148. vm2vm vhost-user/virtio-net test plan

148.1. Description

This test plan test vhost tx offload (TSO and UFO) function by verifing the TSO/cksum in the TCP/IP stack enabled environment and UFO/cksum in the UDP/IP stack enabled environment with vm2vm split ring and packed ring vhost-user/virtio-net mergeable path. Also add case to check the payload of large packet is valid with vm2vm split ring and packed ring vhost-user/virtio-net mergeable and non-mergeable dequeue zero copy test. For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > v5.1.

148.2. Test flow

Virtio-net <-> Vhost <-> Testpmd <-> Vhost <-> Virtio-net

148.3. Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic

  1. Launch the Vhost sample by below commands:

    rm -rf vhost-net*
./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1'  -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start

  2. Launch VM1 and VM2:

    qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net0 \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096

    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 -chardev socket,id=char0,path=./vhost-net1 -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12

  3. On VM1, set virtio device IP and run arp protocal:

    ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02

  4. On VM2, set virtio device IP and run arp protocal:

    ifconfig ens5 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01

  5. Check the iperf performance between two VMs by below commands:

    Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`

  6. Check both 2VMs can receive and send big packets to each other:

    testpmd>show port xstats all
Port 0 should have tx packets above 1522
Port 1 should have rx packets above 1522

148.4. Test Case 2: VM2VM split ring vhost-user/virtio-net dequeue zero-copy test with tcp traffic

  1. Launch the Vhost sample by below commands:

    rm -rf vhost-net*
./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1'  -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start

  2. Launch VM1 and VM2:

    qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net0 \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096

    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 -chardev socket,id=char0,path=./vhost-net1 -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12

  3. On VM1, set virtio device IP and run arp protocal:

    ifconfig ens3 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02

  4. On VM2, set virtio device IP and run arp protocal:

    ifconfig ens3 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01

  5. Check the iperf performance between two VMs by below commands:

    Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`

  6. Check both 2VMs can receive and send big packets to each other:

    testpmd>show port xstats all
Port 0 should have tx packets above 1522
Port 1 should have rx packets above 1522

148.5. Test Case 3: VM2VM split ring vhost-user/virtio-net test with udp traffic

  1. Launch the Vhost sample by below commands:

    rm -rf vhost-net*
testpmd>./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1'  -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start

  2. Launch VM1 and VM2:

    qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net0 \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096

    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 -chardev socket,id=char0,path=./vhost-net1 -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12

  3. On VM1, set virtio device IP and run arp protocal:

    ifconfig ens3 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02

  4. On VM2, set virtio device IP and run arp protocal:

    ifconfig ens3 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01

  5. Check the iperf performance between two VMs by below commands:

    Under VM1, run: `iperf -s -u -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 30 -P 4 -u -b 1G -l 9000`

  6. Check both 2VMs can receive and send big packets to each other:

    testpmd>show port xstats all
Port 0 should have tx packets above 1522
Port 1 should have rx packets above 1522

148.6. Test Case 4: Check split ring virtio-net device capability

  1. Launch the Vhost sample by below commands:

    rm -rf vhost-net*
testpmd>./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1'  -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start

  2. Launch VM1 and VM2,set TSO and UFO on in qemu command:

    qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net0 \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096

    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 -chardev socket,id=char0,path=./vhost-net1 -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12

  3. Check UFO and TSO offload status on for the Virtio-net driver on VM1 and VM2:

    Under VM1, run: `run ethtool -k ens3`
udp-fragmentation-offload: on
tx-tcp-segmentation: on
tx-tcp-ecn-segmentation: on
tx-tcp6-segmentation: on

Under VM2, run: `run ethtool -k ens3`
udp-fragmentation-offload: on
tx-tcp-segmentation: on
tx-tcp-ecn-segmentation: on
tx-tcp6-segmentation: on

148.7. Test Case 5: VM2VM virtio-net split ring mergeable zero copy test with large packet payload valid check

  1. Launch the Vhost sample by below commands:

    rm -rf vhost-net*
./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1'  -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start

  2. Launch VM1 and VM2:

    qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net0 \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096

    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 -chardev socket,id=char0,path=./vhost-net1 -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12

  3. On VM1, set virtio device IP and run arp protocal:

    ifconfig ens3 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02

  4. On VM2, set virtio device IP and run arp protocal:

    ifconfig ens3 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01

  5. Scp 64KB file form VM1 to VM2:

    Under VM1, run: `scp [xxx] root@1.1.1.8:/`   [xxx] is the file name

148.8. Test Case 6: VM2VM virtio-net split ring non-mergeable zero copy test with large packet payload valid check

  1. Launch the Vhost sample by below commands:

    rm -rf vhost-net*
./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1'  -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start

  2. Launch VM1 and VM2:

    qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net0 \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096

    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 -chardev socket,id=char0,path=./vhost-net1 -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12

  3. On VM1, set virtio device IP and run arp protocal:

    ifconfig ens3 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02

  4. On VM2, set virtio device IP and run arp protocal:

    ifconfig ens3 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01

  5. Scp 64KB file form VM1 to VM2:

    Under VM1, run: `scp [xxx] root@1.1.1.8:/`   [xxx] is the file name

148.9. Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic

  1. Launch the Vhost sample by below commands::,packed=on

    rm -rf vhost-net* ./testpmd -l 2-4 -n 4 –no-pci –file-prefix=vhost –vdev ‘net_vhost0,iface=vhost-net0,queues=1’ –vdev ‘net_vhost1,iface=vhost-net1,queues=1’ – -i –nb-cores=2 –txd=1024 –rxd=1024 testpmd>start

  2. Launch VM1 and VM2:

    qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net0 \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096

    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 -chardev socket,id=char0,path=./vhost-net1 -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12

  3. On VM1, set virtio device IP and run arp protocal:

    ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02

  4. On VM2, set virtio device IP and run arp protocal:

    ifconfig ens5 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01

  5. Check the iperf performance between two VMs by below commands:

    Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`

  6. Check both 2VMs can receive and send big packets to each other:

    testpmd>show port xstats all
Port 0 should have tx packets above 1522
Port 1 should have rx packets above 1522

148.10. Test Case 8: VM2VM packed ring vhost-user/virtio-net dequeue zero-copy test with tcp traffic

  1. Launch the Vhost sample by below commands:

    rm -rf vhost-net*
./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1'  -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start

  2. Launch VM1 and VM2:

    qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net0 \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096

    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 -chardev socket,id=char0,path=./vhost-net1 -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12

  3. On VM1, set virtio device IP and run arp protocal:

    ifconfig ens3 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02

  4. On VM2, set virtio device IP and run arp protocal:

    ifconfig ens3 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01

  5. Check the iperf performance between two VMs by below commands:

    Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`

  6. Check both 2VMs can receive and send big packets to each other:

    testpmd>show port xstats all
Port 0 should have tx packets above 1522
Port 1 should have rx packets above 1522

148.11. Test Case 9: VM2VM packed ring vhost-user/virtio-net test with udp traffic

  1. Launch the Vhost sample by below commands:

    rm -rf vhost-net*
testpmd>./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1'  -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start

  2. Launch VM1 and VM2:

    qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net0 \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096

    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 -chardev socket,id=char0,path=./vhost-net1 -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12

  3. On VM1, set virtio device IP and run arp protocal:

    ifconfig ens3 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02

  4. On VM2, set virtio device IP and run arp protocal:

    ifconfig ens3 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01

  5. Check the iperf performance between two VMs by below commands:

    Under VM1, run: `iperf -s -u -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 30 -P 4 -u -b 1G -l 9000`

  6. Check both 2VMs can receive and send big packets to each other:

    testpmd>show port xstats all
Port 0 should have tx packets above 1522
Port 1 should have rx packets above 1522

148.12. Test Case 10: Check packed ring virtio-net device capability

  1. Launch the Vhost sample by below commands:

    rm -rf vhost-net*
testpmd>./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1'  -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start

  2. Launch VM1 and VM2,set TSO and UFO on in qemu command:

    qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net0 \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096

    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 -chardev socket,id=char0,path=./vhost-net1 -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12

  3. Check UFO and TSO offload status on for the Virtio-net driver on VM1 and VM2:

    Under VM1, run: `run ethtool -k ens3`
udp-fragmentation-offload: on
tx-tcp-segmentation: on
tx-tcp-ecn-segmentation: on
tx-tcp6-segmentation: on

Under VM2, run: `run ethtool -k ens3`
udp-fragmentation-offload: on
tx-tcp-segmentation: on
tx-tcp-ecn-segmentation: on
tx-tcp6-segmentation: on

148.13. Test Case 11: VM2VM packed ring virtio-net mergeable dequeue zero copy test with large packet payload valid check

  1. Launch the Vhost sample by below commands:

    rm -rf vhost-net*
./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1'  -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start

  2. Launch VM1 and VM2:

    qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net0 \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096

    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 -chardev socket,id=char0,path=./vhost-net1 -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12

  3. On VM1, set virtio device IP and run arp protocal:

    ifconfig ens3 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02

  4. On VM2, set virtio device IP and run arp protocal:

    ifconfig ens3 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01

  5. Scp 64KB file form VM1 to VM2:

    Under VM1, run: `scp [xxx] root@1.1.1.8:/`   [xxx] is the file name

148.14. Test Case 12: VM2VM packed ring virtio-net non-mergeable dequeue zero copy test with large packet payload valid check

  1. Launch the Vhost sample by below commands:

    rm -rf vhost-net*
./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1'  -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start

  2. Launch VM1 and VM2:

    qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net0 \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096

    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 -chardev socket,id=char0,path=./vhost-net1 -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12

  3. On VM1, set virtio device IP and run arp protocal:

    ifconfig ens3 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02

  4. On VM2, set virtio device IP and run arp protocal:

    ifconfig ens3 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01

  5. Scp 64KB file form VM1 to VM2:

    Under VM1, run: `scp [xxx] root@1.1.1.8:/`   [xxx] is the file name