DPDK
22.11.6
|
#include <rte_eventdev.h>
Data Fields | |
int32_t | new_event_threshold |
uint16_t | dequeue_depth |
uint16_t | enqueue_depth |
uint32_t | event_port_cfg |
Event port configuration structure
Definition at line 848 of file rte_eventdev.h.
int32_t new_event_threshold |
A backpressure threshold for new event enqueues on this port. Use for closed system event dev where event capacity is limited, and cannot exceed the capacity of the event dev. Configuring ports with different thresholds can make higher priority traffic less likely to be backpressured. For example, a port used to inject NIC Rx packets into the event dev can have a lower threshold so as not to overwhelm the device, while ports used for worker pools can have a higher threshold. This value cannot exceed the nb_events_limit which was previously supplied to rte_event_dev_configure(). This should be set to '-1' for open system.
Definition at line 849 of file rte_eventdev.h.
uint16_t dequeue_depth |
Configure number of bulk dequeues for this event port. This value cannot exceed the nb_event_port_dequeue_depth which previously supplied to rte_event_dev_configure(). Ignored when device is not RTE_EVENT_DEV_CAP_BURST_MODE capable.
Definition at line 862 of file rte_eventdev.h.
uint16_t enqueue_depth |
Configure number of bulk enqueues for this event port. This value cannot exceed the nb_event_port_enqueue_depth which previously supplied to rte_event_dev_configure(). Ignored when device is not RTE_EVENT_DEV_CAP_BURST_MODE capable.
Definition at line 868 of file rte_eventdev.h.
uint32_t event_port_cfg |
Port cfg flags(EVENT_PORT_CFG_)
Definition at line 874 of file rte_eventdev.h.