DPDK  24.07.0
Data Fields
rte_mtr_params Struct Reference

#include <rte_mtr.h>

Data Fields

uint32_t meter_profile_id
 
int use_prev_mtr_color
 
enum rte_colordscp_table
 
enum rte_colorvlan_table
 
int meter_enable
 
uint64_t stats_mask
 
uint32_t meter_policy_id
 
enum rte_color default_input_color
 

Detailed Description

Parameters for each traffic metering & policing object

See also
enum rte_mtr_stats_type

Definition at line 264 of file rte_mtr.h.

Field Documentation

◆ meter_profile_id

uint32_t meter_profile_id

Meter profile ID.

See also
rte_mtr_meter_profile_add()

Definition at line 266 of file rte_mtr.h.

◆ use_prev_mtr_color

int use_prev_mtr_color

Meter input color in case of MTR object chaining. When non-zero: if a previous MTR object is enabled in the same flow, then the color determined by the latest MTR object in the same flow is used as the input color by the current MTR object, otherwise the current MTR object uses the dscp_table to determine the input color. When zero: the color determined by any previous MTR object in same flow is ignored by the current MTR object, which uses the dscp_table to determine the input color.

Definition at line 277 of file rte_mtr.h.

◆ dscp_table

enum rte_color* dscp_table

Meter input color based on IP DSCP protocol field.

Valid when input_color_proto_mask set to any of the following RTE_MTR_COLOR_IN_PROTO_OUTER_IP, RTE_MTR_COLOR_IN_PROTO_INNER_IP

When non-NULL: it points to a pre-allocated and pre-populated table with exactly 64 elements providing the input color for each value of the IPv4/IPv6 Differentiated Services Code Point (DSCP) input packet field.

When NULL: it is equivalent to setting this parameter to an all-green populated table (i.e. table with all the 64 elements set to green color). The color blind mode is configured by setting use_prev_mtr_color to 0 and dscp_table to either NULL or to an all-green populated table.

When use_prev_mtr_color is non-zero value or when dscp_table contains at least one yellow or red color element, then the color aware mode is configured.

See also
enum rte_mtr_color_in_protocol::RTE_MTR_COLOR_IN_PROTO_OUTER_IP
enum rte_mtr_color_in_protocol::RTE_MTR_COLOR_IN_PROTO_INNER_IP
struct rte_mtr_params::input_color_proto_mask

Definition at line 304 of file rte_mtr.h.

◆ vlan_table

enum rte_color* vlan_table

Meter input color based on VLAN DEI(1bit), PCP(3 bits) protocol fields.

Valid when input_color_proto_mask set to any of the following RTE_MTR_COLOR_IN_PROTO_OUTER_VLAN, RTE_MTR_COLOR_IN_PROTO_INNER_VLAN

When non-NULL: it points to a pre-allocated and pre-populated table with exactly 16 elements providing the input color for each value of the DEI(1bit), PCP(3 bits) input packet field.

When NULL: it is equivalent to setting this parameter to an all-green populated table (i.e. table with all the 16 elements set to green color). The color blind mode is configured by setting use_prev_mtr_color to 0 and vlan_table to either NULL or to an all-green populated table.

When use_prev_mtr_color is non-zero value or when vlan_table contains at least one yellow or red color element, then the color aware mode is configured.

See also
enum rte_mtr_color_in_protocol::RTE_MTR_COLOR_IN_PROTO_OUTER_VLAN
enum rte_mtr_color_in_protocol::RTE_MTR_COLOR_IN_PROTO_INNER_VLAN
struct rte_mtr_params::input_color_proto_mask

Definition at line 330 of file rte_mtr.h.

◆ meter_enable

int meter_enable

Non-zero to enable the meter, zero to disable the meter at the time of MTR object creation. Ignored when the meter profile indicated by meter_profile_id is set to NONE.

See also
rte_mtr_meter_disable()

Definition at line 336 of file rte_mtr.h.

◆ stats_mask

uint64_t stats_mask

Set of stats counters to be enabled.

See also
enum rte_mtr_stats_type

Definition at line 341 of file rte_mtr.h.

◆ meter_policy_id

uint32_t meter_policy_id

Meter policy ID.

See also
rte_mtr_meter_policy_add()

Definition at line 344 of file rte_mtr.h.

◆ default_input_color

enum rte_color default_input_color

Input color to be set for the input packet when none of the enabled input color methods is applicable to the input packet. Ignored when this when input_color_proto_mask set to zero.

Definition at line 350 of file rte_mtr.h.


The documentation for this struct was generated from the following file: