rte_event_port_conf Struct Reference

#include <rte_eventdev.h>

Data Fields
int32_t	new_event_threshold
uint16_t	dequeue_depth
uint16_t	enqueue_depth

Detailed Description

Event port configuration structure

Definition at line 628 of file rte_eventdev.h.

Field Documentation

int32_t new_event_threshold

A backpressure threshold for new event enqueues on this port. Use for closed system event dev where event capacity is limited, and cannot exceed the capacity of the event dev. Configuring ports with different thresholds can make higher priority traffic less likely to be backpressured. For example, a port used to inject NIC Rx packets into the event dev can have a lower threshold so as not to overwhelm the device, while ports used for worker pools can have a higher threshold. This value cannot exceed the nb_events_limit which was previously supplied to rte_event_dev_configure(). This should be set to '-1' for open system.

Definition at line 630 of file rte_eventdev.h.

uint16_t dequeue_depth

Configure number of bulk dequeues for this event port. This value cannot exceed the nb_event_port_dequeue_depth which previously supplied to rte_event_dev_configure()

Definition at line 643 of file rte_eventdev.h.

uint16_t enqueue_depth

Configure number of bulk enqueues for this event port. This value cannot exceed the nb_event_port_enqueue_depth which previously supplied to rte_event_dev_configure()

Definition at line 648 of file rte_eventdev.h.

---

The documentation for this struct was generated from the following file:

• lib/librte_eventdev/rte_eventdev.h