161. Eventdev Pipeline Perf Tests¶
161.1. Prerequisites¶
Each of the 10Gb/25Gb/40Gb/100Gb Ethernet* ports of the DUT is directly connected in full-duplex to a different port of the peer Ixia ports(traffic generator).
Using TCL commands, the Ixia can be configured to send and receive traffic on a given set of ports.
If using vfio the kernel must be >= 3.6+ and VT-d must be enabled in bios.When using vfio, use the following commands to load the vfio driver and bind it to the device under test
modprobe vfio
modprobe vfio-pci
usertools/dpdk-devbind.py --bind=vfio-pci device_bus_id
usertools/dpdk-devbind.py --bind=vfio-pci eventdev_device_bus_id
161.2. Create huge pages¶
mkdir -p /dev/huge mount -t hugetlbfs none /dev/huge echo 24 > /proc/sys/vm/nr_hugepages
161.3. Configure limits of Eventdev devices¶
Set all eventdev devices sso and ssow limits to zero. Then set eventdev device under tests sso and ssow limits to non-zero values as per cores/queues requriments
echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/sso
echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/ssow
Example
echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/tim
echo 1 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/npa
echo 16 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/sso
echo 32 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/ssow
eventdev_device_bus_id/limits/sso: Max limit 256eventdev_device_bus_id/limits/ssow: Max limit 52
161.4. Test Case: Performance 1port atomic test¶
Description: Execute performance test with Atomic_atq type of stage in multi-flow situation for various cores.
Run the sample with below command:
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device_bus_id -- -w 0xc00000 -n=0 --dumpParameters:
-c, COREMASK : Hexadecimal bitmask of cores to run on -w, --pci-whitelist : Add a PCI device in white list. Only use the specified PCI devices. The argument format is <[domain:]bus:devid.func>. This option can be present several times (once per device). EAL Commands -w, --worker-mask=core mask : Run worker on CPUs in core mask -n, --packets=N : Send N packets (default ~32M), 0 implies no limit -D, --dump Print detailed statistics before exit
Use Ixia to send huge number of packets(with same 5-tuple and different 5-tuple)
Observe the speed of packets received(Rx-rate) on Ixia.
161.5. Test Case: Performance 1port parallel test¶
Description: Execute performance test with Parallel_atq type of stage in multi-flow situation for various cores.
Run the sample with below command:
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device_bus_id -- -w 0xc00000 -n=0 -p --dumpParameters:
-c, COREMASK : Hexadecimal bitmask of cores to run on -w, --pci-whitelist : Add a PCI device in white list. Only use the specified PCI devices. The argument format is <[domain:]bus:devid.func>. This option can be present several times (once per device). EAL Commands -w, --worker-mask=core mask : Run worker on CPUs in core mask -n, --packets=N : Send N packets (default ~32M), 0 implies no limit -p, --parallel : Use parallel scheduling -D, --dump : Print detailed statistics before exit
Use Ixia to send huge number of packets(with same 5-tuple and different 5-tuple)
Observe the speed of packets received(Rx-rate) on Ixia.
161.6. Test Case: Performance 1port ordered test¶
Description: Execute performance test with Ordered_atq type of stage in multi-flow situation for various cores.
Run the sample with below command:
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device_bus_id -- -w 0xc00000 -n=0 -o --dumpParameters:
-c, COREMASK : Hexadecimal bitmask of cores to run on -w, --pci-whitelist : Add a PCI device in white list. Only use the specified PCI devices. The argument format is <[domain:]bus:devid.func>. This option can be present several times (once per device). EAL Commands -w, --worker-mask=core mask : Run worker on CPUs in core mask -n, --packets=N : Send N packets (default ~32M), 0 implies no limit -o, --ordered Use ordered scheduling -D, --dump : Print detailed statistics before exit
Use Ixia to send huge number of packets(with same 5-tuple and different 5-tuple)
Observe the speed of packets received(Rx-rate) on Ixia.
161.7. Test Case: Performance 2port atomic test¶
Description: Execute performance test with Atomic_atq type of stage in multi-flow situation for various cores.
Run the sample with below command:
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 --dumpParameters:
-c, COREMASK : Hexadecimal bitmask of cores to run on -w, --pci-whitelist : Add a PCI device in white list. Only use the specified PCI devices. The argument format is <[domain:]bus:devid.func>. This option can be present several times (once per device). EAL Commands -w, --worker-mask=core mask : Run worker on CPUs in core mask -n, --packets=N : Send N packets (default ~32M), 0 implies no limit -D, --dump Print detailed statistics before exit
Use Ixia to send huge number of packets(with same 5-tuple and different 5-tuple)
Observe the speed of packets received(Rx-rate) on Ixia.
161.8. Test Case: Performance 2port parallel test¶
Description: Execute performance test with Parallel_atq type of stage in multi-flow situation for various cores.
Run the sample with below command:
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 -p --dumpParameters:
-c, COREMASK : Hexadecimal bitmask of cores to run on -w, --pci-whitelist : Add a PCI device in white list. Only use the specified PCI devices. The argument format is <[domain:]bus:devid.func>. This option can be present several times (once per device). EAL Commands -w, --worker-mask=core mask : Run worker on CPUs in core mask -n, --packets=N : Send N packets (default ~32M), 0 implies no limit -p, --parallel : Use parallel scheduling -D, --dump : Print detailed statistics before exit
Use Ixia to send huge number of packets(with same 5-tuple and different 5-tuple)
Observe the speed of packets received(Rx-rate) on Ixia.
161.9. Test Case: Performance 2port ordered test¶
Description: Execute performance test with Ordered_atq type of stage in multi-flow situation for various cores.
Run the sample with below command:
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 -o --dumpParameters:
-c, COREMASK : Hexadecimal bitmask of cores to run on -w, --pci-whitelist : Add a PCI device in white list. Only use the specified PCI devices. The argument format is <[domain:]bus:devid.func>. This option can be present several times (once per device). EAL Commands -w, --worker-mask=core mask : Run worker on CPUs in core mask -n, --packets=N : Send N packets (default ~32M), 0 implies no limit -o, --ordered Use ordered scheduling -D, --dump : Print detailed statistics before exit
Use Ixia to send huge number of packets(with same 5-tuple and different 5-tuple)
Observe the speed of packets received(Rx-rate) on Ixia.
161.10. Test Case: Performance 4port atomic test¶
Description: Execute performance test with Atomic_atq type of stage in multi-flow situation for various cores.
Run the sample with below command:
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -- -w 0xc00000 -n=0 --dumpParameters:
-c, COREMASK : Hexadecimal bitmask of cores to run on -w, --pci-whitelist : Add a PCI device in white list. Only use the specified PCI devices. The argument format is <[domain:]bus:devid.func>. This option can be present several times (once per device). EAL Commands -w, --worker-mask=core mask : Run worker on CPUs in core mask -n, --packets=N : Send N packets (default ~32M), 0 implies no limit -D, --dump Print detailed statistics before exit
Use Ixia to send huge number of packets(with same 5-tuple and different 5-tuple)
Observe the speed of packets received(Rx-rate) on Ixia.
161.11. Test Case: Performance 4port parallel test¶
Description: Execute performance test with Parallel_atq type of stage in multi-flow situation for various cores.
Run the sample with below command:
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -- -w 0xc00000 -n=0 -p --dumpParameters:
-c, COREMASK : Hexadecimal bitmask of cores to run on -w, --pci-whitelist : Add a PCI device in white list. Only use the specified PCI devices. The argument format is <[domain:]bus:devid.func>. This option can be present several times (once per device). EAL Commands -w, --worker-mask=core mask : Run worker on CPUs in core mask -n, --packets=N : Send N packets (default ~32M), 0 implies no limit -p, --parallel : Use parallel scheduling -D, --dump : Print detailed statistics before exit
Use Ixia to send huge number of packets(with same 5-tuple and different 5-tuple)
Observe the speed of packets received(Rx-rate) on Ixia.
161.12. Test Case: Performance 4port ordered test¶
Description: Execute performance test with Ordered_atq type of stage in multi-flow situation for various cores.
Run the sample with below command:
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -- -w 0xc00000 -n=0 -o --dumpParameters:
-c, COREMASK : Hexadecimal bitmask of cores to run on -w, --pci-whitelist : Add a PCI device in white list. Only use the specified PCI devices. The argument format is <[domain:]bus:devid.func>. This option can be present several times (once per device). EAL Commands -w, --worker-mask=core mask : Run worker on CPUs in core mask -n, --packets=N : Send N packets (default ~32M), 0 implies no limit -o, --ordered Use ordered scheduling -D, --dump : Print detailed statistics before exit
Use Ixia to send huge number of packets(with same 5-tuple and different 5-tuple)
Observe the speed of packets received(Rx-rate) on Ixia.