rte_flow.h File Reference

#include <stddef.h>
#include <stdint.h>
#include <rte_arp.h>
#include <rte_common.h>
#include <rte_ether.h>
#include <rte_icmp.h>
#include <rte_ip.h>
#include <rte_sctp.h>
#include <rte_tcp.h>
#include <rte_udp.h>
#include <rte_byteorder.h>
#include <rte_esp.h>
#include <rte_higig.h>
#include <rte_ecpri.h>
#include <rte_mbuf.h>
#include <rte_mbuf_dyn.h>

Go to the source code of this file.

Data Structures
struct	rte_flow_attr
struct	rte_flow_item_higig2_hdr
struct	rte_flow_item_any
struct	rte_flow_item_vf
struct	rte_flow_item_phy_port
struct	rte_flow_item_port_id
struct	rte_flow_item_raw
struct	rte_flow_item_eth
struct	rte_flow_item_vlan
struct	rte_flow_item_ipv4
struct	rte_flow_item_ipv6
struct	rte_flow_item_icmp
struct	rte_flow_item_udp
struct	rte_flow_item_tcp
struct	rte_flow_item_sctp
struct	rte_flow_item_vxlan
struct	rte_flow_item_e_tag
struct	rte_flow_item_nvgre
struct	rte_flow_item_mpls
struct	rte_flow_item_gre
struct	rte_flow_item_fuzzy
struct	rte_flow_item_gtp
struct	rte_flow_item_esp
struct	rte_flow_item_geneve
struct	rte_flow_item_vxlan_gpe
struct	rte_flow_item_arp_eth_ipv4
struct	rte_flow_item_ipv6_ext
struct	rte_flow_item_ipv6_frag_ext
struct	rte_flow_item_icmp6
struct	rte_flow_item_icmp6_nd_ns
struct	rte_flow_item_icmp6_nd_na
struct	rte_flow_item_icmp6_nd_opt
struct	rte_flow_item_icmp6_nd_opt_sla_eth
struct	rte_flow_item_icmp6_nd_opt_tla_eth
struct	rte_flow_item_meta
struct	rte_flow_item_gtp_psc
struct	rte_flow_item_pppoe
struct	rte_flow_item_pppoe_proto_id
struct	rte_flow_item_tag
struct	rte_flow_item_l2tpv3oip
struct	rte_flow_item_mark
struct	rte_flow_item_nsh
struct	rte_flow_item_igmp
struct	rte_flow_item_ah
struct	rte_flow_item_pfcp
struct	rte_flow_item_ecpri
struct	rte_flow_item
struct	rte_flow_action_mark
struct	rte_flow_action_jump
struct	rte_flow_action_queue
struct	rte_flow_action_age
struct	rte_flow_query_age
struct	rte_flow_action_count
struct	rte_flow_query_count
struct	rte_flow_action_rss
struct	rte_flow_action_vf
struct	rte_flow_action_phy_port
struct	rte_flow_action_port_id
struct	rte_flow_action_meter
struct	rte_flow_action_security
struct	rte_flow_action_of_set_mpls_ttl
struct	rte_flow_action_of_set_nw_ttl
struct	rte_flow_action_of_push_vlan
struct	rte_flow_action_of_set_vlan_vid
struct	rte_flow_action_of_set_vlan_pcp
struct	rte_flow_action_of_pop_mpls
struct	rte_flow_action_of_push_mpls
struct	rte_flow_action_vxlan_encap
struct	rte_flow_action_nvgre_encap
struct	rte_flow_action_raw_encap
struct	rte_flow_action_raw_decap
struct	rte_flow_action_set_ipv4
struct	rte_flow_action_set_ipv6
struct	rte_flow_action_set_tp
struct	rte_flow_action_set_ttl
struct	rte_flow_action_set_mac
struct	rte_flow_action_set_tag
struct	rte_flow_action_set_meta
struct	rte_flow_action_set_dscp
struct	rte_flow_action
struct	rte_flow_action_sample
struct	rte_flow_error
struct	rte_flow_conv_rule
struct	rte_flow_desc
struct	rte_flow_shared_action_conf
struct	rte_flow_restore_info

Macros
#define	RTE_FLOW_RESTORE_INFO_TUNNEL   (1ULL << 0)
#define	RTE_FLOW_RESTORE_INFO_ENCAPSULATED   (1ULL << 1)
#define	RTE_FLOW_RESTORE_INFO_GROUP_ID   (1ULL << 2)

Enumerations
enum	rte_flow_item_type {   RTE_FLOW_ITEM_TYPE_END, RTE_FLOW_ITEM_TYPE_VOID, RTE_FLOW_ITEM_TYPE_INVERT, RTE_FLOW_ITEM_TYPE_ANY,   RTE_FLOW_ITEM_TYPE_PF, RTE_FLOW_ITEM_TYPE_VF, RTE_FLOW_ITEM_TYPE_PHY_PORT, RTE_FLOW_ITEM_TYPE_PORT_ID,   RTE_FLOW_ITEM_TYPE_RAW, RTE_FLOW_ITEM_TYPE_ETH, RTE_FLOW_ITEM_TYPE_VLAN, RTE_FLOW_ITEM_TYPE_IPV4,   RTE_FLOW_ITEM_TYPE_IPV6, RTE_FLOW_ITEM_TYPE_ICMP, RTE_FLOW_ITEM_TYPE_UDP, RTE_FLOW_ITEM_TYPE_TCP,   RTE_FLOW_ITEM_TYPE_SCTP, RTE_FLOW_ITEM_TYPE_VXLAN, RTE_FLOW_ITEM_TYPE_E_TAG, RTE_FLOW_ITEM_TYPE_NVGRE,   RTE_FLOW_ITEM_TYPE_MPLS, RTE_FLOW_ITEM_TYPE_GRE, RTE_FLOW_ITEM_TYPE_FUZZY, RTE_FLOW_ITEM_TYPE_GTP,   RTE_FLOW_ITEM_TYPE_GTPC, RTE_FLOW_ITEM_TYPE_GTPU, RTE_FLOW_ITEM_TYPE_ESP, RTE_FLOW_ITEM_TYPE_GENEVE,   RTE_FLOW_ITEM_TYPE_VXLAN_GPE, RTE_FLOW_ITEM_TYPE_ARP_ETH_IPV4, RTE_FLOW_ITEM_TYPE_IPV6_EXT, RTE_FLOW_ITEM_TYPE_ICMP6,   RTE_FLOW_ITEM_TYPE_ICMP6_ND_NS, RTE_FLOW_ITEM_TYPE_ICMP6_ND_NA, RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT, RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT_SLA_ETH,   RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT_TLA_ETH, RTE_FLOW_ITEM_TYPE_MARK, RTE_FLOW_ITEM_TYPE_META, RTE_FLOW_ITEM_TYPE_GRE_KEY,   RTE_FLOW_ITEM_TYPE_GTP_PSC, RTE_FLOW_ITEM_TYPE_PPPOES, RTE_FLOW_ITEM_TYPE_PPPOED, RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID,   RTE_FLOW_ITEM_TYPE_NSH, RTE_FLOW_ITEM_TYPE_IGMP, RTE_FLOW_ITEM_TYPE_AH, RTE_FLOW_ITEM_TYPE_HIGIG2,   RTE_FLOW_ITEM_TYPE_TAG, RTE_FLOW_ITEM_TYPE_L2TPV3OIP, RTE_FLOW_ITEM_TYPE_PFCP, RTE_FLOW_ITEM_TYPE_ECPRI,   RTE_FLOW_ITEM_TYPE_IPV6_FRAG_EXT }
enum	rte_flow_action_type {   RTE_FLOW_ACTION_TYPE_END, RTE_FLOW_ACTION_TYPE_VOID, RTE_FLOW_ACTION_TYPE_PASSTHRU, RTE_FLOW_ACTION_TYPE_JUMP,   RTE_FLOW_ACTION_TYPE_MARK, RTE_FLOW_ACTION_TYPE_FLAG, RTE_FLOW_ACTION_TYPE_QUEUE, RTE_FLOW_ACTION_TYPE_DROP,   RTE_FLOW_ACTION_TYPE_COUNT, RTE_FLOW_ACTION_TYPE_RSS, RTE_FLOW_ACTION_TYPE_PF, RTE_FLOW_ACTION_TYPE_VF,   RTE_FLOW_ACTION_TYPE_PHY_PORT, RTE_FLOW_ACTION_TYPE_PORT_ID, RTE_FLOW_ACTION_TYPE_METER, RTE_FLOW_ACTION_TYPE_SECURITY,   RTE_FLOW_ACTION_TYPE_OF_SET_MPLS_TTL, RTE_FLOW_ACTION_TYPE_OF_DEC_MPLS_TTL, RTE_FLOW_ACTION_TYPE_OF_SET_NW_TTL, RTE_FLOW_ACTION_TYPE_OF_DEC_NW_TTL,   RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_OUT, RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_IN, RTE_FLOW_ACTION_TYPE_OF_POP_VLAN, RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN,   RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID, RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP, RTE_FLOW_ACTION_TYPE_OF_POP_MPLS, RTE_FLOW_ACTION_TYPE_OF_PUSH_MPLS,   RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP, RTE_FLOW_ACTION_TYPE_VXLAN_DECAP, RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP, RTE_FLOW_ACTION_TYPE_NVGRE_DECAP,   RTE_FLOW_ACTION_TYPE_RAW_ENCAP, RTE_FLOW_ACTION_TYPE_RAW_DECAP, RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC, RTE_FLOW_ACTION_TYPE_SET_IPV4_DST,   RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC, RTE_FLOW_ACTION_TYPE_SET_IPV6_DST, RTE_FLOW_ACTION_TYPE_SET_TP_SRC, RTE_FLOW_ACTION_TYPE_SET_TP_DST,   RTE_FLOW_ACTION_TYPE_MAC_SWAP, RTE_FLOW_ACTION_TYPE_DEC_TTL, RTE_FLOW_ACTION_TYPE_SET_TTL, RTE_FLOW_ACTION_TYPE_SET_MAC_SRC,   RTE_FLOW_ACTION_TYPE_SET_MAC_DST, RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ, RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ, RTE_FLOW_ACTION_TYPE_INC_TCP_ACK,   RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK, RTE_FLOW_ACTION_TYPE_SET_TAG, RTE_FLOW_ACTION_TYPE_SET_META, RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP,   RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP, RTE_FLOW_ACTION_TYPE_AGE, RTE_FLOW_ACTION_TYPE_SAMPLE, RTE_FLOW_ACTION_TYPE_SHARED }
enum	rte_eth_hash_function { , RTE_ETH_HASH_FUNCTION_TOEPLITZ, RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ }
enum	rte_flow_error_type {   RTE_FLOW_ERROR_TYPE_NONE, RTE_FLOW_ERROR_TYPE_UNSPECIFIED, RTE_FLOW_ERROR_TYPE_HANDLE, RTE_FLOW_ERROR_TYPE_ATTR_GROUP,   RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY, RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,   RTE_FLOW_ERROR_TYPE_ATTR, RTE_FLOW_ERROR_TYPE_ITEM_NUM, RTE_FLOW_ERROR_TYPE_ITEM_SPEC, RTE_FLOW_ERROR_TYPE_ITEM_LAST,   RTE_FLOW_ERROR_TYPE_ITEM_MASK, RTE_FLOW_ERROR_TYPE_ITEM, RTE_FLOW_ERROR_TYPE_ACTION_NUM, RTE_FLOW_ERROR_TYPE_ACTION_CONF,   RTE_FLOW_ERROR_TYPE_ACTION }
enum	rte_flow_conv_op {   RTE_FLOW_CONV_OP_NONE, RTE_FLOW_CONV_OP_ATTR, RTE_FLOW_CONV_OP_ITEM, RTE_FLOW_CONV_OP_ACTION,   RTE_FLOW_CONV_OP_PATTERN, RTE_FLOW_CONV_OP_ACTIONS, RTE_FLOW_CONV_OP_RULE, RTE_FLOW_CONV_OP_ITEM_NAME,   RTE_FLOW_CONV_OP_ACTION_NAME, RTE_FLOW_CONV_OP_ITEM_NAME_PTR, RTE_FLOW_CONV_OP_ACTION_NAME_PTR }

Functions
__rte_experimental int	rte_flow_dev_dump (uint16_t port_id, FILE *file, struct rte_flow_error *error)
static __rte_experimental int	rte_flow_dynf_metadata_avail (void)
__rte_experimental int	rte_flow_dynf_metadata_register (void)
int	rte_flow_validate (uint16_t port_id, const struct rte_flow_attr *attr, const struct rte_flow_item pattern[], const struct rte_flow_action actions[], struct rte_flow_error *error)
struct rte_flow *	rte_flow_create (uint16_t port_id, const struct rte_flow_attr *attr, const struct rte_flow_item pattern[], const struct rte_flow_action actions[], struct rte_flow_error *error)
int	rte_flow_destroy (uint16_t port_id, struct rte_flow *flow, struct rte_flow_error *error)
int	rte_flow_flush (uint16_t port_id, struct rte_flow_error *error)
int	rte_flow_query (uint16_t port_id, struct rte_flow *flow, const struct rte_flow_action *action, void *data, struct rte_flow_error *error)
int	rte_flow_isolate (uint16_t port_id, int set, struct rte_flow_error *error)
int	rte_flow_error_set (struct rte_flow_error *error, int code, enum rte_flow_error_type type, const void *cause, const char *message)
__rte_deprecated size_t	rte_flow_copy (struct rte_flow_desc *fd, size_t len, const struct rte_flow_attr *attr, const struct rte_flow_item *items, const struct rte_flow_action *actions)
__rte_experimental int	rte_flow_conv (enum rte_flow_conv_op op, void *dst, size_t size, const void *src, struct rte_flow_error *error)
__rte_experimental int	rte_flow_get_aged_flows (uint16_t port_id, void **contexts, uint32_t nb_contexts, struct rte_flow_error *error)
__rte_experimental struct rte_flow_shared_action *	rte_flow_shared_action_create (uint16_t port_id, const struct rte_flow_shared_action_conf *conf, const struct rte_flow_action *action, struct rte_flow_error *error)
__rte_experimental int	rte_flow_shared_action_destroy (uint16_t port_id, struct rte_flow_shared_action *action, struct rte_flow_error *error)
__rte_experimental int	rte_flow_shared_action_update (uint16_t port_id, struct rte_flow_shared_action *action, const struct rte_flow_action *update, struct rte_flow_error *error)
__rte_experimental int	rte_flow_shared_action_query (uint16_t port_id, const struct rte_flow_shared_action *action, void *data, struct rte_flow_error *error)
__rte_experimental int	rte_flow_tunnel_decap_set (uint16_t port_id, struct rte_flow_tunnel *tunnel, struct rte_flow_action **actions, uint32_t *num_of_actions, struct rte_flow_error *error)
__rte_experimental int	rte_flow_tunnel_match (uint16_t port_id, struct rte_flow_tunnel *tunnel, struct rte_flow_item **items, uint32_t *num_of_items, struct rte_flow_error *error)
__rte_experimental int	rte_flow_get_restore_info (uint16_t port_id, struct rte_mbuf *m, struct rte_flow_restore_info *info, struct rte_flow_error *error)
__rte_experimental int	rte_flow_tunnel_action_decap_release (uint16_t port_id, struct rte_flow_action *actions, uint32_t num_of_actions, struct rte_flow_error *error)
__rte_experimental int	rte_flow_tunnel_item_release (uint16_t port_id, struct rte_flow_item *items, uint32_t num_of_items, struct rte_flow_error *error)

Variables
static const struct rte_flow_item_higig2_hdr	rte_flow_item_higig2_hdr_mask
static const struct rte_flow_item_any	rte_flow_item_any_mask
static const struct rte_flow_item_vf	rte_flow_item_vf_mask
static const struct rte_flow_item_phy_port	rte_flow_item_phy_port_mask
static const struct rte_flow_item_port_id	rte_flow_item_port_id_mask
static const struct rte_flow_item_raw	rte_flow_item_raw_mask
static const struct rte_flow_item_eth	rte_flow_item_eth_mask
static const struct rte_flow_item_vlan	rte_flow_item_vlan_mask
static const struct rte_flow_item_ipv4	rte_flow_item_ipv4_mask
static const struct rte_flow_item_ipv6	rte_flow_item_ipv6_mask
static const struct rte_flow_item_icmp	rte_flow_item_icmp_mask
static const struct rte_flow_item_udp	rte_flow_item_udp_mask
static const struct rte_flow_item_tcp	rte_flow_item_tcp_mask
static const struct rte_flow_item_sctp	rte_flow_item_sctp_mask
static const struct rte_flow_item_vxlan	rte_flow_item_vxlan_mask
static const struct rte_flow_item_e_tag	rte_flow_item_e_tag_mask
static const struct rte_flow_item_nvgre	rte_flow_item_nvgre_mask
static const struct rte_flow_item_mpls	rte_flow_item_mpls_mask
static const struct rte_flow_item_gre	rte_flow_item_gre_mask
static const struct rte_flow_item_fuzzy	rte_flow_item_fuzzy_mask
static const struct rte_flow_item_gtp	rte_flow_item_gtp_mask
static const struct rte_flow_item_esp	rte_flow_item_esp_mask
static const struct rte_flow_item_geneve	rte_flow_item_geneve_mask
static const struct rte_flow_item_vxlan_gpe	rte_flow_item_vxlan_gpe_mask
static const struct rte_flow_item_arp_eth_ipv4	rte_flow_item_arp_eth_ipv4_mask
static const struct rte_flow_item_ipv6_ext	rte_flow_item_ipv6_ext_mask
static const struct rte_flow_item_icmp6	rte_flow_item_icmp6_mask
static const struct rte_flow_item_icmp6_nd_ns	rte_flow_item_icmp6_nd_ns_mask
static const struct rte_flow_item_icmp6_nd_na	rte_flow_item_icmp6_nd_na_mask
static const struct rte_flow_item_icmp6_nd_opt	rte_flow_item_icmp6_nd_opt_mask
static const struct rte_flow_item_icmp6_nd_opt_sla_eth	rte_flow_item_icmp6_nd_opt_sla_eth_mask
static const struct rte_flow_item_icmp6_nd_opt_tla_eth	rte_flow_item_icmp6_nd_opt_tla_eth_mask
static const struct rte_flow_item_meta	rte_flow_item_meta_mask
static const struct rte_flow_item_gtp_psc	rte_flow_item_gtp_psc_mask
static const struct rte_flow_item_pppoe_proto_id	rte_flow_item_pppoe_proto_id_mask
static const struct rte_flow_item_tag	rte_flow_item_tag_mask
static const struct rte_flow_item_l2tpv3oip	rte_flow_item_l2tpv3oip_mask
static const struct rte_flow_item_mark	rte_flow_item_mark_mask
static const struct rte_flow_item_nsh	rte_flow_item_nsh_mask
static const struct rte_flow_item_igmp	rte_flow_item_igmp_mask
static const struct rte_flow_item_ah	rte_flow_item_ah_mask
static const struct rte_flow_item_pfcp	rte_flow_item_pfcp_mask
static const struct rte_flow_item_ecpri	rte_flow_item_ecpri_mask

Detailed Description

RTE generic flow API

This interface provides the ability to program packet matching and associated actions in hardware through flow rules.

Definition in file rte_flow.h.

Macro Definition Documentation

RTE_FLOW_RESTORE_INFO_TUNNEL

#define RTE_FLOW_RESTORE_INFO_TUNNEL   (1ULL << 0)

Indicate that the packet has a tunnel.

Definition at line 3672 of file rte_flow.h.

RTE_FLOW_RESTORE_INFO_ENCAPSULATED

#define RTE_FLOW_RESTORE_INFO_ENCAPSULATED   (1ULL << 1)

Indicate that the packet has a non decapsulated tunnel header.

Definition at line 3677 of file rte_flow.h.

RTE_FLOW_RESTORE_INFO_GROUP_ID

#define RTE_FLOW_RESTORE_INFO_GROUP_ID   (1ULL << 2)

Indicate that the packet has a group_id.

Definition at line 3682 of file rte_flow.h.

Enumeration Type Documentation

rte_flow_item_type

enum rte_flow_item_type

Matching pattern item types.

Pattern items fall in two categories:

• Matching protocol headers and packet data, usually associated with a specification structure. These must be stacked in the same order as the protocol layers to match inside packets, starting from the lowest.
• Matching meta-data or affecting pattern processing, often without a specification structure. Since they do not match packet contents, their position in the list is usually not relevant.

See the description of individual types for more information. Those marked with [META] fall into the second category.

Enumerator
RTE_FLOW_ITEM_TYPE_END	[META] End marker for item lists. Prevents further processing of items, thereby ending the pattern. No associated specification structure.
RTE_FLOW_ITEM_TYPE_VOID	[META] Used as a placeholder for convenience. It is ignored and simply discarded by PMDs. No associated specification structure.
RTE_FLOW_ITEM_TYPE_INVERT	[META] Inverted matching, i.e. process packets that do not match the pattern. No associated specification structure.
RTE_FLOW_ITEM_TYPE_ANY	Matches any protocol in place of the current layer, a single ANY may also stand for several protocol layers. See struct rte_flow_item_any.
RTE_FLOW_ITEM_TYPE_PF	[META] Matches traffic originating from (ingress) or going to (egress) the physical function of the current device. No associated specification structure.
RTE_FLOW_ITEM_TYPE_VF	[META] Matches traffic originating from (ingress) or going to (egress) a given virtual function of the current device. See struct rte_flow_item_vf.
RTE_FLOW_ITEM_TYPE_PHY_PORT	[META] Matches traffic originating from (ingress) or going to (egress) a physical port of the underlying device. See struct rte_flow_item_phy_port.
RTE_FLOW_ITEM_TYPE_PORT_ID	[META] Matches traffic originating from (ingress) or going to (egress) a given DPDK port ID. See struct rte_flow_item_port_id.
RTE_FLOW_ITEM_TYPE_RAW	Matches a byte string of a given length at a given offset. See struct rte_flow_item_raw.
RTE_FLOW_ITEM_TYPE_ETH	Matches an Ethernet header. See struct rte_flow_item_eth.
RTE_FLOW_ITEM_TYPE_VLAN	Matches an 802.1Q/ad VLAN tag. See struct rte_flow_item_vlan.
RTE_FLOW_ITEM_TYPE_IPV4	Matches an IPv4 header. See struct rte_flow_item_ipv4.
RTE_FLOW_ITEM_TYPE_IPV6	Matches an IPv6 header. See struct rte_flow_item_ipv6.
RTE_FLOW_ITEM_TYPE_ICMP	Matches an ICMP header. See struct rte_flow_item_icmp.
RTE_FLOW_ITEM_TYPE_UDP	Matches a UDP header. See struct rte_flow_item_udp.
RTE_FLOW_ITEM_TYPE_TCP	Matches a TCP header. See struct rte_flow_item_tcp.
RTE_FLOW_ITEM_TYPE_SCTP	Matches a SCTP header. See struct rte_flow_item_sctp.
RTE_FLOW_ITEM_TYPE_VXLAN	Matches a VXLAN header. See struct rte_flow_item_vxlan.
RTE_FLOW_ITEM_TYPE_E_TAG	Matches a E_TAG header. See struct rte_flow_item_e_tag.
RTE_FLOW_ITEM_TYPE_NVGRE	Matches a NVGRE header. See struct rte_flow_item_nvgre.
RTE_FLOW_ITEM_TYPE_MPLS	Matches a MPLS header. See struct rte_flow_item_mpls.
RTE_FLOW_ITEM_TYPE_GRE	Matches a GRE header. See struct rte_flow_item_gre.
RTE_FLOW_ITEM_TYPE_FUZZY	[META] Fuzzy pattern match, expect faster than default. This is for device that support fuzzy matching option. Usually a fuzzy matching is fast but the cost is accuracy. See struct rte_flow_item_fuzzy.
RTE_FLOW_ITEM_TYPE_GTP	Matches a GTP header. Configure flow for GTP packets. See struct rte_flow_item_gtp.
RTE_FLOW_ITEM_TYPE_GTPC	Matches a GTP header. Configure flow for GTP-C packets. See struct rte_flow_item_gtp.
RTE_FLOW_ITEM_TYPE_GTPU	Matches a GTP header. Configure flow for GTP-U packets. See struct rte_flow_item_gtp.
RTE_FLOW_ITEM_TYPE_ESP	Matches a ESP header. See struct rte_flow_item_esp.
RTE_FLOW_ITEM_TYPE_GENEVE	Matches a GENEVE header. See struct rte_flow_item_geneve.
RTE_FLOW_ITEM_TYPE_VXLAN_GPE	Matches a VXLAN-GPE header. See struct rte_flow_item_vxlan_gpe.
RTE_FLOW_ITEM_TYPE_ARP_ETH_IPV4	Matches an ARP header for Ethernet/IPv4. See struct rte_flow_item_arp_eth_ipv4.
RTE_FLOW_ITEM_TYPE_IPV6_EXT	Matches the presence of any IPv6 extension header. See struct rte_flow_item_ipv6_ext.
RTE_FLOW_ITEM_TYPE_ICMP6	Matches any ICMPv6 header. See struct rte_flow_item_icmp6.
RTE_FLOW_ITEM_TYPE_ICMP6_ND_NS	Matches an ICMPv6 neighbor discovery solicitation. See struct rte_flow_item_icmp6_nd_ns.
RTE_FLOW_ITEM_TYPE_ICMP6_ND_NA	Matches an ICMPv6 neighbor discovery advertisement. See struct rte_flow_item_icmp6_nd_na.
RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT	Matches the presence of any ICMPv6 neighbor discovery option. See struct rte_flow_item_icmp6_nd_opt.
RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT_SLA_ETH	Matches an ICMPv6 neighbor discovery source Ethernet link-layer address option. See struct rte_flow_item_icmp6_nd_opt_sla_eth.
RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT_TLA_ETH	Matches an ICMPv6 neighbor discovery target Ethernet link-layer address option. See struct rte_flow_item_icmp6_nd_opt_tla_eth.
RTE_FLOW_ITEM_TYPE_MARK	Matches specified mark field. See struct rte_flow_item_mark.
RTE_FLOW_ITEM_TYPE_META	[META] Matches a metadata value. See struct rte_flow_item_meta.
RTE_FLOW_ITEM_TYPE_GRE_KEY	Matches a GRE optional key field. The value should a big-endian 32bit integer. When this item present the K bit is implicitly matched as "1" in the default mask. spec/mask type: rte_be32_t *
RTE_FLOW_ITEM_TYPE_GTP_PSC	Matches a GTP extension header: PDU session container. Configure flow for GTP packets with extension header type 0x85. See struct rte_flow_item_gtp_psc.
RTE_FLOW_ITEM_TYPE_PPPOES	Matches a PPPoE header. Configure flow for PPPoE session packets. See struct rte_flow_item_pppoe.
RTE_FLOW_ITEM_TYPE_PPPOED	Matches a PPPoE header. Configure flow for PPPoE discovery packets. See struct rte_flow_item_pppoe.
RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID	Matches a PPPoE optional proto_id field. It only applies to PPPoE session packets. See struct rte_flow_item_pppoe_proto_id.
RTE_FLOW_ITEM_TYPE_NSH	Matches Network service header (NSH). See struct rte_flow_item_nsh.
RTE_FLOW_ITEM_TYPE_IGMP	Matches Internet Group Management Protocol (IGMP). See struct rte_flow_item_igmp.
RTE_FLOW_ITEM_TYPE_AH	Matches IP Authentication Header (AH). See struct rte_flow_item_ah.
RTE_FLOW_ITEM_TYPE_HIGIG2	Matches a HIGIG header. see struct rte_flow_item_higig2_hdr.
RTE_FLOW_ITEM_TYPE_TAG	[META] Matches a tag value. See struct rte_flow_item_tag.
RTE_FLOW_ITEM_TYPE_L2TPV3OIP	Matches a L2TPv3 over IP header. Configure flow for L2TPv3 over IP packets. See struct rte_flow_item_l2tpv3oip.
RTE_FLOW_ITEM_TYPE_PFCP	Matches PFCP Header. See struct rte_flow_item_pfcp.
RTE_FLOW_ITEM_TYPE_ECPRI	Matches eCPRI Header. Configure flow for eCPRI over ETH or UDP packets. See struct rte_flow_item_ecpri.
RTE_FLOW_ITEM_TYPE_IPV6_FRAG_EXT	Matches the presence of IPv6 fragment extension header. See struct rte_flow_item_ipv6_frag_ext.

Definition at line 119 of file rte_flow.h.

rte_flow_action_type

enum rte_flow_action_type

Action types.

Each possible action is represented by a type. An action can have an associated configuration object. Several actions combined in a list can be assigned to a flow rule and are performed in order.

They fall in three categories:

• Actions that modify the fate of matching traffic, for instance by dropping or assigning it a specific destination.
• Actions that modify matching traffic contents or its properties. This includes adding/removing encapsulation, encryption, compression and marks.
• Actions related to the flow rule itself, such as updating counters or making it non-terminating.

Flow rules being terminating by default, not specifying any action of the fate kind results in undefined behavior. This applies to both ingress and egress.

PASSTHRU, when supported, makes a flow rule non-terminating.

Enumerator
RTE_FLOW_ACTION_TYPE_END	End marker for action lists. Prevents further processing of actions, thereby ending the list. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_VOID	Used as a placeholder for convenience. It is ignored and simply discarded by PMDs. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_PASSTHRU	Leaves traffic up for additional processing by subsequent flow rules; makes a flow rule non-terminating. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_JUMP	RTE_FLOW_ACTION_TYPE_JUMP Redirects packets to a group on the current device. See struct rte_flow_action_jump.
RTE_FLOW_ACTION_TYPE_MARK	Attaches an integer value to packets and sets PKT_RX_FDIR and PKT_RX_FDIR_ID mbuf flags. See struct rte_flow_action_mark.
RTE_FLOW_ACTION_TYPE_FLAG	Flags packets. Similar to MARK without a specific value; only sets the PKT_RX_FDIR mbuf flag. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_QUEUE	Assigns packets to a given queue index. See struct rte_flow_action_queue.
RTE_FLOW_ACTION_TYPE_DROP	Drops packets. PASSTHRU overrides this action if both are specified. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_COUNT	Enables counters for this flow rule. These counters can be retrieved and reset through rte_flow_query() or rte_flow_shared_action_query() if the action provided via handle, see struct rte_flow_query_count. See struct rte_flow_action_count.
RTE_FLOW_ACTION_TYPE_RSS	Similar to QUEUE, except RSS is additionally performed on packets to spread them among several queues according to the provided parameters. See struct rte_flow_action_rss.
RTE_FLOW_ACTION_TYPE_PF	Directs matching traffic to the physical function (PF) of the current device. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_VF	Directs matching traffic to a given virtual function of the current device. See struct rte_flow_action_vf.
RTE_FLOW_ACTION_TYPE_PHY_PORT	Directs packets to a given physical port index of the underlying device. See struct rte_flow_action_phy_port.
RTE_FLOW_ACTION_TYPE_PORT_ID	Directs matching traffic to a given DPDK port ID. See struct rte_flow_action_port_id.
RTE_FLOW_ACTION_TYPE_METER	Traffic metering and policing (MTR). See struct rte_flow_action_meter. See file rte_mtr.h for MTR object configuration.
RTE_FLOW_ACTION_TYPE_SECURITY	Redirects packets to security engine of current device for security processing as specified by security session. See struct rte_flow_action_security.
RTE_FLOW_ACTION_TYPE_OF_SET_MPLS_TTL	Implements OFPAT_SET_MPLS_TTL ("MPLS TTL") as defined by the OpenFlow Switch Specification. See struct rte_flow_action_of_set_mpls_ttl.
RTE_FLOW_ACTION_TYPE_OF_DEC_MPLS_TTL	Implements OFPAT_DEC_MPLS_TTL ("decrement MPLS TTL") as defined by the OpenFlow Switch Specification. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_OF_SET_NW_TTL	Implements OFPAT_SET_NW_TTL ("IP TTL") as defined by the OpenFlow Switch Specification. See struct rte_flow_action_of_set_nw_ttl.
RTE_FLOW_ACTION_TYPE_OF_DEC_NW_TTL	Implements OFPAT_DEC_NW_TTL ("decrement IP TTL") as defined by the OpenFlow Switch Specification. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_OUT	Implements OFPAT_COPY_TTL_OUT ("copy TTL "outwards" -- from next-to-outermost to outermost") as defined by the OpenFlow Switch Specification. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_IN	Implements OFPAT_COPY_TTL_IN ("copy TTL "inwards" -- from outermost to next-to-outermost") as defined by the OpenFlow Switch Specification. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_OF_POP_VLAN	Implements OFPAT_POP_VLAN ("pop the outer VLAN tag") as defined by the OpenFlow Switch Specification. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN	Implements OFPAT_PUSH_VLAN ("push a new VLAN tag") as defined by the OpenFlow Switch Specification. See struct rte_flow_action_of_push_vlan.
RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID	Implements OFPAT_SET_VLAN_VID ("set the 802.1q VLAN id") as defined by the OpenFlow Switch Specification. See struct rte_flow_action_of_set_vlan_vid.
RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP	Implements OFPAT_SET_LAN_PCP ("set the 802.1q priority") as defined by the OpenFlow Switch Specification. See struct rte_flow_action_of_set_vlan_pcp.
RTE_FLOW_ACTION_TYPE_OF_POP_MPLS	Implements OFPAT_POP_MPLS ("pop the outer MPLS tag") as defined by the OpenFlow Switch Specification. See struct rte_flow_action_of_pop_mpls.
RTE_FLOW_ACTION_TYPE_OF_PUSH_MPLS	Implements OFPAT_PUSH_MPLS ("push a new MPLS tag") as defined by the OpenFlow Switch Specification. See struct rte_flow_action_of_push_mpls.
RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP	Encapsulate flow in VXLAN tunnel as defined in rte_flow_action_vxlan_encap action structure. See struct rte_flow_action_vxlan_encap.
RTE_FLOW_ACTION_TYPE_VXLAN_DECAP	Decapsulate outer most VXLAN tunnel from matched flow. If flow pattern does not define a valid VXLAN tunnel (as specified by RFC7348) then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error.
RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP	Encapsulate flow in NVGRE tunnel defined in the rte_flow_action_nvgre_encap action structure. See struct rte_flow_action_nvgre_encap.
RTE_FLOW_ACTION_TYPE_NVGRE_DECAP	Decapsulate outer most NVGRE tunnel from matched flow. If flow pattern does not define a valid NVGRE tunnel (as specified by RFC7637) then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error.
RTE_FLOW_ACTION_TYPE_RAW_ENCAP	Add outer header whose template is provided in its data buffer See struct rte_flow_action_raw_encap.
RTE_FLOW_ACTION_TYPE_RAW_DECAP	Remove outer header whose template is provided in its data buffer. See struct rte_flow_action_raw_decap
RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC	Modify IPv4 source address in the outermost IPv4 header. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV4, then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_ipv4.
RTE_FLOW_ACTION_TYPE_SET_IPV4_DST	Modify IPv4 destination address in the outermost IPv4 header. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV4, then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_ipv4.
RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC	Modify IPv6 source address in the outermost IPv6 header. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV6, then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_ipv6.
RTE_FLOW_ACTION_TYPE_SET_IPV6_DST	Modify IPv6 destination address in the outermost IPv6 header. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV6, then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_ipv6.
RTE_FLOW_ACTION_TYPE_SET_TP_SRC	Modify source port number in the outermost TCP/UDP header. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_TCP or RTE_FLOW_ITEM_TYPE_UDP, then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_tp.
RTE_FLOW_ACTION_TYPE_SET_TP_DST	Modify destination port number in the outermost TCP/UDP header. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_TCP or RTE_FLOW_ITEM_TYPE_UDP, then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_tp.
RTE_FLOW_ACTION_TYPE_MAC_SWAP	Swap the source and destination MAC addresses in the outermost Ethernet header. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_ETH, then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. No associated configuration structure.
RTE_FLOW_ACTION_TYPE_DEC_TTL	Decrease TTL value directly No associated configuration structure.
RTE_FLOW_ACTION_TYPE_SET_TTL	Set TTL value See struct rte_flow_action_set_ttl
RTE_FLOW_ACTION_TYPE_SET_MAC_SRC	Set source MAC address from matched flow. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_ETH, the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_mac.
RTE_FLOW_ACTION_TYPE_SET_MAC_DST	Set destination MAC address from matched flow. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_ETH, the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_mac.
RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ	Increase sequence number in the outermost TCP header. Action configuration specifies the value to increase TCP sequence number as a big-endian 32 bit integer. conf type: rte_be32_t * Using this action on non-matching traffic will result in undefined behavior.
RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ	Decrease sequence number in the outermost TCP header. Action configuration specifies the value to decrease TCP sequence number as a big-endian 32 bit integer. conf type: rte_be32_t * Using this action on non-matching traffic will result in undefined behavior.
RTE_FLOW_ACTION_TYPE_INC_TCP_ACK	Increase acknowledgment number in the outermost TCP header. Action configuration specifies the value to increase TCP acknowledgment number as a big-endian 32 bit integer. conf type: rte_be32_t * Using this action on non-matching traffic will result in undefined behavior.
RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK	Decrease acknowledgment number in the outermost TCP header. Action configuration specifies the value to decrease TCP acknowledgment number as a big-endian 32 bit integer. conf type: rte_be32_t * Using this action on non-matching traffic will result in undefined behavior.
RTE_FLOW_ACTION_TYPE_SET_TAG	Set Tag. Tag is for internal flow usage only and is not delivered to the application. See struct rte_flow_action_set_tag.
RTE_FLOW_ACTION_TYPE_SET_META	Set metadata on ingress or egress path. See struct rte_flow_action_set_meta.
RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP	Modify IPv4 DSCP in the outermost IP header. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV4, then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_dscp.
RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP	Modify IPv6 DSCP in the outermost IP header. If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV6, then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error. See struct rte_flow_action_set_dscp.
RTE_FLOW_ACTION_TYPE_AGE	Report as aged flow if timeout passed without any matching on the flow. See struct rte_flow_action_age. See function rte_flow_get_aged_flows see enum RTE_ETH_EVENT_FLOW_AGED See struct rte_flow_query_age
RTE_FLOW_ACTION_TYPE_SAMPLE	The matching packets will be duplicated with specified ratio and applied with own set of actions with a fate action. See struct rte_flow_action_sample.
RTE_FLOW_ACTION_TYPE_SHARED	Describe action shared across multiple flow rules. Allow multiple rules reference the same action by handle (see struct rte_flow_shared_action).

Definition at line 1696 of file rte_flow.h.

rte_eth_hash_function

enum rte_eth_hash_function

Hash function types.

Enumerator
RTE_ETH_HASH_FUNCTION_TOEPLITZ	Toeplitz
RTE_ETH_HASH_FUNCTION_SIMPLE_XOR	Simple XOR
RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ	Symmetric Toeplitz: src, dst will be replaced by xor(src, dst). For the case with src/dst only, src or dst address will xor with zero pair.

Definition at line 2328 of file rte_flow.h.

rte_flow_error_type

enum rte_flow_error_type

Verbose error types.

Most of them provide the type of the object referenced by struct rte_flow_error.cause.

Enumerator
RTE_FLOW_ERROR_TYPE_NONE	No error.
RTE_FLOW_ERROR_TYPE_UNSPECIFIED	Cause unspecified.
RTE_FLOW_ERROR_TYPE_HANDLE	Flow rule (handle).
RTE_FLOW_ERROR_TYPE_ATTR_GROUP	Group field.
RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY	Priority field.
RTE_FLOW_ERROR_TYPE_ATTR_INGRESS	Ingress field.
RTE_FLOW_ERROR_TYPE_ATTR_EGRESS	Egress field.
RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER	Transfer field.
RTE_FLOW_ERROR_TYPE_ATTR	Attributes structure.
RTE_FLOW_ERROR_TYPE_ITEM_NUM	Pattern length.
RTE_FLOW_ERROR_TYPE_ITEM_SPEC	Item specification.
RTE_FLOW_ERROR_TYPE_ITEM_LAST	Item specification range.
RTE_FLOW_ERROR_TYPE_ITEM_MASK	Item specification mask.
RTE_FLOW_ERROR_TYPE_ITEM	Specific pattern item.
RTE_FLOW_ERROR_TYPE_ACTION_NUM	Number of actions.
RTE_FLOW_ERROR_TYPE_ACTION_CONF	Action configuration.
RTE_FLOW_ERROR_TYPE_ACTION	Specific action.

Definition at line 2870 of file rte_flow.h.

rte_flow_conv_op

enum rte_flow_conv_op

Conversion operations for flow API objects.

See also

rte_flow_conv()

Enumerator
RTE_FLOW_CONV_OP_NONE	No operation to perform. rte_flow_conv() simply returns 0.
RTE_FLOW_CONV_OP_ATTR	Convert attributes structure. This is a basic copy of an attributes structure. src type: const struct rte_flow_attr * dst type: struct rte_flow_attr *
RTE_FLOW_CONV_OP_ITEM	Convert a single item. Duplicates spec, last and mask but not outside objects. src type: const struct rte_flow_item * dst type: struct rte_flow_item *
RTE_FLOW_CONV_OP_ACTION	Convert a single action. Duplicates conf but not outside objects. src type: const struct rte_flow_action * dst type: struct rte_flow_action *
RTE_FLOW_CONV_OP_PATTERN	Convert an entire pattern. Duplicates all pattern items at once with the same constraints as RTE_FLOW_CONV_OP_ITEM. src type: const struct rte_flow_item * dst type: struct rte_flow_item *
RTE_FLOW_CONV_OP_ACTIONS	Convert a list of actions. Duplicates the entire list of actions at once with the same constraints as RTE_FLOW_CONV_OP_ACTION. src type: const struct rte_flow_action * dst type: struct rte_flow_action *
RTE_FLOW_CONV_OP_RULE	Convert a complete flow rule description. Comprises attributes, pattern and actions together at once with the usual constraints. src type: const struct rte_flow_conv_rule * dst type: struct rte_flow_conv_rule *
RTE_FLOW_CONV_OP_ITEM_NAME	Convert item type to its name string. Writes a NUL-terminated string to dst. Like snprintf(), the returned value excludes the terminator which is always written nonetheless. src type: (const void *)enum rte_flow_item_type dst type: char *
RTE_FLOW_CONV_OP_ACTION_NAME	Convert action type to its name string. Writes a NUL-terminated string to dst. Like snprintf(), the returned value excludes the terminator which is always written nonetheless. src type: (const void *)enum rte_flow_action_type dst type: char *
RTE_FLOW_CONV_OP_ITEM_NAME_PTR	Convert item type to pointer to item name. Retrieves item name pointer from its type. The string itself is not copied; instead, a unique pointer to an internal static constant storage is written to dst. src type: (const void *)enum rte_flow_item_type dst type: const char **
RTE_FLOW_CONV_OP_ACTION_NAME_PTR	Convert action type to pointer to action name. Retrieves action name pointer from its type. The string itself is not copied; instead, a unique pointer to an internal static constant storage is written to dst. src type: (const void *)enum rte_flow_action_type dst type: const char **

Definition at line 2936 of file rte_flow.h.

Function Documentation

rte_flow_dev_dump()

__rte_experimental int rte_flow_dev_dump	(	uint16_t	port_id,
		FILE *	file,
		struct rte_flow_error *	error
	)

Warning

EXPERIMENTAL: this API may change without prior notice.

Dump hardware internal representation information of rte flow to file.

Parameters

[in]	port_id	The port identifier of the Ethernet device.
[in]	file	A pointer to a file for output.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns

0 on success, a negative value otherwise.

rte_flow_dynf_metadata_avail()

static __rte_experimental int rte_flow_dynf_metadata_avail ( void  )

inlinestatic

Check if mbuf dynamic field for metadata is registered.

Returns

True if registered, false otherwise.

Definition at line 3105 of file rte_flow.h.

rte_flow_dynf_metadata_register()

__rte_experimental int rte_flow_dynf_metadata_register

(

void

)

Register mbuf dynamic field and flag for metadata.

This function must be called prior to use SET_META action in order to register the dynamic mbuf field. Otherwise, the data cannot be delivered to application.

Returns

0 on success, a negative errno value otherwise and rte_errno is set.

rte_flow_validate()

int rte_flow_validate	(	uint16_t	port_id,
		const struct rte_flow_attr *	attr,
		const struct rte_flow_item	pattern[],
		const struct rte_flow_action	actions[],
		struct rte_flow_error *	error
	)

Check whether a flow rule can be created on a given port.

The flow rule is validated for correctness and whether it could be accepted by the device given sufficient resources. The rule is checked against the current device mode and queue configuration. The flow rule may also optionally be validated against existing flow rules and device resources. This function has no effect on the target device.

The returned value is guaranteed to remain valid only as long as no successful calls to rte_flow_create() or rte_flow_destroy() are made in the meantime and no device parameter affecting flow rules in any way are modified, due to possible collisions or resource limitations (although in such cases EINVAL should not be returned).

Parameters

	port_id	Port identifier of Ethernet device.
[in]	attr	Flow rule attributes.
[in]	pattern	Pattern specification (list terminated by the END pattern item).
[in]	actions	Associated actions (list terminated by the END action).
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns

0 if flow rule is valid and can be created. A negative errno value otherwise (rte_errno is also set), the following errors are defined:

-ENOSYS: underlying device does not support this functionality.

-EIO: underlying device is removed.

-EINVAL: unknown or invalid rule specification.

-ENOTSUP: valid but unsupported rule specification (e.g. partial bit-masks are unsupported).

-EEXIST: collision with an existing rule. Only returned if device supports flow rule collision checking and there was a flow rule collision. Not receiving this return code is no guarantee that creating the rule will not fail due to a collision.

-ENOMEM: not enough memory to execute the function, or if the device supports resource validation, resource limitation on the device.

-EBUSY: action cannot be performed due to busy device resources, may succeed if the affected queues or even the entire port are in a stopped state (see rte_eth_dev_rx_queue_stop() and rte_eth_dev_stop()).

Examples:

examples/flow_filtering/flow_blocks.c, examples/ipsec-secgw/flow.c, examples/ipsec-secgw/ipsec-secgw.c, and examples/ipsec-secgw/ipsec.c.

rte_flow_create()

struct rte_flow* rte_flow_create	(	uint16_t	port_id,
		const struct rte_flow_attr *	attr,
		const struct rte_flow_item	pattern[],
		const struct rte_flow_action	actions[],
		struct rte_flow_error *	error
	)

Create a flow rule on a given port.

Parameters

	port_id	Port identifier of Ethernet device.
[in]	attr	Flow rule attributes.
[in]	pattern	Pattern specification (list terminated by the END pattern item).
[in]	actions	Associated actions (list terminated by the END action).
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns

A valid handle in case of success, NULL otherwise and rte_errno is set to the positive version of one of the error codes defined for rte_flow_validate().

Examples:

examples/flow_filtering/flow_blocks.c, examples/ipsec-secgw/flow.c, examples/ipsec-secgw/ipsec-secgw.c, and examples/ipsec-secgw/ipsec.c.

rte_flow_destroy()

int rte_flow_destroy	(	uint16_t	port_id,
		struct rte_flow *	flow,
		struct rte_flow_error *	error
	)

Destroy a flow rule on a given port.

Failure to destroy a flow rule handle may occur when other flow rules depend on it, and destroying it would result in an inconsistent state.

This function is only guaranteed to succeed if handles are destroyed in reverse order of their creation.

Parameters

	port_id	Port identifier of Ethernet device.
	flow	Flow rule handle to destroy.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns

0 on success, a negative errno value otherwise and rte_errno is set.

Examples:

examples/ipsec-secgw/ipsec-secgw.c.

rte_flow_flush()

int rte_flow_flush	(	uint16_t	port_id,
		struct rte_flow_error *	error
	)

Destroy all flow rules associated with a port.

In the unlikely event of failure, handles are still considered destroyed and no longer valid but the port must be assumed to be in an inconsistent state.

Parameters

	port_id	Port identifier of Ethernet device.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns

0 on success, a negative errno value otherwise and rte_errno is set.

Examples:

examples/flow_filtering/main.c.

rte_flow_query()

int rte_flow_query	(	uint16_t	port_id,
		struct rte_flow *	flow,
		const struct rte_flow_action *	action,
		void *	data,
		struct rte_flow_error *	error
	)

Query an existing flow rule.

This function allows retrieving flow-specific data such as counters. Data is gathered by special actions which must be present in the flow rule definition.

See also

RTE_FLOW_ACTION_TYPE_COUNT

Parameters

	port_id	Port identifier of Ethernet device.
	flow	Flow rule handle to query.
	action	Action definition as defined in original flow rule.
[in,out]	data	Pointer to storage for the associated query data type.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns

0 on success, a negative errno value otherwise and rte_errno is set.

rte_flow_isolate()

int rte_flow_isolate	(	uint16_t	port_id,
		int	set,
		struct rte_flow_error *	error
	)

Restrict ingress traffic to the defined flow rules.

Isolated mode guarantees that all ingress traffic comes from defined flow rules only (current and future).

Besides making ingress more deterministic, it allows PMDs to safely reuse resources otherwise assigned to handle the remaining traffic, such as global RSS configuration settings, VLAN filters, MAC address entries, legacy filter API rules and so on in order to expand the set of possible flow rule types.

Calling this function as soon as possible after device initialization, ideally before the first call to rte_eth_dev_configure(), is recommended to avoid possible failures due to conflicting settings.

Once effective, leaving isolated mode may not be possible depending on PMD implementation.

Additionally, the following functionality has no effect on the underlying port and may return errors such as ENOTSUP ("not supported"):

• Toggling promiscuous mode.
• Toggling allmulticast mode.
• Configuring MAC addresses.
• Configuring multicast addresses.
• Configuring VLAN filters.
• Configuring Rx filters through the legacy API (e.g. FDIR).
• Configuring global RSS settings.

Parameters

	port_id	Port identifier of Ethernet device.
	set	Nonzero to enter isolated mode, attempt to leave it otherwise.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns

0 on success, a negative errno value otherwise and rte_errno is set.

rte_flow_error_set()

int rte_flow_error_set	(	struct rte_flow_error *	error,
		int	code,
		enum rte_flow_error_type	type,
		const void *	cause,
		const char *	message
	)

Initialize flow error structure.

Parameters

[out]	error	Pointer to flow error structure (may be NULL).
	code	Related error code (rte_errno).
	type	Cause field and error types.
	cause	Object responsible for the error.
	message	Human-readable error message.

Returns

Negative error code (errno value) and rte_errno is set.

rte_flow_copy()

__rte_deprecated size_t rte_flow_copy	(	struct rte_flow_desc *	fd,
		size_t	len,
		const struct rte_flow_attr *	attr,
		const struct rte_flow_item *	items,
		const struct rte_flow_action *	actions
	)

Deprecated:

Copy an rte_flow rule description.

This interface is kept for compatibility with older applications but is implemented as a wrapper to rte_flow_conv(). It is deprecated due to its lack of flexibility and reliance on a type unusable with C++ programs (struct rte_flow_desc).

Parameters

[in]	fd	Flow rule description.
[in]	len	Total size of allocated data for the flow description.
[in]	attr	Flow rule attributes.
[in]	items	Pattern specification (list terminated by the END pattern item).
[in]	actions	Associated actions (list terminated by the END action).

Returns

If len is greater or equal to the size of the flow, the total size of the flow description and its data. If len is lower than the size of the flow, the number of bytes that would have been written to desc had it been sufficient. Nothing is written.

rte_flow_conv()

__rte_experimental int rte_flow_conv	(	enum rte_flow_conv_op	op,
		void *	dst,
		size_t	size,
		const void *	src,
		struct rte_flow_error *	error
	)

Flow object conversion helper.

This function performs conversion of various flow API objects to a pre-allocated destination buffer. See enum rte_flow_conv_op for possible operations and details about each of them.

Since destination buffer must be large enough, it works in a manner reminiscent of snprintf():

• If size is 0, dst may be a NULL pointer, otherwise dst must be non-NULL.
• If positive, the returned value represents the number of bytes needed to store the conversion of src to dst according to op regardless of the size parameter.
• Since no more than size bytes can be written to dst, output is truncated and may be inconsistent when the returned value is larger than that.
• In case of conversion error, a negative error code is returned and dst contents are unspecified.

Parameters

	op	Operation to perform, related to the object type of dst.
[out]	dst	Destination buffer address. Must be suitably aligned by the caller.
	size	Destination buffer size in bytes.
[in]	src	Source object to copy. Depending on op, its type may differ from that of dst.
[out]	error	Perform verbose error reporting if not NULL. Initialized in case of error only.

Returns

The number of bytes required to convert src to dst on success, a negative errno value otherwise and rte_errno is set.

See also

rte_flow_conv_op

rte_flow_get_aged_flows()

__rte_experimental int rte_flow_get_aged_flows	(	uint16_t	port_id,
		void **	contexts,
		uint32_t	nb_contexts,
		struct rte_flow_error *	error
	)

Get aged-out flows of a given port.

RTE_ETH_EVENT_FLOW_AGED event will be triggered when at least one new aged out flow was detected after the last call to rte_flow_get_aged_flows. This function can be called to get the aged flows asynchronously from the event callback or synchronously regardless the event. This is not safe to call rte_flow_get_aged_flows function with other flow functions from multiple threads simultaneously.

Parameters

	port_id	Port identifier of Ethernet device.
[in,out]	contexts	The address of an array of pointers to the aged-out flows contexts.
[in]	nb_contexts	The length of context array pointers.
[out]	error	Perform verbose error reporting if not NULL. Initialized in case of error only.

Returns

if nb_contexts is 0, return the amount of all aged contexts. if nb_contexts is not 0 , return the amount of aged flows reported in the context array, otherwise negative errno value.

See also

rte_flow_action_age

RTE_ETH_EVENT_FLOW_AGED

rte_flow_shared_action_create()

__rte_experimental struct rte_flow_shared_action* rte_flow_shared_action_create	(	uint16_t	port_id,
		const struct rte_flow_shared_action_conf *	conf,
		const struct rte_flow_action *	action,
		struct rte_flow_error *	error
	)

Warning

EXPERIMENTAL: this API may change without prior notice.

Create shared action for reuse in multiple flow rules. The created shared action has single state and configuration across all flow rules using it.

Parameters

[in]	port_id	The port identifier of the Ethernet device.
[in]	conf	Shared action configuration.
[in]	action	Action configuration for shared action creation.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns

A valid handle in case of success, NULL otherwise and rte_errno is set to one of the error codes defined:

• (ENODEV) if port_id invalid.
• (ENOSYS) if underlying device does not support this functionality.
• (EIO) if underlying device is removed.
• (EINVAL) if action invalid.
• (ENOTSUP) if action valid but unsupported.

rte_flow_shared_action_destroy()

__rte_experimental int rte_flow_shared_action_destroy	(	uint16_t	port_id,
		struct rte_flow_shared_action *	action,
		struct rte_flow_error *	error
	)

Warning

EXPERIMENTAL: this API may change without prior notice.

Destroy the shared action by handle.

Parameters

[in]	port_id	The port identifier of the Ethernet device.
[in]	action	Handle for the shared action to be destroyed.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns

• (0) if success.
• (-ENODEV) if port_id invalid.
• (-ENOSYS) if underlying device does not support this functionality.
• (-EIO) if underlying device is removed.
• (-ENOENT) if action pointed by action handle was not found.
• (-EBUSY) if action pointed by action handle still used by some rules rte_errno is also set.

rte_flow_shared_action_update()

__rte_experimental int rte_flow_shared_action_update	(	uint16_t	port_id,
		struct rte_flow_shared_action *	action,
		const struct rte_flow_action *	update,
		struct rte_flow_error *	error
	)

Warning

EXPERIMENTAL: this API may change without prior notice.

Update in-place the shared action configuration pointed by action handle with the configuration provided as update argument. The update of the shared action configuration effects all flow rules reusing the action via handle.

Parameters

[in]	port_id	The port identifier of the Ethernet device.
[in]	action	Handle for the shared action to be updated.
[in]	update	Action specification used to modify the action pointed by handle. update should be of same type with the action pointed by the action handle argument, otherwise considered as invalid.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns

• (0) if success.
• (-ENODEV) if port_id invalid.
• (-ENOSYS) if underlying device does not support this functionality.
• (-EIO) if underlying device is removed.
• (-EINVAL) if update invalid.
• (-ENOTSUP) if update valid but unsupported.
• (-ENOENT) if action pointed by ctx was not found. rte_errno is also set.

rte_flow_shared_action_query()

__rte_experimental int rte_flow_shared_action_query	(	uint16_t	port_id,
		const struct rte_flow_shared_action *	action,
		void *	data,
		struct rte_flow_error *	error
	)

Warning

EXPERIMENTAL: this API may change without prior notice.

Query the shared action by handle.

Retrieve action-specific data such as counters. Data is gathered by special action which may be present/referenced in more than one flow rule definition.

See also

RTE_FLOW_ACTION_TYPE_COUNT

Parameters

	port_id	Port identifier of Ethernet device.
[in]	action	Handle for the shared action to query.
[in,out]	data	Pointer to storage for the associated query data type.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns

0 on success, a negative errno value otherwise and rte_errno is set.

rte_flow_tunnel_decap_set()

__rte_experimental int rte_flow_tunnel_decap_set	(	uint16_t	port_id,
		struct rte_flow_tunnel *	tunnel,
		struct rte_flow_action **	actions,
		uint32_t *	num_of_actions,
		struct rte_flow_error *	error
	)

Allocate an array of actions to be used in rte_flow_create, to implement tunnel-decap-set for the given tunnel. Sample usage: actions vxlan_decap / tunnel-decap-set(tunnel properties) / jump group 0 / end

Parameters

	port_id	Port identifier of Ethernet device.
[in]	tunnel	Tunnel properties.
[out]	actions	Array of actions to be allocated by the PMD. This array should be concatenated with the actions array provided to rte_flow_create.
[out]	num_of_actions	Number of actions allocated.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns

0 on success, a negative errno value otherwise and rte_errno is set.

rte_flow_tunnel_match()

__rte_experimental int rte_flow_tunnel_match	(	uint16_t	port_id,
		struct rte_flow_tunnel *	tunnel,
		struct rte_flow_item **	items,
		uint32_t *	num_of_items,
		struct rte_flow_error *	error
	)

Allocate an array of items to be used in rte_flow_create, to implement tunnel-match for the given tunnel. Sample usage: pattern tunnel-match(tunnel properties) / outer-header-matches / inner-header-matches / end

Parameters

	port_id	Port identifier of Ethernet device.
[in]	tunnel	Tunnel properties.
[out]	items	Array of items to be allocated by the PMD. This array should be concatenated with the items array provided to rte_flow_create.
[out]	num_of_items	Number of items allocated.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns

0 on success, a negative errno value otherwise and rte_errno is set.

rte_flow_get_restore_info()

__rte_experimental int rte_flow_get_restore_info	(	uint16_t	port_id,
		struct rte_mbuf *	m,
		struct rte_flow_restore_info *	info,
		struct rte_flow_error *	error
	)

Populate the current packet processing state, if exists, for the given mbuf.

Parameters

	port_id	Port identifier of Ethernet device.
[in]	m	Mbuf struct.
[out]	info	Restore information. Upon success contains the HW state.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns

0 on success, a negative errno value otherwise and rte_errno is set.

rte_flow_tunnel_action_decap_release()

__rte_experimental int rte_flow_tunnel_action_decap_release	(	uint16_t	port_id,
		struct rte_flow_action *	actions,
		uint32_t	num_of_actions,
		struct rte_flow_error *	error
	)

Release the action array as allocated by rte_flow_tunnel_decap_set.

Parameters

	port_id	Port identifier of Ethernet device.
[in]	actions	Array of actions to be released.
[in]	num_of_actions	Number of elements in actions array.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns

0 on success, a negative errno value otherwise and rte_errno is set.

rte_flow_tunnel_item_release()

__rte_experimental int rte_flow_tunnel_item_release	(	uint16_t	port_id,
		struct rte_flow_item *	items,
		uint32_t	num_of_items,
		struct rte_flow_error *	error
	)

Release the item array as allocated by rte_flow_tunnel_match.

Parameters

	port_id	Port identifier of Ethernet device.
[in]	items	Array of items to be released.
[in]	num_of_items	Number of elements in item array.
[out]	error	Perform verbose error reporting if not NULL. PMDs initialize this structure in case of error only.

Returns

0 on success, a negative errno value otherwise and rte_errno is set.

Variable Documentation

rte_flow_item_higig2_hdr_mask

const struct rte_flow_item_higig2_hdr rte_flow_item_higig2_hdr_mask

static

Initial value:

= {
    .hdr = {
        .ppt1 = {
            .classification = 0xffff,
            .vid = 0xfff,
        },
    },
}

Default mask for RTE_FLOW_ITEM_TYPE_HIGIG2.

Definition at line 560 of file rte_flow.h.

rte_flow_item_any_mask

const struct rte_flow_item_any rte_flow_item_any_mask

static

Initial value:

= {
    .num = 0x00000000,
}

Default mask for RTE_FLOW_ITEM_TYPE_ANY.

Definition at line 587 of file rte_flow.h.

rte_flow_item_vf_mask

const struct rte_flow_item_vf rte_flow_item_vf_mask

static

Initial value:

= {
    .id = 0x00000000,
}

Default mask for RTE_FLOW_ITEM_TYPE_VF.

Definition at line 616 of file rte_flow.h.

rte_flow_item_phy_port_mask

const struct rte_flow_item_phy_port rte_flow_item_phy_port_mask

static

Initial value:

= {
    .index = 0x00000000,
}

Default mask for RTE_FLOW_ITEM_TYPE_PHY_PORT.

Definition at line 647 of file rte_flow.h.

rte_flow_item_port_id_mask

const struct rte_flow_item_port_id rte_flow_item_port_id_mask

static

Initial value:

= {
    .id = 0xffffffff,
}

Default mask for RTE_FLOW_ITEM_TYPE_PORT_ID.

Definition at line 673 of file rte_flow.h.

rte_flow_item_raw_mask

const struct rte_flow_item_raw rte_flow_item_raw_mask

static

Initial value:

= {
    .relative = 1,
    .search = 1,
    .reserved = 0x3fffffff,
    .offset = 0xffffffff,
    .limit = 0xffff,
    .length = 0xffff,
    .pattern = NULL,
}

Default mask for RTE_FLOW_ITEM_TYPE_RAW.

Definition at line 708 of file rte_flow.h.

rte_flow_item_eth_mask

const struct rte_flow_item_eth rte_flow_item_eth_mask

static

Initial value:

= {
    .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
    .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
    .type = RTE_BE16(0x0000),
}

Default mask for RTE_FLOW_ITEM_TYPE_ETH.

Definition at line 746 of file rte_flow.h.

rte_flow_item_vlan_mask

const struct rte_flow_item_vlan rte_flow_item_vlan_mask

static

Initial value:

= {
    .tci = RTE_BE16(0x0fff),
    .inner_type = RTE_BE16(0x0000),
}

Default mask for RTE_FLOW_ITEM_TYPE_VLAN.

Definition at line 778 of file rte_flow.h.

rte_flow_item_ipv4_mask

const struct rte_flow_item_ipv4 rte_flow_item_ipv4_mask

static

Initial value:

= {
    .hdr = {
        .src_addr = RTE_BE32(0xffffffff),
        .dst_addr = RTE_BE32(0xffffffff),
    },
}

Default mask for RTE_FLOW_ITEM_TYPE_IPV4.

Examples:

examples/ipsec-secgw/flow.c, and examples/ipsec-secgw/ipsec.c.

Definition at line 797 of file rte_flow.h.

rte_flow_item_ipv6_mask

const struct rte_flow_item_ipv6 rte_flow_item_ipv6_mask

static

Initial value:

= {
    .hdr = {
        .src_addr =
            "\xff\xff\xff\xff\xff\xff\xff\xff"
            "\xff\xff\xff\xff\xff\xff\xff\xff",
        .dst_addr =
            "\xff\xff\xff\xff\xff\xff\xff\xff"
            "\xff\xff\xff\xff\xff\xff\xff\xff",
    },
}

Default mask for RTE_FLOW_ITEM_TYPE_IPV6.

Examples:

examples/ipsec-secgw/flow.c, and examples/ipsec-secgw/ipsec.c.

Definition at line 838 of file rte_flow.h.

rte_flow_item_icmp_mask

const struct rte_flow_item_icmp rte_flow_item_icmp_mask

static

Initial value:

= {
    .hdr = {
        .icmp_type = 0xff,
        .icmp_code = 0xff,
    },
}

Default mask for RTE_FLOW_ITEM_TYPE_ICMP.

Definition at line 861 of file rte_flow.h.

rte_flow_item_udp_mask

const struct rte_flow_item_udp rte_flow_item_udp_mask

static

Initial value:

= {
    .hdr = {
        .src_port = RTE_BE16(0xffff),
        .dst_port = RTE_BE16(0xffff),
    },
}

Default mask for RTE_FLOW_ITEM_TYPE_UDP.

Definition at line 880 of file rte_flow.h.

rte_flow_item_tcp_mask

const struct rte_flow_item_tcp rte_flow_item_tcp_mask

static

Initial value:

= {
    .hdr = {
        .src_port = RTE_BE16(0xffff),
        .dst_port = RTE_BE16(0xffff),
    },
}

Default mask for RTE_FLOW_ITEM_TYPE_TCP.

Definition at line 899 of file rte_flow.h.

rte_flow_item_sctp_mask

const struct rte_flow_item_sctp rte_flow_item_sctp_mask

static

Initial value:

= {
    .hdr = {
        .src_port = RTE_BE16(0xffff),
        .dst_port = RTE_BE16(0xffff),
    },
}

Default mask for RTE_FLOW_ITEM_TYPE_SCTP.

Definition at line 918 of file rte_flow.h.

rte_flow_item_vxlan_mask

const struct rte_flow_item_vxlan rte_flow_item_vxlan_mask

static

Initial value:

= {
    .vni = "\xff\xff\xff",
}

Default mask for RTE_FLOW_ITEM_TYPE_VXLAN.

Definition at line 940 of file rte_flow.h.

rte_flow_item_e_tag_mask

const struct rte_flow_item_e_tag rte_flow_item_e_tag_mask

static

Initial value:

= {
    .rsvd_grp_ecid_b = RTE_BE16(0x3fff),
}

Default mask for RTE_FLOW_ITEM_TYPE_E_TAG.

Definition at line 968 of file rte_flow.h.

rte_flow_item_nvgre_mask

const struct rte_flow_item_nvgre rte_flow_item_nvgre_mask

static

Initial value:

= {
    .tni = "\xff\xff\xff",
}

Default mask for RTE_FLOW_ITEM_TYPE_NVGRE.

Definition at line 993 of file rte_flow.h.

rte_flow_item_mpls_mask

const struct rte_flow_item_mpls rte_flow_item_mpls_mask

static

Initial value:

= {
    .label_tc_s = "\xff\xff\xf0",
}

Default mask for RTE_FLOW_ITEM_TYPE_MPLS.

Definition at line 1013 of file rte_flow.h.

rte_flow_item_gre_mask

const struct rte_flow_item_gre rte_flow_item_gre_mask

static

Initial value:

= {
    .protocol = RTE_BE16(0xffff),
}

Default mask for RTE_FLOW_ITEM_TYPE_GRE.

Definition at line 1034 of file rte_flow.h.

rte_flow_item_fuzzy_mask

const struct rte_flow_item_fuzzy rte_flow_item_fuzzy_mask

static

Initial value:

= {
    .thresh = 0xffffffff,
}

Default mask for RTE_FLOW_ITEM_TYPE_FUZZY.

Definition at line 1062 of file rte_flow.h.

rte_flow_item_gtp_mask

const struct rte_flow_item_gtp rte_flow_item_gtp_mask

static

Initial value:

= {
    .teid = RTE_BE32(0xffffffff),
}

Default mask for RTE_FLOW_ITEM_TYPE_GTP.

Definition at line 1087 of file rte_flow.h.

rte_flow_item_esp_mask

const struct rte_flow_item_esp rte_flow_item_esp_mask

static

Initial value:

= {
    .hdr = {
        .spi = RTE_BE32(0xffffffff),
    },
}

Default mask for RTE_FLOW_ITEM_TYPE_ESP.

Examples:

examples/ipsec-secgw/ipsec.c.

Definition at line 1103 of file rte_flow.h.

rte_flow_item_geneve_mask

const struct rte_flow_item_geneve rte_flow_item_geneve_mask

static

Initial value:

= {
    .vni = "\xff\xff\xff",
}

Default mask for RTE_FLOW_ITEM_TYPE_GENEVE.

Definition at line 1128 of file rte_flow.h.

rte_flow_item_vxlan_gpe_mask

const struct rte_flow_item_vxlan_gpe rte_flow_item_vxlan_gpe_mask

static

Initial value:

= {
    .vni = "\xff\xff\xff",
}

Default mask for RTE_FLOW_ITEM_TYPE_VXLAN_GPE.

Definition at line 1148 of file rte_flow.h.

rte_flow_item_arp_eth_ipv4_mask

const struct rte_flow_item_arp_eth_ipv4 rte_flow_item_arp_eth_ipv4_mask

static

Initial value:

= {
    .sha.addr_bytes = "\xff\xff\xff\xff\xff\xff",
    .spa = RTE_BE32(0xffffffff),
    .tha.addr_bytes = "\xff\xff\xff\xff\xff\xff",
    .tpa = RTE_BE32(0xffffffff),
}

Default mask for RTE_FLOW_ITEM_TYPE_ARP_ETH_IPV4.

Definition at line 1173 of file rte_flow.h.

rte_flow_item_ipv6_ext_mask

const struct rte_flow_item_ipv6_ext rte_flow_item_ipv6_ext_mask

static

Initial value:

= {
    .next_hdr = 0xff,
}

Default mask for RTE_FLOW_ITEM_TYPE_IPV6_EXT.

Definition at line 1198 of file rte_flow.h.

rte_flow_item_icmp6_mask

const struct rte_flow_item_icmp6 rte_flow_item_icmp6_mask

static

Initial value:

= {
    .type = 0xff,
    .code = 0xff,
}

Default mask for RTE_FLOW_ITEM_TYPE_ICMP6.

Definition at line 1230 of file rte_flow.h.

rte_flow_item_icmp6_nd_ns_mask

const struct rte_flow_item_icmp6_nd_ns rte_flow_item_icmp6_nd_ns_mask

static

Initial value:

= {
    .target_addr =
        "\xff\xff\xff\xff\xff\xff\xff\xff"
        "\xff\xff\xff\xff\xff\xff\xff\xff",
}

Default mask for RTE_FLOW_ITEM_TYPE_ICMP6_ND_NS.

Definition at line 1252 of file rte_flow.h.

rte_flow_item_icmp6_nd_na_mask

const struct rte_flow_item_icmp6_nd_na rte_flow_item_icmp6_nd_na_mask

static

Initial value:

= {
    .target_addr =
        "\xff\xff\xff\xff\xff\xff\xff\xff"
        "\xff\xff\xff\xff\xff\xff\xff\xff",
}

Default mask for RTE_FLOW_ITEM_TYPE_ICMP6_ND_NA.

Definition at line 1279 of file rte_flow.h.

rte_flow_item_icmp6_nd_opt_mask

const struct rte_flow_item_icmp6_nd_opt rte_flow_item_icmp6_nd_opt_mask

static

Initial value:

= {
    .type = 0xff,
}

Default mask for RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT.

Definition at line 1305 of file rte_flow.h.

rte_flow_item_icmp6_nd_opt_sla_eth_mask

const struct rte_flow_item_icmp6_nd_opt_sla_eth rte_flow_item_icmp6_nd_opt_sla_eth_mask

static

Initial value:

= {
    .sla.addr_bytes = "\xff\xff\xff\xff\xff\xff",
}

Default mask for RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT_SLA_ETH.

Definition at line 1330 of file rte_flow.h.

rte_flow_item_icmp6_nd_opt_tla_eth_mask

const struct rte_flow_item_icmp6_nd_opt_tla_eth rte_flow_item_icmp6_nd_opt_tla_eth_mask

static

Initial value:

= {
    .tla.addr_bytes = "\xff\xff\xff\xff\xff\xff",
}

Default mask for RTE_FLOW_ITEM_TYPE_ICMP6_ND_OPT_TLA_ETH.

Definition at line 1355 of file rte_flow.h.

rte_flow_item_meta_mask

const struct rte_flow_item_meta rte_flow_item_meta_mask

static

Initial value:

= {
    .data = UINT32_MAX,
}

Default mask for RTE_FLOW_ITEM_TYPE_META.

Definition at line 1376 of file rte_flow.h.

rte_flow_item_gtp_psc_mask

const struct rte_flow_item_gtp_psc rte_flow_item_gtp_psc_mask

static

Initial value:

= {
    .qfi = 0xff,
}

Default mask for RTE_FLOW_ITEM_TYPE_GTP_PSC.

Definition at line 1394 of file rte_flow.h.

rte_flow_item_pppoe_proto_id_mask

const struct rte_flow_item_pppoe_proto_id rte_flow_item_pppoe_proto_id_mask

static

Initial value:

= {
    .proto_id = RTE_BE16(0xffff),
}

Default mask for RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID.

Definition at line 1433 of file rte_flow.h.

rte_flow_item_tag_mask

const struct rte_flow_item_tag rte_flow_item_tag_mask

static

Initial value:

= {
    .data = 0xffffffff,
    .index = 0xff,
}

Default mask for RTE_FLOW_ITEM_TYPE_TAG.

Definition at line 1453 of file rte_flow.h.

rte_flow_item_l2tpv3oip_mask

const struct rte_flow_item_l2tpv3oip rte_flow_item_l2tpv3oip_mask

static

Initial value:

= {
    .session_id = RTE_BE32(UINT32_MAX),
}

Default mask for RTE_FLOW_ITEM_TYPE_L2TPV3OIP.

Definition at line 1470 of file rte_flow.h.

rte_flow_item_mark_mask

const struct rte_flow_item_mark rte_flow_item_mark_mask

static

Initial value:

= {
    .id = 0xffffffff,
}

Default mask for RTE_FLOW_ITEM_TYPE_MARK.

Definition at line 1500 of file rte_flow.h.

rte_flow_item_nsh_mask

const struct rte_flow_item_nsh rte_flow_item_nsh_mask

static

Initial value:

= {
    .mdtype = 0xf,
    .next_proto = 0xff,
    .spi = 0xffffff,
    .sindex = 0xff,
}

Default mask for RTE_FLOW_ITEM_TYPE_NSH.

Definition at line 1529 of file rte_flow.h.

rte_flow_item_igmp_mask

const struct rte_flow_item_igmp rte_flow_item_igmp_mask

static

Initial value:

= {
    .group_addr = 0xffffffff,
}

Default mask for RTE_FLOW_ITEM_TYPE_IGMP.

Definition at line 1555 of file rte_flow.h.

rte_flow_item_ah_mask

const struct rte_flow_item_ah rte_flow_item_ah_mask

static

Initial value:

= {
    .spi = 0xffffffff,
}

Default mask for RTE_FLOW_ITEM_TYPE_AH.

Definition at line 1579 of file rte_flow.h.

rte_flow_item_pfcp_mask

const struct rte_flow_item_pfcp rte_flow_item_pfcp_mask

static

Initial value:

= {
    .s_field = 0x01,
    .seid = RTE_BE64(UINT64_C(0xffffffffffffffff)),
}

Default mask for RTE_FLOW_ITEM_TYPE_PFCP.

Definition at line 1601 of file rte_flow.h.

rte_flow_item_ecpri_mask

const struct rte_flow_item_ecpri rte_flow_item_ecpri_mask

static

Initial value:

= {
    .hdr = {
        .common = {
            .u32 = 0x0,
        },
    },
}

Default mask for RTE_FLOW_ITEM_TYPE_ECPRI.

Definition at line 1621 of file rte_flow.h.