61. vhost/virtio-user pvp with multi-queues and port restart test plan¶

61.1. Description¶

This test plan test vhost/virtio-user pvp multi-queues with split virtqueue and packed virtqueue different rx/tx paths, includes split virtqueue in-order mergeable, in-order non-mergeable, mergeable, non-mergeable, vector_rx path test, and packed virtqueue in-order mergeable, in-order non-mergeable, mergeable, non-mergeable path, also cover port restart test with each path.

61.2. Test flow¶

TG –> NIC –> Vhost –> Virtio–> Vhost –> NIC –> TG

61.3. Test Case 1: pvp 2 queues test with packed ring mergeable path¶

Bind one port to igb_uio, then launch vhost by below command:

rm -rf vhost-net*
./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start

Launch virtio-user by below command:

./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start

Send different ip packets with packet generator, check the throughput with below command:
```
testpmd>show port stats all
```
Check each queue’s rx/tx packet numbers:
```
testpmd>stop
```
Port restart 100 times by below command and re-calculate the average througnput,verify the throughput is not zero after port restart:
```
testpmd>stop
testpmd>start
...
testpmd>stop
testpmd>show port stats all
testpmd>start
testpmd>show port stats all
```

61.4. Test Case 2: pvp 2 queues test with packed ring non-mergeable path¶

Bind one port to igb_uio, then launch vhost by below command:

rm -rf vhost-net*
./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start

Launch virtio-user by below command:

./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start

Send different ip packets with packet generator, check the throughput with below command:
```
testpmd>show port stats all
```
Check each queue’s RX/TX packet numbers:
```
testpmd>stop
```
Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart:
```
testpmd>start
testpmd>show port stats all
```

61.5. Test Case 3: pvp 2 queues test with split ring inorder mergeable path¶

Bind one port to igb_uio, then launch vhost by below command:

rm -rf vhost-net*
./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start

Launch virtio-user by below command:

./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=1,mrg_rxbuf=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start

Send different ip packets with packet generator, check the throughput with below command:
```
testpmd>show port stats all
```
Check each queue’s RX/TX packet numbers:
```
testpmd>stop
```
Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart:
```
testpmd>start
testpmd>show port stats all
```

61.6. Test Case 4: pvp 2 queues test with split ring inorder non-mergeable path¶

Bind one port to igb_uio, then launch vhost by below command:

rm -rf vhost-net*
./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start

Launch virtio-user by below command:

./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=1,mrg_rxbuf=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start

Send different ip packets with packet generator, check the throughput with below command:
```
testpmd>show port stats all
```
Check each queue’s RX/TX packet numbers:
```
testpmd>stop
```
Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart:
```
testpmd>start
testpmd>show port stats all
```

61.7. Test Case 5: pvp 2 queues test with split ring mergeable path¶

Bind one port to igb_uio, then launch vhost by below command:

rm -rf vhost-net*
./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start

Launch virtio-user by below command:

./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start

Send different ip packets with packet generator, check the throughput with below command:
```
testpmd>show port stats all
```
Check each queue’s RX/TX packet numbers:
```
testpmd>stop
```
Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart:
```
testpmd>start
testpmd>show port stats all
```

61.8. Test Case 6: pvp 2 queues test with split ring non-mergeable path¶

Bind one port to igb_uio, then launch vhost by below command:

rm -rf vhost-net*
./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start

Launch virtio-user by below command:

./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start

Send different ip packets with packet generator, check the throughput with below command:
```
testpmd>show port stats all
```
Check each queue’s RX/TX packet numbers:
```
testpmd>stop
```
Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart:
```
testpmd>start
testpmd>show port stats all
```

61.9. Test Case 7: pvp 2 queues test with split ring vector_rx path¶

Bind one port to igb_uio, then launch vhost by below command:

rm -rf vhost-net*
./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start

Launch virtio-user by below command:

./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=0 \
-- -i --tx-offloads=0x0 --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start

Send different ip packets with packet generator, check the throughput with below command:
```
testpmd>show port stats all
```
Check each queue’s RX/TX packet numbers:
```
testpmd>stop
```
Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart:
```
testpmd>start
testpmd>show port stats all
```

61.10. Test Case 8: pvp 2 queues test with packed ring inorder mergeable path¶

Bind one port to igb_uio, then launch vhost by below command:

rm -rf vhost-net*
./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start

Launch virtio-user by below command:

./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start

Send different ip packets with packet generator, check the throughput with below command:
```
testpmd>show port stats all
```
Check each queue’s RX/TX packet numbers:
```
testpmd>stop
```
Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart:
```
testpmd>start
testpmd>show port stats all
```

61.11. Test Case 9: pvp 2 queues test with packed ring inorder non-mergeable path¶

Bind one port to igb_uio, then launch vhost by below command:

rm -rf vhost-net*
./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start

Launch virtio-user by below command:

./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start

Send different ip packets with packet generator, check the throughput with below command:
```
testpmd>show port stats all
```
Check each queue’s RX/TX packet numbers:
```
testpmd>stop
```
Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart:
```
testpmd>start
testpmd>show port stats all
```