|
| const char *__rte_experimental | rte_compressdev_get_feature_name (uint64_t flag) |
| |
| int __rte_experimental | rte_compressdev_get_dev_id (const char *name) |
| |
| const char *__rte_experimental | rte_compressdev_name_get (uint8_t dev_id) |
| |
| uint8_t __rte_experimental | rte_compressdev_count (void) |
| |
| uint8_t __rte_experimental | rte_compressdev_devices_get (const char *driver_name, uint8_t *devices, uint8_t nb_devices) |
| |
| int __rte_experimental | rte_compressdev_configure (uint8_t dev_id, struct rte_compressdev_config *config) |
| |
| int __rte_experimental | rte_compressdev_start (uint8_t dev_id) |
| |
| void __rte_experimental | rte_compressdev_stop (uint8_t dev_id) |
| |
| int __rte_experimental | rte_compressdev_close (uint8_t dev_id) |
| |
| int __rte_experimental | rte_compressdev_queue_pair_setup (uint8_t dev_id, uint16_t queue_pair_id, uint32_t max_inflight_ops, int socket_id) |
| |
| uint16_t __rte_experimental | rte_compressdev_queue_pair_count (uint8_t dev_id) |
| |
| int __rte_experimental | rte_compressdev_stats_get (uint8_t dev_id, struct rte_compressdev_stats *stats) |
| |
| void __rte_experimental | rte_compressdev_stats_reset (uint8_t dev_id) |
| |
| void __rte_experimental | rte_compressdev_info_get (uint8_t dev_id, struct rte_compressdev_info *dev_info) |
| |
| uint16_t __rte_experimental | rte_compressdev_dequeue_burst (uint8_t dev_id, uint16_t qp_id, struct rte_comp_op **ops, uint16_t nb_ops) |
| |
| uint16_t __rte_experimental | rte_compressdev_enqueue_burst (uint8_t dev_id, uint16_t qp_id, struct rte_comp_op **ops, uint16_t nb_ops) |
| |
| int __rte_experimental | rte_compressdev_stream_create (uint8_t dev_id, const struct rte_comp_xform *xform, void **stream) |
| |
| int __rte_experimental | rte_compressdev_stream_free (uint8_t dev_id, void *stream) |
| |
| int __rte_experimental | rte_compressdev_private_xform_create (uint8_t dev_id, const struct rte_comp_xform *xform, void **private_xform) |
| |
| int __rte_experimental | rte_compressdev_private_xform_free (uint8_t dev_id, void *private_xform) |
| |
RTE Compression Device APIs.
- Warning
- EXPERIMENTAL: All functions in this file may be changed or removed without prior notice.
Defines comp device APIs for the provisioning of compression operations.
Definition in file rte_compressdev.h.
| uint16_t __rte_experimental rte_compressdev_dequeue_burst |
( |
uint8_t |
dev_id, |
|
|
uint16_t |
qp_id, |
|
|
struct rte_comp_op ** |
ops, |
|
|
uint16_t |
nb_ops |
|
) |
| |
Dequeue a burst of processed compression operations from a queue on the comp device. The dequeued operation are stored in rte_comp_op structures whose pointers are supplied in the ops array.
The rte_compressdev_dequeue_burst() function returns the number of ops actually dequeued, which is the number of rte_comp_op data structures effectively supplied into the ops array.
A return value equal to nb_ops indicates that the queue contained at least nb_ops operations, and this is likely to signify that other processed operations remain in the devices output queue. Applications implementing a "retrieve as many processed operations as possible" policy can check this specific case and keep invoking the rte_compressdev_dequeue_burst() function until a value less than nb_ops is returned.
The rte_compressdev_dequeue_burst() function does not provide any error notification to avoid the corresponding overhead.
- Note
- : operation ordering is not maintained within the queue pair.
-
: In case op status = OUT_OF_SPACE_TERMINATED, op.consumed=0 and the op must be resubmitted with the same input data and a larger output buffer. op.produced is usually 0, but in decompression cases a PMD may return > 0 and the application may find it useful to inspect that data. This status is only returned on STATELESS ops.
-
: In case op status = OUT_OF_SPACE_RECOVERABLE, op.produced can be used and next op in stream should continue on from op.consumed+1 with a fresh output buffer. Consumed=0, produced=0 is an unusual but allowed case. There may be useful state/history stored in the PMD, even though no output was produced yet.
- Parameters
-
| dev_id | Compress device identifier |
| qp_id | The index of the queue pair from which to retrieve processed operations. The value must be in the range [0, nb_queue_pair - 1] previously supplied to rte_compressdev_configure() |
| ops | The address of an array of pointers to rte_comp_op structures that must be large enough to store nb_ops pointers in it |
| nb_ops | The maximum number of operations to dequeue |
- Returns
- The number of operations actually dequeued, which is the number of pointers to rte_comp_op structures effectively supplied to the ops array.
| uint16_t __rte_experimental rte_compressdev_enqueue_burst |
( |
uint8_t |
dev_id, |
|
|
uint16_t |
qp_id, |
|
|
struct rte_comp_op ** |
ops, |
|
|
uint16_t |
nb_ops |
|
) |
| |
Enqueue a burst of operations for processing on a compression device.
The rte_compressdev_enqueue_burst() function is invoked to place comp operations on the queue qp_id of the device designated by its dev_id.
The nb_ops parameter is the number of operations to process which are supplied in the ops array of rte_comp_op structures.
The rte_compressdev_enqueue_burst() function returns the number of operations it actually enqueued for processing. A return value equal to nb_ops means that all packets have been enqueued.
- Note
- All compression operations are Out-of-place (OOP) operations, as the size of the output data is different to the size of the input data.
-
The rte_comp_op contains both input and output parameters and is the vehicle for the application to pass data into and out of the PMD. While an op is inflight, i.e. once it has been enqueued, the private_xform or stream attached to it and any mbufs or memory referenced by it should not be altered or freed by the application. The PMD may use or change some of this data at any time until it has been returned in a dequeue operation.
-
The flush flag only applies to operations which return SUCCESS. In OUT_OF_SPACE cases whether STATEFUL or STATELESS, data in dest buffer is as if flush flag was FLUSH_NONE.
-
flush flag only applies in compression direction. It has no meaning for decompression.
-
: operation ordering is not maintained within the queue pair.
- Parameters
-
| dev_id | Compress device identifier |
| qp_id | The index of the queue pair on which operations are to be enqueued for processing. The value must be in the range [0, nb_queue_pairs - 1] previously supplied to rte_compressdev_configure |
| ops | The address of an array of nb_ops pointers to rte_comp_op structures which contain the operations to be processed |
| nb_ops | The number of operations to process |
- Returns
- The number of operations actually enqueued on the device. The return value can be less than the value of the nb_ops parameter when the comp devices queue is full or if invalid parameters are specified in a rte_comp_op.
