|
DPDK 22.11.7
|
Go to the source code of this file.
Data Structures | |
| struct | rte_tm_node_stats |
| struct | rte_tm_capabilities |
| struct | rte_tm_level_capabilities |
| struct | rte_tm_node_capabilities |
| struct | rte_tm_red_params |
| struct | rte_tm_wred_params |
| struct | rte_tm_token_bucket |
| struct | rte_tm_shaper_params |
| struct | rte_tm_node_params |
| struct | rte_tm_error |
Macros | |
| #define | RTE_TM_ETH_FRAMING_OVERHEAD 20 |
| #define | RTE_TM_ETH_FRAMING_OVERHEAD_FCS 24 |
| #define | RTE_TM_WRED_PROFILE_ID_NONE UINT32_MAX |
| #define | RTE_TM_SHAPER_PROFILE_ID_NONE UINT32_MAX |
| #define | RTE_TM_NODE_ID_NULL UINT32_MAX |
| #define | RTE_TM_NODE_LEVEL_ID_ANY UINT32_MAX |
Enumerations | |
| enum | rte_tm_stats_type { RTE_TM_STATS_N_PKTS = 1 << 0 , RTE_TM_STATS_N_BYTES = 1 << 1 , RTE_TM_STATS_N_PKTS_GREEN_DROPPED = 1 << 2 , RTE_TM_STATS_N_PKTS_YELLOW_DROPPED = 1 << 3 , RTE_TM_STATS_N_PKTS_RED_DROPPED = 1 << 4 , RTE_TM_STATS_N_BYTES_GREEN_DROPPED = 1 << 5 , RTE_TM_STATS_N_BYTES_YELLOW_DROPPED = 1 << 6 , RTE_TM_STATS_N_BYTES_RED_DROPPED = 1 << 7 , RTE_TM_STATS_N_PKTS_QUEUED = 1 << 8 , RTE_TM_STATS_N_BYTES_QUEUED = 1 << 9 } |
| enum | rte_tm_dynamic_update_type { RTE_TM_UPDATE_NODE_PARENT_KEEP_LEVEL = 1 << 0 , RTE_TM_UPDATE_NODE_PARENT_CHANGE_LEVEL = 1 << 1 , RTE_TM_UPDATE_NODE_ADD_DELETE = 1 << 2 , RTE_TM_UPDATE_NODE_SUSPEND_RESUME = 1 << 3 , RTE_TM_UPDATE_NODE_WFQ_WEIGHT_MODE = 1 << 4 , RTE_TM_UPDATE_NODE_N_SP_PRIORITIES = 1 << 5 , RTE_TM_UPDATE_NODE_CMAN = 1 << 6 , RTE_TM_UPDATE_NODE_STATS = 1 << 7 } |
| enum | rte_tm_cman_mode { RTE_TM_CMAN_TAIL_DROP = 0 , RTE_TM_CMAN_HEAD_DROP , RTE_TM_CMAN_WRED } |
| enum | rte_tm_error_type { RTE_TM_ERROR_TYPE_NONE , RTE_TM_ERROR_TYPE_UNSPECIFIED , RTE_TM_ERROR_TYPE_CAPABILITIES , RTE_TM_ERROR_TYPE_LEVEL_ID , RTE_TM_ERROR_TYPE_WRED_PROFILE , RTE_TM_ERROR_TYPE_WRED_PROFILE_GREEN , RTE_TM_ERROR_TYPE_WRED_PROFILE_YELLOW , RTE_TM_ERROR_TYPE_WRED_PROFILE_RED , RTE_TM_ERROR_TYPE_WRED_PROFILE_ID , RTE_TM_ERROR_TYPE_SHARED_WRED_CONTEXT_ID , RTE_TM_ERROR_TYPE_SHAPER_PROFILE , RTE_TM_ERROR_TYPE_SHAPER_PROFILE_COMMITTED_RATE , RTE_TM_ERROR_TYPE_SHAPER_PROFILE_COMMITTED_SIZE , RTE_TM_ERROR_TYPE_SHAPER_PROFILE_PEAK_RATE , RTE_TM_ERROR_TYPE_SHAPER_PROFILE_PEAK_SIZE , RTE_TM_ERROR_TYPE_SHAPER_PROFILE_PKT_ADJUST_LEN , RTE_TM_ERROR_TYPE_SHAPER_PROFILE_PACKET_MODE , RTE_TM_ERROR_TYPE_SHAPER_PROFILE_ID , RTE_TM_ERROR_TYPE_SHARED_SHAPER_ID , RTE_TM_ERROR_TYPE_NODE_PARENT_NODE_ID , RTE_TM_ERROR_TYPE_NODE_PRIORITY , RTE_TM_ERROR_TYPE_NODE_WEIGHT , RTE_TM_ERROR_TYPE_NODE_PARAMS , RTE_TM_ERROR_TYPE_NODE_PARAMS_SHAPER_PROFILE_ID , RTE_TM_ERROR_TYPE_NODE_PARAMS_SHARED_SHAPER_ID , RTE_TM_ERROR_TYPE_NODE_PARAMS_N_SHARED_SHAPERS , RTE_TM_ERROR_TYPE_NODE_PARAMS_WFQ_WEIGHT_MODE , RTE_TM_ERROR_TYPE_NODE_PARAMS_N_SP_PRIORITIES , RTE_TM_ERROR_TYPE_NODE_PARAMS_CMAN , RTE_TM_ERROR_TYPE_NODE_PARAMS_WRED_PROFILE_ID , RTE_TM_ERROR_TYPE_NODE_PARAMS_SHARED_WRED_CONTEXT_ID , RTE_TM_ERROR_TYPE_NODE_PARAMS_N_SHARED_WRED_CONTEXTS , RTE_TM_ERROR_TYPE_NODE_PARAMS_STATS , RTE_TM_ERROR_TYPE_NODE_ID } |
Functions | |
| __rte_experimental int | rte_tm_get_number_of_leaf_nodes (uint16_t port_id, uint32_t *n_leaf_nodes, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_node_type_get (uint16_t port_id, uint32_t node_id, int *is_leaf, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_capabilities_get (uint16_t port_id, struct rte_tm_capabilities *cap, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_level_capabilities_get (uint16_t port_id, uint32_t level_id, struct rte_tm_level_capabilities *cap, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_node_capabilities_get (uint16_t port_id, uint32_t node_id, struct rte_tm_node_capabilities *cap, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_wred_profile_add (uint16_t port_id, uint32_t wred_profile_id, struct rte_tm_wred_params *profile, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_wred_profile_delete (uint16_t port_id, uint32_t wred_profile_id, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_shared_wred_context_add_update (uint16_t port_id, uint32_t shared_wred_context_id, uint32_t wred_profile_id, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_shared_wred_context_delete (uint16_t port_id, uint32_t shared_wred_context_id, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_shaper_profile_add (uint16_t port_id, uint32_t shaper_profile_id, struct rte_tm_shaper_params *profile, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_shaper_profile_delete (uint16_t port_id, uint32_t shaper_profile_id, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_shared_shaper_add_update (uint16_t port_id, uint32_t shared_shaper_id, uint32_t shaper_profile_id, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_shared_shaper_delete (uint16_t port_id, uint32_t shared_shaper_id, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_node_add (uint16_t port_id, uint32_t node_id, uint32_t parent_node_id, uint32_t priority, uint32_t weight, uint32_t level_id, struct rte_tm_node_params *params, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_node_delete (uint16_t port_id, uint32_t node_id, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_node_suspend (uint16_t port_id, uint32_t node_id, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_node_resume (uint16_t port_id, uint32_t node_id, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_hierarchy_commit (uint16_t port_id, int clear_on_fail, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_node_parent_update (uint16_t port_id, uint32_t node_id, uint32_t parent_node_id, uint32_t priority, uint32_t weight, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_node_shaper_update (uint16_t port_id, uint32_t node_id, uint32_t shaper_profile_id, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_node_shared_shaper_update (uint16_t port_id, uint32_t node_id, uint32_t shared_shaper_id, int add, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_node_stats_update (uint16_t port_id, uint32_t node_id, uint64_t stats_mask, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_node_wfq_weight_mode_update (uint16_t port_id, uint32_t node_id, int *wfq_weight_mode, uint32_t n_sp_priorities, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_node_cman_update (uint16_t port_id, uint32_t node_id, enum rte_tm_cman_mode cman, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_node_wred_context_update (uint16_t port_id, uint32_t node_id, uint32_t wred_profile_id, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_node_shared_wred_context_update (uint16_t port_id, uint32_t node_id, uint32_t shared_wred_context_id, int add, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_node_stats_read (uint16_t port_id, uint32_t node_id, struct rte_tm_node_stats *stats, uint64_t *stats_mask, int clear, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_mark_vlan_dei (uint16_t port_id, int mark_green, int mark_yellow, int mark_red, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_mark_ip_ecn (uint16_t port_id, int mark_green, int mark_yellow, int mark_red, struct rte_tm_error *error) |
| __rte_experimental int | rte_tm_mark_ip_dscp (uint16_t port_id, int mark_green, int mark_yellow, int mark_red, struct rte_tm_error *error) |
RTE Generic Traffic Manager API
This interface provides the ability to configure the traffic manager in a generic way. It includes features such as: hierarchical scheduling, traffic shaping, congestion management, packet marking, etc.
Definition in file rte_tm.h.
| #define RTE_TM_ETH_FRAMING_OVERHEAD 20 |
Ethernet framing overhead.
Overhead fields per Ethernet frame:
One of the typical values for the pkt_length_adjust field of the shaper profile.
| #define RTE_TM_ETH_FRAMING_OVERHEAD_FCS 24 |
Ethernet framing overhead including the Frame Check Sequence (FCS) field. Useful when FCS is generated and added at the end of the Ethernet frame on Tx side without any SW intervention.
One of the typical values for the pkt_length_adjust field of the shaper profile.
| #define RTE_TM_WRED_PROFILE_ID_NONE UINT32_MAX |
Invalid WRED profile ID.
| #define RTE_TM_SHAPER_PROFILE_ID_NONE UINT32_MAX |
Invalid shaper profile ID.
| #define RTE_TM_NODE_ID_NULL UINT32_MAX |
Node ID for the parent of the root node.
| #define RTE_TM_NODE_LEVEL_ID_ANY UINT32_MAX |
Node level ID used to disable level ID checking.
| enum rte_tm_stats_type |
Node statistics counter type
Traffic manager dynamic updates
| enum rte_tm_cman_mode |
Congestion management (CMAN) mode
This is used for controlling the admission of packets into a packet queue or group of packet queues on congestion. On request of writing a new packet into the current queue while the queue is full, the tail drop algorithm drops the new packet while leaving the queue unmodified, as opposed to head drop algorithm, which drops the packet at the head of the queue (the oldest packet waiting in the queue) and admits the new packet at the tail of the queue.
The Random Early Detection (RED) algorithm works by proactively dropping more and more input packets as the queue occupancy builds up. When the queue is full or almost full, RED effectively works as tail drop. The Weighted RED algorithm uses a separate set of RED thresholds for each packet color.
| Enumerator | |
|---|---|
| RTE_TM_CMAN_TAIL_DROP | Tail drop |
| RTE_TM_CMAN_HEAD_DROP | Head drop |
| RTE_TM_CMAN_WRED | Weighted Random Early Detection (WRED) |
| enum rte_tm_error_type |
Verbose error types.
Most of them provide the type of the object referenced by struct rte_tm_error::cause.
| Enumerator | |
|---|---|
| RTE_TM_ERROR_TYPE_NONE | No error. |
| RTE_TM_ERROR_TYPE_UNSPECIFIED | Cause unspecified. |
| __rte_experimental int rte_tm_get_number_of_leaf_nodes | ( | uint16_t | port_id, |
| uint32_t * | n_leaf_nodes, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager get number of leaf nodes
Each leaf node sits on top of a Tx queue of the current Ethernet port. Therefore, the set of leaf nodes is predefined, their number is always equal to N (where N is the number of Tx queues configured for the current port) and their IDs are 0 .. (N-1).
| [in] | port_id | The port identifier of the Ethernet device. |
| [out] | n_leaf_nodes | Number of leaf nodes for the current port. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_node_type_get | ( | uint16_t | port_id, |
| uint32_t | node_id, | ||
| int * | is_leaf, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager node ID validate and type (i.e. leaf or non-leaf) get
The leaf nodes have predefined IDs in the range of 0 .. (N-1), where N is the number of Tx queues of the current Ethernet port. The non-leaf nodes have their IDs generated by the application outside of the above range, which is reserved for leaf nodes.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | node_id | Node ID value. Needs to be valid. |
| [out] | is_leaf | Set to non-zero value when node is leaf and to zero otherwise (non-leaf). |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_capabilities_get | ( | uint16_t | port_id, |
| struct rte_tm_capabilities * | cap, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager capabilities get
| [in] | port_id | The port identifier of the Ethernet device. |
| [out] | cap | Traffic manager capabilities. Needs to be pre-allocated and valid. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_level_capabilities_get | ( | uint16_t | port_id, |
| uint32_t | level_id, | ||
| struct rte_tm_level_capabilities * | cap, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager level capabilities get
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | level_id | The hierarchy level identifier. The value of 0 identifies the level of the root node. |
| [out] | cap | Traffic manager level capabilities. Needs to be pre-allocated and valid. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_node_capabilities_get | ( | uint16_t | port_id, |
| uint32_t | node_id, | ||
| struct rte_tm_node_capabilities * | cap, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager node capabilities get
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | node_id | Node ID. Needs to be valid. |
| [out] | cap | Traffic manager node capabilities. Needs to be pre-allocated and valid. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_wred_profile_add | ( | uint16_t | port_id, |
| uint32_t | wred_profile_id, | ||
| struct rte_tm_wred_params * | profile, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager WRED profile add
Create a new WRED profile with ID set to wred_profile_id. The new profile is used to create one or several WRED contexts.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | wred_profile_id | WRED profile ID for the new profile. Needs to be unused. |
| [in] | profile | WRED profile parameters. Needs to be pre-allocated and valid. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_wred_profile_delete | ( | uint16_t | port_id, |
| uint32_t | wred_profile_id, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager WRED profile delete
Delete an existing WRED profile. This operation fails when there is currently at least one user (i.e. WRED context) of this WRED profile.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | wred_profile_id | WRED profile ID. Needs to be the valid. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_shared_wred_context_add_update | ( | uint16_t | port_id, |
| uint32_t | shared_wred_context_id, | ||
| uint32_t | wred_profile_id, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager shared WRED context add or update
When shared_wred_context_id is invalid, a new WRED context with this ID is created by using the WRED profile identified by wred_profile_id.
When shared_wred_context_id is valid, this WRED context is no longer using the profile previously assigned to it and is updated to use the profile identified by wred_profile_id.
A valid shared WRED context can be assigned to several hierarchy leaf nodes configured to use WRED as the congestion management mode.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | shared_wred_context_id | Shared WRED context ID |
| [in] | wred_profile_id | WRED profile ID. Needs to be the valid. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_shared_wred_context_delete | ( | uint16_t | port_id, |
| uint32_t | shared_wred_context_id, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager shared WRED context delete
Delete an existing shared WRED context. This operation fails when there is currently at least one user (i.e. hierarchy leaf node) of this shared WRED context.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | shared_wred_context_id | Shared WRED context ID. Needs to be the valid. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_shaper_profile_add | ( | uint16_t | port_id, |
| uint32_t | shaper_profile_id, | ||
| struct rte_tm_shaper_params * | profile, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager shaper profile add
Create a new shaper profile with ID set to shaper_profile_id. The new shaper profile is used to create one or several shapers.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | shaper_profile_id | Shaper profile ID for the new profile. Needs to be unused. |
| [in] | profile | Shaper profile parameters. Needs to be pre-allocated and valid. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_shaper_profile_delete | ( | uint16_t | port_id, |
| uint32_t | shaper_profile_id, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager shaper profile delete
Delete an existing shaper profile. This operation fails when there is currently at least one user (i.e. shaper) of this shaper profile.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | shaper_profile_id | Shaper profile ID. Needs to be the valid. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_shared_shaper_add_update | ( | uint16_t | port_id, |
| uint32_t | shared_shaper_id, | ||
| uint32_t | shaper_profile_id, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager shared shaper add or update
When shared_shaper_id is not a valid shared shaper ID, a new shared shaper with this ID is created using the shaper profile identified by shaper_profile_id.
When shared_shaper_id is a valid shared shaper ID, this shared shaper is no longer using the shaper profile previously assigned to it and is updated to use the shaper profile identified by shaper_profile_id.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | shared_shaper_id | Shared shaper ID |
| [in] | shaper_profile_id | Shaper profile ID. Needs to be the valid. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_shared_shaper_delete | ( | uint16_t | port_id, |
| uint32_t | shared_shaper_id, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager shared shaper delete
Delete an existing shared shaper. This operation fails when there is currently at least one user (i.e. hierarchy node) of this shared shaper.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | shared_shaper_id | Shared shaper ID. Needs to be the valid. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_node_add | ( | uint16_t | port_id, |
| uint32_t | node_id, | ||
| uint32_t | parent_node_id, | ||
| uint32_t | priority, | ||
| uint32_t | weight, | ||
| uint32_t | level_id, | ||
| struct rte_tm_node_params * | params, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager node add
Create new node and connect it as child of an existing node. The new node is further identified by node_id, which needs to be unused by any of the existing nodes. The parent node is identified by parent_node_id, which needs to be the valid ID of an existing non-leaf node. The parent node is going to use the provided SP priority and WFQ weight to schedule its new child node.
This function has to be called for both leaf and non-leaf nodes. In the case of leaf nodes (i.e. node_id is within the range of 0 .. (N-1), with N as the number of configured Tx queues of the current port), the leaf node is configured rather than created (as the set of leaf nodes is predefined) and it is also connected as child of an existing node.
The first node that is added becomes the root node and all the nodes that are subsequently added have to be added as descendants of the root node. The parent of the root node has to be specified as RTE_TM_NODE_ID_NULL and there can only be one node with this parent ID (i.e. the root node). Further restrictions for root node: needs to be non-leaf, its private shaper profile needs to be valid and single rate, cannot use any shared shapers.
When called before rte_tm_hierarchy_commit() invocation, this function is typically used to define the initial start-up hierarchy for the port. Provided that dynamic hierarchy updates are supported by the current port (as advertised in the port capability set), this function can be also called after the rte_tm_hierarchy_commit() invocation.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | node_id | Node ID. Needs to be unused by any of the existing nodes. |
| [in] | parent_node_id | Parent node ID. Needs to be the valid. |
| [in] | priority | Node priority. The highest node priority is zero. Used by the SP algorithm running on the parent of the current node for scheduling this child node. |
| [in] | weight | Node weight. The node weight is relative to the weight sum of all siblings that have the same priority. The lowest weight is one. Used by the WFQ algorithm running on the parent of the current node for scheduling this child node. |
| [in] | level_id | Level ID that should be met by this node. The hierarchy level of the current node is already fully specified through its parent node (i.e. the level of this node is equal to the level of its parent node plus one), therefore the reason for providing this parameter is to enable the application to perform step-by-step checking of the node level during successive invocations of this function. When not desired, this check can be disabled by assigning value RTE_TM_NODE_LEVEL_ID_ANY to this parameter. |
| [in] | params | Node parameters. Needs to be pre-allocated and valid. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_node_delete | ( | uint16_t | port_id, |
| uint32_t | node_id, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager node delete
Delete an existing node. This operation fails when this node currently has at least one user (i.e. child node).
When called before rte_tm_hierarchy_commit() invocation, this function is typically used to define the initial start-up hierarchy for the port. Provided that dynamic hierarchy updates are supported by the current port (as advertised in the port capability set), this function can be also called after the rte_tm_hierarchy_commit() invocation.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | node_id | Node ID. Needs to be valid. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_node_suspend | ( | uint16_t | port_id, |
| uint32_t | node_id, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager node suspend
Suspend an existing node. While the node is in suspended state, no packet is scheduled from this node and its descendants. The node exits the suspended state through the node resume operation.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | node_id | Node ID. Needs to be valid. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_node_resume | ( | uint16_t | port_id, |
| uint32_t | node_id, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager node resume
Resume an existing node that is currently in suspended state. The node entered the suspended state as result of a previous node suspend operation.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | node_id | Node ID. Needs to be valid. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_hierarchy_commit | ( | uint16_t | port_id, |
| int | clear_on_fail, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager hierarchy commit
This function is called during the port initialization phase (before the Ethernet port is started) to freeze the start-up hierarchy.
This function typically performs the following steps: a) It validates the start-up hierarchy that was previously defined for the current port through successive rte_tm_node_add() invocations; b) Assuming successful validation, it performs all the necessary port specific configuration operations to install the specified hierarchy on the current port, with immediate effect once the port is started.
This function fails when the currently configured hierarchy is not supported by the Ethernet port, in which case the user can abort or try out another hierarchy configuration (e.g. a hierarchy with less leaf nodes), which can be build from scratch (when clear_on_fail is enabled) or by modifying the existing hierarchy configuration (when clear_on_fail is disabled).
Note that this function can still fail due to other causes (e.g. not enough memory available in the system, etc), even though the specified hierarchy is supported in principle by the current port.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | clear_on_fail | On function call failure, hierarchy is cleared when this parameter is non-zero and preserved when this parameter is equal to zero. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_node_parent_update | ( | uint16_t | port_id, |
| uint32_t | node_id, | ||
| uint32_t | parent_node_id, | ||
| uint32_t | priority, | ||
| uint32_t | weight, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager node parent update
This function may be used to move a node and its children to a different parent. Additionally, if the new parent is the same as the current parent, this function will update the priority/weight of an existing node.
Restriction for root node: its parent cannot be changed.
This function can only be called after the rte_tm_hierarchy_commit() invocation. Its success depends on the port support for this operation, as advertised through the port capability set.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | node_id | Node ID. Needs to be valid. |
| [in] | parent_node_id | Node ID for the new parent. Needs to be valid. |
| [in] | priority | Node priority. The highest node priority is zero. Used by the SP algorithm running on the parent of the current node for scheduling this child node. |
| [in] | weight | Node weight. The node weight is relative to the weight sum of all siblings that have the same priority. The lowest weight is zero. Used by the WFQ algorithm running on the parent of the current node for scheduling this child node. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_node_shaper_update | ( | uint16_t | port_id, |
| uint32_t | node_id, | ||
| uint32_t | shaper_profile_id, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager node private shaper update
Restriction for the root node: its private shaper profile needs to be valid and single rate.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | node_id | Node ID. Needs to be valid. |
| [in] | shaper_profile_id | Shaper profile ID for the private shaper of the current node. Needs to be either valid shaper profile ID or RTE_TM_SHAPER_PROFILE_ID_NONE, with the latter disabling the private shaper of the current node. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_node_shared_shaper_update | ( | uint16_t | port_id, |
| uint32_t | node_id, | ||
| uint32_t | shared_shaper_id, | ||
| int | add, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager node shared shapers update
Restriction for root node: cannot use any shared rate shapers.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | node_id | Node ID. Needs to be valid. |
| [in] | shared_shaper_id | Shared shaper ID. Needs to be valid. |
| [in] | add | Set to non-zero value to add this shared shaper to current node or to zero to delete this shared shaper from current node. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_node_stats_update | ( | uint16_t | port_id, |
| uint32_t | node_id, | ||
| uint64_t | stats_mask, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager node enabled statistics counters update
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | node_id | Node ID. Needs to be valid. |
| [in] | stats_mask | Mask of statistics counter types to be enabled for the current node. This needs to be a subset of the statistics counter types available for the current node. Any statistics counter type not included in this set is to be disabled for the current node. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_node_wfq_weight_mode_update | ( | uint16_t | port_id, |
| uint32_t | node_id, | ||
| int * | wfq_weight_mode, | ||
| uint32_t | n_sp_priorities, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager node WFQ weight mode update
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | node_id | Node ID. Needs to be valid non-leaf node ID. |
| [in] | wfq_weight_mode | WFQ weight mode for each SP priority. When NULL, it indicates that WFQ is to be used for all priorities. When non-NULL, it points to a pre-allocated array of n_sp_priorities values, with non-zero value for byte-mode and zero for packet-mode. |
| [in] | n_sp_priorities | Number of SP priorities. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_node_cman_update | ( | uint16_t | port_id, |
| uint32_t | node_id, | ||
| enum rte_tm_cman_mode | cman, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager node congestion management mode update
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | node_id | Node ID. Needs to be valid leaf node ID. |
| [in] | cman | Congestion management mode. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_node_wred_context_update | ( | uint16_t | port_id, |
| uint32_t | node_id, | ||
| uint32_t | wred_profile_id, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager node private WRED context update
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | node_id | Node ID. Needs to be valid leaf node ID. |
| [in] | wred_profile_id | WRED profile ID for the private WRED context of the current node. Needs to be either valid WRED profile ID or RTE_TM_WRED_PROFILE_ID_NONE, with the latter disabling the private WRED context of the current node. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_node_shared_wred_context_update | ( | uint16_t | port_id, |
| uint32_t | node_id, | ||
| uint32_t | shared_wred_context_id, | ||
| int | add, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager node shared WRED context update
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | node_id | Node ID. Needs to be valid leaf node ID. |
| [in] | shared_wred_context_id | Shared WRED context ID. Needs to be valid. |
| [in] | add | Set to non-zero value to add this shared WRED context to current node or to zero to delete this shared WRED context from current node. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_node_stats_read | ( | uint16_t | port_id, |
| uint32_t | node_id, | ||
| struct rte_tm_node_stats * | stats, | ||
| uint64_t * | stats_mask, | ||
| int | clear, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager node statistics counters read
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | node_id | Node ID. Needs to be valid. |
| [out] | stats | When non-NULL, it contains the current value for the statistics counters enabled for the current node. |
| [out] | stats_mask | When non-NULL, it contains the mask of statistics counter types that are currently enabled for this node, indicating which of the counters retrieved with the stats structure are valid. |
| [in] | clear | When this parameter has a non-zero value, the statistics counters are cleared (i.e. set to zero) immediately after they have been read, otherwise the statistics counters are left untouched. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_mark_vlan_dei | ( | uint16_t | port_id, |
| int | mark_green, | ||
| int | mark_yellow, | ||
| int | mark_red, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager packet marking - VLAN DEI (IEEE 802.1Q)
IEEE 802.1p maps the traffic class to the VLAN Priority Code Point (PCP) field (3 bits), while IEEE 802.1q maps the drop priority to the VLAN Drop Eligible Indicator (DEI) field (1 bit), which was previously named Canonical Format Indicator (CFI).
All VLAN frames of a given color get their DEI bit set if marking is enabled for this color; otherwise, their DEI bit is left as is (either set or not).
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | mark_green | Set to non-zero value to enable marking of green packets and to zero to disable it. |
| [in] | mark_yellow | Set to non-zero value to enable marking of yellow packets and to zero to disable it. |
| [in] | mark_red | Set to non-zero value to enable marking of red packets and to zero to disable it. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_mark_ip_ecn | ( | uint16_t | port_id, |
| int | mark_green, | ||
| int | mark_yellow, | ||
| int | mark_red, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager packet marking - IPv4 / IPv6 ECN (IETF RFC 3168)
IETF RFCs 2474 and 3168 reorganize the IPv4 Type of Service (TOS) field (8 bits) and the IPv6 Traffic Class (TC) field (8 bits) into Differentiated Services Codepoint (DSCP) field (6 bits) and Explicit Congestion Notification (ECN) field (2 bits). The DSCP field is typically used to encode the traffic class and/or drop priority (RFC 2597), while the ECN field is used by RFC 3168 to implement a congestion notification mechanism to be leveraged by transport layer protocols such as TCP and SCTP that have congestion control mechanisms.
When congestion is experienced, as alternative to dropping the packet, routers can change the ECN field of input packets from 2'b01 or 2'b10 (values indicating that source endpoint is ECN-capable) to 2'b11 (meaning that congestion is experienced). The destination endpoint can use the ECN-Echo (ECE) TCP flag to relay the congestion indication back to the source endpoint, which acknowledges it back to the destination endpoint with the Congestion Window Reduced (CWR) TCP flag.
All IPv4/IPv6 packets of a given color with ECN set to 2’b01 or 2’b10 carrying TCP or SCTP have their ECN set to 2’b11 if the marking feature is enabled for the current color, otherwise the ECN field is left as is.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | mark_green | Set to non-zero value to enable marking of green packets and to zero to disable it. |
| [in] | mark_yellow | Set to non-zero value to enable marking of yellow packets and to zero to disable it. |
| [in] | mark_red | Set to non-zero value to enable marking of red packets and to zero to disable it. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
| __rte_experimental int rte_tm_mark_ip_dscp | ( | uint16_t | port_id, |
| int | mark_green, | ||
| int | mark_yellow, | ||
| int | mark_red, | ||
| struct rte_tm_error * | error | ||
| ) |
Traffic manager packet marking - IPv4 / IPv6 DSCP (IETF RFC 2597)
IETF RFC 2597 maps the traffic class and the drop priority to the IPv4/IPv6 Differentiated Services Codepoint (DSCP) field (6 bits). Here are the DSCP values proposed by this RFC:
Class 1 Class 2 Class 3 Class 4
+----------+----------+----------+----------+
Low Drop Prec | 001010 | 010010 | 011010 | 100010 |
Medium Drop Prec | 001100 | 010100 | 011100 | 100100 |
High Drop Prec | 001110 | 010110 | 011110 | 100110 |
+----------+----------+----------+----------+
There are 4 traffic classes (classes 1 .. 4) encoded by DSCP bits 1 and 2, as well as 3 drop priorities (low/medium/high) encoded by DSCP bits 3 and 4.
All IPv4/IPv6 packets have their color marked into DSCP bits 3 and 4 as follows: green mapped to Low Drop Precedence (2’b01), yellow to Medium (2’b10) and red to High (2’b11). Marking needs to be explicitly enabled for each color; when not enabled for a given color, the DSCP field of all packets with that color is left as is.
| [in] | port_id | The port identifier of the Ethernet device. |
| [in] | mark_green | Set to non-zero value to enable marking of green packets and to zero to disable it. |
| [in] | mark_yellow | Set to non-zero value to enable marking of yellow packets and to zero to disable it. |
| [in] | mark_red | Set to non-zero value to enable marking of red packets and to zero to disable it. |
| [out] | error | Error details. Filled in only on error, when not NULL. |
1.9.4