Testpmd Application User Guide
- 1. Introduction
- 2. Compiling the Application
- 3. Running the Application
- 4. Testpmd Runtime Functions
- 4.1. Help Functions
- 4.2. Command File Functions
- 4.3. Control Functions
- 4.4. Display Functions
- 4.5. Configuration Functions
- 4.5.1. set default
- 4.5.2. set verbose
- 4.5.3. set nbport
- 4.5.4. set nbcore
- 4.5.5. set coremask
- 4.5.6. set portmask
- 4.5.7. set burst
- 4.5.8. set txpkts
- 4.5.9. set txsplit
- 4.5.10. set corelist
- 4.5.11. set portlist
- 4.5.12. set tx loopback
- 4.5.13. set drop enable
- 4.5.14. set split drop enable (for VF)
- 4.5.15. set mac antispoof (for VF)
- 4.5.16. set macsec offload
- 4.5.17. set macsec sc
- 4.5.18. set macsec sa
- 4.5.19. set broadcast mode (for VF)
- 4.5.20. vlan set strip
- 4.5.21. vlan set stripq
- 4.5.22. vlan set stripq (for VF)
- 4.5.23. vlan set insert (for VF)
- 4.5.24. vlan set tag (for VF)
- 4.5.25. vlan set antispoof (for VF)
- 4.5.26. vlan set filter
- 4.5.27. vlan set qinq
- 4.5.28. vlan set tpid
- 4.5.29. rx_vlan add
- 4.5.30. rx_vlan rm
- 4.5.31. rx_vlan add (for VF)
- 4.5.32. rx_vlan rm (for VF)
- 4.5.33. tunnel_filter add
- 4.5.34. tunnel_filter remove
- 4.5.35. rx_vxlan_port add
- 4.5.36. rx_vxlan_port remove
- 4.5.37. tx_vlan set
- 4.5.38. tx_vlan set pvid
- 4.5.39. tx_vlan reset
- 4.5.40. csum set
- 4.5.41. csum parse-tunnel
- 4.5.42. csum show
- 4.5.43. tso set
- 4.5.44. tso show
- 4.5.45. gro
- 4.5.46. gro set
- 4.5.47. mac_addr add
- 4.5.48. mac_addr remove
- 4.5.49. mac_addr add (for VF)
- 4.5.50. mac_addr set
- 4.5.51. mac_addr set (for VF)
- 4.5.52. set port-uta
- 4.5.53. set promisc
- 4.5.54. set allmulti
- 4.5.55. set promisc (for VF)
- 4.5.56. set allmulticast (for VF)
- 4.5.57. set tx max bandwidth (for VF)
- 4.5.58. set tc tx min bandwidth (for VF)
- 4.5.59. set tc tx max bandwidth (for VF)
- 4.5.60. set tc strict link priority mode
- 4.5.61. set tc tx min bandwidth
- 4.5.62. set flow_ctrl rx
- 4.5.63. set pfc_ctrl rx
- 4.5.64. set stat_qmap
- 4.5.65. set port - rx/tx (for VF)
- 4.5.66. set port - mac address filter (for VF)
- 4.5.67. set port - rx mode(for VF)
- 4.5.68. set port - tx_rate (for Queue)
- 4.5.69. set port - tx_rate (for VF)
- 4.5.70. set port - mirror rule
- 4.5.71. reset port - mirror rule
- 4.5.72. set flush_rx
- 4.5.73. set bypass mode
- 4.5.74. set bypass event
- 4.5.75. set bypass timeout
- 4.5.76. show bypass config
- 4.5.77. set link up
- 4.5.78. set link down
- 4.5.79. E-tag set
- 4.5.80. ddp add
- 4.5.81. ddp del
- 4.5.82. ptype mapping
- 4.6. Port Functions
- 4.6.1. port attach
- 4.6.2. port detach
- 4.6.3. port start
- 4.6.4. port stop
- 4.6.5. port close
- 4.6.6. port start/stop queue
- 4.6.7. port config - speed
- 4.6.8. port config - queues/descriptors
- 4.6.9. port config - max-pkt-len
- 4.6.10. port config - CRC Strip
- 4.6.11. port config - scatter
- 4.6.12. port config - TX queue flags
- 4.6.13. port config - RX Checksum
- 4.6.14. port config - VLAN
- 4.6.15. port config - VLAN filter
- 4.6.16. port config - VLAN strip
- 4.6.17. port config - VLAN extend
- 4.6.18. port config - Drop Packets
- 4.6.19. port config - RSS
- 4.6.20. port config - RSS Reta
- 4.6.21. port config - DCB
- 4.6.22. port config - Burst
- 4.6.23. port config - Threshold
- 4.6.24. port config - E-tag
- 4.7. Link Bonding Functions
- 4.7.1. create bonded device
- 4.7.2. add bonding slave
- 4.7.3. remove bonding slave
- 4.7.4. set bonding mode
- 4.7.5. set bonding primary
- 4.7.6. set bonding mac
- 4.7.7. set bonding xmit_balance_policy
- 4.7.8. set bonding mon_period
- 4.7.9. set bonding lacp dedicated_queue
- 4.7.10. set bonding agg_mode
- 4.7.11. show bonding config
- 4.8. Register Functions
- 4.9. Filter Functions
- 4.9.1. ethertype_filter
- 4.9.2. 2tuple_filter
- 4.9.3. 5tuple_filter
- 4.9.4. syn_filter
- 4.9.5. flex_filter
- 4.9.6. flow_director_filter
- 4.9.7. flush_flow_director
- 4.9.8. flow_director_mask
- 4.9.9. flow_director_flex_mask
- 4.9.10. flow_director_flex_payload
- 4.9.11. get_sym_hash_ena_per_port
- 4.9.12. set_sym_hash_ena_per_port
- 4.9.13. get_hash_global_config
- 4.9.14. set_hash_global_config
- 4.9.15. set_hash_input_set
- 4.9.16. set_fdir_input_set
- 4.9.17. global_config
- 4.10. Flow rules management