rte_event_ring.h

Go to the documentation of this file.

/* SPDX-License-Identifier: BSD-3-Clause
 * Copyright(c) 2016-2017 Intel Corporation
 * Copyright(c) 2019 Arm Limited
 */
 
#ifndef _RTE_EVENT_RING_
#define _RTE_EVENT_RING_
 
#ifdef __cplusplus
extern "C" {
#endif
 
#include <stdint.h>
 
#include <rte_common.h>
#include <rte_ring.h>
#include <rte_ring_elem.h>
#include "rte_eventdev.h"
 
#define RTE_TAILQ_EVENT_RING_NAME "RTE_EVENT_RING"
 
struct rte_event_ring {
    struct rte_ring r;
};
 
static __rte_always_inline unsigned int
rte_event_ring_count(const struct rte_event_ring *r)
{
    return rte_ring_count(&r->r);
}
 
static __rte_always_inline unsigned int
rte_event_ring_free_count(const struct rte_event_ring *r)
{
    return rte_ring_free_count(&r->r);
}
 
static __rte_always_inline unsigned int
rte_event_ring_enqueue_burst(struct rte_event_ring *r,
        const struct rte_event *events,
        unsigned int n, uint16_t *free_space)
{
    unsigned int num;
    uint32_t space;
 
    num = rte_ring_enqueue_burst_elem(&r->r, events,
                sizeof(struct rte_event), n,
                &space);
 
    if (free_space != NULL)
        *free_space = space;
 
    return num;
}
 
static __rte_always_inline unsigned int
rte_event_ring_dequeue_burst(struct rte_event_ring *r,
        struct rte_event *events,
        unsigned int n, uint16_t *available)
{
    unsigned int num;
    uint32_t remaining;
 
    num = rte_ring_dequeue_burst_elem(&r->r, events,
                sizeof(struct rte_event), n,
                &remaining);
 
    if (available != NULL)
        *available = remaining;
 
    return num;
}
 
/*
 * Initializes an already-allocated ring structure
 *
 * @param r
 *   pointer to the ring memory to be initialized
 * @param name
 *   name to be given to the ring
 * @param count
 *   the number of elements to be stored in the ring. If the flag
 *   ``RING_F_EXACT_SZ`` is not set, this must be a power of 2, and the actual
 *   usable space in the ring will be ``count - 1`` entries. If the flag
 *   ``RING_F_EXACT_SZ`` is set, the this can be any value up to the ring size
 *   limit - 1, and the usable space will be exactly that requested.
 * @param flags
 *   An OR of the following:
 *    - RING_F_SP_ENQ: If this flag is set, the default behavior when
 *      using ``rte_ring_enqueue()`` or ``rte_ring_enqueue_bulk()``
 *      is "single-producer". Otherwise, it is "multi-producers".
 *    - RING_F_SC_DEQ: If this flag is set, the default behavior when
 *      using ``rte_ring_dequeue()`` or ``rte_ring_dequeue_bulk()``
 *      is "single-consumer". Otherwise, it is "multi-consumers".
 *    - RING_F_EXACT_SZ: If this flag is set, the ``count`` parameter is to
 *      be taken as the exact usable size of the ring, and as such does not
 *      need to be a power of 2. The underlying ring memory should be a
 *      power-of-2 size greater than the count value.
 * @return
 *   0 on success, or a negative value on error.
 */
int
rte_event_ring_init(struct rte_event_ring *r, const char *name,
    unsigned int count, unsigned int flags);
 
/*
 * Create an event ring structure
 *
 * This function allocates memory and initializes an event ring inside that
 * memory.
 *
 * @param name
 *   name to be given to the ring
 * @param count
 *   the number of elements to be stored in the ring. If the flag
 *   ``RING_F_EXACT_SZ`` is not set, this must be a power of 2, and the actual
 *   usable space in the ring will be ``count - 1`` entries. If the flag
 *   ``RING_F_EXACT_SZ`` is set, the this can be any value up to the ring size
 *   limit - 1, and the usable space will be exactly that requested.
 * @param socket_id
 *   The *socket_id* argument is the socket identifier in case of
 *   NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA
 *   constraint for the reserved zone.
 * @param flags
 *   An OR of the following:
 *    - RING_F_SP_ENQ: If this flag is set, the default behavior when
 *      using ``rte_ring_enqueue()`` or ``rte_ring_enqueue_bulk()``
 *      is "single-producer". Otherwise, it is "multi-producers".
 *    - RING_F_SC_DEQ: If this flag is set, the default behavior when
 *      using ``rte_ring_dequeue()`` or ``rte_ring_dequeue_bulk()``
 *      is "single-consumer". Otherwise, it is "multi-consumers".
 *    - RING_F_EXACT_SZ: If this flag is set, the ``count`` parameter is to
 *      be taken as the exact usable size of the ring, and as such does not
 *      need to be a power of 2. The underlying ring memory should be a
 *      power-of-2 size greater than the count value.
 * @return
 *   On success, the pointer to the new allocated ring. NULL on error with
 *    rte_errno set appropriately. Possible errno values include:
 *    - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
 *    - E_RTE_SECONDARY - function was called from a secondary process instance
 *    - EINVAL - count provided is not a power of 2
 *    - ENOSPC - the maximum number of memzones has already been allocated
 *    - EEXIST - a memzone with the same name already exists
 *    - ENOMEM - no appropriate memory area found in which to create memzone
 */
struct rte_event_ring *
rte_event_ring_create(const char *name, unsigned int count, int socket_id,
        unsigned int flags);
 
struct rte_event_ring *
rte_event_ring_lookup(const char *name);
 
void
rte_event_ring_free(struct rte_event_ring *r);
 
static inline unsigned int
rte_event_ring_get_size(const struct rte_event_ring *r)
{
    return rte_ring_get_size(&r->r);
}
 
static inline unsigned int
rte_event_ring_get_capacity(const struct rte_event_ring *r)
{
    return rte_ring_get_capacity(&r->r);
}
 
#ifdef __cplusplus
}
#endif
 
#endif