examples/vmdq/main.c

/* SPDX-License-Identifier: BSD-3-Clause
 * Copyright(c) 2010-2014 Intel Corporation
 */

#include <stdint.h>
#include <sys/queue.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <assert.h>
#include <errno.h>
#include <signal.h>
#include <stdarg.h>
#include <inttypes.h>
#include <getopt.h>

#include <rte_common.h>
#include <rte_log.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_eal.h>
#include <rte_launch.h>
#include <rte_atomic.h>
#include <rte_cycles.h>
#include <rte_prefetch.h>
#include <rte_lcore.h>
#include <rte_per_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
#include <rte_random.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>

#define MAX_QUEUES 1024
/*
 * 1024 queues require to meet the needs of a large number of vmdq_pools.
 * (RX/TX_queue_nb * RX/TX_ring_descriptors_nb) per port.
 */
#define NUM_MBUFS_PER_PORT (MAX_QUEUES * RTE_MAX(RTE_TEST_RX_DESC_DEFAULT, \
                        RTE_TEST_TX_DESC_DEFAULT))
#define MBUF_CACHE_SIZE 64

#define MAX_PKT_BURST 32

/*
 * Configurable number of RX/TX ring descriptors
 */
#define RTE_TEST_RX_DESC_DEFAULT 1024
#define RTE_TEST_TX_DESC_DEFAULT 1024

#define INVALID_PORT_ID 0xFF

/* mask of enabled ports */
static uint32_t enabled_port_mask;

/* number of pools (if user does not specify any, 8 by default */
static uint32_t num_queues = 8;
static uint32_t num_pools = 8;
static uint8_t rss_enable;

/* Default structure for VMDq. 8< */

/* empty vmdq configuration structure. Filled in programatically */
static const struct rte_eth_conf vmdq_conf_default = {
    .rxmode = {
        .mq_mode        = ETH_MQ_RX_VMDQ_ONLY,
        .split_hdr_size = 0,
    },

    .txmode = {
        .mq_mode = ETH_MQ_TX_NONE,
    },
    .rx_adv_conf = {
        /*
         * should be overridden separately in code with
         * appropriate values
         */
        .vmdq_rx_conf = {
            .nb_queue_pools = ETH_8_POOLS,
            .enable_default_pool = 0,
            .default_pool = 0,
            .nb_pool_maps = 0,
            .pool_map = {{0, 0},},
        },
    },
};
/* >8 End of Empty vdmq configuration structure. */

static unsigned lcore_ids[RTE_MAX_LCORE];
static uint16_t ports[RTE_MAX_ETHPORTS];
static unsigned num_ports; 
/* array used for printing out statistics */
volatile unsigned long rxPackets[MAX_QUEUES] = {0};

/* vlan_tags 8< */
const uint16_t vlan_tags[] = {
    0,  1,  2,  3,  4,  5,  6,  7,
    8,  9, 10, 11,  12, 13, 14, 15,
    16, 17, 18, 19, 20, 21, 22, 23,
    24, 25, 26, 27, 28, 29, 30, 31,
    32, 33, 34, 35, 36, 37, 38, 39,
    40, 41, 42, 43, 44, 45, 46, 47,
    48, 49, 50, 51, 52, 53, 54, 55,
    56, 57, 58, 59, 60, 61, 62, 63,
};
/* >8 End of vlan_tags. */

const uint16_t num_vlans = RTE_DIM(vlan_tags);
static uint16_t num_pf_queues,  num_vmdq_queues;
static uint16_t vmdq_pool_base, vmdq_queue_base;

/* Pool mac address template. 8< */

/* pool mac addr template, pool mac addr is like: 52 54 00 12 port# pool# */
static struct rte_ether_addr pool_addr_template = {
    .addr_bytes = {0x52, 0x54, 0x00, 0x12, 0x00, 0x00}
};
/* >8 End of mac addr template. */

/* ethernet addresses of ports */
static struct rte_ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];

#define MAX_QUEUE_NUM_10G 128
#define MAX_QUEUE_NUM_1G 8
#define MAX_POOL_MAP_NUM_10G 64
#define MAX_POOL_MAP_NUM_1G 32
#define MAX_POOL_NUM_10G 64
#define MAX_POOL_NUM_1G 8
/*
 * Builds up the correct configuration for vmdq based on the vlan tags array
 * given above, and determine the queue number and pool map number according to
 * valid pool number
 */

 /* Building correct configruration for vdmq. 8< */
static inline int
get_eth_conf(struct rte_eth_conf *eth_conf, uint32_t num_pools)
{
    struct rte_eth_vmdq_rx_conf conf;
    unsigned i;

    conf.nb_queue_pools = (enum rte_eth_nb_pools)num_pools;
    conf.nb_pool_maps = num_pools;
    conf.enable_default_pool = 0;
    conf.default_pool = 0; /* set explicit value, even if not used */

    for (i = 0; i < conf.nb_pool_maps; i++) {
        conf.pool_map[i].vlan_id = vlan_tags[i];
        conf.pool_map[i].pools = (1UL << (i % num_pools));
    }

    (void)(rte_memcpy(eth_conf, &vmdq_conf_default, sizeof(*eth_conf)));
    (void)(rte_memcpy(&eth_conf->rx_adv_conf.vmdq_rx_conf, &conf,
           sizeof(eth_conf->rx_adv_conf.vmdq_rx_conf)));
    if (rss_enable) {
        eth_conf->rxmode.mq_mode = ETH_MQ_RX_VMDQ_RSS;
        eth_conf->rx_adv_conf.rss_conf.rss_hf = ETH_RSS_IP |
                            ETH_RSS_UDP |
                            ETH_RSS_TCP |
                            ETH_RSS_SCTP;
    }
    return 0;
}

/*
 * Initialises a given port using global settings and with the rx buffers
 * coming from the mbuf_pool passed as parameter
 */
static inline int
port_init(uint16_t port, struct rte_mempool *mbuf_pool)
{
    struct rte_eth_dev_info dev_info;
    struct rte_eth_rxconf *rxconf;
    struct rte_eth_txconf *txconf;
    struct rte_eth_conf port_conf;
    uint16_t rxRings, txRings;
    uint16_t rxRingSize = RTE_TEST_RX_DESC_DEFAULT;
    uint16_t txRingSize = RTE_TEST_TX_DESC_DEFAULT;
    int retval;
    uint16_t q;
    uint16_t queues_per_pool;
    uint32_t max_nb_pools;
    uint64_t rss_hf_tmp;

    /*
     * The max pool number from dev_info will be used to validate the pool
     * number specified in cmd line
     */
    retval = rte_eth_dev_info_get(port, &dev_info);
    if (retval != 0) {
        printf("Error during getting device (port %u) info: %s\n",
                port, strerror(-retval));
        return retval;
    }

    max_nb_pools = (uint32_t)dev_info.max_vmdq_pools;
    /*
     * We allow to process part of VMDQ pools specified by num_pools in
     * command line.
     */
    if (num_pools > max_nb_pools) {
        printf("num_pools %d >max_nb_pools %d\n",
            num_pools, max_nb_pools);
        return -1;
    }
    retval = get_eth_conf(&port_conf, max_nb_pools);
    if (retval < 0)
        return retval;

    /*
     * NIC queues are divided into pf queues and vmdq queues.
     */
    /* There is assumption here all ports have the same configuration! */
    num_pf_queues = dev_info.max_rx_queues - dev_info.vmdq_queue_num;
    queues_per_pool = dev_info.vmdq_queue_num / dev_info.max_vmdq_pools;
    num_vmdq_queues = num_pools * queues_per_pool;
    num_queues = num_pf_queues + num_vmdq_queues;
    vmdq_queue_base = dev_info.vmdq_queue_base;
    vmdq_pool_base  = dev_info.vmdq_pool_base;

    printf("pf queue num: %u, configured vmdq pool num: %u,"
        " each vmdq pool has %u queues\n",
        num_pf_queues, num_pools, queues_per_pool);
    printf("vmdq queue base: %d pool base %d\n",
        vmdq_queue_base, vmdq_pool_base);
    if (!rte_eth_dev_is_valid_port(port))
        return -1;

    rss_hf_tmp = port_conf.rx_adv_conf.rss_conf.rss_hf;
    port_conf.rx_adv_conf.rss_conf.rss_hf &=
        dev_info.flow_type_rss_offloads;
    if (port_conf.rx_adv_conf.rss_conf.rss_hf != rss_hf_tmp) {
        printf("Port %u modified RSS hash function based on hardware support,"
            "requested:%#"PRIx64" configured:%#"PRIx64"\n",
            port,
            rss_hf_tmp,
            port_conf.rx_adv_conf.rss_conf.rss_hf);
    }

    /*
     * Though in this example, we only receive packets from the first queue
     * of each pool and send packets through first rte_lcore_count() tx
     * queues of vmdq queues, all queues including pf queues are setup.
     * This is because VMDQ queues doesn't always start from zero, and the
     * PMD layer doesn't support selectively initialising part of rx/tx
     * queues.
     */
    rxRings = (uint16_t)dev_info.max_rx_queues;
    txRings = (uint16_t)dev_info.max_tx_queues;

    retval = rte_eth_dev_info_get(port, &dev_info);
    if (retval != 0) {
        printf("Error during getting device (port %u) info: %s\n",
                port, strerror(-retval));
        return retval;
    }

    if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
        port_conf.txmode.offloads |=
            DEV_TX_OFFLOAD_MBUF_FAST_FREE;
    retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
    if (retval != 0)
        return retval;

    retval = rte_eth_dev_adjust_nb_rx_tx_desc(port, &rxRingSize,
                &txRingSize);
    if (retval != 0)
        return retval;
    if (RTE_MAX(rxRingSize, txRingSize) > RTE_MAX(RTE_TEST_RX_DESC_DEFAULT,
            RTE_TEST_TX_DESC_DEFAULT)) {
        printf("Mbuf pool has an insufficient size for port %u.\n",
            port);
        return -1;
    }

    rxconf = &dev_info.default_rxconf;
    rxconf->rx_drop_en = 1;
    txconf = &dev_info.default_txconf;
    txconf->offloads = port_conf.txmode.offloads;
    for (q = 0; q < rxRings; q++) {
        retval = rte_eth_rx_queue_setup(port, q, rxRingSize,
                    rte_eth_dev_socket_id(port),
                    rxconf,
                    mbuf_pool);
        if (retval < 0) {
            printf("initialise rx queue %d failed\n", q);
            return retval;
        }
    }

    for (q = 0; q < txRings; q++) {
        retval = rte_eth_tx_queue_setup(port, q, txRingSize,
                    rte_eth_dev_socket_id(port),
                    txconf);
        if (retval < 0) {
            printf("initialise tx queue %d failed\n", q);
            return retval;
        }
    }

    retval  = rte_eth_dev_start(port);
    if (retval < 0) {
        printf("port %d start failed\n", port);
        return retval;
    }

    retval = rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
    if (retval < 0) {
        printf("port %d MAC address get failed: %s\n", port,
               rte_strerror(-retval));
        return retval;
    }
    printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
            " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
            (unsigned)port,
            vmdq_ports_eth_addr[port].addr_bytes[0],
            vmdq_ports_eth_addr[port].addr_bytes[1],
            vmdq_ports_eth_addr[port].addr_bytes[2],
            vmdq_ports_eth_addr[port].addr_bytes[3],
            vmdq_ports_eth_addr[port].addr_bytes[4],
            vmdq_ports_eth_addr[port].addr_bytes[5]);

    /*
     * Set mac for each pool.
     * There is no default mac for the pools in i40.
     * Removes this after i40e fixes this issue.
     */
    for (q = 0; q < num_pools; q++) {
        struct rte_ether_addr mac;
        mac = pool_addr_template;
        mac.addr_bytes[4] = port;
        mac.addr_bytes[5] = q;
        printf("Port %u vmdq pool %u set mac %02x:%02x:%02x:%02x:%02x:%02x\n",
            port, q,
            mac.addr_bytes[0], mac.addr_bytes[1],
            mac.addr_bytes[2], mac.addr_bytes[3],
            mac.addr_bytes[4], mac.addr_bytes[5]);
        retval = rte_eth_dev_mac_addr_add(port, &mac,
                q + vmdq_pool_base);
        if (retval) {
            printf("mac addr add failed at pool %d\n", q);
            return retval;
        }
    }

    return 0;
}
/* >8 End of get_eth_conf. */

/* Check num_pools parameter and set it if OK*/
static int
vmdq_parse_num_pools(const char *q_arg)
{
    char *end = NULL;
    int n;

    /* parse number string */
    n = strtol(q_arg, &end, 10);
    if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
        return -1;

    if (num_pools > num_vlans) {
        printf("num_pools %d > num_vlans %d\n", num_pools, num_vlans);
        return -1;
    }

    num_pools = n;

    return 0;
}


static int
parse_portmask(const char *portmask)
{
    char *end = NULL;
    unsigned long pm;

    /* parse hexadecimal string */
    pm = strtoul(portmask, &end, 16);
    if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
        return 0;

    return pm;
}

/* Display usage */
static void
vmdq_usage(const char *prgname)
{
    printf("%s [EAL options] -- -p PORTMASK]\n"
    "  --nb-pools NP: number of pools\n"
    "  --enable-rss: enable RSS (disabled by default)\n",
           prgname);
}

/*  Parse the argument (num_pools) given in the command line of the application */
static int
vmdq_parse_args(int argc, char **argv)
{
    int opt;
    int option_index;
    unsigned i;
    const char *prgname = argv[0];
    static struct option long_option[] = {
        {"nb-pools", required_argument, NULL, 0},
        {"enable-rss", 0, NULL, 0},
        {NULL, 0, 0, 0}
    };

    /* Parse command line */
    while ((opt = getopt_long(argc, argv, "p:", long_option,
        &option_index)) != EOF) {
        switch (opt) {
        /* portmask */
        case 'p':
            enabled_port_mask = parse_portmask(optarg);
            if (enabled_port_mask == 0) {
                printf("invalid portmask\n");
                vmdq_usage(prgname);
                return -1;
            }
            break;
        case 0:
            if (!strcmp(long_option[option_index].name,
                "nb-pools")) {
                if (vmdq_parse_num_pools(optarg) == -1) {
                    printf("invalid number of pools\n");
                    vmdq_usage(prgname);
                    return -1;
                }
            }

            if (!strcmp(long_option[option_index].name,
                "enable-rss"))
                rss_enable = 1;
            break;

        default:
            vmdq_usage(prgname);
            return -1;
        }
    }

    for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
        if (enabled_port_mask & (1 << i))
            ports[num_ports++] = (uint8_t)i;
    }

    if (num_ports < 2 || num_ports % 2) {
        printf("Current enabled port number is %u,"
            "but it should be even and at least 2\n", num_ports);
        return -1;
    }

    return 0;
}

static void
update_mac_address(struct rte_mbuf *m, unsigned dst_port)
{
    struct rte_ether_hdr *eth;
    void *tmp;

    eth = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);

    /* 02:00:00:00:00:xx */
    tmp = &eth->d_addr.addr_bytes[0];
    *((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);

    /* src addr */
    rte_ether_addr_copy(&vmdq_ports_eth_addr[dst_port], &eth->s_addr);
}

/* When we receive a HUP signal, print out our stats */
static void
sighup_handler(int signum)
{
    unsigned int q = vmdq_queue_base;
    for (; q < num_queues; q++) {
        if ((q - vmdq_queue_base) % (num_vmdq_queues / num_pools) == 0)
            printf("\nPool %u: ", (q - vmdq_queue_base) /
                   (num_vmdq_queues / num_pools));
        printf("%lu ", rxPackets[q]);
    }
    printf("\nFinished handling signal %d\n", signum);
}

/*
 * Main thread that does the work, reading from INPUT_PORT
 * and writing to OUTPUT_PORT
 */
static int
lcore_main(__rte_unused void *dummy)
{
    const uint16_t lcore_id = (uint16_t)rte_lcore_id();
    const uint16_t num_cores = (uint16_t)rte_lcore_count();
    uint16_t core_id = 0;
    uint16_t startQueue, endQueue;
    uint16_t q, i, p;
    const uint16_t remainder = (uint16_t)(num_vmdq_queues % num_cores);

    for (i = 0; i < num_cores; i++)
        if (lcore_ids[i] == lcore_id) {
            core_id = i;
            break;
        }

    if (remainder != 0) {
        if (core_id < remainder) {
            startQueue = (uint16_t)(core_id *
                    (num_vmdq_queues / num_cores + 1));
            endQueue = (uint16_t)(startQueue +
                    (num_vmdq_queues / num_cores) + 1);
        } else {
            startQueue = (uint16_t)(core_id *
                    (num_vmdq_queues / num_cores) +
                    remainder);
            endQueue = (uint16_t)(startQueue +
                    (num_vmdq_queues / num_cores));
        }
    } else {
        startQueue = (uint16_t)(core_id *
                (num_vmdq_queues / num_cores));
        endQueue = (uint16_t)(startQueue +
                (num_vmdq_queues / num_cores));
    }

    /* vmdq queue idx doesn't always start from zero.*/
    startQueue += vmdq_queue_base;
    endQueue   += vmdq_queue_base;
    printf("core %u(lcore %u) reading queues %i-%i\n", (unsigned)core_id,
        (unsigned)lcore_id, startQueue, endQueue - 1);

    if (startQueue == endQueue) {
        printf("lcore %u has nothing to do\n", lcore_id);
        return 0;
    }

    for (;;) {
        struct rte_mbuf *buf[MAX_PKT_BURST];
        const uint16_t buf_size = RTE_DIM(buf);

        for (p = 0; p < num_ports; p++) {
            const uint8_t sport = ports[p];
            /* 0 <-> 1, 2 <-> 3 etc */
            const uint8_t dport = ports[p ^ 1];
            if ((sport == INVALID_PORT_ID) || (dport == INVALID_PORT_ID))
                continue;

            for (q = startQueue; q < endQueue; q++) {
                const uint16_t rxCount = rte_eth_rx_burst(sport,
                    q, buf, buf_size);

                if (unlikely(rxCount == 0))
                    continue;

                rxPackets[q] += rxCount;

                for (i = 0; i < rxCount; i++)
                    update_mac_address(buf[i], dport);

                const uint16_t txCount = rte_eth_tx_burst(dport,
                    vmdq_queue_base + core_id,
                    buf,
                    rxCount);

                if (txCount != rxCount) {
                    for (i = txCount; i < rxCount; i++)
                        rte_pktmbuf_free(buf[i]);
                }
            }
        }
    }
}

/*
 * Update the global var NUM_PORTS and array PORTS according to system ports number
 * and return valid ports number
 */
static unsigned check_ports_num(unsigned nb_ports)
{
    unsigned valid_num_ports = num_ports;
    unsigned portid;

    if (num_ports > nb_ports) {
        printf("\nSpecified port number(%u) exceeds total system port number(%u)\n",
            num_ports, nb_ports);
        num_ports = nb_ports;
    }

    for (portid = 0; portid < num_ports; portid++) {
        if (!rte_eth_dev_is_valid_port(ports[portid])) {
            printf("\nSpecified port ID(%u) is not valid\n",
                ports[portid]);
            ports[portid] = INVALID_PORT_ID;
            valid_num_ports--;
        }
    }
    return valid_num_ports;
}

/* Main function, does initialisation and calls the per-lcore functions */
int
main(int argc, char *argv[])
{
    struct rte_mempool *mbuf_pool;
    unsigned lcore_id, core_id = 0;
    int ret;
    unsigned nb_ports, valid_num_ports;
    uint16_t portid;

    signal(SIGHUP, sighup_handler);

    /* init EAL */
    ret = rte_eal_init(argc, argv);
    if (ret < 0)
        rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
    argc -= ret;
    argv += ret;

    /* parse app arguments */
    ret = vmdq_parse_args(argc, argv);
    if (ret < 0)
        rte_exit(EXIT_FAILURE, "Invalid VMDQ argument\n");

    for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++)
        if (rte_lcore_is_enabled(lcore_id))
            lcore_ids[core_id++] = lcore_id;

    if (rte_lcore_count() > RTE_MAX_LCORE)
        rte_exit(EXIT_FAILURE, "Not enough cores\n");

    nb_ports = rte_eth_dev_count_avail();

    /*
     * Update the global var NUM_PORTS and global array PORTS
     * and get value of var VALID_NUM_PORTS according to system ports number
     */
    valid_num_ports = check_ports_num(nb_ports);

    if (valid_num_ports < 2 || valid_num_ports % 2) {
        printf("Current valid ports number is %u\n", valid_num_ports);
        rte_exit(EXIT_FAILURE, "Error with valid ports number is not even or less than 2\n");
    }

    mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
        NUM_MBUFS_PER_PORT * nb_ports, MBUF_CACHE_SIZE,
        0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
    if (mbuf_pool == NULL)
        rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");

    /* initialize all ports */
    RTE_ETH_FOREACH_DEV(portid) {
        /* skip ports that are not enabled */
        if ((enabled_port_mask & (1 << portid)) == 0) {
            printf("\nSkipping disabled port %d\n", portid);
            continue;
        }
        if (port_init(portid, mbuf_pool) != 0)
            rte_exit(EXIT_FAILURE, "Cannot initialize network ports\n");
    }

    /* call lcore_main() on every lcore */
    rte_eal_mp_remote_launch(lcore_main, NULL, CALL_MAIN);
    RTE_LCORE_FOREACH_WORKER(lcore_id) {
        if (rte_eal_wait_lcore(lcore_id) < 0)
            return -1;
    }

    /* clean up the EAL */
    rte_eal_cleanup();

    return 0;
}