rte_comp.h File Reference

#include <rte_mbuf.h>

Go to the source code of this file.

Data Structures
struct	rte_comp_deflate_params
struct	rte_comp_lz4_params
struct	rte_comp_compress_xform
struct	rte_comp_decompress_xform
struct	rte_comp_xform
struct	rte_comp_op

Macros
#define	RTE_COMP_FF_STATEFUL_COMPRESSION   (1ULL << 0)
#define	RTE_COMP_FF_STATEFUL_DECOMPRESSION   (1ULL << 1)
#define	RTE_COMP_FF_OOP_SGL_IN_SGL_OUT   (1ULL << 2)
#define	RTE_COMP_FF_OOP_SGL_IN_LB_OUT   (1ULL << 3)
#define	RTE_COMP_FF_OOP_LB_IN_SGL_OUT   (1ULL << 4)
#define	RTE_COMP_FF_ADLER32_CHECKSUM   (1ULL << 5)
#define	RTE_COMP_FF_CRC32_CHECKSUM   (1ULL << 6)
#define	RTE_COMP_FF_CRC32_ADLER32_CHECKSUM   (1ULL << 7)
#define	RTE_COMP_FF_MULTI_PKT_CHECKSUM   (1ULL << 8)
#define	RTE_COMP_FF_SHA1_HASH   (1ULL << 9)
#define	RTE_COMP_FF_SHA2_SHA256_HASH   (1ULL << 10)
#define	RTE_COMP_FF_NONCOMPRESSED_BLOCKS   (1ULL << 11)
#define	RTE_COMP_FF_SHAREABLE_PRIV_XFORM   (1ULL << 12)
#define	RTE_COMP_FF_HUFFMAN_FIXED   (1ULL << 13)
#define	RTE_COMP_FF_HUFFMAN_DYNAMIC   (1ULL << 14)
#define	RTE_COMP_FF_XXHASH32_CHECKSUM   (1ULL << 15)
#define	RTE_COMP_FF_LZ4_DICT_ID   (1ULL << 16)
#define	RTE_COMP_FF_LZ4_CONTENT_WITH_CHECKSUM   (1ULL << 17)
#define	RTE_COMP_FF_LZ4_CONTENT_SIZE   (1ULL << 18)
#define	RTE_COMP_FF_LZ4_BLOCK_INDEPENDENCE   (1ULL << 19)
#define	RTE_COMP_FF_LZ4_BLOCK_WITH_CHECKSUM   (1ULL << 20)
#define	RTE_COMP_LEVEL_NONE   (0)
#define	RTE_COMP_LEVEL_MIN   (1)
#define	RTE_COMP_LEVEL_MAX   (9)
#define	RTE_COMP_LZ4_FLAG_DICT_ID   (1 << 0)
#define	RTE_COMP_LZ4_FLAG_CONTENT_CHECKSUM   (1 << 2)
#define	RTE_COMP_LZ4_FLAG_CONTENT_SIZE   (1 << 3)
#define	RTE_COMP_LZ4_FLAG_BLOCK_CHECKSUM   (1 << 4)
#define	RTE_COMP_LZ4_FLAG_BLOCK_INDEPENDENCE   (1 << 5)

Enumerations
enum	rte_comp_op_status {   RTE_COMP_OP_STATUS_SUCCESS = 0, RTE_COMP_OP_STATUS_NOT_PROCESSED, RTE_COMP_OP_STATUS_INVALID_ARGS, RTE_COMP_OP_STATUS_ERROR,   RTE_COMP_OP_STATUS_INVALID_STATE, RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED, RTE_COMP_OP_STATUS_OUT_OF_SPACE_RECOVERABLE }
enum	rte_comp_algorithm { , RTE_COMP_ALGO_NULL, RTE_COMP_ALGO_DEFLATE, RTE_COMP_ALGO_LZS, RTE_COMP_ALGO_LZ4 }
enum	rte_comp_hash_algorithm { RTE_COMP_HASH_ALGO_NONE = 0, RTE_COMP_HASH_ALGO_SHA1, RTE_COMP_HASH_ALGO_SHA2_256 }
enum	rte_comp_checksum_type {   RTE_COMP_CHECKSUM_NONE, RTE_COMP_CHECKSUM_CRC32, RTE_COMP_CHECKSUM_ADLER32, RTE_COMP_CHECKSUM_CRC32_ADLER32,   RTE_COMP_CHECKSUM_XXHASH32 }
enum	rte_comp_huffman { RTE_COMP_HUFFMAN_DEFAULT, RTE_COMP_HUFFMAN_FIXED, RTE_COMP_HUFFMAN_DYNAMIC }
enum	rte_comp_flush_flag { RTE_COMP_FLUSH_NONE, RTE_COMP_FLUSH_SYNC, RTE_COMP_FLUSH_FULL, RTE_COMP_FLUSH_FINAL }
enum	rte_comp_xform_type { RTE_COMP_COMPRESS, RTE_COMP_DECOMPRESS }
enum	rte_comp_op_type { RTE_COMP_OP_STATELESS, RTE_COMP_OP_STATEFUL }

Functions
struct rte_mempool *	rte_comp_op_pool_create (const char *name, unsigned int nb_elts, unsigned int cache_size, uint16_t user_size, int socket_id)
struct rte_comp_op *	rte_comp_op_alloc (struct rte_mempool *mempool)
int	rte_comp_op_bulk_alloc (struct rte_mempool *mempool, struct rte_comp_op **ops, uint16_t nb_ops)
void	rte_comp_op_free (struct rte_comp_op *op)
void	rte_comp_op_bulk_free (struct rte_comp_op **ops, uint16_t nb_ops)
const char *	rte_comp_get_feature_name (uint64_t flag)

Detailed Description

RTE definitions for Data Compression Service

Definition in file rte_comp.h.

Macro Definition Documentation

RTE_COMP_FF_STATEFUL_COMPRESSION

#define RTE_COMP_FF_STATEFUL_COMPRESSION   (1ULL << 0)

compression service feature flags

Note

New features flags should be added to the end of the list

Keep these flags synchronised with rte_comp_get_feature_name()Stateful compression is supported

Definition at line 27 of file rte_comp.h.

RTE_COMP_FF_STATEFUL_DECOMPRESSION

#define RTE_COMP_FF_STATEFUL_DECOMPRESSION   (1ULL << 1)

Stateful decompression is supported

Definition at line 29 of file rte_comp.h.

RTE_COMP_FF_OOP_SGL_IN_SGL_OUT

#define RTE_COMP_FF_OOP_SGL_IN_SGL_OUT   (1ULL << 2)

Out-of-place Scatter-gather (SGL) buffers, with multiple segments, are supported in input and output

Definition at line 31 of file rte_comp.h.

RTE_COMP_FF_OOP_SGL_IN_LB_OUT

#define RTE_COMP_FF_OOP_SGL_IN_LB_OUT   (1ULL << 3)

Out-of-place Scatter-gather (SGL) buffers are supported in input, combined with linear buffers (LB), with a single segment, in output

Definition at line 35 of file rte_comp.h.

RTE_COMP_FF_OOP_LB_IN_SGL_OUT

#define RTE_COMP_FF_OOP_LB_IN_SGL_OUT   (1ULL << 4)

Out-of-place Scatter-gather (SGL) buffers are supported in output, combined with linear buffers (LB) in input

Definition at line 40 of file rte_comp.h.

RTE_COMP_FF_ADLER32_CHECKSUM

#define RTE_COMP_FF_ADLER32_CHECKSUM   (1ULL << 5)

Adler-32 Checksum is supported

Definition at line 44 of file rte_comp.h.

RTE_COMP_FF_CRC32_CHECKSUM

#define RTE_COMP_FF_CRC32_CHECKSUM   (1ULL << 6)

CRC32 Checksum is supported

Definition at line 46 of file rte_comp.h.

RTE_COMP_FF_CRC32_ADLER32_CHECKSUM

#define RTE_COMP_FF_CRC32_ADLER32_CHECKSUM   (1ULL << 7)

Adler-32/CRC32 Checksum is supported

Definition at line 48 of file rte_comp.h.

RTE_COMP_FF_MULTI_PKT_CHECKSUM

#define RTE_COMP_FF_MULTI_PKT_CHECKSUM   (1ULL << 8)

Generation of checksum across multiple stateless packets is supported

Definition at line 50 of file rte_comp.h.

RTE_COMP_FF_SHA1_HASH

#define RTE_COMP_FF_SHA1_HASH   (1ULL << 9)

SHA1 Hash is supported

Definition at line 52 of file rte_comp.h.

RTE_COMP_FF_SHA2_SHA256_HASH

#define RTE_COMP_FF_SHA2_SHA256_HASH   (1ULL << 10)

SHA256 Hash of SHA2 family is supported

Definition at line 54 of file rte_comp.h.

RTE_COMP_FF_NONCOMPRESSED_BLOCKS

#define RTE_COMP_FF_NONCOMPRESSED_BLOCKS   (1ULL << 11)

Creation of non-compressed blocks using RTE_COMP_LEVEL_NONE is supported

Definition at line 56 of file rte_comp.h.

RTE_COMP_FF_SHAREABLE_PRIV_XFORM

#define RTE_COMP_FF_SHAREABLE_PRIV_XFORM   (1ULL << 12)

Private xforms created by the PMD can be shared across multiple stateless operations. If not set, then app needs to create as many priv_xforms as it expects to have stateless operations in-flight.

Definition at line 58 of file rte_comp.h.

RTE_COMP_FF_HUFFMAN_FIXED

#define RTE_COMP_FF_HUFFMAN_FIXED   (1ULL << 13)

Fixed huffman encoding is supported

Definition at line 64 of file rte_comp.h.

RTE_COMP_FF_HUFFMAN_DYNAMIC

#define RTE_COMP_FF_HUFFMAN_DYNAMIC   (1ULL << 14)

Dynamic huffman encoding is supported

Definition at line 66 of file rte_comp.h.

RTE_COMP_FF_XXHASH32_CHECKSUM

#define RTE_COMP_FF_XXHASH32_CHECKSUM   (1ULL << 15)

xxHash-32 Checksum is supported

Definition at line 68 of file rte_comp.h.

RTE_COMP_FF_LZ4_DICT_ID

#define RTE_COMP_FF_LZ4_DICT_ID   (1ULL << 16)

LZ4 dictionary ID is supported

Definition at line 70 of file rte_comp.h.

RTE_COMP_FF_LZ4_CONTENT_WITH_CHECKSUM

#define RTE_COMP_FF_LZ4_CONTENT_WITH_CHECKSUM   (1ULL << 17)

LZ4 content with checksum is supported

Definition at line 72 of file rte_comp.h.

RTE_COMP_FF_LZ4_CONTENT_SIZE

#define RTE_COMP_FF_LZ4_CONTENT_SIZE   (1ULL << 18)

LZ4 content size is supported

Definition at line 74 of file rte_comp.h.

RTE_COMP_FF_LZ4_BLOCK_INDEPENDENCE

#define RTE_COMP_FF_LZ4_BLOCK_INDEPENDENCE   (1ULL << 19)

LZ4 block independent is supported

Definition at line 76 of file rte_comp.h.

RTE_COMP_FF_LZ4_BLOCK_WITH_CHECKSUM

#define RTE_COMP_FF_LZ4_BLOCK_WITH_CHECKSUM   (1ULL << 20)

LZ4 block with checksum is supported

Definition at line 78 of file rte_comp.h.

RTE_COMP_LEVEL_NONE

#define RTE_COMP_LEVEL_NONE   (0)

Use PMD Default

Definition at line 145 of file rte_comp.h.

RTE_COMP_LEVEL_MIN

#define RTE_COMP_LEVEL_MIN   (1)

Output uncompressed blocks if supported by the specified algorithm

Definition at line 147 of file rte_comp.h.

RTE_COMP_LEVEL_MAX

#define RTE_COMP_LEVEL_MAX   (9)

Use minimum compression level supported by the PMD

Definition at line 149 of file rte_comp.h.

RTE_COMP_LZ4_FLAG_DICT_ID

#define RTE_COMP_LZ4_FLAG_DICT_ID   (1 << 0)

Dictionary ID flag If this flag is set, a 4-byte dict-ID field will be present, after the descriptor flags and the content size.

Definition at line 237 of file rte_comp.h.

RTE_COMP_LZ4_FLAG_CONTENT_CHECKSUM

#define RTE_COMP_LZ4_FLAG_CONTENT_CHECKSUM   (1 << 2)

Content checksum flag If this flag is set, a 32-bit content checksum will be appended after the end mark.

Definition at line 244 of file rte_comp.h.

RTE_COMP_LZ4_FLAG_CONTENT_SIZE

#define RTE_COMP_LZ4_FLAG_CONTENT_SIZE   (1 << 3)

Content size flag If this flag is set, the uncompressed size of data included within the frame will be present as an 8-byte unsigned little-endian value, after the flags. Content size usage is optional.

Definition at line 252 of file rte_comp.h.

RTE_COMP_LZ4_FLAG_BLOCK_CHECKSUM

#define RTE_COMP_LZ4_FLAG_BLOCK_CHECKSUM   (1 << 4)

Block checksum flag. If this flag is set, each data block will be followed by a 4-byte checksum, calculated with the xxHash-32 algorithm on the raw (compressed) data block. The intent is to detect data corruption (storage or transmission errors) immediately, before decoding. Block checksum usage is optional.

Definition at line 262 of file rte_comp.h.

RTE_COMP_LZ4_FLAG_BLOCK_INDEPENDENCE

#define RTE_COMP_LZ4_FLAG_BLOCK_INDEPENDENCE   (1 << 5)

Block independence flag. If this flag is set to 1, blocks are independent. If this flag is set to 0, each block depends on previous ones (up to LZ4 window size, which is 64 KB). In such case, it is necessary to decode all blocks in sequence. Block dependency improves compression ratio, especially for small blocks. On the other hand, it makes random access or multi-threaded decoding impossible.

Definition at line 273 of file rte_comp.h.

Enumeration Type Documentation

rte_comp_op_status

enum rte_comp_op_status

Status of comp operation

Enumerator
RTE_COMP_OP_STATUS_SUCCESS	Operation completed successfully
RTE_COMP_OP_STATUS_NOT_PROCESSED	Operation has not yet been processed by the device
RTE_COMP_OP_STATUS_INVALID_ARGS	Operation failed due to invalid arguments in request
RTE_COMP_OP_STATUS_ERROR	Error handling operation
RTE_COMP_OP_STATUS_INVALID_STATE	Operation is invoked in invalid state
RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED	Output buffer ran out of space before operation completed. Error case. Application must resubmit all data with a larger output buffer.
RTE_COMP_OP_STATUS_OUT_OF_SPACE_RECOVERABLE	Output buffer ran out of space before operation completed, but this is not an error case. Output data up to op.produced can be used and next op in the stream should continue on from op.consumed+1.

Definition at line 82 of file rte_comp.h.

rte_comp_algorithm

enum rte_comp_algorithm

Compression Algorithms

Enumerator
RTE_COMP_ALGO_NULL	No Compression algorithm No compression. Pass-through, data is copied unchanged from source buffer to destination buffer.
RTE_COMP_ALGO_DEFLATE	DEFLATE compression algorithm https://tools.ietf.org/html/rfc1951
RTE_COMP_ALGO_LZS	LZS compression algorithm https://tools.ietf.org/html/rfc2395
RTE_COMP_ALGO_LZ4	LZ4 compression algorithm https://github.com/lz4/lz4

Definition at line 106 of file rte_comp.h.

rte_comp_hash_algorithm

enum rte_comp_hash_algorithm

Compression Hash Algorithms

Enumerator
RTE_COMP_HASH_ALGO_NONE	No hash
RTE_COMP_HASH_ALGO_SHA1	SHA1 hash algorithm
RTE_COMP_HASH_ALGO_SHA2_256	SHA256 hash algorithm of SHA2 family

Definition at line 129 of file rte_comp.h.

rte_comp_checksum_type

enum rte_comp_checksum_type

Use maximum compression level supported by the PMD Compression checksum types

Enumerator
RTE_COMP_CHECKSUM_NONE	No checksum generated
RTE_COMP_CHECKSUM_CRC32	Generates a CRC32 checksum, as used by gzip
RTE_COMP_CHECKSUM_ADLER32	Generates an Adler-32 checksum, as used by zlib
RTE_COMP_CHECKSUM_CRC32_ADLER32	Generates both Adler-32 and CRC32 checksums, concatenated. CRC32 is in the lower 32bits, Adler-32 in the upper 32 bits.
RTE_COMP_CHECKSUM_XXHASH32	Generates a xxHash-32 checksum, as used by LZ4. https://github.com/Cyan4973/xxHash/blob/dev/doc/xxhash_spec.md

Definition at line 153 of file rte_comp.h.

rte_comp_huffman

enum rte_comp_huffman

Compression Huffman Type - used by DEFLATE algorithm

Enumerator
RTE_COMP_HUFFMAN_DEFAULT	PMD may choose which Huffman codes to use
RTE_COMP_HUFFMAN_FIXED	Use Fixed Huffman codes
RTE_COMP_HUFFMAN_DYNAMIC	Use Dynamic Huffman codes

Definition at line 171 of file rte_comp.h.

rte_comp_flush_flag

enum rte_comp_flush_flag

Compression flush flags

Enumerator
RTE_COMP_FLUSH_NONE	Data is not flushed. Output may remain in the compressor and be processed during a following op. It may not be possible to decompress output until a later op with some other flush flag has been sent.
RTE_COMP_FLUSH_SYNC	All data should be flushed to output buffer. Output data can be decompressed. However state and history is not cleared, so future operations may use history from this operation.
RTE_COMP_FLUSH_FULL	All data should be flushed to output buffer. Output data can be decompressed. State and history data is cleared, so future ops will be independent of ops processed before this.
RTE_COMP_FLUSH_FINAL	Same as RTE_COMP_FLUSH_FULL but if op.algo is RTE_COMP_ALGO_DEFLATE then bfinal bit is set in the last block.

Definition at line 181 of file rte_comp.h.

rte_comp_xform_type

enum rte_comp_xform_type

Compression transform types

Enumerator
RTE_COMP_COMPRESS	Compression service - compress
RTE_COMP_DECOMPRESS	Compression service - decompress

Definition at line 204 of file rte_comp.h.

rte_comp_op_type

enum rte_comp_op_type

Compression operation type

Enumerator
RTE_COMP_OP_STATELESS	All data to be processed is submitted in the op, no state or history from previous ops is used and none will be stored for future ops. Flush flag must be set to either FLUSH_FULL or FLUSH_FINAL.
RTE_COMP_OP_STATEFUL	There may be more data to be processed after this op, it's part of a stream of data. State and history from previous ops can be used and resulting state and history can be stored for future ops, depending on flush flag.

Definition at line 212 of file rte_comp.h.

Function Documentation

rte_comp_op_pool_create()

struct rte_mempool* rte_comp_op_pool_create	(	const char *	name,
		unsigned int	nb_elts,
		unsigned int	cache_size,
		uint16_t	user_size,
		int	socket_id
	)

Creates an operation pool

Parameters

name	Compress pool name
nb_elts	Number of elements in pool
cache_size	Number of elements to cache on lcore, see rte_mempool_create for further details about cache size
user_size	Size of private data to allocate for user with each operation
socket_id	Socket to identifier allocate memory on

Returns

• On success pointer to mempool
• On failure NULL

rte_comp_op_alloc()

struct rte_comp_op* rte_comp_op_alloc

(

struct rte_mempool *

mempool

)

Allocate an operation from a mempool with default parameters set

Parameters

mempool

Compress operation mempool

Returns

• On success returns a valid rte_comp_op structure
• On failure returns NULL

rte_comp_op_bulk_alloc()

int rte_comp_op_bulk_alloc	(	struct rte_mempool *	mempool,
		struct rte_comp_op **	ops,
		uint16_t	nb_ops
	)

Bulk allocate operations from a mempool with default parameters set

Parameters

mempool	Compress operation mempool
ops	Array to place allocated operations
nb_ops	Number of operations to allocate

Returns

• nb_ops: Success, the nb_ops requested was allocated
• 0: Not enough entries in the mempool; no ops are retrieved.

rte_comp_op_free()

void rte_comp_op_free

(

struct rte_comp_op *

op

)

Free operation structure If operation has been allocate from a rte_mempool, then the operation will be returned to the mempool.

Parameters

op	Compress operation pointer allocated from rte_comp_op_alloc() If op is NULL, no operation is performed.

rte_comp_op_bulk_free()

void rte_comp_op_bulk_free	(	struct rte_comp_op **	ops,
		uint16_t	nb_ops
	)

Bulk free operation structures If operations have been allocated from an rte_mempool, then the operations will be returned to the mempool. The array entry will be cleared.

Parameters

ops	Array of Compress operations
nb_ops	Number of operations to free

rte_comp_get_feature_name()

const char* rte_comp_get_feature_name

(

uint64_t

flag

)

Get the name of a compress service feature flag

Parameters

flag	The mask describing the flag

Returns

The name of this flag, or NULL if it's not a valid feature flag.