rte_eth_ctrl.h File Reference

Go to the source code of this file.

Data Structures
struct	rte_eth_mac_filter
struct	rte_eth_ethertype_filter
struct	rte_eth_flex_filter
struct	rte_eth_syn_filter
struct	rte_eth_ntuple_filter
struct	rte_eth_tunnel_filter_conf
struct	rte_eth_l2_flow
struct	rte_eth_ipv4_flow
struct	rte_eth_udpv4_flow
struct	rte_eth_tcpv4_flow
struct	rte_eth_sctpv4_flow
struct	rte_eth_ipv6_flow
struct	rte_eth_udpv6_flow
struct	rte_eth_tcpv6_flow
struct	rte_eth_sctpv6_flow
union	rte_eth_fdir_flow
struct	rte_eth_fdir_flow_ext
struct	rte_eth_fdir_input
struct	rte_eth_fdir_action
struct	rte_eth_fdir_filter
struct	rte_eth_fdir_masks
struct	rte_eth_flex_payload_cfg
struct	rte_eth_fdir_flex_mask
struct	rte_eth_fdir_flex_conf
struct	rte_eth_fdir_info
struct	rte_eth_fdir_stats
struct	rte_eth_hash_global_conf
struct	rte_eth_hash_filter_info

Macros
#define	RTE_ETHTYPE_FLAGS_MAC   0x0001
#define	RTE_ETHTYPE_FLAGS_DROP   0x0002
#define	RTE_FLEX_FILTER_MAXLEN   128
#define	RTE_FLEX_FILTER_MASK_SIZE   (RTE_ALIGN(RTE_FLEX_FILTER_MAXLEN, CHAR_BIT) / CHAR_BIT)
#define	RTE_NTUPLE_FLAGS_DST_IP   0x0001
#define	RTE_NTUPLE_FLAGS_SRC_IP   0x0002
#define	RTE_NTUPLE_FLAGS_DST_PORT   0x0004
#define	RTE_NTUPLE_FLAGS_SRC_PORT   0x0008
#define	RTE_NTUPLE_FLAGS_PROTO   0x0010
#define	RTE_NTUPLE_FLAGS_TCP_FLAG   0x0020
#define	ETH_TUNNEL_FILTER_OMAC   0x01
#define	ETH_TUNNEL_FILTER_OIP   0x02
#define	ETH_TUNNEL_FILTER_TENID   0x04
#define	ETH_TUNNEL_FILTER_IMAC   0x08
#define	ETH_TUNNEL_FILTER_IVLAN   0x10
#define	ETH_TUNNEL_FILTER_IIP   0x20

Enumerations
enum	rte_filter_type
enum	rte_filter_op {   RTE_ETH_FILTER_NOP = 0, RTE_ETH_FILTER_ADD, RTE_ETH_FILTER_UPDATE, RTE_ETH_FILTER_DELETE,   RTE_ETH_FILTER_FLUSH, RTE_ETH_FILTER_GET, RTE_ETH_FILTER_SET, RTE_ETH_FILTER_INFO,   RTE_ETH_FILTER_STATS }
enum	rte_mac_filter_type { RTE_MAC_PERFECT_MATCH = 1, RTE_MACVLAN_PERFECT_MATCH, RTE_MAC_HASH_MATCH, RTE_MACVLAN_HASH_MATCH }
enum	rte_eth_tunnel_type
enum	rte_tunnel_iptype { RTE_TUNNEL_IPTYPE_IPV4 = 0, RTE_TUNNEL_IPTYPE_IPV6 }
enum	rte_eth_fdir_behavior
enum	rte_eth_fdir_status { RTE_ETH_FDIR_NO_REPORT_STATUS = 0, RTE_ETH_FDIR_REPORT_ID, RTE_ETH_FDIR_REPORT_ID_FLEX_4, RTE_ETH_FDIR_REPORT_FLEX_8 }
enum	rte_eth_payload_type
enum	rte_fdir_mode { RTE_FDIR_MODE_NONE = 0, RTE_FDIR_MODE_SIGNATURE, RTE_FDIR_MODE_PERFECT }
enum	rte_eth_hash_filter_info_type { , RTE_ETH_HASH_FILTER_SYM_HASH_ENA_PER_PORT, RTE_ETH_HASH_FILTER_GLOBAL_CONFIG }
enum	rte_eth_hash_function { , RTE_ETH_HASH_FUNCTION_TOEPLITZ, RTE_ETH_HASH_FUNCTION_SIMPLE_XOR }

Detailed Description

Ethernet device features and related data structures used by control APIs should be defined in this file.

Definition in file rte_eth_ctrl.h.

Macro Definition Documentation

#define RTE_ETHTYPE_FLAGS_MAC   0x0001

Define all structures for Ethertype Filter type.If set, compare mac

Definition at line 137 of file rte_eth_ctrl.h.

#define RTE_ETHTYPE_FLAGS_DROP   0x0002

If set, drop packet when match

Definition at line 138 of file rte_eth_ctrl.h.

#define RTE_FLEX_FILTER_MAXLEN   128

bytes to use in flex filter.

Definition at line 152 of file rte_eth_ctrl.h.

#define RTE_FLEX_FILTER_MASK_SIZE   (RTE_ALIGN(RTE_FLEX_FILTER_MAXLEN, CHAR_BIT) / CHAR_BIT)

mask bytes in flex filter.

Definition at line 153 of file rte_eth_ctrl.h.

#define RTE_NTUPLE_FLAGS_DST_IP   0x0001

Define all structures for ntuple Filter type.If set, dst_ip is part of ntuple

Definition at line 186 of file rte_eth_ctrl.h.

#define RTE_NTUPLE_FLAGS_SRC_IP   0x0002

If set, src_ip is part of ntuple

Definition at line 187 of file rte_eth_ctrl.h.

#define RTE_NTUPLE_FLAGS_DST_PORT   0x0004

If set, dst_port is part of ntuple

Definition at line 188 of file rte_eth_ctrl.h.

#define RTE_NTUPLE_FLAGS_SRC_PORT   0x0008

If set, src_port is part of ntuple

Definition at line 189 of file rte_eth_ctrl.h.

#define RTE_NTUPLE_FLAGS_PROTO   0x0010

If set, protocol is part of ntuple

Definition at line 190 of file rte_eth_ctrl.h.

#define RTE_NTUPLE_FLAGS_TCP_FLAG   0x0020

If set, tcp flag is involved

Definition at line 191 of file rte_eth_ctrl.h.

#define ETH_TUNNEL_FILTER_OMAC   0x01

filter type of tunneling packetfilter by outer MAC addr

Definition at line 253 of file rte_eth_ctrl.h.

#define ETH_TUNNEL_FILTER_OIP   0x02

filter by outer IP Addr

Definition at line 254 of file rte_eth_ctrl.h.

#define ETH_TUNNEL_FILTER_TENID   0x04

filter by tenant ID

Definition at line 255 of file rte_eth_ctrl.h.

#define ETH_TUNNEL_FILTER_IMAC   0x08

filter by inner MAC addr

Definition at line 256 of file rte_eth_ctrl.h.

#define ETH_TUNNEL_FILTER_IVLAN   0x10

filter by inner VLAN ID

Definition at line 257 of file rte_eth_ctrl.h.

#define ETH_TUNNEL_FILTER_IIP   0x20

filter by inner IP addr

Definition at line 258 of file rte_eth_ctrl.h.

Enumeration Type Documentation

enum rte_filter_type

Feature filter types

Definition at line 82 of file rte_eth_ctrl.h.

enum rte_filter_op

Generic operations on filters

Enumerator:

RTE_ETH_FILTER_NOP	used to check whether the type filter is supported
RTE_ETH_FILTER_ADD	add filter entry
RTE_ETH_FILTER_UPDATE	update filter entry
RTE_ETH_FILTER_DELETE	delete filter entry
RTE_ETH_FILTER_FLUSH	flush all entries
RTE_ETH_FILTER_GET	get filter entry
RTE_ETH_FILTER_SET	configurations
RTE_ETH_FILTER_INFO	retrieve information
RTE_ETH_FILTER_STATS	retrieve statistics

Definition at line 98 of file rte_eth_ctrl.h.

enum rte_mac_filter_type

MAC filter type

Enumerator:

RTE_MAC_PERFECT_MATCH	exact match of MAC addr.
RTE_MACVLAN_PERFECT_MATCH	exact match of MAC addr and VLAN ID.
RTE_MAC_HASH_MATCH	hash match of MAC addr.
RTE_MACVLAN_HASH_MATCH	hash match of MAC addr and exact match of VLAN ID.

Definition at line 115 of file rte_eth_ctrl.h.

enum rte_eth_tunnel_type

Tunneled type.

Definition at line 241 of file rte_eth_ctrl.h.

enum rte_tunnel_iptype

Select IPv4 or IPv6 for tunnel filters.

Enumerator:

RTE_TUNNEL_IPTYPE_IPV4	IPv4.
RTE_TUNNEL_IPTYPE_IPV6	IPv6.

Definition at line 274 of file rte_eth_ctrl.h.

enum rte_eth_fdir_behavior

Behavior will be taken if FDIR match

Definition at line 421 of file rte_eth_ctrl.h.

enum rte_eth_fdir_status

Flow director report status It defines what will be reported if FDIR entry is matched.

Enumerator:

RTE_ETH_FDIR_NO_REPORT_STATUS	Report nothing.
RTE_ETH_FDIR_REPORT_ID	Only report FD ID.
RTE_ETH_FDIR_REPORT_ID_FLEX_4	Report FD ID and 4 flex bytes.
RTE_ETH_FDIR_REPORT_FLEX_8	Report 8 flex bytes.

Definition at line 430 of file rte_eth_ctrl.h.

enum rte_eth_payload_type

Payload type

Definition at line 477 of file rte_eth_ctrl.h.

enum rte_fdir_mode

Flow Director setting modes: none, signature or perfect.

Enumerator:

RTE_FDIR_MODE_NONE	Disable FDIR support.
RTE_FDIR_MODE_SIGNATURE	Enable FDIR signature filter mode.
RTE_FDIR_MODE_PERFECT	Enable FDIR perfect filter mode.

Definition at line 525 of file rte_eth_ctrl.h.

enum rte_eth_hash_filter_info_type

Hash filter information types.

• RTE_ETH_HASH_FILTER_SYM_HASH_ENA_PER_PORT is for getting/setting the information/configuration of 'symmetric hash enable' per port.
• RTE_ETH_HASH_FILTER_GLOBAL_CONFIG is for getting/setting the global configurations of hash filters. Those global configurations are valid for all ports of the same NIC.

Enumerator:

RTE_ETH_HASH_FILTER_SYM_HASH_ENA_PER_PORT	Symmetric hash enable per port
RTE_ETH_HASH_FILTER_GLOBAL_CONFIG	Configure globally for hash filter

Definition at line 596 of file rte_eth_ctrl.h.

enum rte_eth_hash_function

Hash function types.

Enumerator:

RTE_ETH_HASH_FUNCTION_TOEPLITZ	Toeplitz
RTE_ETH_HASH_FUNCTION_SIMPLE_XOR	Simple XOR

Definition at line 608 of file rte_eth_ctrl.h.