#include <rte_bbdev_op.h>

Data Fields
struct rte_bbdev_op_data	input

struct rte_bbdev_op_data	hard_output

struct rte_bbdev_op_data	soft_output

struct rte_bbdev_op_data	harq_combined_input

struct rte_bbdev_op_data	harq_combined_output

uint32_t	op_flags

uint8_t	rv_index

uint8_t	iter_max

uint8_t	iter_count

uint8_t	basegraph

uint16_t	z_c

uint16_t	n_cb

uint8_t	q_m

uint16_t	n_filler

uint8_t	code_block_mode

struct rte_bbdev_op_dec_ldpc_cb_params	cb_params

struct rte_bbdev_op_dec_ldpc_tb_params	tb_params

Detailed Description

Operation structure for LDPC decode.

An operation can be performed on one CB at a time "CB-mode". An operation can also be performed on one or multiple CBs that logically belong to a TB "TB-mode" (Currently not supported).

The input encoded CB data is the Virtual Circular Buffer data stream.

Each byte in the input circular buffer is the LLR value of each bit of the original CB.

Hard output is a mandatory capability that all BBDEV PMDs support. This is the decoded CBs (CRC24A/B is the last 24-bit in each decoded CB).

Soft output is an optional capability for BBDEV PMDs. If supported, an LLR rate matched output is computed in the soft_output buffer structure. These are A Posteriori Probabilities (APP) LLR samples for coded bits.

HARQ combined output is an optional capability for BBDEV PMDs. If supported, a LLR output is streamed to the harq_combined_output buffer.

HARQ combined input is an optional capability for BBDEV PMDs. If supported, a LLR input is streamed from the harq_combined_input buffer.

The output mbuf data structure is expected to be allocated by the application with enough room for the output data.

Definition at line 450 of file rte_bbdev_op.h.

Field Documentation

◆ input

struct rte_bbdev_op_data input

The Virtual Circular Buffer for this code block, one LLR per bit of the original CB.

Definition at line 454 of file rte_bbdev_op.h.

◆ hard_output

struct rte_bbdev_op_data hard_output

The hard decisions buffer for the decoded output, size K for each CB

Definition at line 458 of file rte_bbdev_op.h.

◆ soft_output

struct rte_bbdev_op_data soft_output

The soft LLR output LLR stream buffer - optional

Definition at line 460 of file rte_bbdev_op.h.

◆ harq_combined_input

struct rte_bbdev_op_data harq_combined_input

The HARQ combined LLR stream input buffer - optional

Definition at line 462 of file rte_bbdev_op.h.

◆ harq_combined_output

struct rte_bbdev_op_data harq_combined_output

The HARQ combined LLR stream output buffer - optional

Definition at line 464 of file rte_bbdev_op.h.

◆ op_flags

uint32_t op_flags

Flags from rte_bbdev_op_ldpcdec_flag_bitmasks

Definition at line 467 of file rte_bbdev_op.h.

◆ rv_index

uint8_t rv_index

Rate matching redundancy version [3GPP TS38.212, section 5.4.2.1]

Definition at line 472 of file rte_bbdev_op.h.

◆ iter_max

uint8_t iter_max

The maximum number of iterations to perform in decoding CB in this operation - input

Definition at line 476 of file rte_bbdev_op.h.

◆ iter_count

uint8_t iter_count

The number of iterations that were performed in decoding CB in this decode operation - output

Definition at line 480 of file rte_bbdev_op.h.

◆ basegraph

uint8_t basegraph

1: LDPC Base graph 1, 2: LDPC Base graph 2. [3GPP TS38.212, section 5.2.2]

Definition at line 484 of file rte_bbdev_op.h.

◆ z_c

uint16_t z_c

Zc, LDPC lifting size. [3GPP TS38.212, section 5.2.2]

Definition at line 488 of file rte_bbdev_op.h.

◆ n_cb

uint16_t n_cb

Ncb, length of the circular buffer in bits. [3GPP TS38.212, section 5.4.2.1]

Definition at line 492 of file rte_bbdev_op.h.

◆ q_m

uint8_t q_m

Qm, modulation order {1,2,4,6,8}. [3GPP TS38.212, section 5.4.2.2]

Definition at line 496 of file rte_bbdev_op.h.

◆ n_filler

uint16_t n_filler

Number of Filler bits, n_filler = K – K’ [3GPP TS38.212 section 5.2.2]

Definition at line 500 of file rte_bbdev_op.h.

◆ code_block_mode

uint8_t code_block_mode

[0 - TB : 1 - CB]

Definition at line 502 of file rte_bbdev_op.h.

◆ cb_params

struct rte_bbdev_op_dec_ldpc_cb_params cb_params

Struct which stores Code Block specific parameters

Definition at line 505 of file rte_bbdev_op.h.

◆ tb_params

struct rte_bbdev_op_dec_ldpc_tb_params tb_params

Struct which stores Transport Block specific parameters

Definition at line 507 of file rte_bbdev_op.h.

The documentation for this struct was generated from the following file:

lib/bbdev/rte_bbdev_op.h

Data Fields