examples/qos_sched/init.c

/* SPDX-License-Identifier: BSD-3-Clause
 * Copyright(c) 2010-2014 Intel Corporation
 */

#include <stdint.h>
#include <memory.h>

#include <rte_log.h>
#include <rte_mbuf.h>
#include <rte_debug.h>
#include <rte_ethdev.h>
#include <rte_mempool.h>
#include <rte_sched.h>
#include <rte_cycles.h>
#include <rte_string_fns.h>
#include <rte_cfgfile.h>

#include "main.h"
#include "cfg_file.h"

uint32_t app_numa_mask = 0;
static uint32_t app_inited_port_mask = 0;

int app_pipe_to_profile[MAX_SCHED_SUBPORTS][MAX_SCHED_PIPES];

#define MAX_NAME_LEN 32

struct ring_conf ring_conf = {
    .rx_size   = APP_RX_DESC_DEFAULT,
    .ring_size = APP_RING_SIZE,
    .tx_size   = APP_TX_DESC_DEFAULT,
};

struct burst_conf burst_conf = {
    .rx_burst    = MAX_PKT_RX_BURST,
    .ring_burst  = PKT_ENQUEUE,
    .qos_dequeue = PKT_DEQUEUE,
    .tx_burst    = MAX_PKT_TX_BURST,
};

struct ring_thresh rx_thresh = {
    .pthresh = RX_PTHRESH,
    .hthresh = RX_HTHRESH,
    .wthresh = RX_WTHRESH,
};

struct ring_thresh tx_thresh = {
    .pthresh = TX_PTHRESH,
    .hthresh = TX_HTHRESH,
    .wthresh = TX_WTHRESH,
};

uint32_t nb_pfc;
const char *cfg_profile = NULL;
int mp_size = NB_MBUF;
struct flow_conf qos_conf[MAX_DATA_STREAMS];

static struct rte_eth_conf port_conf = {
    .rxmode = {
        .max_rx_pkt_len = ETHER_MAX_LEN,
        .split_hdr_size = 0,
    },
    .txmode = {
        .mq_mode = ETH_DCB_NONE,
    },
};

static int
app_init_port(uint16_t portid, struct rte_mempool *mp)
{
    int ret;
    struct rte_eth_link link;
    struct rte_eth_dev_info dev_info;
    struct rte_eth_rxconf rx_conf;
    struct rte_eth_txconf tx_conf;
    uint16_t rx_size;
    uint16_t tx_size;
    struct rte_eth_conf local_port_conf = port_conf;

    /* check if port already initialized (multistream configuration) */
    if (app_inited_port_mask & (1u << portid))
        return 0;

    rx_conf.rx_thresh.pthresh = rx_thresh.pthresh;
    rx_conf.rx_thresh.hthresh = rx_thresh.hthresh;
    rx_conf.rx_thresh.wthresh = rx_thresh.wthresh;
    rx_conf.rx_free_thresh = 32;
    rx_conf.rx_drop_en = 0;
    rx_conf.rx_deferred_start = 0;

    tx_conf.tx_thresh.pthresh = tx_thresh.pthresh;
    tx_conf.tx_thresh.hthresh = tx_thresh.hthresh;
    tx_conf.tx_thresh.wthresh = tx_thresh.wthresh;
    tx_conf.tx_free_thresh = 0;
    tx_conf.tx_rs_thresh = 0;
    tx_conf.tx_deferred_start = 0;

    /* init port */
    RTE_LOG(INFO, APP, "Initializing port %"PRIu16"... ", portid);
    fflush(stdout);
    rte_eth_dev_info_get(portid, &dev_info);
    if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
        local_port_conf.txmode.offloads |=
            DEV_TX_OFFLOAD_MBUF_FAST_FREE;
    ret = rte_eth_dev_configure(portid, 1, 1, &local_port_conf);
    if (ret < 0)
        rte_exit(EXIT_FAILURE,
             "Cannot configure device: err=%d, port=%u\n",
             ret, portid);

    rx_size = ring_conf.rx_size;
    tx_size = ring_conf.tx_size;
    ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &rx_size, &tx_size);
    if (ret < 0)
        rte_exit(EXIT_FAILURE,
             "rte_eth_dev_adjust_nb_rx_tx_desc: err=%d,port=%u\n",
             ret, portid);
    ring_conf.rx_size = rx_size;
    ring_conf.tx_size = tx_size;

    /* init one RX queue */
    fflush(stdout);
    rx_conf.offloads = local_port_conf.rxmode.offloads;
    ret = rte_eth_rx_queue_setup(portid, 0, (uint16_t)ring_conf.rx_size,
        rte_eth_dev_socket_id(portid), &rx_conf, mp);
    if (ret < 0)
        rte_exit(EXIT_FAILURE,
             "rte_eth_tx_queue_setup: err=%d, port=%u\n",
             ret, portid);

    /* init one TX queue */
    fflush(stdout);
    tx_conf.offloads = local_port_conf.txmode.offloads;
    ret = rte_eth_tx_queue_setup(portid, 0,
        (uint16_t)ring_conf.tx_size, rte_eth_dev_socket_id(portid), &tx_conf);
    if (ret < 0)
        rte_exit(EXIT_FAILURE,
             "rte_eth_tx_queue_setup: err=%d, port=%u queue=%d\n",
             ret, portid, 0);

    /* Start device */
    ret = rte_eth_dev_start(portid);
    if (ret < 0)
        rte_exit(EXIT_FAILURE,
             "rte_pmd_port_start: err=%d, port=%u\n",
             ret, portid);

    printf("done: ");

    /* get link status */
    rte_eth_link_get(portid, &link);
    if (link.link_status) {
        printf(" Link Up - speed %u Mbps - %s\n",
            (uint32_t) link.link_speed,
            (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
            ("full-duplex") : ("half-duplex"));
    } else {
        printf(" Link Down\n");
    }
    rte_eth_promiscuous_enable(portid);

    /* mark port as initialized */
    app_inited_port_mask |= 1u << portid;

    return 0;
}

static struct rte_sched_subport_params subport_params[MAX_SCHED_SUBPORTS] = {
    {
        .tb_rate = 1250000000,
        .tb_size = 1000000,

        .tc_rate = {1250000000, 1250000000, 1250000000, 1250000000},
        .tc_period = 10,
    },
};

static struct rte_sched_pipe_params pipe_profiles[RTE_SCHED_PIPE_PROFILES_PER_PORT] = {
    { /* Profile #0 */
        .tb_rate = 305175,
        .tb_size = 1000000,

        .tc_rate = {305175, 305175, 305175, 305175},
        .tc_period = 40,
#ifdef RTE_SCHED_SUBPORT_TC_OV
        .tc_ov_weight = 1,
#endif

        .wrr_weights = {1, 1, 1, 1,  1, 1, 1, 1,  1, 1, 1, 1,  1, 1, 1, 1},
    },
};

struct rte_sched_port_params port_params = {
    .name = "port_scheduler_0",
    .socket = 0, /* computed */
    .rate = 0, /* computed */
    .mtu = 6 + 6 + 4 + 4 + 2 + 1500,
    .frame_overhead = RTE_SCHED_FRAME_OVERHEAD_DEFAULT,
    .n_subports_per_port = 1,
    .n_pipes_per_subport = 4096,
    .qsize = {64, 64, 64, 64},
    .pipe_profiles = pipe_profiles,
    .n_pipe_profiles = sizeof(pipe_profiles) / sizeof(struct rte_sched_pipe_params),

#ifdef RTE_SCHED_RED
    .red_params = {
        /* Traffic Class 0 Colors Green / Yellow / Red */
        [0][0] = {.min_th = 48, .max_th = 64, .maxp_inv = 10, .wq_log2 = 9},
        [0][1] = {.min_th = 40, .max_th = 64, .maxp_inv = 10, .wq_log2 = 9},
        [0][2] = {.min_th = 32, .max_th = 64, .maxp_inv = 10, .wq_log2 = 9},

        /* Traffic Class 1 - Colors Green / Yellow / Red */
        [1][0] = {.min_th = 48, .max_th = 64, .maxp_inv = 10, .wq_log2 = 9},
        [1][1] = {.min_th = 40, .max_th = 64, .maxp_inv = 10, .wq_log2 = 9},
        [1][2] = {.min_th = 32, .max_th = 64, .maxp_inv = 10, .wq_log2 = 9},

        /* Traffic Class 2 - Colors Green / Yellow / Red */
        [2][0] = {.min_th = 48, .max_th = 64, .maxp_inv = 10, .wq_log2 = 9},
        [2][1] = {.min_th = 40, .max_th = 64, .maxp_inv = 10, .wq_log2 = 9},
        [2][2] = {.min_th = 32, .max_th = 64, .maxp_inv = 10, .wq_log2 = 9},

        /* Traffic Class 3 - Colors Green / Yellow / Red */
        [3][0] = {.min_th = 48, .max_th = 64, .maxp_inv = 10, .wq_log2 = 9},
        [3][1] = {.min_th = 40, .max_th = 64, .maxp_inv = 10, .wq_log2 = 9},
        [3][2] = {.min_th = 32, .max_th = 64, .maxp_inv = 10, .wq_log2 = 9}
    }
#endif /* RTE_SCHED_RED */
};

static struct rte_sched_port *
app_init_sched_port(uint32_t portid, uint32_t socketid)
{
    static char port_name[32]; /* static as referenced from global port_params*/
    struct rte_eth_link link;
    struct rte_sched_port *port = NULL;
    uint32_t pipe, subport;
    int err;

    rte_eth_link_get(portid, &link);

    port_params.socket = socketid;
    port_params.rate = (uint64_t) link.link_speed * 1000 * 1000 / 8;
    snprintf(port_name, sizeof(port_name), "port_%d", portid);
    port_params.name = port_name;

    port = rte_sched_port_config(&port_params);
    if (port == NULL){
        rte_exit(EXIT_FAILURE, "Unable to config sched port\n");
    }

    for (subport = 0; subport < port_params.n_subports_per_port; subport ++) {
        err = rte_sched_subport_config(port, subport, &subport_params[subport]);
        if (err) {
            rte_exit(EXIT_FAILURE, "Unable to config sched subport %u, err=%d\n",
                    subport, err);
        }

        for (pipe = 0; pipe < port_params.n_pipes_per_subport; pipe ++) {
            if (app_pipe_to_profile[subport][pipe] != -1) {
                err = rte_sched_pipe_config(port, subport, pipe,
                        app_pipe_to_profile[subport][pipe]);
                if (err) {
                    rte_exit(EXIT_FAILURE, "Unable to config sched pipe %u "
                            "for profile %d, err=%d\n", pipe,
                            app_pipe_to_profile[subport][pipe], err);
                }
            }
        }
    }

    return port;
}

static int
app_load_cfg_profile(const char *profile)
{
    if (profile == NULL)
        return 0;
    struct rte_cfgfile *file = rte_cfgfile_load(profile, 0);
    if (file == NULL)
        rte_exit(EXIT_FAILURE, "Cannot load configuration profile %s\n", profile);

    cfg_load_port(file, &port_params);
    cfg_load_subport(file, subport_params);
    cfg_load_pipe(file, pipe_profiles);

    rte_cfgfile_close(file);

    return 0;
}

int app_init(void)
{
    uint32_t i;
    char ring_name[MAX_NAME_LEN];
    char pool_name[MAX_NAME_LEN];

    if (rte_eth_dev_count_avail() == 0)
        rte_exit(EXIT_FAILURE, "No Ethernet port - bye\n");

    /* load configuration profile */
    if (app_load_cfg_profile(cfg_profile) != 0)
        rte_exit(EXIT_FAILURE, "Invalid configuration profile\n");

    /* Initialize each active flow */
    for(i = 0; i < nb_pfc; i++) {
        uint32_t socket = rte_lcore_to_socket_id(qos_conf[i].rx_core);
        struct rte_ring *ring;

        snprintf(ring_name, MAX_NAME_LEN, "ring-%u-%u", i, qos_conf[i].rx_core);
        ring = rte_ring_lookup(ring_name);
        if (ring == NULL)
            qos_conf[i].rx_ring = rte_ring_create(ring_name, ring_conf.ring_size,
                socket, RING_F_SP_ENQ | RING_F_SC_DEQ);
        else
            qos_conf[i].rx_ring = ring;

        snprintf(ring_name, MAX_NAME_LEN, "ring-%u-%u", i, qos_conf[i].tx_core);
        ring = rte_ring_lookup(ring_name);
        if (ring == NULL)
            qos_conf[i].tx_ring = rte_ring_create(ring_name, ring_conf.ring_size,
                socket, RING_F_SP_ENQ | RING_F_SC_DEQ);
        else
            qos_conf[i].tx_ring = ring;


        /* create the mbuf pools for each RX Port */
        snprintf(pool_name, MAX_NAME_LEN, "mbuf_pool%u", i);
        qos_conf[i].mbuf_pool = rte_pktmbuf_pool_create(pool_name,
            mp_size, burst_conf.rx_burst * 4, 0,
            RTE_MBUF_DEFAULT_BUF_SIZE,
            rte_eth_dev_socket_id(qos_conf[i].rx_port));
        if (qos_conf[i].mbuf_pool == NULL)
            rte_exit(EXIT_FAILURE, "Cannot init mbuf pool for socket %u\n", i);

        app_init_port(qos_conf[i].rx_port, qos_conf[i].mbuf_pool);
        app_init_port(qos_conf[i].tx_port, qos_conf[i].mbuf_pool);

        qos_conf[i].sched_port = app_init_sched_port(qos_conf[i].tx_port, socket);
    }

    RTE_LOG(INFO, APP, "time stamp clock running at %" PRIu64 " Hz\n",
             rte_get_timer_hz());

    RTE_LOG(INFO, APP, "Ring sizes: NIC RX = %u, Mempool = %d SW queue = %u,"
             "NIC TX = %u\n", ring_conf.rx_size, mp_size, ring_conf.ring_size,
             ring_conf.tx_size);

    RTE_LOG(INFO, APP, "Burst sizes: RX read = %hu, RX write = %hu,\n"
                          "             Worker read/QoS enqueue = %hu,\n"
                          "             QoS dequeue = %hu, Worker write = %hu\n",
        burst_conf.rx_burst, burst_conf.ring_burst, burst_conf.ring_burst,
        burst_conf.qos_dequeue, burst_conf.tx_burst);

    RTE_LOG(INFO, APP, "NIC thresholds RX (p = %hhu, h = %hhu, w = %hhu),"
                 "TX (p = %hhu, h = %hhu, w = %hhu)\n",
        rx_thresh.pthresh, rx_thresh.hthresh, rx_thresh.wthresh,
        tx_thresh.pthresh, tx_thresh.hthresh, tx_thresh.wthresh);

    return 0;
}