1. DPDK Release 22.11

1.1. New Features

  • Added initial LoongArch architecture support.

    Added EAL implementation for LoongArch architecture. The initial port was tested on Loongson 3A5000, Loongson 3C5000 and Loongson 3C5000L. In theory this implementation should work with any target based on LoongArch ISA.

  • Added support for multiple mbuf pools per ethdev Rx queue.

    Added a capability which allows an application to provide many mempools of different size, and PMDs and/or NICs to choose a memory pool based on the packet’s length and/or Rx buffer availability.

  • Added support for congestion management in ethdev.

    Added new API functions rte_eth_cman_config_init(), rte_eth_cman_config_get(), rte_eth_cman_config_set() and rte_eth_cman_info_get() to support congestion management.

  • Added protocol header based buffer split.

    • Added rte_eth_buffer_split_get_supported_hdr_ptypes() to get supported header protocols to split at.
    • Added support for protocol-based buffer split using new proto_hdr field in structure rte_eth_rxseg_split.
  • Added proactive error handling mode for ethdev.

    Added proactive error handling mode for ethdev, and introduced three new events: RTE_ETH_EVENT_ERR_RECOVERING to report that the port is recovering from an error, RTE_ETH_EVENT_RECOVER_SUCCESS and RTE_ETH_EVENT_RECOVER_FAILED.

  • Added ethdev Rx/Tx descriptor dump API.

    Added the ethdev Rx/Tx descriptor dump API which provides functions for querying descriptor from device. The descriptor information differs in different NICs. The information demonstrates I/O process which is important for debug. The dump format is vendor-specific.

  • Added ethdev hairpin memory configuration options.

    Added new configuration flags for hairpin queues in rte_eth_hairpin_conf:

    • use_locked_device_memory
    • use_rte_memory
    • force_memory

    Each flag has a corresponding capability flag in struct rte_eth_hairpin_queue_cap.

  • Added strict queue to pre-configuration flow hints.

    • Added flags option to rte_flow_configure and rte_flow_info_get.
    • Added RTE_FLOW_PORT_FLAG_STRICT_QUEUE flag to indicate all operations for a given flow rule will strictly happen on the same flow queue.
  • Added configuration for asynchronous flow connection tracking.

    Added connection tracking action number hint to rte_flow_configure and rte_flow_info_get. The PMD can prepare the connection tracking resources according to the hint.

  • Added support for queue-based async query in flow API.

    Added new function rte_flow_async_action_handle_query() to query the action asynchronously.

  • Extended metering and marking support in the flow API.

    • Added METER_COLOR item to match color marker set by a meter.
    • Added ability to set color marker via modify field flow API.
    • Added meter API to get a pointer to the profile/policy by their ID.
    • Added METER_MARK action for metering with lockless profile/policy access.
  • Added flow offload action to route packets to kernel.

    Added new flow action which allows an application to re-route packets directly to the kernel without software involvement.

  • Updated AF_XDP driver.

    • Updated AF_XDP driver to make it compatible with libbpf v0.8.0 (when used with libxdp).
  • Updated AMD Pensando ionic driver.

    • Updated ionic driver to reflect that Pensando has been acquired by AMD.
    • Enhanced data path to provide substantial performance improvements.
    • Added support for mbuf fast free.
    • Added support for advertising packet types.
    • Added support for descriptor status functions.
    • Added Q-in-CMB feature controlled by device option ionic_cmb.
    • Added optimized handlers for non-scattered Rx and Tx.
  • Added GVE net PMD.

    • Added the new gve net driver for Google Virtual Ethernet devices.
    • See the GVE poll mode driver NIC guide for more details on this new driver.
  • Updated Intel iavf driver.

    • Added flow subscription support.
  • Updated Intel ice driver.

    • Added protocol based buffer split support in scalar path.
  • Added Intel idpf driver.

    Added the new idpf net driver for Intel® Infrastructure Processing Unit (Intel® IPU) E2100. See the IDPF Poll Mode Driver NIC guide for more details on this new driver.

  • Updated Marvell cnxk driver.

    • Added support for flow action REPRESENTED_PORT.
    • Added support for congestion management.
  • Added Microsoft mana driver.

    The driver has been disabled by default because of a, currently, missing dependency.

  • Updated Netronome nfp driver.

    Added flow API support:

    • Added support for the flower firmware.
    • Added the flower service infrastructure.
    • Added the control message interactive channels between PMD and firmware.
    • Added support for a representor port.
  • Updated NVIDIA mlx5 driver.

    • Added full support for queue-based async hardware steering.
      • Support of FDB.
      • Support of control flow and isolate mode.
      • Support of conntrack.
      • Support of counter.
      • Support of aging.
      • Support of meter.
      • Support of modify fields.
  • Updated NXP dpaa2 driver.

    • Added support for flow action REPRESENTED_PORT.
  • Updated Wangxun ngbe driver.

    • Added support to set device link down/up.
  • Added DMA vChannel unconfiguration for async vhost.

    Added support to unconfigure DMA vChannel that is no longer used by the vhost library.

  • Added non-blocking notify API to vhost library.

    Added rte_vhost_vring_call_nonblock API to notify the guest that used descriptors have been added to the vring in n aon-blocking way. The user should check the return value of this API and try again if needed.

  • Added support for MACsec in rte_security.

    Added MACsec transform for rte_security session and added new API to configure security associations (SA) and secure channels (SC).

  • Added new algorithms to cryptodev.

    • Added symmetric hash algorithm ShangMi 3 (SM3).
    • Added symmetric cipher algorithm ShangMi 4 (SM4) in ECB, CBC and CTR modes.
  • Updated Intel QuickAssist Technology (QAT) crypto driver.

    • Added support for SM3 hash algorithm.
    • Added support for SM4 encryption algorithm in ECB, CBC and CTR modes.
    • Added support for ECDH key exchange algorithm.
  • Updated Marvell cnxk crypto driver.

    • Added AES-CCM support in lookaside protocol (IPsec) for CN9K and CN10K.
    • Added AES & DES DOCSIS algorithm support in lookaside crypto for CN9K.
  • Updated aesni_mb crypto driver.

    • Added support for 8-byte and 16-byte tags for ZUC-EIA3-256.
    • Added support for in-place SGL, out-of-place SGL in SGL out, out-of-place LB in SGL out, and out-of-place SGL in LB out.
  • Updated ipsec_mb crypto driver.

    • Added SNOW-3G and ZUC support for ARM platform.
    • Added Intel IPsec MB v1.3 library support for x86 platform.
  • Added UADK crypto driver.

    Added a new crypto driver for the UADK library. See the UADK Crypto Poll Mode Driver guide for more details on this new driver.

  • Added bbdev operation for FFT processing.

    Added a new operation type in bbdev for FFT processing with new functions rte_bbdev_enqueue_fft_ops and rte_bbdev_dequeue_fft_ops, and related structures.

  • Added Intel ACC200 bbdev driver.

    Added a new acc200 bbdev driver for the Intel® ACC200 accelerator integrated on SPR-EE. See the Intel® ACC200 vRAN Dedicated Accelerator Poll Mode Driver guide for more details on this new driver.

  • Added eventdev adapter instance get API.

    • Added rte_event_eth_rx_adapter_instance_get to get Rx adapter instance ID for specified ethernet device ID and Rx queue index.
    • Added rte_event_eth_tx_adapter_instance_get to get Tx adapter instance ID for specified ethernet device ID and Tx queue index.
  • Added eventdev Tx adapter queue start/stop API.

    • Added rte_event_eth_tx_adapter_queue_start to start enqueueing packets to the Tx queue by Tx adapter.
    • Added rte_event_eth_tx_adapter_queue_stop to stop the Tx Adapter from enqueueing any packets to the Tx queue.
  • Added event crypto adapter vectorization support.

    Added support for aggregating crypto operations processed by event crypto adapter into a single event containing rte_event_vector whose event type is RTE_EVENT_TYPE_CRYPTODEV_VECTOR.

  • Added NitroSketch in membership library.

    Added a new data structure called sketch into the membership library, to profile the traffic efficiently. NitroSketch provides high-fidelity approximate measurements and appears as a promising alternative to traditional approaches such as packet sampling.

  • Added Intel uncore frequency control API to the power library.

    Added API to allow uncore frequency adjustment. This is done through manipulating related uncore frequency control sysfs entries to adjust the minimum and maximum uncore frequency values, which works on Linux with Intel hardware only.

  • Added security performance test application.

    Added new application to test rte_security session create/destroy performance. See the Security Performance Tool for more details.

  • Updated IPsec sample application.

    Added support for lookaside sessions in event mode. See the IPsec Security Gateway Sample Application for more details.

  • Updated FIPS validation sample application.

    Added support for asymmetric crypto algorithms. See the Federal Information Processing Standards (FIPS) CryptoDev Validation for more details.

  • Rewrote pmdinfo script.

    The dpdk-pmdinfo.py script was rewritten to produce valid JSON only. PCI-IDs parsing has been removed. To get a similar output to the (now removed) -r/--raw flag, the following command may be used:

    strings $dpdk_binary_or_driver | sed -n 's/^PMD_INFO_STRING= //p'
    

1.2. Removed Items

  • mem: Removed not implemented and deprecated rte_malloc_set_limit.
  • ethdev: removed RTE_FLOW_ITEM_TYPE_PF; use RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT instead.
  • ethdev: removed RTE_FLOW_ITEM_TYPE_VF; use RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT instead.
  • ethdev: removed RTE_FLOW_ITEM_TYPE_PHY_PORT; use RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT instead.
  • ethdev: removed RTE_FLOW_ACTION_TYPE_PHY_PORT; use RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT instead.
  • ethdev: removed OF_SET_MPLS_TTL, OF_DEC_MPLS_TTL, OF_SET_NW_TTL, OF_COPY_TTL_OUT and OF_COPY_TTL_IN which are not actually supported by any PMD. MODIFY_FIELD action should be used to do packet edits via flow API.
  • vhost: Removed deprecated rte_vhost_gpa_to_vva and rte_vhost_get_queue_num helpers.

1.3. API Changes

  • eal: RTE_FUNC_PTR_OR_* macros have been marked deprecated and will be removed in the future. Applications can use devtools/cocci/func_or_ret.cocci to update their code.
  • eal: Updated rte_eal_remote_launch so it returns -EPIPE in case of a read or write error on the pipe, instead of calling rte_panic.
  • eal: Updated return types for rte_{bsf,fls} inline functions to be consistently uint32_t.
  • mempool: Deprecated helper macro MEMPOOL_HEADER_SIZE() has been removed. The replacement macro RTE_MEMPOOL_HEADER_SIZE() is internal only.
  • mempool: Deprecated macro to register mempool driver MEMPOOL_REGISTER_OPS() has been removed. Use replacement macro RTE_MEMPOOL_REGISTER_OPS() instead.
  • mempool: Deprecated macros MEMPOOL_PG_NUM_DEFAULT and MEMPOOL_PG_SHIFT_MAX have been removed. These macros are not used and not required any more.
  • mbuf: Removed deprecated PKT_* flags. Use corresponding flags with RTE_MBUF_F_ prefix instead. Applications can use devtools/cocci/prefix_mbuf_offload_flags.cocci to replace all occurrences of old mbuf flags in C code.
  • bus: Changed the device numa node to -1 when NUMA information is unavailable. The dev->device.numa_node field is set by each bus driver for every device it manages to indicate on which NUMA node this device lies. When this information is unknown, the assigned value was not consistent across the bus drivers. This similarly impacts rte_eth_dev_socket_id().
  • bus: Registering a bus has been marked as an internal API. External users may still register their bus using the bus_driver.h driver header (see enable_driver_sdk meson option). The rte_bus object is now opaque and must be manipulated through added accessors.
  • drivers: Registering a driver on the auxiliary, ifpga, pci, vdev, vmbus buses has been marked as an internal API. External users may still register their driver using the associated driver headers (see enable_driver_sdk meson option). The rte_driver and rte_device objects are now opaque and must be manipulated through added accessors.
  • ethdev: Removed deprecated macros. Applications can use devtools/cocci/namespace_ethdev.cocci to update their code.
    • Removed deprecated ETH_LINK_SPEED_*, ETH_SPEED_NUM_* and ETH_LINK_* (duplex-related) defines. Use corresponding defines with RTE_ prefix instead.
    • Removed deprecated ETH_MQ_RX_* and ETH_MQ_TX_* defines. Use corresponding defines with RTE_ prefix instead.
    • Removed deprecated ETH_RSS_* defines for hash function and RETA size specification. Use corresponding defines with RTE_ prefix instead.
    • Removed deprecated DEV_RX_OFFLOAD_* and DEV_TX_OFFLOAD_ defines. Use corresponding defines with RTE_ETH_RX_OFFLOAD_ and RTE_ETH_TX_OFFLOAD_ prefix instead.
    • Removed deprecated ETH_DCB_*, ETH_VMDQ_, ETH_*_TCS, ETH_*_POOLS and ETH_MAX_VMDQ_POOL defines. Use corresponding defines with RTE_ prefix instead.
    • Removed deprecated RTE_TUNNEL_* defines. Use corresponding defines with RTE_ETH_TUNNEL_ prefix instead.
    • Removed deprecated RTE_FC_* defines. Use corresponding defines with RTE_ETH_FC_ prefix instead.
    • Removed deprecated ETH_VLAN_* and ETH_QINQ_ defines. Use corresponding defines with RTE_ prefix instead.
    • Removed deprecated ETH_NUM_RECEIVE_MAC_ADDR define. Use corresponding define with RTE_ prefix instead.
    • Removed deprecated PKT_{R,T}X_DYNF_METADATA defines. Use corresponding defines RTE_MBUF_DYNFLAG_{R,T}X_METADATA instead.
  • ethdev: Removed deprecated Flow Director configuration from device configuration (dev_conf.fdir_conf). Moved corresponding structures to internal API since some drivers still use it internally.
  • ethdev: Removed the Rx offload flag RTE_ETH_RX_OFFLOAD_HEADER_SPLIT and field split_hdr_size from the structure rte_eth_rxmode used to configure header split. Instead, user can still use RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT for per-queue packet split offload, which is configured by rte_eth_rxseg_split.
  • ethdev: The reserved field in the rte_eth_rxseg_split structure is replaced with proto_hdr to support protocol header based buffer split. User can choose length or protocol header to configure buffer split according to NIC’s capability.
  • ethdev: Changed the type of the parameter rate of the function rte_eth_set_queue_rate_limit() from uint16_t to uint32_t to support more than 64 Gbps. Changed the type of the parameter tx_rate of the functions rte_pmd_bnxt_set_vf_rate_limit() and rte_pmd_ixgbe_set_vf_rate_limit() in the same way for consistency.
  • ethdev: Promoted rte_eth_rx_metadata_negotiate() from experimental to stable.
  • ethdev: Promoted the following flow primitives from experimental to stable:
    • RTE_FLOW_ACTION_TYPE_PORT_REPRESENTOR
    • RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT
    • RTE_FLOW_ITEM_TYPE_PORT_REPRESENTOR
    • RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT
  • ethdev: Promoted rte_flow_pick_transfer_proxy() from experimental to stable.
  • ethdev: Banned the use of attributes ingress/egress in “transfer” flows, as the final step of the deprecation process that had been started in DPDK 21.11. See items PORT_REPRESENTOR, REPRESENTED_PORT.
  • vhost: Promoted rte_vhost_vring_stats_get(), rte_vhost_vring_stats_get_names() and rte_vhost_vring_stats_reset() from experimental to stable.
  • cryptodev: The structure rte_cryptodev_sym_session was made internal. The API rte_cryptodev_sym_session_init and rte_cryptodev_sym_session_clear were removed and user would only need to call rte_cryptodev_sym_session_create and rte_cryptodev_sym_session_free to create/destroy sessions. The API rte_cryptodev_sym_session_create was updated to take a single mempool with element size big enough to hold session data and session private data. All sample applications were updated to attach an opaque pointer for the session to the rte_crypto_op while enqueuing.
  • security: The structure rte_security_session was made internal and corresponding functions were updated to take/return an opaque session pointer. The API rte_security_session_create was updated to take only one mempool which has enough space to hold session and driver private data.
  • security: MACsec support has been added which resulted in updates to structures rte_security_macsec_xform, rte_security_macsec_stats and security capability structure rte_security_capability to accommodate MACsec capabilities.
  • security: The experimental API rte_security_get_userdata was being unused by most of the drivers and it was retrieving userdata from mbuf dynamic field. The API is now removed and the application can directly get the userdata from mbuf dynamic field.
  • eventdev: The function rte_event_crypto_adapter_queue_pair_add was updated to accept configuration of type rte_event_crypto_adapter_queue_conf instead of rte_event, similar to rte_event_eth_rx_adapter_queue_add signature. Event will be one of the configuration fields, together with additional vector parameters.
  • eventdev: The function pointer definition eventdev_stop_flush_t is renamed to rte_eventdev_stop_flush_t to avoid conflicts with application symbols.
  • eventdev: The data type of the ID parameter in the functions rte_event_dev_xstats_names_get, rte_event_dev_xstats_get, rte_event_dev_xstats_by_name_get and rte_event_dev_xstats_reset is changed to uint64_t from unsigned int and uint32_t.
  • metrics: Updated rte_metrics_init so it returns an error code instead of calling rte_exit.
  • telemetry: The allowed characters in names for dictionary values are now limited to alphanumeric characters and a small subset of additional printable characters. This will ensure that all dictionary parameter names can be output without escaping in JSON - or in any future output format used. Names for the telemetry commands are now similarly limited. The parameters for telemetry commands are unaffected by this change.
  • raw/ifgpa: The function rte_pmd_ifpga_get_pci_bus has been removed.

1.4. ABI Changes

  • eal: Updated EAL thread names from lcore-worker-<lcore_id> to rte-worker-<lcore_id> so that DPDK can accommodate lcores higher than 99.
  • mbuf: Replaced buf_iova field with next field and added a new field dynfield2 at its place in second cacheline if RTE_IOVA_AS_PA is 0.
  • ethdev: enum RTE_FLOW_ITEM was affected by deprecation procedure.
  • ethdev: enum RTE_FLOW_ACTION was affected by deprecation procedure.
  • bbdev: enum rte_bbdev_op_type was affected to remove RTE_BBDEV_OP_TYPE_COUNT and to allow for futureproof enum insertion a padded RTE_BBDEV_OP_TYPE_SIZE_MAX macro is added.
  • bbdev: Structure rte_bbdev_driver_info was updated to add new parameters for queue topology, device status using rte_bbdev_device_status.
  • bbdev: Structure rte_bbdev_queue_data was updated to add new parameter for enqueue status using rte_bbdev_enqueue_status.
  • eventdev: Added evtim_drop_count field to rte_event_timer_adapter_stats structure.
  • eventdev: Added weight and affinity fields to rte_event_queue_conf structure.
  • eventdev: The field *u64s in the structure rte_event_vector is replaced with u64s as the field is supposed to hold an array of uint64_t values.
  • eventdev: The structure rte_event_vector was updated to include a new bit field elem_offset:12. The bits are taken from the bitfield rsvd:15.

1.5. Tested Platforms

  • Intel® platforms with Intel® NICs combinations
    • CPU
      • Intel® Atom™ CPU C3758 @ 2.20GHz
      • Intel® Xeon® CPU D-1553N @ 2.30GHz
      • Intel® Xeon® CPU E5-2680 v2 @ 2.80GHz
      • Intel® Xeon® CPU E5-2699 v3 @ 2.30GHz
      • Intel® Xeon® CPU E5-2699 v4 @ 2.20GHz
      • Intel® Xeon® D-2796NT CPU @ 2.00GHz
      • Intel® Xeon® Gold 6139 CPU @ 2.30GHz
      • Intel® Xeon® Gold 6140M CPU @ 2.30GHz
      • Intel® Xeon® Gold 6252N CPU @ 2.30GHz
      • Intel® Xeon® Gold 6348 CPU @ 2.60GHz
      • Intel® Xeon® Platinum 8180M CPU @ 2.50GHz
      • Intel® Xeon® Platinum 8280M CPU @ 2.70GHz
      • Intel® Xeon® Platinum 8380 CPU @ 2.30GHz
    • OS:
      • Fedora 36
      • FreeBSD 13.1
      • Red Hat Enterprise Linux Server release 8.6
      • Red Hat Enterprise Linux Server release 9
      • CentOS 7.9
      • Ubuntu 20.04.5
      • Ubuntu 22.04.1
      • Ubuntu 22.10
      • SUSE Linux Enterprise Server 15 SP4
    • NICs:
      • Intel® Ethernet Controller E810-C for SFP (4x25G)
        • Firmware version: 4.10 0x800151d8 1.3310.0
        • Device id (pf/vf): 8086:1593 / 8086:1889
        • Driver version(out-tree): 1.10.6 (ice)
        • Driver version(in-tree): 5.15.0-46-generic / 4.18.0-372.9.1.rt7.166.el8.x86_64 (ice)
        • OS Default DDP: 1.3.30.0
        • COMMS DDP: 1.3.37.0
        • Wireless Edge DDP: 1.3.10.0
      • Intel® Ethernet Controller E810-C for QSFP (2x100G)
        • Firmware version: 4.10 0x8001518e 1.3310.0
        • Device id (pf/vf): 8086:1592 / 8086:1889
        • Driver version: 1.10.6 (ice)
        • OS Default DDP: 1.3.30.0
        • COMMS DDP: 1.3.37.0
        • Wireless Edge DDP: 1.3.10.0
      • Intel® Ethernet Controller E810-XXV for SFP (2x25G)
        • Firmware version: 4.10 0x80015188 1.3310.0
        • Device id (pf/vf): 8086:159b / 8086:1889
        • Driver version: 1.10.6 (ice)
        • OS Default DDP: 1.3.30.0
        • COMMS DDP: 1.3.37.0
      • Intel® 82599ES 10 Gigabit Ethernet Controller
        • Firmware version: 0x61bf0001
        • Device id (pf/vf): 8086:10fb / 8086:10ed
        • Driver version(out-tree): 5.16.5 (ixgbe)
        • Driver version(in-tree): 5.15.0-46-generic (ixgbe)
      • Intel® Ethernet Converged Network Adapter X710-DA4 (4x10G)
        • Firmware version: 9.00 0x8000cead 1.3179.0
        • Device id (pf/vf): 8086:1572 / 8086:154c
        • Driver version(out-tree): 2.20.12 (i40e)
        • Driver version(in-tree): 5.15.0-46-generic (i40e)
      • Intel® Corporation Ethernet Connection X722 for 10GbE SFP+ (2x10G)
        • Firmware version: 6.00 0x800039ec 1.3179.0
        • Device id (pf/vf): 8086:37d0 / 8086:37cd
        • Driver version(out-tree): 2.20.12 (i40e)
        • Driver version(in-tree): 5.15.0-46-generic (i40e)
      • Intel® Corporation Ethernet Connection X722 for 10GBASE-T
        • Firmware version: 6.00 0x800039aa 1.2935.0
        • Device id (pf/vf): 8086:37d2 / 8086:37cd
        • Driver version(out-tree): 2.20.12 (i40e)
        • Driver version(in-tree): 5.15.0-46-generic (i40e)
      • Intel® Ethernet Converged Network Adapter XXV710-DA2 (2x25G)
        • Firmware version: 9.00 0x8000ce90 1.3179.0
        • Device id (pf/vf): 8086:158b / 8086:154c
        • Driver version(out-tree): 2.20.12 (i40e)
        • Driver version(in-tree): 5.15.0-46-generic (i40e)
      • Intel® Ethernet Converged Network Adapter XL710-QDA2 (2X40G)
        • Firmware version(PF): 9.00 0x8000ce86 1.3179.0
        • Device id (pf/vf): 8086:1583 / 8086:154c
        • Driver version(out-tree): 2.20.12 (i40e)
        • Driver version(in-tree): 5.15.0-46-generic (i40e)
      • Intel® Ethernet Converged Network Adapter X710-T2L
        • Firmware version: 9.00 0x8000ce67 1.3179.0
        • Device id (pf): 8086:15ff
        • Driver version: 2.20.12 (i40e)
  • Intel® platforms with NVIDIA® NICs combinations
    • CPU:
      • Intel® Xeon® Gold 6154 CPU @ 3.00GHz
      • Intel® Xeon® CPU E5-2697A v4 @ 2.60GHz
      • Intel® Xeon® CPU E5-2697 v3 @ 2.60GHz
      • Intel® Xeon® CPU E5-2680 v2 @ 2.80GHz
      • Intel® Xeon® CPU E5-2670 0 @ 2.60GHz
      • Intel® Xeon® CPU E5-2650 v4 @ 2.20GHz
      • Intel® Xeon® CPU E5-2650 v3 @ 2.30GHz
      • Intel® Xeon® CPU E5-2640 @ 2.50GHz
      • Intel® Xeon® CPU E5-2650 0 @ 2.00GHz
      • Intel® Xeon® CPU E5-2620 v4 @ 2.10GHz
    • OS:
      • Red Hat Enterprise Linux release 8.6 (Ootpa)
      • Red Hat Enterprise Linux release 8.4 (Ootpa)
      • Red Hat Enterprise Linux release 8.2 (Ootpa)
      • Red Hat Enterprise Linux Server release 7.9 (Maipo)
      • Red Hat Enterprise Linux Server release 7.8 (Maipo)
      • Red Hat Enterprise Linux Server release 7.6 (Maipo)
      • Red Hat Enterprise Linux Server release 7.5 (Maipo)
      • Red Hat Enterprise Linux Server release 7.4 (Maipo)
      • Ubuntu 22.04
      • Ubuntu 20.04
      • Ubuntu 18.04
      • SUSE Enterprise Linux 15 SP2
    • OFED:
      • MLNX_OFED 5.8-1.0.1.1 and above
      • MLNX_OFED 5.7-1.0.2.0
    • upstream kernel:
      • Linux 6.1.0-rc3 and above
    • rdma-core:
      • rdma-core-43.0 and above
    • NICs:
      • NVIDIA® ConnectX®-3 Pro 40G MCX354A-FCC_Ax (2x40G)
        • Host interface: PCI Express 3.0 x8
        • Device ID: 15b3:1007
        • Firmware version: 2.42.5000
      • NVIDIA® ConnectX®-3 Pro 40G MCX354A-FCCT (2x40G)
        • Host interface: PCI Express 3.0 x8
        • Device ID: 15b3:1007
        • Firmware version: 2.42.5000
      • NVIDIA® ConnectX®-4 Lx 25G MCX4121A-ACAT (2x25G)
        • Host interface: PCI Express 3.0 x8
        • Device ID: 15b3:1015
        • Firmware version: 14.32.1010 and above
      • NVIDIA® ConnectX®-4 Lx 50G MCX4131A-GCAT (1x50G)
        • Host interface: PCI Express 3.0 x8
        • Device ID: 15b3:1015
        • Firmware version: 14.32.1010 and above
      • NVIDIA® ConnectX®-5 100G MCX516A-CCAT (2x100G)
        • Host interface: PCI Express 3.0 x16
        • Device ID: 15b3:1017
        • Firmware version: 16.35.1012 and above
      • NVIDIA® ConnectX®-5 100G MCX556A-ECAT (2x100G)
        • Host interface: PCI Express 3.0 x16
        • Device ID: 15b3:1017
        • Firmware version: 16.35.1012 and above
      • NVIDIA® ConnectX®-5 100G MCX556A-EDAT (2x100G)
        • Host interface: PCI Express 3.0 x16
        • Device ID: 15b3:1017
        • Firmware version: 16.35.1012 and above
      • NVIDIA® ConnectX®-5 Ex EN 100G MCX516A-CDAT (2x100G)
        • Host interface: PCI Express 4.0 x16
        • Device ID: 15b3:1019
        • Firmware version: 16.35.1012 and above
      • NVIDIA® ConnectX®-6 Dx EN 100G MCX623106AN-CDAT (2x100G)
        • Host interface: PCI Express 4.0 x16
        • Device ID: 15b3:101d
        • Firmware version: 22.35.1012 and above
      • NVIDIA® ConnectX®-6 Lx EN 25G MCX631102AN-ADAT (2x25G)
        • Host interface: PCI Express 4.0 x8
        • Device ID: 15b3:101f
        • Firmware version: 26.35.1012 and above
      • NVIDIA® ConnectX®-7 200G CX713106AE-HEA_QP1_Ax (2x200G)
        • Host interface: PCI Express 5.0 x16
        • Device ID: 15b3:1021
        • Firmware version: 28.35.1012 and above
  • NVIDIA® BlueField® SmartNIC
    • NVIDIA® BlueField®-2 SmartNIC MT41686 - MBF2H332A-AEEOT_A1 (2x25G)
      • Host interface: PCI Express 3.0 x16
      • Device ID: 15b3:a2d6
      • Firmware version: 24.35.1012 and above
    • Embedded software:
      • Ubuntu 20.04.3
      • MLNX_OFED 5.8-1.0.1.1 and above
      • DOCA 1.5 with BlueField 3.9.3
      • DPDK application running on ARM cores
  • IBM Power 9 platforms with NVIDIA® NICs combinations
    • CPU:
      • POWER9 2.2 (pvr 004e 1202)
    • OS:
      • Ubuntu 20.04
    • NICs:
      • NVIDIA® ConnectX®-5 100G MCX556A-ECAT (2x100G)
        • Host interface: PCI Express 4.0 x16
        • Device ID: 15b3:1017
        • Firmware version: 16.35.1012
      • NVIDIA® ConnectX®-6 Dx 100G MCX623106AN-CDAT (2x100G)
        • Host interface: PCI Express 4.0 x16
        • Device ID: 15b3:101d
        • Firmware version: 22.35.1012
    • OFED:
      • MLNX_OFED 5.8-1.0.1.1

1.6. 22.11.1 Release Notes

1.6.1. 22.11.1 Fixes

  • drivers: fix symbol exports when map is omitted

1.7. 22.11.2 Release Notes

1.7.1. 22.11.2 Fixes

  • acl: fix crash on PPC64 with GCC 11
  • app/bbdev: add allocation checks
  • app/bbdev: check statistics failure
  • app/bbdev: fix build with optional flag
  • app/bbdev: fix build with optional flag
  • app/compress-perf: fix remaining data for ops
  • app/compress-perf: fix some typos
  • app/compress-perf: fix testing single operation
  • app/crypto-perf: fix IPsec direction
  • app/crypto-perf: fix number of segments
  • app/crypto-perf: fix session freeing
  • app/crypto-perf: fix SPI zero
  • app/crypto-perf: fix test file memory leak
  • app/dumpcap: fix storing port identifier
  • app/flow-perf: fix division or module by zero
  • app/testpmd: cleanup cleanly from signal
  • app/testpmd: fix crash on cleanup
  • app/testpmd: fix encap/decap size calculation
  • app/testpmd: fix forwarding stats for Tx dropped
  • app/testpmd: fix interactive mode on Windows
  • app/testpmd: fix interactive mode with no ports
  • app/testpmd: fix link check condition on port start
  • app/testpmd: fix packet count in IEEE 1588 engine
  • app/testpmd: fix packet transmission in noisy VNF engine
  • app/testpmd: fix secondary process packet forwarding
  • app/testpmd: fix Tx preparation in checksum engine
  • baseband/acc: add explicit mbuf append for soft output
  • baseband/acc: fix acc100 iteration counter in TB
  • baseband/acc: fix acc100 queue mapping to 64 bits
  • baseband/acc: fix check after deref and dead code
  • baseband/acc: fix iteration counter in TB mode
  • baseband/acc: fix memory leak on acc100 close
  • baseband/acc: fix multiplexing acc100 operations
  • baseband/acc: prevent to dequeue more than requested
  • baseband/acc: protect from TB negative scenario
  • build: detect backtrace availability
  • build: fix dependencies lookup
  • build: fix toolchain definition
  • bus/fslmc: fix deadlock on MC send command timeout
  • bus/ifpga: fix devargs handling
  • cmdline: handle EOF as quit
  • cmdline: make rdline status not private
  • common/cnxk: add memory clobber to steor and ldeor
  • common/cnxk: fix aura ID handling
  • common/cnxk: fix auth key length
  • common/cnxk: fix channel mask for SDP interfaces
  • common/cnxk: fix dual VLAN parsing
  • common/cnxk: fix IPv6 extension header parsing
  • common/cnxk: fix IPv6 extension matching
  • common/cnxk: fix second pass flow rule layer type
  • common/cnxk: reduce channel count per LMAC
  • common/mlx5: fix offset of a field
  • common/mlx5: improve AES-XTS tweak capability check
  • common/mlx5: use just sufficient barrier for Arm
  • common/sfc_efx/base: add MAE mark reset action
  • compressdev: fix empty devargs parsing
  • compressdev: fix end of driver list
  • compress/mlx5: fix decompress xform validation
  • compress/mlx5: fix output Adler-32 checksum offset
  • compress/mlx5: fix queue setup for partial transformations
  • crypto/ccp: fix IOVA handling
  • crypto/ccp: fix PCI probing
  • crypto/ccp: remove some dead code for UIO
  • crypto/ccp: remove some printf
  • crypto/cnxk: fix digest for empty input data
  • cryptodev: fix empty devargs parsing
  • cryptodev: fix sym session mempool creation description
  • cryptodev: fix telemetry data truncation
  • crypto/ipsec_mb: fix ZUC-256 maximum tag length
  • crypto/ipsec_mb: relax multi-process requirement
  • crypto/ipsec_mb: remove unnecessary null check
  • crypto/openssl: fix freeing in RSA EVP
  • crypto/openssl: fix warning on copy length
  • crypto/qat: fix build
  • crypto/qat: fix build for generic x86 with GCC 12
  • crypto/qat: fix SM3 auth mode
  • crypto/qat: fix stream cipher direction
  • devtools: fix escaped space in grep pattern
  • devtools: fix name check with mbox files
  • devtools: move mailmap check after patch applied
  • dma/ioat: fix device stop if no copies done
  • dma/ioat: fix error reporting on restart
  • dma/ioat: fix indexes after restart
  • dma/skeleton: fix empty devargs parsing
  • doc: add gpudev to the Doxygen index
  • doc: add Linux capability to access physical addresses
  • doc: fix code blocks in cryptodev guide
  • doc: fix DCF instructions in ice guide
  • doc: fix dependency setup in l2fwd-cat example guide
  • doc: fix description of L2TPV2 flow item
  • doc: fix firmware list in bnxt guide
  • doc: fix LPM support in l3forward guide
  • doc: fix pipeline example path in user guide
  • doc: fix reference to event timer header
  • drivers/bus: fix leak for devices without driver
  • drivers: fix symbol exports when map is omitted
  • eal: cleanup alarm and hotplug before memory detach
  • eal/freebsd: fix lock in alarm callback
  • eal/linux: fix hugetlbfs sub-directories discovery
  • eal/unix: fix thread creation
  • eal: use same atomic intrinsics for GCC and clang
  • eal/windows: fix pedantic build
  • eal/windows: fix thread creation
  • eal/windows: mark memory config as complete
  • ethdev: fix build with LTO
  • ethdev: fix telemetry data truncation
  • ethdev: remove telemetry Rx mbuf alloc failed field
  • event/cnxk: fix burst timer arm
  • event/cnxk: fix SSO cleanup
  • event/cnxk: fix timer operations in secondary process
  • event/cnxk: wait for CPT flow control on WQE path
  • eventdev/crypto: fix enqueue count
  • eventdev/crypto: fix failed events
  • eventdev/crypto: fix function symbol export
  • eventdev/crypto: fix offset used while flushing events
  • eventdev/crypto: fix overflow in circular buffer
  • eventdev/eth_rx: fix getting adapter instance
  • eventdev/eth_tx: fix devices loop
  • eventdev: fix memory size for telemetry
  • eventdev/timer: fix overflow
  • examples/cmdline: fix build with GCC 12
  • examples/fips_validation: add extra space in JSON buffer
  • examples/fips_validation: fix AES-GCM tests
  • examples/fips_validation: fix AES-XTS sequence number
  • examples/fips_validation: fix integer parsing
  • examples/fips_validation: fix MCT output for SHA
  • examples/ipsec-secgw: fix auth IV length
  • examples/ipsec-secgw: fix offload variable init
  • examples/l2fwd-event: fix worker cleanup
  • examples/l3fwd: remove hash entry number
  • examples/qos_sched: fix config entries in wrong sections
  • examples/qos_sched: fix debug mode
  • examples/qos_sched: fix Tx port config when link down
  • fbarray: fix metadata dump
  • gpudev: export header file for external drivers
  • gpudev: fix deadlocks when registering callback
  • graph: fix node shrink
  • hash: fix GFNI implementation build with GCC 12
  • kni: fix build on RHEL 9.1
  • kni: fix possible starvation when mbufs are exhausted
  • kvargs: add API documentation for process callback
  • mem: fix heap ID in telemetry
  • mem: fix hugepage info mapping
  • mem: fix telemetry data truncation
  • mempool: fix telemetry data truncation
  • net/bnxt: fix link state change interrupt config
  • net/bnxt: fix RSS hash in mbuf
  • net/bnxt: fix Rx queue stats after queue stop and start
  • net/bnxt: fix Tx queue stats after queue stop and start
  • net/cnxk: fix deadlock in security session creation
  • net/cnxk: fix LBK BPID usage
  • net/cnxk: fix packet type for IPv6 packets post decryption
  • net/cnxk: validate RED threshold config
  • net/e1000: fix saving of stripped VLAN TCI
  • net/ena: fix deadlock in RSS RETA update
  • net/gve: fix offloading capability
  • net/hns3: add debug info for Rx/Tx dummy function
  • net/hns3: add verification of RSS types
  • net/hns3: allow adding queue buffer size hash rule
  • net/hns3: declare flow rule keeping capability
  • net/hns3: extract common functions to set Rx/Tx
  • net/hns3: extract common function to query device
  • net/hns3: fix burst mode query with dummy function
  • net/hns3: fix clearing RSS configuration
  • net/hns3: fix config struct used for conversion
  • net/hns3: fix duplicate RSS rule check
  • net/hns3: fix empty devargs parsing
  • net/hns3: fix inaccurate RTC time to read
  • net/hns3: fix log about indirection table size
  • net/hns3: fix possible truncation of hash key when config
  • net/hns3: fix possible truncation of redirection table
  • net/hns3: fix RSS key size compatibility
  • net/hns3: fix warning on flush or destroy rule
  • net/hns3: make getting Tx function static
  • net/hns3: refactor set RSS hash algorithm and key interface
  • net/hns3: reimplement hash flow function
  • net/hns3: remove debug condition for Tx prepare
  • net/hns3: remove useless code when destroy valid RSS rule
  • net/hns3: save hash algo to RSS filter list node
  • net/hns3: separate flow RSS config from RSS conf
  • net/hns3: separate setting and clearing RSS rule
  • net/hns3: separate setting hash algorithm
  • net/hns3: separate setting hash key
  • net/hns3: separate setting redirection table
  • net/hns3: separate setting RSS types
  • net/hns3: separate Tx prepare from getting Tx function
  • net/hns3: use hardware config to report hash key
  • net/hns3: use hardware config to report hash types
  • net/hns3: use hardware config to report redirection table
  • net/hns3: use new RSS rule to configure hardware
  • net/hns3: use RSS filter list to check duplicated rule
  • net/i40e: fix AVX512 fast-free path
  • net/i40e: fix MAC loopback on X722
  • net/i40e: fix maximum frame size configuration
  • net/i40e: fix validation of flow transfer attribute
  • net/i40e: reduce interrupt interval in multi-driver mode
  • net/i40e: revert link status check on device start
  • net/iavf: add lock for VF commands
  • net/iavf: fix building data desc
  • net/iavf: fix device stop during reset
  • net/iavf: fix outer UDP checksum offload
  • net/iavf: fix VLAN offload with AVX2
  • net/iavf: protect insertion in flow list
  • net/ice: fix Rx timestamp
  • net/ice: fix validation of flow transfer attribute
  • net/idpf: fix driver infos
  • net/idpf: fix mbuf leak in split Tx
  • net/idpf: reset queue flag when queue is stopped
  • net/ipn3ke: fix representor name
  • net/ipn3ke: fix thread exit
  • net/ixgbe: enable IPv6 mask in flow rules
  • net/ixgbe: fix firmware version consistency
  • net/ixgbe: fix IPv6 mask in flow director
  • net/mana: enable driver by default
  • net/mana: fix stats counters
  • net/mlx5: check compressed CQE opcode in vectorized Rx
  • net/mlx5: fix available tag registers calculation for HWS
  • net/mlx5: fix build with GCC 12 and ASan
  • net/mlx5: fix CQE dump for Tx
  • net/mlx5: fix crash on action template failure
  • net/mlx5: fix egress group translation in HWS
  • net/mlx5: fix error CQE dumping for vectorized Rx
  • net/mlx5: fix flow sample with ConnectX-5
  • net/mlx5: fix GENEVE resource overwrite
  • net/mlx5: fix hairpin Tx queue reference count
  • net/mlx5: fix isolated mode if no representor matching
  • net/mlx5: fix read device clock in real time mode
  • net/mlx5: fix sysfs port name translation
  • net/mlx5: fix wait descriptor opcode for ConnectX-7
  • net/mlx5: fix warning for Tx scheduling option
  • net/mlx5: fix Windows build with MinGW GCC 12
  • net/mlx5/hws: fix error code of send queue action
  • net/mlx5/hws: fix IPv4 fragment matching
  • net/mlx5/hws: fix memory leak on general pool DB init
  • net/mlx5/hws: fix pattern creation
  • net/mlx5: ignore non-critical syndromes for Rx queue
  • net/nfp: fix 48-bit DMA support for NFDk
  • net/nfp: fix firmware name derived from PCI name
  • net/nfp: fix getting RSS configuration
  • net/nfp: fix max DMA length
  • net/nfp: fix MTU configuration order
  • net/nfp: fix offload of multiple output actions
  • net/nfp: fix set DSCP flow action
  • net/nfp: fix set IPv4 flow action
  • net/nfp: fix set IPv6 flow action
  • net/nfp: fix set MAC flow action
  • net/nfp: fix set TP flow action
  • net/nfp: fix set TTL flow action
  • net/nfp: fix teardown of flows sharing a mask ID
  • net/nfp: fix Tx packet drop for large data length
  • net/nfp: fix VNI of VXLAN encap action
  • net/nfp: restrict flow flush to the port
  • net/nfp: store counter reset before zeroing flow query
  • net/ngbe: add spinlock protection on YT PHY
  • net/ngbe: fix packet type to parse from offload flags
  • net/sfc: enforce fate action in transfer flow rules
  • net/sfc: export pick transfer proxy callback to representors
  • net/sfc: fix MAC address entry leak in transfer flow parsing
  • net/sfc: fix resetting mark in tunnel offload switch rules
  • net/sfc: invalidate switch port entry on representor unplug
  • net/txgbe: fix default signal quality value for KX/KX4
  • net/txgbe: fix interrupt loss
  • net/txgbe: fix packet type to parse from offload flags
  • net/txgbe: fix Rx buffer size in config register
  • net/vhost: add missing newline in logs
  • net/vhost: fix leak in interrupt handle setup
  • net/vhost: fix Rx interrupt
  • net/virtio: deduce IP length for TSO checksum
  • net/virtio: fix empty devargs parsing
  • net/virtio: remove address width limit for modern devices
  • net/virtio-user: fix device starting failure handling
  • pdump: fix build with GCC 12
  • raw/ifpga/base: fix init with multi-process
  • raw/skeleton: fix empty devargs parsing
  • raw/skeleton: fix selftest
  • regex/mlx5: fix doorbell record
  • regex/mlx5: utilize all available queue pairs
  • reorder: fix sequence number mbuf field register
  • reorder: invalidate buffer from ready queue in drain
  • ring: silence GCC 12 warnings
  • sched: fix alignment of structs in subport
  • table: fix action selector group size log2 setting
  • telemetry: fix repeat display when callback don’t init dict
  • telemetry: move include after guard
  • test/bbdev: extend HARQ tolerance
  • test/bbdev: fix crash for non supported HARQ length
  • test/bbdev: remove check for invalid opaque data
  • test/crypto: add missing MAC-I to PDCP vectors
  • test/crypto: fix capability check for ZUC cipher-auth
  • test/crypto: fix skip condition for CPU crypto SGL
  • test/crypto: fix statistics error messages
  • test/crypto: fix typo in AES test
  • test/crypto: fix ZUC digest length in comparison
  • test: fix segment length in packet generator
  • test/mbuf: fix mbuf reset test
  • test/mbuf: fix test with mbuf debug enabled
  • test/reorder: fix double free of drained buffers
  • vdpa/ifc: fix argument compatibility check
  • vdpa/ifc: fix reconnection in SW-assisted live migration
  • version: 22.11.2-rc1
  • vhost: decrease log level for unimplemented requests
  • vhost: fix net header settings in datapath
  • vhost: fix OOB access for invalid vhost ID
  • vhost: fix possible FD leaks
  • vhost: fix possible FD leaks on truncation
  • vhost: fix slot index in async split virtqueue Tx

1.7.2. 22.11.2 Validation

  • Intel(R) Testing

    • Basic Intel(R) NIC testing

      • Build & CFLAG compile: cover the build test combination with latest GCC/Clang version and the popular OS revision such as Ubuntu20.04, Ubuntu22.04, Fedora35, Fedora37, RHEL8.6, RHEL8.4, FreeBSD13.1, SUSE15, CentOS7.9, openEuler22.03-SP1 etc.
      • PF(i40e, ixgbe): test scenarios including RTE_FLOW/TSO/Jumboframe/checksum offload/VLAN/VXLAN, etc.
      • VF(i40e, ixgbe): test scenarios including VF-RTE_FLOW/TSO/Jumboframe/checksum offload/VLAN/VXLAN, etc.
      • PF/VF(ice): test scenarios including Switch features/Package Management/Flow Director/Advanced Tx/Advanced RSS/ACL/DCF/Flexible Descriptor, etc.
      • Intel NIC single core/NIC performance: test scenarios including PF/VF single core performance test, etc.
      • IPsec: test scenarios including ipsec/ipsec-gw/ipsec library basic test - QAT&SW/FIB library, etc.
    • Basic cryptodev and virtio testing

      • Virtio: both function and performance test are covered. Such as PVP/Virtio_loopback/virtio-user loopback/virtio-net VM2VM perf testing/VMAWARE ESXI 7.0u3, etc.

      • Cryptodev:

        • Function test: test scenarios including Cryptodev API testing/CompressDev ISA-L/QAT/ZLIB PMD Testing/FIPS, etc.
        • Performance test: test scenarios including Thoughput Performance/Cryptodev Latency, etc.
  • Nvidia(R) Testing

    • Basic functionality

      • Tx/Rx, xstats, timestamps, link status, RTE flow, RSS, VLAN, checksum and TSO, ptype…
      • link_status interrupt, l3fwd-power, multi-process.
      • LRO, regEx, buffer split, Tx scheduling.
    • Build tests

      • Ubuntu 20.04.6 with MLNX_OFED_LINUX-5.9-0.5.6.0.
      • Ubuntu 20.04.6 with rdma-core master (d2dbc88).
      • Ubuntu 20.04.6 with rdma-core v28.0.
      • Ubuntu 18.04.6 with rdma-core v17.1.
      • Ubuntu 18.04.6 with rdma-core master (d2dbc88) (i386).
      • Fedora 38 with rdma-core v44.0.
      • Fedora 39 (Rawhide) with rdma-core v44.0.
      • CentOS 7 7.9.2009 with rdma-core master (d2dbc88).
      • CentOS 7 7.9.2009 with MLNX_OFED_LINUX-5.9-0.5.6.0.
      • CentOS 8 8.4.2105 with rdma-core master (d2dbc88).
      • OpenSUSE Leap 15.4 with rdma-core v38.1.
      • Windows Server 2019 with Clang 11.0.0.
    • Test platform

      • NIC: ConnectX-5 / OS: Ubuntu 20.04 / Kernel: 6.3.0 / Driver: rdma-core v45.0 / Firmware: 16.35.2000
      • NIC: ConnectX-6 Dx / OS: Ubuntu 20.04 / Driver: MLNX_OFED_LINUX-5.9-0.5.6.0 / Firmware: 22.36.1010
      • NIC: ConnectX-7 / OS: Ubuntu 20.04 / Driver: MLNX_OFED_LINUX-5.9-0.5.6.0 / Firmware: 22.36.1010
      • DPU: BlueField-2 / DOCA SW version: 1.5.1 / Firmware: 24.35.2000

1.7.3. 22.11.2 Known Issues

1.8. 22.11.3 Release Notes

1.8.1. 22.11.3 Fixes

  • app/crypto-perf: fix socket ID default value
  • app/testpmd: fix checksum engine with GTP on 32-bit
  • app/testpmd: fix flow rule number parsing
  • app/testpmd: fix GTP L2 length in checksum engine
  • app/testpmd: fix meter mark handle update
  • app/testpmd: fix primary process not polling all queues
  • app/testpmd: revert primary process polling all queues fix
  • baseband/fpga_5gnr_fec: fix possible division by zero
  • baseband/fpga_5gnr_fec: fix starting unconfigured queue
  • build: fix warning when getting NUMA nodes
  • ci: fix build for Arm cross compilation in GHA
  • ci: fix libabigail cache in GHA
  • common/cnxk: fix CPT backpressure disable on LBK
  • common/cnxk: fix inline device VF identification
  • common/cnxk: fix IPsec IPv6 tunnel address byte swap
  • common/cnxk: fix receive queue with multiple mask
  • common/cnxk: fix setting channel mask for SDP interfaces
  • common/cnxk: fix uninitialized pointer read
  • common/iavf: fix MAC type for 710 NIC
  • common/idpf/base: fix control queue send and receive
  • common/idpf/base: fix ITR register definitions for AVF
  • common/idpf/base: fix memory leaks on control queue
  • common/idpf/base: fix parameters when send msg to cp
  • common/idpf: fix memory leak on AVX512 Tx queue close
  • common/idpf: remove device stop flag
  • common/mlx5: adjust fork call with new kernel API
  • common/mlx5: fix obtaining IB device in LAG mode
  • common/qat: detach crypto from compress build
  • common/qat: fix command parameter corruption
  • common/sfc_efx/base: fix Rx queue without RSS hash prefix
  • crypto/cnxk: fix IPsec CCM capabilities
  • cryptodev: clarify error codes for symmetric session
  • cryptodev: fix comments of modular operation parameters
  • cryptodev: fix device socket ID type
  • crypto/ipsec_mb: fix enqueue counter for SNOW3G
  • crypto/ipsec_mb: optimize allocation in session
  • crypto/openssl: fix memory free
  • crypto/openssl: fix memory leak in auth processing
  • crypto/openssl: skip workaround at compilation time
  • crypto/qat: fix null algorithm digest placement
  • crypto/qat: fix stack buffer overflow in SGL loop
  • crypto/qat: fix sym device prototype
  • crypto/scheduler: fix last element for valid args
  • devtools: fix bashism in mailmap check
  • devtools: fix mailmap check for parentheses
  • dma/dpaa2: set VFA bit for route-by-port with VF
  • doc: add flow template API requirements for mlx5
  • doc: fix auth algos in cryptoperf app
  • doc: fix description of runtime directories
  • doc: fix event timer adapter guide
  • doc: fix format in flow API guide
  • doc: fix kernel patch link in hns3 guide
  • doc: fix link to flow capabilities from bnxt guide
  • doc: fix number of leading spaces in hns3 guide
  • doc: fix syntax in hns3 guide
  • doc: fix typo in cnxk platform guide
  • doc: fix typo in graph guide
  • doc: fix typos and wording in flow API guide
  • doc: improve wording of cuda guide
  • doc: remove warning with Doxygen 1.9.7
  • doc: update BIOS settings and supported HW for NTB
  • eal: avoid calling cleanup twice
  • eal/linux: fix legacy mem init with many segments
  • eal/linux: fix secondary process crash for mp hotplug requests
  • eal/x86: improve multiple of 64 bytes memcpy performance
  • ethdev: check that at least one FEC mode is specified
  • ethdev: fix calloc arguments
  • ethdev: fix indirect action conversion
  • ethdev: fix MAC address occupies two entries
  • ethdev: fix potential leak in PCI probing helper
  • ethdev: update documentation for API to get FEC
  • ethdev: update documentation for API to set FEC
  • event/cnxk: fix mempool cookies check
  • event/cnxk: fix nanoseconds to ticks conversion
  • event/cnxk: fix setting attributes in empty get work
  • event/cnxk: fix Tx adapter data pointer
  • eventdev/timer: fix buffer flush
  • eventdev/timer: fix timeout event wait behavior
  • event/dsw: free rings on close
  • examples/fips_validation: fix digest length in AES-GCM
  • examples/fips_validation: fix external build
  • examples/ip_pipeline: fix build with GCC 13
  • examples/ipsec-secgw: fix socket ID default value
  • examples/ipsec-secgw: fix TAP default MAC address
  • examples/ipsec-secgw: fix zero address in ethernet header
  • examples/l2fwd-cat: fix external build
  • examples/l3fwd: fix duplicate expression for default nexthop
  • examples/ntb: fix build with GCC 13
  • fib: fix adding default route
  • hash: fix reading unaligned bits in Toeplitz hash
  • ipc: fix file descriptor leakage with unhandled messages
  • ipsec: fix NAT-T header length
  • kernel/freebsd: fix function parameter list
  • kni: fix build with Linux 6.3
  • kni: fix build with Linux 6.5
  • mbuf: fix Doxygen comment of distributor metadata
  • member: fix PRNG seed reset in NitroSketch mode
  • mem: fix memsegs exhausted message
  • mempool/cnxk: avoid hang when counting batch allocs
  • net/bonding: fix destroy dedicated queues flow
  • net/bonding: fix startup when NUMA is not supported
  • net/cnxk: fix cookies check with security offload
  • net/cnxk: fix flow queue index validation
  • net/cnxk: flush SQ before configuring MTU
  • net/dpaa2: fix checksum good flags
  • net/e1000: fix queue number initialization
  • net/e1000: fix Rx and Tx queue status
  • net: fix return type of IPv4 L4 packet checksum
  • net/hns3: delete duplicate macro definition
  • net/hns3: extract PTP to its own header file
  • net/hns3: fix build warning
  • net/hns3: fix device start return value
  • net/hns3: fix FEC mode check
  • net/hns3: fix FEC mode for 200G ports
  • net/hns3: fix IMP reset trigger
  • net/hns3: fix inaccurate log
  • net/hns3: fix index to look up table in NEON Rx
  • net/hns3: fix mbuf leakage when RxQ started after reset
  • net/hns3: fix mbuf leakage when RxQ started during reset
  • net/hns3: fix missing FEC capability
  • net/hns3: fix never set MAC flow control
  • net/hns3: fix non-zero weight for disabled TC
  • net/hns3: fix redundant line break in log
  • net/hns3: fix RTC time after reset
  • net/hns3: fix RTC time on initialization
  • net/hns3: fix Rx multiple firmware reset interrupts
  • net/hns3: fix uninitialized variable
  • net/hns3: fix variable type mismatch
  • net/hns3: uninitialize PTP
  • net/i40e: fix comments
  • net/i40e: fix Rx data buffer size
  • net/i40e: fix tunnel packet Tx descriptor
  • net/iavf: fix abnormal disable HW interrupt
  • net/iavf: fix protocol agnostic offloading with big packets
  • net/iavf: fix Rx data buffer size
  • net/iavf: fix stop ordering
  • net/iavf: fix tunnel TSO path selection
  • net/iavf: fix virtchnl command called in interrupt
  • net/iavf: fix VLAN insertion in vector path
  • net/iavf: fix VLAN offload with AVX512
  • net/iavf: release large VF when closing device
  • net/ice: adjust timestamp mbuf register
  • net/ice/base: fix incorrect defines for DCBx
  • net/ice/base: remove unreachable code
  • net/ice: fix 32-bit build
  • net/ice: fix DCF control thread crash
  • net/ice: fix DCF RSS initialization
  • net/ice: fix MAC type of E822 and E823
  • net/ice: fix outer UDP checksum offload
  • net/ice: fix protocol agnostic offloading with big packets
  • net/ice: fix RSS hash key generation
  • net/ice: fix Rx data buffer size
  • net/ice: fix statistics
  • net/ice: fix timestamp enabling
  • net/ice: fix tunnel packet Tx descriptor
  • net/ice: fix VLAN mode parser
  • net/ice: initialize parser for double VLAN
  • net/idpf: fix Rx data buffer size
  • net/igc: fix Rx and Tx queue status
  • net/ixgbe: add proper memory barriers in Rx
  • net/ixgbe: fix Rx and Tx queue status
  • net/mana: avoid unnecessary assignments in data path
  • net/mana: fix counter overflow for posted WQE
  • net/mana: fix Tx queue statistics
  • net/mana: fix WQE count for ringing RQ doorbell
  • net/mana: optimize completion queue by batch processing
  • net/mana: return probing failure if no device found
  • net/mana: use datapath logging
  • net/mlx5: enhance error log for tunnel offloading
  • net/mlx5: fix device removal event handling
  • net/mlx5: fix drop action attribute validation
  • net/mlx5: fix drop action memory leak
  • net/mlx5: fix duplicated tag index matching in SWS
  • net/mlx5: fix error in VLAN actions creation
  • net/mlx5: fix error set for age pool initialization
  • net/mlx5: fix error set in control tables create
  • net/mlx5: fix error set in Tx representor tagging
  • net/mlx5: fix flow dump for modify field
  • net/mlx5: fix flow workspace destruction
  • net/mlx5: fix handle validation for meter mark
  • net/mlx5: fix LRO TCP checksum
  • net/mlx5: fix matcher layout size calculation
  • net/mlx5: fix MPRQ stride size for headroom
  • net/mlx5: fix profile check of meter mark
  • net/mlx5: fix query for NIC flow capability
  • net/mlx5: fix return value of vport action
  • net/mlx5: fix risk in NEON Rx descriptor read
  • net/mlx5: fix RSS expansion inner buffer overflow
  • net/mlx5: fix validation for conntrack indirect action
  • net/mlx5: fix VXLAN matching with zero value
  • net/mlx5: forbid duplicated tag index in pattern template
  • net/mlx5: forbid MPRQ restart
  • net/mlx5: reduce counter pool name length
  • net/netvsc: fix sizeof calculation
  • net/nfp: fix address always related with PF ID 0
  • net/nfp: fix control mempool creation
  • net/nfp: fix disabling promiscuous mode
  • net/nfp: fix endian conversion for tunnel decap action
  • net/nfp: fix flow hash table creation
  • net/nfp: fix IPv6 address for set flow action
  • net/nfp: fix IPv6 flow item
  • net/nfp: fix offloading flows
  • net/nfp: fix representor creation
  • net/nfp: fix representor name too long
  • net/nfp: fix TOS of IPv6 GENEVE encap flow action
  • net/nfp: fix TOS of IPv6 NVGRE encap flow action
  • net/nfp: fix TOS of IPv6 VXLAN encap flow action
  • net/nfp: fix TP flow action for UDP
  • net/nfp: fix Tx descriptor free logic of NFD3
  • net/nfp: fix unneeded endian conversion
  • net/nfp: fix VLAN push flow action
  • net/nfp: fix VNI of IPv4 NVGRE encap action
  • net/nfp: fix VNI of IPv6 NVGRE encap action
  • net/nfp: fix VNI of VXLAN encap action
  • net/ngbe: adapt to MNG veto bit setting
  • net/ngbe: fix extended statistics
  • net/ngbe: fix link status in no LSC mode
  • net/ngbe: fix RSS offload capability
  • net/ngbe: remove redundant codes
  • net/qede: fix RSS indirection table initialization
  • net/sfc: invalidate dangling MAE flow action FW resource IDs
  • net/sfc: stop misuse of Rx ingress m-port metadata on EF100
  • net/tap: set locally administered bit for fixed MAC address
  • net/txgbe: adapt to MNG veto bit setting
  • net/txgbe/base: fix Tx with fiber hotplug
  • net/txgbe: fix blocking system events
  • net/txgbe: fix extended statistics
  • net/txgbe: fix interrupt enable mask
  • net/txgbe: fix to set autoneg for 1G speed
  • net/txgbe: fix use-after-free on remove
  • net/virtio: fix initialization to return negative errno
  • net/virtio: propagate interrupt configuration error values
  • net/virtio-user: fix leak when initialisation fails
  • net/vmxnet3: fix drop of empty segments in Tx
  • net/vmxnet3: fix return code in initializing
  • pci: fix comment referencing renamed function
  • pipeline: fix double free for table stats
  • raw/ntb: avoid disabling interrupt twice
  • Revert “net/iavf: fix tunnel TSO path selection”
  • ring: fix dequeue parameter name
  • ring: fix use after free
  • telemetry: fix autotest on Alpine
  • test: add graph tests
  • test/bonding: fix include of standard header
  • test/crypto: fix IPsec AES CCM vector
  • test/crypto: fix PDCP-SDAP test vectors
  • test/crypto: fix return value for SNOW3G
  • test/crypto: fix session creation check
  • test/malloc: fix missing free
  • test/malloc: fix statistics checks
  • test/mbuf: fix crash in a forked process
  • test/security: fix event inline IPsec reassembly tests
  • version: 22.11.3-rc1
  • vfio: fix include with musl runtime
  • vhost: fix invalid call FD handling
  • vhost: fix notification stats for packed ring

1.8.2. 22.11.3 Validation

  • Intel(R) Testing

    • Basic Intel(R) NIC testing

      • Build & CFLAG compile: cover the build test combination with latest GCC/Clang version and the popular OS revision such as Ubuntu20.04, Ubuntu22.04, Fedora38, RHEL8.7, RHEL9.2, FreeBSD13.1, SUSE15, CentOS7.9, openEuler22.03-SP1,OpenAnolis8.8 etc.
      • PF(i40e, ixgbe): test scenarios including RTE_FLOW/TSO/Jumboframe/checksum offload/VLAN/VXLAN, etc.
      • VF(i40e, ixgbe): test scenarios including VF-RTE_FLOW/TSO/Jumboframe/checksum offload/VLAN/VXLAN, etc.
      • PF/VF(ice): test scenarios including Switch features/Package Management/Flow Director/Advanced Tx/Advanced RSS/ACL/DCF/Flexible Descriptor, etc.
      • Intel NIC single core/NIC performance: test scenarios including PF/VF single core performance test, etc.
      • IPsec: test scenarios including ipsec/ipsec-gw/ipsec library basic test - QAT&SW/FIB library, etc.
    • Basic cryptodev and virtio testing

      • Virtio: both function and performance test are covered. Such as PVP/Virtio_loopback/virtio-user loopback/virtio-net VM2VM perf testing/VMAWARE ESXI 8.0, etc.

      • Cryptodev:

        • Function test: test scenarios including Cryptodev API testing/CompressDev ISA-L/QAT/ZLIB PMD Testing/FIPS, etc.
        • Performance test: test scenarios including Thoughput Performance/Cryptodev Latency, etc.
  • Nvidia(R) Testing

    • Basic functionality

      • Tx/Rx, xstats, timestamps, link status, RTE flow, RSS, VLAN, checksum and TSO, ptype…
      • link_status interrupt, l3fwd-power, multi-process.
      • LRO, regEx, buffer split, Tx scheduling.
    • Build tests

      • Ubuntu 20.04.6 with MLNX_OFED_LINUX-23.04-1.1.3.0.
      • Ubuntu 20.04.6 with rdma-core master (4cce53f).
      • Ubuntu 20.04.6 with rdma-core v28.0.
      • Ubuntu 18.04.6 with rdma-core master (4cce53f) (i386).
      • Fedora 38 with rdma-core v44.0.
      • Fedora 39 (Rawhide) with rdma-core v46.0.
      • OpenSUSE Leap 15.5 with rdma-core v42.0.
      • Windows Server 2019 with Clang 11.0.0.
    • Test platform

      • NIC: ConnectX-6 Dx / OS: Ubuntu 20.04 / Driver: MLNX_OFED_LINUX-23.07-0.5.0.0 / Firmware: 22.38.1002
      • NIC: ConnectX-7 / OS: Ubuntu 20.04 / Driver: MLNX_OFED_LINUX-23.07-0.5.0.0 / Firmware: 28.38.1002
      • DPU: BlueField-2 / DOCA SW version: 2.2.0 / Firmware: 24.38.1002
  • Redhat Testing

    • Test scenarios

      • Guest with device assignment(PF) throughput testing(1G hugepage size)
      • Guest with device assignment(PF) throughput testing(2M hugepage size)
      • Guest with device assignment(VF) throughput testing
      • PVP (host dpdk testpmd as vswitch) 1Q: throughput testing
      • PVP vhost-user 2Q throughput testing
      • PVP vhost-user 1Q - cross numa node throughput testing
      • Guest with vhost-user 2 queues throughput testing
      • vhost-user reconnect with dpdk-client, qemu-server qemu reconnect
      • vhost-user reconnect with dpdk-client, qemu-server ovs reconnect
      • PVP reconnect with dpdk-client, qemu-server
      • PVP 1Q live migration testing
      • PVP 1Q cross numa node live migration testing
      • Guest with ovs+dpdk+vhost-user 1Q live migration testing
      • Guest with ovs+dpdk+vhost-user 1Q live migration testing (2M)
      • Guest with ovs+dpdk+vhost-user 2Q live migration testing
      • Guest with ovs+dpdk+vhost-user 4Q live migration testing
      • Host PF + DPDK testing
      • Host VF + DPDK testing
    • Version Information:

      • RHEL9
      • qemu-kvm-6.2.0 + qemu-kvm-7.2.0
      • kernel 5.14
      • X540-AT2 NIC(ixgbe, 10G)

1.8.3. 22.11.3 Known Issues

  • Intel(R) Testing

    • Cryptodev: Performance drop for 1c1t scenario

1.9. 22.11.4 Release Notes

1.9.1. 22.11.4 Fixes

  • app/bbdev: fix link with NXP LA12XX
  • app/dumpcap: allow multiple invocations
  • app/dumpcap: fix mbuf pool ring type
  • app/pipeline: add sigint handler
  • app/procinfo: adjust format of RSS info
  • app/procinfo: fix RSS info
  • app/procinfo: remove unnecessary rte_malloc
  • app/test: disable graph auto test for windows
  • app/test: fix reference to master in bonding test
  • app/testpmd: add explicit check for tunnel TSO
  • app/testpmd: fix early exit from signal
  • app/testpmd: fix help string
  • app/testpmd: fix primary process not polling all queues
  • app/testpmd: fix tunnel TSO capability check
  • app/testpmd: fix tunnel TSO configuration
  • app/testpmd: remove useless check in TSO command
  • baseband/acc: fix ACC100 HARQ input alignment
  • baseband/acc: fix TB mode on VRB1
  • build: add libarchive to optional external dependencies
  • bus/dpaa: fix build with asserts for GCC 13
  • bus/ifpga: fix driver header dependency
  • bus/pci: add PASID control
  • bus/pci: fix device ID log
  • ci: fix race on container image name
  • common/cnxk: fix aura disable handling
  • common/cnxk: fix default flow action setting
  • common/cnxk: fix different size bit operations
  • common/cnxk: fix DPI memzone name
  • common/cnxk: fix incorrect aura ID
  • common/cnxk: fix pool buffer size in opaque mode
  • common/cnxk: fix RSS key configuration
  • common/cnxk: fix SDP channel mask
  • common/cnxk: fix xstats for different packet sizes
  • common/cnxk: remove dead Meson code
  • common/cnxk: replace direct API usage in REE
  • common/mlx5: fix controller index parsing
  • common/mlx5: replace use of PMD log type
  • config/arm: fix aarch32 build with GCC 13
  • config: fix RISC-V native build
  • crypto/cnxk: fix IPsec CCM and GCM capabilities
  • cryptodev: add missing doc for security context
  • crypto/dpaa2_sec: fix debug prints
  • crypto/dpaa_sec: fix debug prints
  • crypto/ipsec_mb: add dependency check for cross build
  • crypto/nitrox: fix panic with high number of segments
  • crypto/openssl: fix memory leaks in asym session
  • crypto/qat: fix raw API null algorithm digest
  • dma/cnxk: fix chunk buffer failure return code
  • dma/cnxk: fix device reconfigure
  • dma/cnxk: fix device state
  • doc: fix hns3 build option about max queue number
  • doc: fix RSS flow description in hns3 guide
  • doc: fix some ordered lists
  • doc: remove number of commands in vDPA guide
  • doc: remove restriction on ixgbe vector support
  • doc: replace code blocks with includes in security guide
  • doc: update features in hns3 guide
  • doc: update kernel module entry in QAT guide
  • doc: update versions recommendations for i40e and ice
  • eal/riscv: fix vector type alignment
  • eal/unix: fix firmware reading with external xz helper
  • eal/windows: fix build with recent MinGW
  • ethdev: account for smaller MTU when setting default
  • ethdev: add check in async flow action query
  • ethdev: fix 32-bit build with GCC 13
  • ethdev: fix ESP packet type description
  • ethdev: fix function name in comment
  • event/cnxk: fix CASP usage for clang
  • event/cnxk: fix context flush in port cleanup
  • event/cnxk: fix getwork mode devargs parsing
  • event/cnxk: fix return values for capability API
  • eventdev/crypto: fix circular buffer full case
  • eventdev/eth_rx: fix timestamp field register in mbuf
  • eventdev: fix alignment padding
  • eventdev: fix device pointer for vdev-based devices
  • eventdev: fix missing driver names in info struct
  • eventdev: fix symbol export for port maintenance
  • event/dlb2: disable PASID
  • event/dlb2: fix disable PASID
  • event/dlb2: fix missing queue ordering capability flag
  • event/dlb2: fix name check in self-test
  • event/sw: fix ordering corruption with op release
  • event/sw: remove obsolete comment
  • examples/ethtool: fix pause configuration
  • examples/ipsec-secgw: fix partial overflow
  • fib6: fix adding default route as first route
  • fib: fix adding default route overwriting entire table
  • gpu/cuda: fix build with external GDRCopy
  • hash: align SSE lookup to scalar implementation
  • malloc: remove return from void functions
  • mem: fix deadlock with multiprocess
  • mempool: clarify enqueue/dequeue ops documentation
  • mempool/cnxk: fix alloc from non-EAL threads
  • mempool/cnxk: fix free from non-EAL threads
  • mempool: fix default ops for an empty mempool
  • mempool: fix get function documentation
  • meter: fix RFC4115 trTCM API Doxygen
  • net/af_packet: fix Rx and Tx queue state
  • net/af_xdp: fix Rx and Tx queue state
  • net/ark: support single function with multiple port
  • net/avp: fix Rx and Tx queue state
  • net/axgbe: identify CPU with cpuid
  • net/bnx2x: fix Rx and Tx queue state
  • net/bnxt: fix Rx and Tx queue state
  • net/bonding: fix header for C++
  • net/bonding: fix link status callback stop
  • net/bonding: fix possible overrun
  • net/bonding: fix Rx and Tx queue state
  • net/cnxk: fix data offset in vector Tx
  • net/cnxk: fix uninitialized variable
  • net/cxgbe: fix Rx and Tx queue state
  • net/dpaa2: fix Rx and Tx queue state
  • net/dpaa: fix Rx and Tx queue state
  • net/e1000: fix Rx and Tx queue state
  • net/ena: fix Rx and Tx queue state
  • net/enetc: fix Rx and Tx queue state
  • net/enic: avoid extra unlock in MTU set
  • net/enic: fix Rx and Tx queue state
  • net/gve: fix max MTU limit
  • net/gve: fix RX buffer size alignment
  • net/gve: update max Rx packet length to be based on MTU
  • net/hinic: fix Rx and Tx queue state
  • net/hns3: fix double stats for IMP and global reset
  • net/hns3: fix error code for multicast resource
  • net/hns3: fix flushing multicast MAC address
  • net/hns3: fix ignored reset event
  • net/hns3: fix IMP or global reset
  • net/hns3: fix LRO offload to report
  • net/hns3: fix mailbox sync
  • net/hns3: fix multiple reset detected log
  • net/hns3: fix order in NEON Rx
  • net/hns3: fix reset event status
  • net/hns3: fix setting DCB capability
  • net/hns3: fix some error logs
  • net/hns3: fix some return values
  • net/hns3: fix traffic management dump text alignment
  • net/hns3: fix traffic management thread safety
  • net/hns3: fix typo in function name
  • net/hns3: fix unchecked Rx free threshold
  • net/hns3: fix uninitialized hash algo value
  • net/hns3: fix VF default MAC modified when set failed
  • net/hns3: fix VF reset handler interruption
  • net/hns3: keep set/get algo key functions local
  • net/hns3: refactor interrupt state query
  • net/hns3: remove reset log in secondary
  • net/i40e: fix buffer leak on Rx reconfiguration
  • net/i40e: fix FDIR queue receives broadcast packets
  • net/iavf: fix checksum offloading
  • net/iavf: fix ESN session update
  • net/iavf: fix indent in Tx path
  • net/iavf: fix port stats clearing
  • net/iavf: fix TSO with big segments
  • net/iavf: fix Tx debug
  • net/iavf: fix Tx offload flags check
  • net/iavf: fix Tx offload mask
  • net/iavf: fix Tx preparation
  • net/iavf: fix VLAN offload strip flag
  • net/iavf: remove log from Tx prepare function
  • net/iavf: unregister interrupt handler before FD close
  • net/ice: fix crash on closing representor ports
  • net/ice: fix DCF port statistics
  • net/ice: fix initial link status
  • net/ice: fix L1 check interval
  • net/ice: fix TM configuration clearing
  • net/ice: fix TSO with big segments
  • net/ice: fix Tx preparation
  • net/ice: remove log from Tx prepare function
  • net/ice: write timestamp to first segment in scattered Rx
  • net/ipn3ke: fix Rx and Tx queue state
  • net/mana: add 32-bit short doorbell
  • net/mana: add missing new line to data path logs
  • net/mana: enable 32-bit build
  • net/memif: fix Rx and Tx queue state
  • net/mlx4: fix Rx and Tx queue state
  • net/mlx5: fix counter query during port close
  • net/mlx5: fix decap action checking in sample flow
  • net/mlx5: fix destroying external representor flow
  • net/mlx5: fix E-Switch mirror flow rule validation
  • net/mlx5: fix flow thread safety flag for HWS
  • net/mlx5: fix flow workspace double free in Windows
  • net/mlx5: fix hairpin queue states
  • net/mlx5: fix hairpin queue unbind
  • net/mlx5: fix jump ipool entry size
  • net/mlx5: fix LACP redirection in Rx domain
  • net/mlx5: fix leak in sysfs port name translation
  • net/mlx5: fix missing flow rules for external SQ
  • net/mlx5: fix MPRQ stride size check
  • net/mlx5: fix multi-segment Tx inline data length
  • net/mlx5: fix NIC flow capability query
  • net/mlx5: fix offset size in conntrack flow action
  • net/mlx5: fix shared Rx queue list management
  • net/mlx5: fix unlock mismatch
  • net/mlx5: fix use after free on Rx queue start
  • net/mlx5: fix validation of sample encap flow action
  • net/mlx5/hws: fix field copy bind
  • net/mlx5/hws: fix integrity bits level
  • net/mlx5: zero UDP checksum over IPv4 in encapsulation
  • net/mvneta: fix Rx and Tx queue state
  • net/mvpp2: fix Rx and Tx queue state
  • net/netvsc: increase VSP response timeout to 60 seconds
  • net/nfp: fix control message packets
  • net/nfp: fix crash on close
  • net/nfp: fix DMA error after abnormal exit
  • net/nfp: fix initialization of physical representors
  • net/nfp: fix link status interrupt
  • net/nfp: fix reconfigure logic in PF initialization
  • net/nfp: fix reconfigure logic in VF initialization
  • net/nfp: fix reconfigure logic of set MAC address
  • net/nfp: fix Rx and Tx queue state
  • net/ngbe: add proper memory barriers in Rx
  • net/ngbe: check process type in close operation
  • net/ngbe: fix flow control
  • net/ngbe: fix Rx and Tx queue state
  • net/ngbe: keep link down after device close
  • net/ngbe: prevent NIC from slowing down link speed
  • net/ngbe: reconfigure MAC Rx when link update
  • net/null: fix Rx and Tx queue state
  • net/octeon_ep: fix Rx and Tx queue state
  • net/octeontx: fix Rx and Tx queue state
  • net/pfe: fix Rx and Tx queue state
  • net/ring: fix Rx and Tx queue state
  • net/sfc: account for data offset on Tx
  • net/sfc: add missing error code indication to MAE init path
  • net/sfc: fix Rx and Tx queue state
  • net/sfc: remove null dereference in log
  • net/sfc: set max Rx packet length for representors
  • net/softnic: fix Rx and Tx queue state
  • net/tap: fix IPv4 checksum offloading
  • net/tap: fix L4 checksum offloading
  • net/tap: fix RSS for fragmented packets
  • net/tap: use MAC address parse API instead of local parser
  • net/txgbe: add proper memory barriers in Rx
  • net/txgbe: add Tx queue maximum limit
  • net/txgbe: check process type in close operation
  • net/txgbe: fix GRE tunnel packet checksum
  • net/txgbe: fix out of bound access
  • net/txgbe: fix Rx and Tx queue state
  • net/txgbe: keep link down after device close
  • net/txgbe: reconfigure MAC Rx when link update
  • net/vhost: fix Rx and Tx queue state
  • net/virtio: fix link state interrupt vector setting
  • net/virtio: fix missing next flag in Tx packed ring
  • net/virtio: fix Rx and Tx queue state
  • net/vmxnet3: fix Rx and Tx queue state
  • pdump: fix error number on IPC response
  • random: initialize state for unregistered non-EAL threads
  • rawdev: fix device class in log message
  • Revert “eventdev: fix alignment padding”
  • Revert “net/iavf: fix abnormal disable HW interrupt”
  • test/bbdev: assert failed test for queue configure
  • test/bbdev: fix Python script subprocess
  • test/bonding: add missing check
  • test/bonding: fix uninitialized RSS configuration
  • test/bonding: remove unreachable statement
  • test/crypto: fix IV in some vectors
  • test/crypto: fix return value for GMAC case
  • test/crypto: fix typo in asym tests
  • test/crypto: skip some synchronous tests with CPU crypto
  • test/event: fix crypto null device creation
  • test: fix named test macro
  • test/hash: fix creation error log
  • test/security: fix IPv6 next header field
  • usertools/pmdinfo: fix usage typos
  • vdpa/mlx5: fix unregister kick handler order
  • vhost: fix checking virtqueue access in stats API
  • vhost: fix check on virtqueue access in async registration
  • vhost: fix check on virtqueue access in in-flight getter
  • vhost: fix missing check on virtqueue access
  • vhost: fix missing lock protection in power monitor API
  • vhost: fix missing spinlock unlock
  • vhost: fix missing vring call check on virtqueue access

1.9.2. 22.11.4 Validation

  • Redhat Testing

    • Test scenarios

      • Guest with device assignment(PF) throughput testing(1G hugepage size)
      • Guest with device assignment(PF) throughput testing(2M hugepage size)
      • Guest with device assignment(VF) throughput testing
      • PVP (host dpdk testpmd as vswitch) 1Q: throughput testing
      • PVP vhost-user 4Q throughput testing
      • PVP vhost-user 2Q throughput testing
      • PVP vhost-user 1Q - cross numa node throughput testing
      • Guest with vhost-user 2 queues throughput testing
      • vhost-user reconnect with dpdk-client, qemu-server qemu reconnect
      • vhost-user reconnect with dpdk-client, qemu-server ovs reconnect
      • PVP 1Q live migration testing
      • PVP 1Q cross numa node live migration testing
      • Guest with ovs+dpdk+vhost-user 1Q live migration testing
      • Guest with ovs+dpdk+vhost-user 1Q live migration testing (2M)
      • Guest with ovs+dpdk+vhost-user 2Q live migration testing
      • Guest with ovs+dpdk+vhost-user 4Q live migration testing
      • Host PF + DPDK testing
      • Host VF + DPDK testing
    • Test Versions and device

      • qemu-kvm-7.2.0
      • kernel 5.14
      • X540-AT2 NIC(ixgbe, 10G)
  • Nvidia(R) Testing

    • Basic functionality:

      • Send and receive multiple types of traffic.
      • testpmd xstats counter test.
      • testpmd timestamp test.
      • Changing/checking link status through testpmd.
      • rte_flow tests (https://doc.dpdk.org/guides/nics/mlx5.html#supported-hardware-offloads)
      • RSS tests.
      • VLAN filtering, stripping, and insertion tests.
      • Checksum and TSO tests.
      • ptype tests.
      • link_status_interrupt example application tests.
      • l3fwd-power example application tests.
      • Multi-process example applications tests.
      • Hardware LRO tests.
      • Regex application tests.
      • Buffer Split tests.
      • Tx scheduling tests.
    • Test platform

      • NIC: ConnectX-6 Dx / OS: Ubuntu 20.04 / Driver: MLNX_OFED_LINUX-23.10-1.1.9.0 / Firmware: 22.39.2048
      • NIC: ConnectX-7 / OS: Ubuntu 20.04 / Driver: MLNX_OFED_LINUX-23.10-1.1.9.0 / Firmware: 28.39.2048
      • DPU: BlueField-2 / DOCA SW version: 2.5.0 / Firmware: 24.39.2048
    • OS/driver:

      • Ubuntu 20.04.6 with MLNX_OFED_LINUX-23.10-1.1.9.0.
      • Ubuntu 20.04.6 with rdma-core master (9016f34).
      • Ubuntu 20.04.6 with rdma-core v28.0.
      • Fedora 38 with rdma-core v44.0.
      • Fedora 40 (Rawhide) with rdma-core v48.0.
      • OpenSUSE Leap 15.5 with rdma-core v42.0.
      • Windows Server 2019 with Clang 16.0.6.
  • Intel(R) Testing

    • Basic Intel(R) NIC testing

      • Build & CFLAG compile: cover the build test combination with latest GCC/Clang version and the popular OS revision such as Ubuntu20.04, Ubuntu22.04, Fedora38, RHEL8.7, RHEL9.2, FreeBSD13.2, SUSE15, CentOS7.9, openEuler22.03-SP1,OpenAnolis8.8 etc.
      • PF(i40e, ixgbe): test scenarios including RTE_FLOW/TSO/Jumboframe/checksum offload/VLAN/VXLAN, etc.
      • VF(i40e, ixgbe): test scenarios including VF-RTE_FLOW/TSO/Jumboframe/checksum offload/VLAN/VXLAN, etc.
      • PF/VF(ice): test scenarios including Switch features/Package Management/Flow Director/Advanced Tx/Advanced RSS/ACL/DCF/Flexible Descriptor, etc.
      • Intel NIC single core/NIC performance: test scenarios including PF/VF single core performance test, etc.
      • IPsec: test scenarios including ipsec/ipsec-gw/ipsec library basic test - QAT&SW/FIB library, etc.
    • Basic cryptodev and virtio testing

      • Virtio: both function and performance test are covered. Such as PVP/Virtio_loopback/virtio-user loopback/virtio-net VM2VM perf testing/VMAWARE ESXI 8.0, etc.

      • Cryptodev:

        • Function test: test scenarios including Cryptodev API testing/CompressDev ISA-L/QAT/ZLIB PMD Testing/FIPS, etc.
        • Performance test: test scenarios including Thoughput Performance/Cryptodev Latency, etc.

1.9.3. 22.11.4 Known Issues