DPDK
24.11.0-rc0
|
#include <rte_bbdev_op.h>
Data Fields | |
struct rte_bbdev_op_data | base_input |
struct rte_bbdev_op_data | base_output |
struct rte_bbdev_op_data | dewindowing_input |
struct rte_bbdev_op_data | power_meas_output |
uint32_t | op_flags |
uint16_t | input_sequence_size |
uint16_t | input_leading_padding |
uint16_t | output_sequence_size |
uint16_t | output_leading_depadding |
uint8_t | window_index [RTE_BBDEV_MAX_CS_2] |
uint16_t | cs_bitmap |
uint8_t | num_antennas_log2 |
uint8_t | idft_log2 |
uint8_t | dft_log2 |
int8_t | cs_time_adjustment |
int8_t | idft_shift |
int8_t | dft_shift |
uint16_t | ncs_reciprocal |
uint16_t | power_shift |
uint16_t | fp16_exp_adjust |
int8_t | freq_resample_mode |
uint16_t | output_depadded_size |
uint16_t | cs_theta_0 [RTE_BBDEV_MAX_CS] |
uint32_t | cs_theta_d [RTE_BBDEV_MAX_CS] |
Operation structure for FFT processing.
The operation processes the data for multiple antennas in a single call (i.e. for all the REs belonging to a given SRS sequence for instance).
The output mbuf data structure is expected to be allocated by the application with enough room for the output data.
Definition at line 765 of file rte_bbdev_op.h.
struct rte_bbdev_op_data base_input |
Input data starting from first antenna.
Definition at line 767 of file rte_bbdev_op.h.
struct rte_bbdev_op_data base_output |
Output data starting from first antenna and first cyclic shift.
Definition at line 769 of file rte_bbdev_op.h.
struct rte_bbdev_op_data dewindowing_input |
Optional frequency window input data.
Definition at line 771 of file rte_bbdev_op.h.
struct rte_bbdev_op_data power_meas_output |
Optional power measurement output data.
Definition at line 773 of file rte_bbdev_op.h.
uint32_t op_flags |
Flags from rte_bbdev_op_fft_flag_bitmasks.
Definition at line 775 of file rte_bbdev_op.h.
uint16_t input_sequence_size |
Input sequence size in 32-bits points.
Definition at line 777 of file rte_bbdev_op.h.
uint16_t input_leading_padding |
Padding at the start of the sequence.
Definition at line 779 of file rte_bbdev_op.h.
uint16_t output_sequence_size |
Output sequence size in 32-bits points.
Definition at line 781 of file rte_bbdev_op.h.
uint16_t output_leading_depadding |
Depadding at the start of the DFT output.
Definition at line 783 of file rte_bbdev_op.h.
uint8_t window_index[RTE_BBDEV_MAX_CS_2] |
Window index being used for each cyclic shift output.
Definition at line 785 of file rte_bbdev_op.h.
uint16_t cs_bitmap |
Bitmap of the cyclic shift output requested.
Definition at line 787 of file rte_bbdev_op.h.
uint8_t num_antennas_log2 |
Number of antennas as a log2 – 8 to 128.
Definition at line 789 of file rte_bbdev_op.h.
uint8_t idft_log2 |
iDFT size as a log2 - 32 to 2048.
Definition at line 791 of file rte_bbdev_op.h.
uint8_t dft_log2 |
DFT size as a log2 - 8 to 2048.
Definition at line 793 of file rte_bbdev_op.h.
int8_t cs_time_adjustment |
Adjustment of position of the cyclic shifts - -31 to 31.
Definition at line 795 of file rte_bbdev_op.h.
int8_t idft_shift |
iDFT shift down.
Definition at line 797 of file rte_bbdev_op.h.
int8_t dft_shift |
DFT shift down.
Definition at line 799 of file rte_bbdev_op.h.
uint16_t ncs_reciprocal |
NCS reciprocal factor.
Definition at line 801 of file rte_bbdev_op.h.
uint16_t power_shift |
Power measurement out shift down.
Definition at line 803 of file rte_bbdev_op.h.
uint16_t fp16_exp_adjust |
Adjust the FP6 exponent for INT<->FP16 conversion.
Definition at line 805 of file rte_bbdev_op.h.
int8_t freq_resample_mode |
Frequency resampling : 0: Transparent Mode1: 4/3 Resample2: 2/3 Resample.
Definition at line 807 of file rte_bbdev_op.h.
uint16_t output_depadded_size |
Output depadded size prior to frequency resampling.
Definition at line 809 of file rte_bbdev_op.h.
uint16_t cs_theta_0[RTE_BBDEV_MAX_CS] |
Time error correction initial phase.
Definition at line 811 of file rte_bbdev_op.h.
uint32_t cs_theta_d[RTE_BBDEV_MAX_CS] |
Time error correction phase increment.
Definition at line 813 of file rte_bbdev_op.h.