MD5
  • RTE_CRYPTO_AUTH_MD5_HMAC
  • RTE_CRYPTO_AUTH_SHA1
  • RTE_CRYPTO_AUTH_SHA1_HMAC
  • RTE_CRYPTO_AUTH_SHA224
  • RTE_CRYPTO_AUTH_SHA224_HMAC
  • RTE_CRYPTO_AUTH_SHA256
  • RTE_CRYPTO_AUTH_SHA256_HMAC
  • RTE_CRYPTO_AUTH_SHA384
  • RTE_CRYPTO_AUTH_SHA384_HMAC
  • RTE_CRYPTO_AUTH_SHA512
  • RTE_CRYPTO_AUTH_SHA512_HMAC
  • RTE_CRYPTO_AUTH_SNOW3G_UIA2
  • RTE_CRYPTO_AUTH_ZUC_EIA3

AEAD algorithms:

  • RTE_CRYPTO_AEAD_AES_GCM

11.1.2. Asymmetric Crypto Algorithms

  • RTE_CRYPTO_ASYM_XFORM_RSA
  • RTE_CRYPTO_ASYM_XFORM_MODEX

11.2. Installation

The OCTEON TX2 crypto PMD may be compiled natively on an OCTEON TX2 platform or cross-compiled on an x86 platform.

Enable OCTEON TX2 crypto PMD in your config file:

  • CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_CRYPTO=y

Refer to Marvell OCTEON TX2 Platform Guide for instructions to build your DPDK application.

Note

The OCTEON TX2 crypto PMD uses services from the kernel mode OCTEON TX2 crypto PF driver in linux. This driver is included in the OCTEON TX SDK.

11.3. Initialization

List the CPT PF devices available on your OCTEON TX2 platform:

lspci -d:a0fd

a0fd is the CPT PF device id. You should see output similar to:

0002:10:00.0 Class 1080: Device 177d:a0fd

Set sriov_numvfs on the CPT PF device, to create a VF:

echo 1 > /sys/bus/pci/drivers/octeontx2-cpt/0002:10:00.0/sriov_numvfs

Bind the CPT VF device to the vfio_pci driver:

echo '177d a0fe' > /sys/bus/pci/drivers/vfio-pci/new_id
echo 0002:10:00.1 > /sys/bus/pci/devices/0002:10:00.1/driver/unbind
echo 0002:10:00.1 > /sys/bus/pci/drivers/vfio-pci/bind

Another way to bind the VF would be to use the dpdk-devbind.py script:

cd <dpdk directory>
./usertools/dpdk-devbind.py -u 0002:10:00.1
./usertools/dpdk-devbind.py -b vfio-pci 0002:10.00.1

Note

Ensure that sufficient huge pages are available for your application:

echo 8 > /sys/kernel/mm/hugepages/hugepages-524288kB/nr_hugepages

Refer to Use of Hugepages in the Linux Environment for more details.

11.4. Debugging Options

Table 11.84 OCTEON TX2 crypto PMD debug options
# Component EAL log command
1 CPT –log-level=’pmd.crypto.octeontx2,8’

11.5. Testing

The symmetric crypto operations on OCTEON TX2 crypto PMD may be verified by running the test application:

./test
RTE>>cryptodev_octeontx2_autotest

The asymmetric crypto operations on OCTEON TX2 crypto PMD may be verified by running the test application:

./test
RTE>>cryptodev_octeontx2_asym_autotest