#include <rte_common.h>
#include <rte_memory.h>
#include <rte_errno.h>

Data Structures
struct	rte_rawdev_xstats_name

Macros
#define	RTE_RAW_DEV_XSTATS_NAME_SIZE 64

Functions
uint8_t	rte_rawdev_count (void)

uint16_t	rte_rawdev_get_dev_id (const char *name)

int	rte_rawdev_socket_id (uint16_t dev_id)

int	rte_rawdev_info_get (uint16_t dev_id, struct rte_rawdev_info *dev_info)

int	rte_rawdev_configure (uint16_t dev_id, struct rte_rawdev_info *dev_conf)

int	rte_rawdev_queue_conf_get (uint16_t dev_id, uint16_t queue_id, rte_rawdev_obj_t queue_conf)

int	rte_rawdev_queue_setup (uint16_t dev_id, uint16_t queue_id, rte_rawdev_obj_t queue_conf)

int	rte_rawdev_queue_release (uint16_t dev_id, uint16_t queue_id)

uint16_t	rte_rawdev_queue_count (uint16_t dev_id)

int	rte_rawdev_start (uint16_t dev_id)

void	rte_rawdev_stop (uint16_t dev_id)

int	rte_rawdev_close (uint16_t dev_id)

int	rte_rawdev_reset (uint16_t dev_id)

int	rte_rawdev_dump (uint16_t dev_id, FILE *f)

int	rte_rawdev_get_attr (uint16_t dev_id, const char attr_name, uint64_t attr_value)

int	rte_rawdev_set_attr (uint16_t dev_id, const char *attr_name, const uint64_t attr_value)

int	rte_rawdev_enqueue_buffers (uint16_t dev_id, struct rte_rawdev_buf **buffers, unsigned int count, rte_rawdev_obj_t context)

int	rte_rawdev_dequeue_buffers (uint16_t dev_id, struct rte_rawdev_buf **buffers, unsigned int count, rte_rawdev_obj_t context)

int	rte_rawdev_xstats_names_get (uint16_t dev_id, struct rte_rawdev_xstats_name *xstats_names, unsigned int size)

int	rte_rawdev_xstats_get (uint16_t dev_id, const unsigned int ids[], uint64_t values[], unsigned int n)

uint64_t	rte_rawdev_xstats_by_name_get (uint16_t dev_id, const char name, unsigned int id)

int	rte_rawdev_xstats_reset (uint16_t dev_id, const uint32_t ids[], uint32_t nb_ids)

int	rte_rawdev_firmware_status_get (uint16_t dev_id, rte_rawdev_obj_t status_info)

int	rte_rawdev_firmware_version_get (uint16_t dev_id, rte_rawdev_obj_t version_info)

int	rte_rawdev_firmware_load (uint16_t dev_id, rte_rawdev_obj_t firmware_image)

int	rte_rawdev_firmware_unload (uint16_t dev_id)

int	rte_rawdev_selftest (uint16_t dev_id)

Detailed Description

Generic device abstraction APIs.

This API allow applications to configure and use generic devices having no specific type already available in DPDK.

Warning: EXPERIMENTAL: this API may change without prior notice

Definition in file rte_rawdev.h.

Macro Definition Documentation

#define RTE_RAW_DEV_XSTATS_NAME_SIZE 64

Maximum name length for extended statistics counters

Definition at line 425 of file rte_rawdev.h.

Function Documentation

uint8_t rte_rawdev_count ( void )

Get the total number of raw devices that have been successfully initialised.

Returns: The total number of usable raw devices.

Examples:: examples/ioat/ioatfwd.c.

uint16_t rte_rawdev_get_dev_id ( const char * name )

Get the device identifier for the named raw device.

Parameters

name	Raw device name to select the raw device identifier.

Returns

Returns raw device identifier on success.

<0: Failure to find named raw device.

int rte_rawdev_socket_id ( uint16_t dev_id )

Return the NUMA socket to which a device is connected.

Parameters

dev_id The identifier of the device.

Returns: The NUMA socket id to which the device is connected or a default of zero if the socket could not be determined. -(-EINVAL) dev_id value is out of range.

int rte_rawdev_info_get	(	uint16_t	dev_id,
		struct rte_rawdev_info *	dev_info
	)

Retrieve the contextual information of a raw device.

Parameters

	dev_id	The identifier of the device.
[out]	dev_info	A pointer to a structure of type rte_rawdev_info to be filled with the contextual information of the device.

Returns

0: Success, driver updates the contextual information of the raw device
<0: Error code returned by the driver info get function.

Examples:: examples/ioat/ioatfwd.c, and examples/ntb/ntb_fwd.c.

int rte_rawdev_configure	(	uint16_t	dev_id,
		struct rte_rawdev_info *	dev_conf
	)

Configure a raw device.

This function must be invoked first before any other function in the API. This function can also be re-invoked when a device is in the stopped state.

The caller may use rte_rawdev_info_get() to get the capability of each resources available for this raw device.

Parameters

dev_id	The identifier of the device to configure.
dev_conf	The raw device configuration structure encapsulated into rte_rawdev_info object. It is assumed that the opaque object has enough information which the driver/implementation can use to configure the device. It is also assumed that once the configuration is done, a `queue_id` type field can be used to refer to some arbitrary internal representation of a queue.

Returns

0: Success, device configured.
<0: Error code returned by the driver configuration function.

Examples:: examples/ioat/ioatfwd.c, and examples/ntb/ntb_fwd.c.

int rte_rawdev_queue_conf_get	(	uint16_t	dev_id,
		uint16_t	queue_id,
		rte_rawdev_obj_t	queue_conf
	)

Retrieve the current configuration information of a raw queue designated by its queue_id from the raw driver for a raw device.

This function intended to be used in conjunction with rte_raw_queue_setup() where caller needs to set up the queue by overriding few default values.

Parameters

	dev_id	The identifier of the device.
	queue_id	The index of the raw queue to get the configuration information. The value must be in the range [0, nb_raw_queues - 1] previously supplied to rte_rawdev_configure().
[out]	queue_conf	The pointer to the default raw queue configuration data.

Returns

0: Success, driver updates the default raw queue configuration data.
<0: Error code returned by the driver info get function.

See also: rte_raw_queue_setup()

int rte_rawdev_queue_setup	(	uint16_t	dev_id,
		uint16_t	queue_id,
		rte_rawdev_obj_t	queue_conf
	)

Allocate and set up a raw queue for a raw device.

Parameters

dev_id	The identifier of the device.
queue_id	The index of the raw queue to setup. The value must be in the range [0, nb_raw_queues - 1] previously supplied to rte_rawdev_configure().
queue_conf	The pointer to the configuration data to be used for the raw queue. NULL value is allowed, in which case default configuration used.

See also: rte_rawdev_queue_conf_get()

Returns

0: Success, raw queue correctly set up.
<0: raw queue configuration failed

Examples:: examples/ntb/ntb_fwd.c.

int rte_rawdev_queue_release	(	uint16_t	dev_id,
		uint16_t	queue_id
	)

Release and deallocate a raw queue from a raw device.

Parameters

dev_id	The identifier of the device.
queue_id	The index of the raw queue to release. The value must be in the range [0, nb_raw_queues - 1] previously supplied to rte_rawdev_configure().

See also: rte_rawdev_queue_conf_get()

Returns

0: Success, raw queue released.
<0: raw queue configuration failed

uint16_t rte_rawdev_queue_count ( uint16_t dev_id )

Get the number of raw queues on a specific raw device

Parameters

dev_id Raw device identifier.

Returns

The number of configured raw queues

int rte_rawdev_start ( uint16_t dev_id )

Start a raw device.

The device start step is the last one and consists of setting the raw queues to start accepting the raws and schedules to raw ports.

On success, all basic functions exported by the API (raw enqueue, raw dequeue and so on) can be invoked.

Parameters

dev_id Raw device identifier

Returns

0: Success, device started. < 0: Failure

Examples:: examples/ioat/ioatfwd.c, and examples/ntb/ntb_fwd.c.

void rte_rawdev_stop ( uint16_t dev_id )

Stop a raw device. The device can be restarted with a call to rte_rawdev_start()

Parameters

dev_id Raw device identifier.

Examples:: examples/ioat/ioatfwd.c, and examples/ntb/ntb_fwd.c.

int rte_rawdev_close ( uint16_t dev_id )

Close a raw device. The device cannot be restarted after this call.

Parameters

dev_id Raw device identifier

Returns

0 on successfully closing device
<0 on failure to close device
(-EAGAIN) if device is busy

Examples:: examples/ntb/ntb_fwd.c.

int rte_rawdev_reset ( uint16_t dev_id )

Reset a raw device. This is different from cycle of rte_rawdev_start->rte_rawdev_stop in the sense similar to hard or soft reset.

Parameters

dev_id Raw device identifiers

Returns: 0 for successful reset, !0 for failure in resetting

int rte_rawdev_dump	(	uint16_t	dev_id,
		FILE *	f
	)

Dump internal information about dev_id to the FILE* provided in f.

Parameters

dev_id	The identifier of the device.
f	A pointer to a file for output

Returns

0: on success
<0: on failure.

int rte_rawdev_get_attr	(	uint16_t	dev_id,
		const char *	attr_name,
		uint64_t *	attr_value
	)

Get an attribute value from implementation. Attribute is an opaque handle agreed upon between application and PMD.

Implementations are expected to maintain an array of attribute-value pairs based on application calls. Memory management for this structure is shared responsibility of implementation and application.

Parameters

dev_id	The identifier of the device to configure.
attr_name	Opaque object representing an attribute in implementation.
attr_value	[out] Opaque response to the attribute value. In case of error, this remains untouched. This is double pointer of void type.

Returns: 0 for success !0 Error; attr_value remains untouched in case of error.

Examples:: examples/ntb/ntb_fwd.c.

int rte_rawdev_set_attr	(	uint16_t	dev_id,
		const char *	attr_name,
		const uint64_t	attr_value
	)

Set an attribute value. Attribute is an opaque handle agreed upon between application and PMD.

Parameters

dev_id	The identifier of the device to configure.
attr_name	Opaque object representing an attribute in implementation.
attr_value	Value of the attribute represented by attr_name

Returns: 0 for success !0 Error

Examples:: examples/ntb/ntb_fwd.c.

int rte_rawdev_enqueue_buffers	(	uint16_t	dev_id,
		struct rte_rawdev_buf **	buffers,
		unsigned int	count,
		rte_rawdev_obj_t	context
	)

Enqueue a stream of buffers to the device.

Rather than specifying a queue, this API passes along an opaque object to the driver implementation. That object can be a queue or any other contextual information necessary for the device to enqueue buffers.

Parameters

dev_id	The identifier of the device to configure.
buffers	Collection of buffers for enqueuing
count	Count of buffers to enqueue
context	Opaque context information.

Returns: >=0 for buffers enqueued !0 for failure. Whether partial enqueue is failure or success is defined between app and driver implementation.

Examples:: examples/ntb/ntb_fwd.c.

int rte_rawdev_dequeue_buffers	(	uint16_t	dev_id,
		struct rte_rawdev_buf **	buffers,
		unsigned int	count,
		rte_rawdev_obj_t	context
	)

Dequeue a stream of buffers from the device.

Rather than specifying a queue, this API passes along an opaque object to the driver implementation. That object can be a queue or any other contextual information necessary for the device to dequeue buffers.

Application should have allocated enough space to store count response buffers. Releasing buffers dequeued is responsibility of the application.

Parameters

dev_id	The identifier of the device to configure.
buffers	Collection of buffers dequeued
count	Max buffers expected to be dequeued
context	Opaque context information.

Returns: >=0 for buffers dequeued !0 for failure. Whether partial enqueue is failure or success is defined between app and driver implementation.

Examples:: examples/ntb/ntb_fwd.c.

int rte_rawdev_xstats_names_get	(	uint16_t	dev_id,
		struct rte_rawdev_xstats_name *	xstats_names,
		unsigned int	size
	)

Retrieve names of extended statistics of a raw device.

Parameters

	dev_id	The identifier of the raw device.
[out]	xstats_names	Block of memory to insert names into. Must be at least size in capacity. If set to NULL, function returns required capacity.
	size	Capacity of xstats_names (number of names).

Returns

positive value lower or equal to size: success. The return value is the number of entries filled in the stats table.
positive value higher than size: error, the given statistics table is too small. The return value corresponds to the size that should be given to succeed. The entries in the table are not valid and shall not be used by the caller.
negative value on error: -ENODEV for invalid dev_id -ENOTSUP if the device doesn't support this function.

Examples:: examples/ioat/ioatfwd.c, and examples/ntb/ntb_fwd.c.

int rte_rawdev_xstats_get	(	uint16_t	dev_id,
		const unsigned int	ids[],
		uint64_t	values[],
		unsigned int	n
	)

Retrieve extended statistics of a raw device.

Parameters

	dev_id	The identifier of the device.
	ids	The id numbers of the stats to get. The ids can be got from the stat position in the stat list from rte_rawdev_get_xstats_names(), or by using rte_rawdev_get_xstats_by_name()
[out]	values	The values for each stats request by ID.
	n	The number of stats requested

Returns

positive value: number of stat entries filled into the values array
negative value on error: -ENODEV for invalid dev_id -ENOTSUP if the device doesn't support this function.

Examples:: examples/ioat/ioatfwd.c, and examples/ntb/ntb_fwd.c.

uint64_t rte_rawdev_xstats_by_name_get	(	uint16_t	dev_id,
		const char *	name,
		unsigned int *	id
	)

Retrieve the value of a single stat by requesting it by name.

Parameters

	dev_id	The identifier of the device
	name	The stat name to retrieve
[out]	id	If non-NULL, the numerical id of the stat will be returned, so that further requests for the stat can be got using rte_rawdev_xstats_get, which will be faster as it doesn't need to scan a list of names for the stat. If the stat cannot be found, the id returned will be (unsigned)-1.

Returns

positive value or zero: the stat value
negative value: -EINVAL if stat not found, -ENOTSUP if not supported.

int rte_rawdev_xstats_reset	(	uint16_t	dev_id,
		const uint32_t	ids[],
		uint32_t	nb_ids
	)

Reset the values of the xstats of the selected component in the device.

Parameters

dev_id	The identifier of the device
ids	Selects specific statistics to be reset. When NULL, all statistics will be reset. If non-NULL, must point to array of at least nb_ids size.
nb_ids	The number of ids available from the ids array. Ignored when ids is NULL.

Returns

zero: successfully reset the statistics to zero
negative value: -EINVAL invalid parameters, -ENOTSUP if not supported.

Examples:: examples/ntb/ntb_fwd.c.

int rte_rawdev_firmware_status_get	(	uint16_t	dev_id,
		rte_rawdev_obj_t	status_info
	)

Get Firmware status of the device.. Returns a memory allocated by driver/implementation containing status information block. It is responsibility of caller to release the buffer.

Parameters

dev_id	Raw device identifier
status_info	Pointer to status information area. Caller is responsible for releasing the memory associated.

Returns: 0 for success, !0 for failure, status_info argument state is undefined

int rte_rawdev_firmware_version_get	(	uint16_t	dev_id,
		rte_rawdev_obj_t	version_info
	)

Get Firmware version of the device. Returns a memory allocated by driver/implementation containing version information block. It is responsibility of caller to release the buffer.

Parameters

dev_id	Raw device identifier
version_info	Pointer to version information area. Caller is responsible for releasing the memory associated.

Returns: 0 for success, !0 for failure, version_info argument state is undefined

int rte_rawdev_firmware_load	(	uint16_t	dev_id,
		rte_rawdev_obj_t	firmware_image
	)

Load firmware on the device. TODO: In future, methods like directly flashing from file too can be supported.

Parameters

dev_id	Raw device identifier
firmware_image	Pointer to buffer containing image binary data

Returns: 0 for successful load !0 for failure to load the provided image, or image incorrect.

int rte_rawdev_firmware_unload ( uint16_t dev_id )

Unload firmware from the device.

Parameters

dev_id Raw device identifiers

Returns: 0 for successful Unload !0 for failure in unloading

int rte_rawdev_selftest ( uint16_t dev_id )

Trigger the rawdev self test.

Parameters

dev_id The identifier of the device

Returns

0: Selftest successful
-ENOTSUP if the device doesn't support selftest
other values < 0 on failure.

Data Structures

Macros

Functions

Detailed Description

Macro Definition Documentation

Function Documentation