#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <errno.h>
#include <inttypes.h>
#include <sys/queue.h>
#include <rte_config.h>
#include <rte_spinlock.h>
#include <rte_log.h>
#include <rte_debug.h>
#include <rte_lcore.h>
#include <rte_memory.h>
#include <rte_branch_prediction.h>
#include <rte_ring.h>
#include <rte_memcpy.h>
#include <rte_common.h>

Data Structures
struct	rte_mempool_cache

struct	rte_mempool_objsz

struct	rte_mempool_objhdr

struct	rte_mempool_memhdr

struct	rte_mempool_info

struct	rte_mempool

struct	rte_mempool_ops

struct	rte_mempool_ops_table

Macros
#define	RTE_MEMPOOL_HEADER_COOKIE1 0xbadbadbadadd2e55ULL

#define	RTE_MEMPOOL_HEADER_COOKIE2 0xf2eef2eedadd2e55ULL

#define	RTE_MEMPOOL_TRAILER_COOKIE 0xadd2e55badbadbadULL

#define	MEMPOOL_PG_NUM_DEFAULT 1

#define	MEMPOOL_F_NO_SPREAD 0x0001

#define	MEMPOOL_F_NO_CACHE_ALIGN 0x0002

#define	MEMPOOL_F_SP_PUT 0x0004

#define	MEMPOOL_F_SC_GET 0x0008

#define	MEMPOOL_F_POOL_CREATED 0x0010

#define	MEMPOOL_F_NO_IOVA_CONTIG 0x0020

#define	MEMPOOL_HEADER_SIZE(mp, cs)

#define	RTE_MEMPOOL_OPS_NAMESIZE 32

#define	RTE_MEMPOOL_MAX_OPS_IDX 16

#define	MEMPOOL_REGISTER_OPS(ops)

Typedefs
typedef void(	rte_mempool_memchunk_free_cb_t) (struct rte_mempool_memhdr memhdr, void opaque)

typedef int(*	rte_mempool_alloc_t) (struct rte_mempool *mp)

typedef void(*	rte_mempool_free_t) (struct rte_mempool *mp)

typedef int(*	rte_mempool_enqueue_t) (struct rte_mempool mp, void const *obj_table, unsigned int n)

typedef int(*	rte_mempool_dequeue_t) (struct rte_mempool mp, void *obj_table, unsigned int n)

typedef int(*	rte_mempool_dequeue_contig_blocks_t) (struct rte_mempool mp, void *first_obj_table, unsigned int n)

typedef unsigned(*	rte_mempool_get_count) (const struct rte_mempool *mp)

typedef ssize_t(*	rte_mempool_calc_mem_size_t) (const struct rte_mempool mp, uint32_t obj_num, uint32_t pg_shift, size_t min_chunk_size, size_t *align)

typedef void(	rte_mempool_populate_obj_cb_t) (struct rte_mempool mp, void opaque, void *vaddr, rte_iova_t iova)

typedef int(*	rte_mempool_populate_t) (struct rte_mempool mp, unsigned int max_objs, void vaddr, rte_iova_t iova, size_t len, rte_mempool_populate_obj_cb_t obj_cb, void obj_cb_arg)

typedef int(*	rte_mempool_get_info_t) (const struct rte_mempool mp, struct rte_mempool_info info)

typedef void(	rte_mempool_obj_cb_t) (struct rte_mempool mp, void opaque, void *obj, unsigned obj_idx)

typedef void(	rte_mempool_mem_cb_t) (struct rte_mempool mp, void opaque, struct rte_mempool_memhdr *memhdr, unsigned mem_idx)

typedef void(	rte_mempool_ctor_t) (struct rte_mempool , void )

Functions
	STAILQ_HEAD (rte_mempool_objhdr_list, rte_mempool_objhdr)

	STAILQ_HEAD (rte_mempool_memhdr_list, rte_mempool_memhdr)

static struct rte_mempool *	rte_mempool_from_obj (void *obj)

void	rte_mempool_contig_blocks_check_cookies (const struct rte_mempool mp, void const *first_obj_table_const, unsigned int n, int free)

ssize_t	rte_mempool_op_calc_mem_size_default (const struct rte_mempool mp, uint32_t obj_num, uint32_t pg_shift, size_t min_chunk_size, size_t *align)

int	rte_mempool_op_populate_default (struct rte_mempool mp, unsigned int max_objs, void vaddr, rte_iova_t iova, size_t len, rte_mempool_populate_obj_cb_t obj_cb, void obj_cb_arg)

__rte_experimental int	rte_mempool_ops_get_info (const struct rte_mempool mp, struct rte_mempool_info info)

int	rte_mempool_set_ops_byname (struct rte_mempool mp, const char name, void *pool_config)

int	rte_mempool_register_ops (const struct rte_mempool_ops *ops)

struct rte_mempool *	rte_mempool_create (const char name, unsigned n, unsigned elt_size, unsigned cache_size, unsigned private_data_size, rte_mempool_ctor_t mp_init, void mp_init_arg, rte_mempool_obj_cb_t obj_init, void *obj_init_arg, int socket_id, unsigned flags)

struct rte_mempool *	rte_mempool_create_empty (const char *name, unsigned n, unsigned elt_size, unsigned cache_size, unsigned private_data_size, int socket_id, unsigned flags)

void	rte_mempool_free (struct rte_mempool *mp)

int	rte_mempool_populate_iova (struct rte_mempool mp, char vaddr, rte_iova_t iova, size_t len, rte_mempool_memchunk_free_cb_t free_cb, void opaque)

int	rte_mempool_populate_virt (struct rte_mempool mp, char addr, size_t len, size_t pg_sz, rte_mempool_memchunk_free_cb_t free_cb, void opaque)

int	rte_mempool_populate_default (struct rte_mempool *mp)

int	rte_mempool_populate_anon (struct rte_mempool *mp)

uint32_t	rte_mempool_obj_iter (struct rte_mempool mp, rte_mempool_obj_cb_t obj_cb, void *obj_cb_arg)

uint32_t	rte_mempool_mem_iter (struct rte_mempool mp, rte_mempool_mem_cb_t mem_cb, void *mem_cb_arg)

void	rte_mempool_dump (FILE f, struct rte_mempool mp)

struct rte_mempool_cache *	rte_mempool_cache_create (uint32_t size, int socket_id)

void	rte_mempool_cache_free (struct rte_mempool_cache *cache)

static __rte_always_inline struct rte_mempool_cache *	rte_mempool_default_cache (struct rte_mempool *mp, unsigned lcore_id)

static __rte_always_inline void	rte_mempool_cache_flush (struct rte_mempool_cache cache, struct rte_mempool mp)

static __rte_always_inline void	rte_mempool_generic_put (struct rte_mempool mp, void const obj_table, unsigned int n, struct rte_mempool_cache cache)

static __rte_always_inline void	rte_mempool_put_bulk (struct rte_mempool mp, void const *obj_table, unsigned int n)

static __rte_always_inline void	rte_mempool_put (struct rte_mempool mp, void obj)

static __rte_always_inline int	rte_mempool_generic_get (struct rte_mempool mp, void obj_table, unsigned int n, struct rte_mempool_cache cache)

static __rte_always_inline int	rte_mempool_get_bulk (struct rte_mempool mp, void *obj_table, unsigned int n)

static __rte_always_inline int	rte_mempool_get (struct rte_mempool mp, void *obj_p)

static __rte_always_inline int __rte_experimental	rte_mempool_get_contig_blocks (struct rte_mempool mp, void *first_obj_table, unsigned int n)

unsigned int	rte_mempool_avail_count (const struct rte_mempool *mp)

unsigned int	rte_mempool_in_use_count (const struct rte_mempool *mp)

static int	rte_mempool_full (const struct rte_mempool *mp)

static int	rte_mempool_empty (const struct rte_mempool *mp)

static rte_iova_t	rte_mempool_virt2iova (const void *elt)

void	rte_mempool_audit (struct rte_mempool *mp)

static void *	rte_mempool_get_priv (struct rte_mempool *mp)

void	rte_mempool_list_dump (FILE *f)

struct rte_mempool *	rte_mempool_lookup (const char *name)

uint32_t	rte_mempool_calc_obj_size (uint32_t elt_size, uint32_t flags, struct rte_mempool_objsz *sz)

void	rte_mempool_walk (void(func)(struct rte_mempool , void arg), void arg)

Variables
struct rte_mempool_ops_table	rte_mempool_ops_table

Detailed Description

RTE Mempool.

A memory pool is an allocator of fixed-size object. It is identified by its name, and uses a ring to store free objects. It provides some other optional services, like a per-core object cache, and an alignment helper to ensure that objects are padded to spread them equally on all RAM channels, ranks, and so on.

Objects owned by a mempool should never be added in another mempool. When an object is freed using rte_mempool_put() or equivalent, the object data is not modified; the user can save some meta-data in the object data and retrieve them when allocating a new object.

Note: the mempool implementation is not preemptible. An lcore must not be interrupted by another task that uses the same mempool (because it uses a ring which is not preemptible). Also, usual mempool functions like rte_mempool_get() or rte_mempool_put() are designed to be called from an EAL thread due to the internal per-lcore cache. Due to the lack of caching, rte_mempool_get() or rte_mempool_put() performance will suffer when called by non-EAL threads. Instead, non-EAL threads should call rte_mempool_generic_get() or rte_mempool_generic_put() with a user cache created with rte_mempool_cache_create().

Definition in file rte_mempool.h.

Macro Definition Documentation

#define RTE_MEMPOOL_HEADER_COOKIE1 0xbadbadbadadd2e55ULL

Header cookie.

Definition at line 58 of file rte_mempool.h.

#define RTE_MEMPOOL_HEADER_COOKIE2 0xf2eef2eedadd2e55ULL

Header cookie.

Definition at line 59 of file rte_mempool.h.

#define RTE_MEMPOOL_TRAILER_COOKIE 0xadd2e55badbadbadULL

Trailer cookie.

Definition at line 60 of file rte_mempool.h.

#define MEMPOOL_PG_NUM_DEFAULT 1

Mempool over one chunk of physically continuous memory

Definition at line 116 of file rte_mempool.h.

#define MEMPOOL_F_NO_SPREAD 0x0001

Do not spread among memory channels.

Definition at line 260 of file rte_mempool.h.

#define MEMPOOL_F_NO_CACHE_ALIGN 0x0002

Do not align objs on cache lines.

Definition at line 261 of file rte_mempool.h.

#define MEMPOOL_F_SP_PUT 0x0004

Default put is "single-producer".

Definition at line 262 of file rte_mempool.h.

#define MEMPOOL_F_SC_GET 0x0008

Default get is "single-consumer".

Definition at line 263 of file rte_mempool.h.

#define MEMPOOL_F_POOL_CREATED 0x0010

Internal: pool is created.

Definition at line 264 of file rte_mempool.h.

#define MEMPOOL_F_NO_IOVA_CONTIG 0x0020

Don't need IOVA contiguous objs.

Definition at line 265 of file rte_mempool.h.

#define MEMPOOL_HEADER_SIZE	(	mp,
		cs
	)

Value:

(sizeof(*(mp)) + (((cs) == 0) ? 0 : \

(sizeof(struct rte_mempool_cache) * RTE_MAX_LCORE)))

rte_mempool_cache

Definition: rte_mempool.h:83

Calculate the size of the mempool header.

Parameters

mp	Pointer to the memory pool.
cs	Size of the per-lcore cache.

Definition at line 306 of file rte_mempool.h.

#define RTE_MEMPOOL_OPS_NAMESIZE 32

Max length of ops struct name.

Definition at line 395 of file rte_mempool.h.

#define RTE_MEMPOOL_MAX_OPS_IDX 16

Max registered ops structs

Definition at line 585 of file rte_mempool.h.

#define MEMPOOL_REGISTER_OPS ( ops )

Value:

RTE_INIT(mp_hdlr_init_##ops)                \
    {                           \
		rte_mempool_register_ops(&ops);           \
    }

Macro to statically register the ops of a mempool handler. Note that the rte_mempool_register_ops fails silently here when more than RTE_MEMPOOL_MAX_OPS_IDX is registered.

Definition at line 835 of file rte_mempool.h.

Typedef Documentation

typedef void( rte_mempool_memchunk_free_cb_t) (struct rte_mempool_memhdr *memhdr, void *opaque)

Callback used to free a memory chunk

Definition at line 173 of file rte_mempool.h.

typedef int(* rte_mempool_alloc_t) (struct rte_mempool *mp)

Prototype for implementation specific data provisioning function.

The function should provide the implementation specific memory for use by the other mempool ops functions in a given mempool ops struct. E.g. the default ops provides an instance of the rte_ring for this purpose. it will most likely point to a different type of data structure, and will be transparent to the application programmer. This function should set mp->pool_data.

Definition at line 407 of file rte_mempool.h.

typedef void(* rte_mempool_free_t) (struct rte_mempool *mp)

Free the opaque private data pointed to by mp->pool_data pointer.

Definition at line 412 of file rte_mempool.h.

typedef int(* rte_mempool_enqueue_t) (struct rte_mempool *mp, void *const *obj_table, unsigned int n)

Enqueue an object into the external pool.

Definition at line 417 of file rte_mempool.h.

typedef int(* rte_mempool_dequeue_t) (struct rte_mempool *mp, void **obj_table, unsigned int n)

Dequeue an object from the external pool.

Definition at line 423 of file rte_mempool.h.

typedef int(* rte_mempool_dequeue_contig_blocks_t) (struct rte_mempool *mp, void **first_obj_table, unsigned int n)

Warning: EXPERIMENTAL: this API may change without prior notice.

Dequeue a number of contiguous object blocks from the external pool.

Definition at line 432 of file rte_mempool.h.

typedef unsigned(* rte_mempool_get_count) (const struct rte_mempool *mp)

Return the number of available objects in the external pool.

Definition at line 438 of file rte_mempool.h.

typedef ssize_t(* rte_mempool_calc_mem_size_t) (const struct rte_mempool *mp, uint32_t obj_num, uint32_t pg_shift, size_t *min_chunk_size, size_t *align)

Calculate memory size required to store given number of objects.

If mempool objects are not required to be IOVA-contiguous (the flag MEMPOOL_F_NO_IOVA_CONTIG is set), min_chunk_size defines virtually contiguous chunk size. Otherwise, if mempool objects must be IOVA-contiguous (the flag MEMPOOL_F_NO_IOVA_CONTIG is clear), min_chunk_size defines IOVA-contiguous chunk size.

Parameters

[in]	mp	Pointer to the memory pool.
[in]	obj_num	Number of objects.
[in]	pg_shift	LOG2 of the physical pages size. If set to 0, ignore page boundaries.
[out]	min_chunk_size	Location for minimum size of the memory chunk which may be used to store memory pool objects.
[out]	align	Location for required memory chunk alignment.

Returns: Required memory size aligned at page boundary.

Definition at line 463 of file rte_mempool.h.

typedef void( rte_mempool_populate_obj_cb_t) (struct rte_mempool *mp, void *opaque, void *vaddr, rte_iova_t iova)

Function to be called for each populated object.

Parameters

[in]	mp	A pointer to the mempool structure.
[in]	opaque	An opaque pointer passed to iterator.
[in]	vaddr	Object virtual address.
[in]	iova	Input/output virtual address of the object or RTE_BAD_IOVA.

Definition at line 502 of file rte_mempool.h.

typedef int(* rte_mempool_populate_t) (struct rte_mempool *mp, unsigned int max_objs, void *vaddr, rte_iova_t iova, size_t len, rte_mempool_populate_obj_cb_t *obj_cb, void *obj_cb_arg)

Populate memory pool objects using provided memory chunk.

Populated objects should be enqueued to the pool, e.g. using rte_mempool_ops_enqueue_bulk().

If the given IO address is unknown (iova = RTE_BAD_IOVA), the chunk doesn't need to be physically contiguous (only virtually), and allocated objects may span two pages.

Parameters

[in]	mp	A pointer to the mempool structure.
[in]	max_objs	Maximum number of objects to be populated.
[in]	vaddr	The virtual address of memory that should be used to store objects.
[in]	iova	The IO address
[in]	len	The length of memory in bytes.
[in]	obj_cb	Callback function to be executed for each populated object.
[in]	obj_cb_arg	An opaque pointer passed to the callback function.

Returns: The number of objects added on success. On error, no objects are populated and a negative errno is returned.

Definition at line 533 of file rte_mempool.h.

typedef int(* rte_mempool_get_info_t) (const struct rte_mempool *mp, struct rte_mempool_info *info)

Warning: EXPERIMENTAL: this API may change without prior notice.

Get some additional information about a mempool.

Definition at line 553 of file rte_mempool.h.

typedef void( rte_mempool_obj_cb_t) (struct rte_mempool *mp, void *opaque, void *obj, unsigned obj_idx)

An object callback function for mempool.

Used by rte_mempool_create() and rte_mempool_obj_iter().

Definition at line 846 of file rte_mempool.h.

typedef void( rte_mempool_mem_cb_t) (struct rte_mempool *mp, void *opaque, struct rte_mempool_memhdr *memhdr, unsigned mem_idx)

A memory callback function for mempool.

Used by rte_mempool_mem_iter().

Definition at line 855 of file rte_mempool.h.

typedef void( rte_mempool_ctor_t) (struct rte_mempool *, void *)

A mempool constructor callback function.

Arguments are the mempool and the opaque pointer given by the user in rte_mempool_create().

Definition at line 865 of file rte_mempool.h.

Function Documentation

STAILQ_HEAD	(	rte_mempool_objhdr_list	,
		rte_mempool_objhdr
	)

A list of object headers type

STAILQ_HEAD	(	rte_mempool_memhdr_list	,
		rte_mempool_memhdr
	)

A list of memory where objects are stored

static struct rte_mempool* rte_mempool_from_obj ( void * obj )

static

Return a pointer to the mempool owning this object.

Parameters

obj	An object that is owned by a pool. If this is not the case, the behavior is undefined.

Returns: A pointer to the mempool structure.

Definition at line 326 of file rte_mempool.h.

void rte_mempool_contig_blocks_check_cookies	(	const struct rte_mempool *	mp,
		void const	first_obj_table_const,
		unsigned int	n,
		int	free
	)

Warning: EXPERIMENTAL: this API may change without prior notice.

ssize_t rte_mempool_op_calc_mem_size_default	(	const struct rte_mempool *	mp,
		uint32_t	obj_num,
		uint32_t	pg_shift,
		size_t *	min_chunk_size,
		size_t *	align
	)

Default way to calculate memory size required to store given number of objects.

If page boundaries may be ignored, it is just a product of total object size including header and trailer and number of objects. Otherwise, it is a number of pages required to store given number of objects without crossing page boundary.

Note that if object size is bigger than page size, then it assumes that pages are grouped in subsets of physically continuous pages big enough to store at least one object.

Minimum size of memory chunk is a maximum of the page size and total element size.

Required memory chunk alignment is a maximum of page size and cache line size.

int rte_mempool_op_populate_default	(	struct rte_mempool *	mp,
		unsigned int	max_objs,
		void *	vaddr,
		rte_iova_t	iova,
		size_t	len,
		rte_mempool_populate_obj_cb_t *	obj_cb,
		void *	obj_cb_arg
	)

Default way to populate memory pool object using provided memory chunk: just slice objects one by one.

__rte_experimental int rte_mempool_ops_get_info	(	const struct rte_mempool *	mp,
		struct rte_mempool_info *	info
	)

Warning: EXPERIMENTAL: this API may change without prior notice.

Wrapper for mempool_ops get_info callback.

Parameters

[in]	mp	Pointer to the memory pool.
[out]	info	Pointer to the rte_mempool_info structure

Returns

0: Success; The mempool driver supports retrieving supplementary mempool information
-ENOTSUP - doesn't support get_info ops (valid case).

int rte_mempool_set_ops_byname	(	struct rte_mempool *	mp,
		const char *	name,
		void *	pool_config
	)

Set the ops of a mempool.

This can only be done on a mempool that is not populated, i.e. just after a call to rte_mempool_create_empty().

Parameters

mp	Pointer to the memory pool.
name	Name of the ops structure to use for this mempool.
pool_config	Opaque data that can be passed by the application to the ops functions.

Returns

0: Success; the mempool is now using the requested ops functions.
-EINVAL - Invalid ops struct name provided.
-EEXIST - mempool already has an ops struct assigned.

int rte_mempool_register_ops ( const struct rte_mempool_ops * ops )

Register mempool operations.

Parameters

ops	Pointer to an ops structure to register.

Returns

>=0: Success; return the index of the ops struct in the table.
-EINVAL - some missing callbacks while registering ops struct.
-ENOSPC - the maximum number of ops structs has been reached.

struct rte_mempool* rte_mempool_create	(	const char *	name,
		unsigned	n,
		unsigned	elt_size,
		unsigned	cache_size,
		unsigned	private_data_size,
		rte_mempool_ctor_t *	mp_init,
		void *	mp_init_arg,
		rte_mempool_obj_cb_t *	obj_init,
		void *	obj_init_arg,
		int	socket_id,
		unsigned	flags
	)

Create a new mempool named name in memory.

This function uses rte_memzone_reserve() to allocate memory. The pool contains n elements of elt_size. Its size is set to n.

Parameters

name	The name of the mempool.
n	The number of elements in the mempool. The optimum size (in terms of memory usage) for a mempool is when n is a power of two minus one: n = (2^q - 1).
elt_size	The size of each element.
cache_size	If cache_size is non-zero, the rte_mempool library will try to limit the accesses to the common lockless pool, by maintaining a per-lcore object cache. This argument must be lower or equal to CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE and n / 1.5. It is advised to choose cache_size to have "n modulo cache_size == 0": if this is not the case, some elements will always stay in the pool and will never be used. The access to the per-lcore table is of course faster than the multi-producer/consumer pool. The cache can be disabled if the cache_size argument is set to 0; it can be useful to avoid losing objects in cache.
private_data_size	The size of the private data appended after the mempool structure. This is useful for storing some private data after the mempool structure, as is done for rte_mbuf_pool for example.
mp_init	A function pointer that is called for initialization of the pool, before object initialization. The user can initialize the private data in this function if needed. This parameter can be NULL if not needed.
mp_init_arg	An opaque pointer to data that can be used in the mempool constructor function.
obj_init	A function pointer that is called for each object at initialization of the pool. The user can set some meta data in objects if needed. This parameter can be NULL if not needed. The obj_init() function takes the mempool pointer, the init_arg, the object pointer and the object number as parameters.
obj_init_arg	An opaque pointer to data that can be used as an argument for each call to the object constructor function.
socket_id	The socket_id argument is the socket identifier in the case of NUMA. The value can be SOCKET_ID_ANY if there is no NUMA constraint for the reserved zone.
flags	The flags arguments is an OR of following flags: MEMPOOL_F_NO_SPREAD: By default, objects addresses are spread between channels in RAM: the pool allocator will add padding between objects depending on the hardware configuration. See Memory alignment constraints for details. If this flag is set, the allocator will just align them to a cache line. MEMPOOL_F_NO_CACHE_ALIGN: By default, the returned objects are cache-aligned. This flag removes this constraint, and no padding will be present between objects. This flag implies MEMPOOL_F_NO_SPREAD. MEMPOOL_F_SP_PUT: If this flag is set, the default behavior when using rte_mempool_put() or rte_mempool_put_bulk() is "single-producer". Otherwise, it is "multi-producers". MEMPOOL_F_SC_GET: If this flag is set, the default behavior when using rte_mempool_get() or rte_mempool_get_bulk() is "single-consumer". Otherwise, it is "multi-consumers". MEMPOOL_F_NO_IOVA_CONTIG: If set, allocated objects won't necessarily be contiguous in IO memory.

Returns

The pointer to the new allocated mempool, on success. NULL on error with rte_errno set appropriately. Possible rte_errno values include:

E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
E_RTE_SECONDARY - function was called from a secondary process instance
EINVAL - cache size provided is too large
ENOSPC - the maximum number of memzones has already been allocated
EEXIST - a memzone with the same name already exists
ENOMEM - no appropriate memory area found in which to create memzone

Examples:: examples/fips_validation/fips_dev_self_test.c, examples/fips_validation/main.c, examples/ip_pipeline/cryptodev.c, examples/ipsec-secgw/ipsec-secgw.c, examples/l2fwd-crypto/main.c, examples/multi_process/simple_mp/main.c, and examples/vhost_crypto/main.c.

struct rte_mempool* rte_mempool_create_empty	(	const char *	name,
		unsigned	n,
		unsigned	elt_size,
		unsigned	cache_size,
		unsigned	private_data_size,
		int	socket_id,
		unsigned	flags
	)

Create an empty mempool

The mempool is allocated and initialized, but it is not populated: no memory is allocated for the mempool elements. The user has to call rte_mempool_populate_*() to add memory chunks to the pool. Once populated, the user may also want to initialize each object with rte_mempool_obj_iter().

Parameters

name	The name of the mempool.
n	The maximum number of elements that can be added in the mempool. The optimum size (in terms of memory usage) for a mempool is when n is a power of two minus one: n = (2^q - 1).
elt_size	The size of each element.
cache_size	Size of the cache. See rte_mempool_create() for details.
private_data_size	The size of the private data appended after the mempool structure. This is useful for storing some private data after the mempool structure, as is done for rte_mbuf_pool for example.
socket_id	The socket_id argument is the socket identifier in the case of NUMA. The value can be SOCKET_ID_ANY if there is no NUMA constraint for the reserved zone.
flags	Flags controlling the behavior of the mempool. See rte_mempool_create() for details.

Returns: The pointer to the new allocated mempool, on success. NULL on error with rte_errno set appropriately. See rte_mempool_create() for details.

void rte_mempool_free ( struct rte_mempool * mp )

Free a mempool

Unlink the mempool from global list, free the memory chunks, and all memory referenced by the mempool. The objects must not be used by other cores as they will be freed.

Parameters

mp	A pointer to the mempool structure.

Examples:: examples/fips_validation/fips_dev_self_test.c, examples/fips_validation/main.c, examples/ip_pipeline/cryptodev.c, examples/ip_pipeline/mempool.c, and examples/vhost_crypto/main.c.

int rte_mempool_populate_iova	(	struct rte_mempool *	mp,
		char *	vaddr,
		rte_iova_t	iova,
		size_t	len,
		rte_mempool_memchunk_free_cb_t *	free_cb,
		void *	opaque
	)

Add physically contiguous memory for objects in the pool at init

Add a virtually and physically contiguous memory chunk in the pool where objects can be instantiated.

If the given IO address is unknown (iova = RTE_BAD_IOVA), the chunk doesn't need to be physically contiguous (only virtually), and allocated objects may span two pages.

Parameters

mp	A pointer to the mempool structure.
vaddr	The virtual address of memory that should be used to store objects.
iova	The IO address
len	The length of memory in bytes.
free_cb	The callback used to free this chunk when destroying the mempool.
opaque	An opaque argument passed to free_cb.

Returns: The number of objects added on success. On error, the chunk is not added in the memory list of the mempool and a negative errno is returned.

int rte_mempool_populate_virt	(	struct rte_mempool *	mp,
		char *	addr,
		size_t	len,
		size_t	pg_sz,
		rte_mempool_memchunk_free_cb_t *	free_cb,
		void *	opaque
	)

Add virtually contiguous memory for objects in the pool at init

Add a virtually contiguous memory chunk in the pool where objects can be instantiated.

Parameters

mp	A pointer to the mempool structure.
addr	The virtual address of memory that should be used to store objects. Must be page-aligned.
len	The length of memory in bytes. Must be page-aligned.
pg_sz	The size of memory pages in this virtual area.
free_cb	The callback used to free this chunk when destroying the mempool.
opaque	An opaque argument passed to free_cb.

Returns: The number of objects added on success. On error, the chunk is not added in the memory list of the mempool and a negative errno is returned.

int rte_mempool_populate_default ( struct rte_mempool * mp )

Add memory for objects in the pool at init

This is the default function used by rte_mempool_create() to populate the mempool. It adds memory allocated using rte_memzone_reserve().

Parameters

mp	A pointer to the mempool structure.

Returns: The number of objects added on success. On error, the chunk is not added in the memory list of the mempool and a negative errno is returned.

int rte_mempool_populate_anon ( struct rte_mempool * mp )

Add memory from anonymous mapping for objects in the pool at init

This function mmap an anonymous memory zone that is locked in memory to store the objects of the mempool.

Parameters

mp	A pointer to the mempool structure.

Returns: The number of objects added on success. On error, the chunk is not added in the memory list of the mempool and a negative errno is returned.

uint32_t rte_mempool_obj_iter	(	struct rte_mempool *	mp,
		rte_mempool_obj_cb_t *	obj_cb,
		void *	obj_cb_arg
	)

Call a function for each mempool element

Iterate across all objects attached to a rte_mempool and call the callback function on it.

Parameters

mp	A pointer to an initialized mempool.
obj_cb	A function pointer that is called for each object.
obj_cb_arg	An opaque pointer passed to the callback function.

Returns: Number of objects iterated.

uint32_t rte_mempool_mem_iter	(	struct rte_mempool *	mp,
		rte_mempool_mem_cb_t *	mem_cb,
		void *	mem_cb_arg
	)

Call a function for each mempool memory chunk

Iterate across all memory chunks attached to a rte_mempool and call the callback function on it.

Parameters

mp	A pointer to an initialized mempool.
mem_cb	A function pointer that is called for each memory chunk.
mem_cb_arg	An opaque pointer passed to the callback function.

Returns: Number of memory chunks iterated.

void rte_mempool_dump	(	FILE *	f,
		struct rte_mempool *	mp
	)

Dump the status of the mempool to a file.

Parameters

f	A pointer to a file for output
mp	A pointer to the mempool structure.

struct rte_mempool_cache* rte_mempool_cache_create	(	uint32_t	size,
		int	socket_id
	)

Create a user-owned mempool cache.

This can be used by non-EAL threads to enable caching when they interact with a mempool.

Parameters

size	The size of the mempool cache. See rte_mempool_create()'s cache_size parameter description for more information. The same limits and considerations apply here too.
socket_id	The socket identifier in the case of NUMA. The value can be SOCKET_ID_ANY if there is no NUMA constraint for the reserved zone.

void rte_mempool_cache_free ( struct rte_mempool_cache * cache )

Free a user-owned mempool cache.

Parameters

cache A pointer to the mempool cache.

static __rte_always_inline struct rte_mempool_cache* rte_mempool_default_cache	(	struct rte_mempool *	mp,
		unsigned	lcore_id
	)

static

Get a pointer to the per-lcore default mempool cache.

Parameters

mp	A pointer to the mempool structure.
lcore_id	The logical core id.

Returns: A pointer to the mempool cache or NULL if disabled or non-EAL thread.

Definition at line 1177 of file rte_mempool.h.

static __rte_always_inline void rte_mempool_cache_flush	(	struct rte_mempool_cache *	cache,
		struct rte_mempool *	mp
	)

static

Flush a user-owned mempool cache to the specified mempool.

Parameters

cache	A pointer to the mempool cache.
mp	A pointer to the mempool.

Definition at line 1197 of file rte_mempool.h.

static __rte_always_inline void rte_mempool_generic_put	(	struct rte_mempool *	mp,
		void const	obj_table,
		unsigned int	n,
		struct rte_mempool_cache *	cache
	)

static

Put several objects back in the mempool.

Parameters

mp	A pointer to the mempool structure.
obj_table	A pointer to a table of void * pointers (objects).
n	The number of objects to add in the mempool from the obj_table.
cache	A pointer to a mempool cache structure. May be NULL if not needed.

Definition at line 1280 of file rte_mempool.h.

static __rte_always_inline void rte_mempool_put_bulk	(	struct rte_mempool *	mp,
		void const	obj_table,
		unsigned int	n
	)

static

Put several objects back in the mempool.

This function calls the multi-producer or the single-producer version depending on the default behavior that was specified at mempool creation time (see flags).

Parameters

mp	A pointer to the mempool structure.
obj_table	A pointer to a table of void * pointers (objects).
n	The number of objects to add in the mempool from obj_table.

Examples:: examples/vhost_crypto/main.c.

Definition at line 1302 of file rte_mempool.h.

static __rte_always_inline void rte_mempool_put	(	struct rte_mempool *	mp,
		void *	obj
	)

static

Put one object back in the mempool.

This function calls the multi-producer or the single-producer version depending on the default behavior that was specified at mempool creation time (see flags).

Parameters

mp	A pointer to the mempool structure.
obj	A pointer to the object to be added.

Examples:: examples/multi_process/simple_mp/main.c, and examples/multi_process/simple_mp/mp_commands.c.

Definition at line 1323 of file rte_mempool.h.

static __rte_always_inline int rte_mempool_generic_get	(	struct rte_mempool *	mp,
		void **	obj_table,
		unsigned int	n,
		struct rte_mempool_cache *	cache
	)

static

Get several objects from the mempool.

If cache is enabled, objects will be retrieved first from cache, subsequently from the common pool. Note that it can return -ENOENT when the local cache and common pool are empty, even if cache from other lcores are full.

Parameters

mp	A pointer to the mempool structure.
obj_table	A pointer to a table of void * pointers (objects) that will be filled.
n	The number of objects to get from mempool to obj_table.
cache	A pointer to a mempool cache structure. May be NULL if not needed.

Returns

0: Success; objects taken.
-ENOENT: Not enough entries in the mempool; no object is retrieved.

Definition at line 1421 of file rte_mempool.h.

static __rte_always_inline int rte_mempool_get_bulk	(	struct rte_mempool *	mp,
		void **	obj_table,
		unsigned int	n
	)

static

Get several objects from the mempool.

This function calls the multi-consumers or the single-consumer version, depending on the default behaviour that was specified at mempool creation time (see flags).

If cache is enabled, objects will be retrieved first from cache, subsequently from the common pool. Note that it can return -ENOENT when the local cache and common pool are empty, even if cache from other lcores are full.

Parameters

mp	A pointer to the mempool structure.
obj_table	A pointer to a table of void * pointers (objects) that will be filled.
n	The number of objects to get from the mempool to obj_table.

Returns

0: Success; objects taken
-ENOENT: Not enough entries in the mempool; no object is retrieved.

Examples:: examples/bbdev_app/main.c.

Definition at line 1454 of file rte_mempool.h.

static __rte_always_inline int rte_mempool_get	(	struct rte_mempool *	mp,
		void **	obj_p
	)

static

Get one object from the mempool.

This function calls the multi-consumers or the single-consumer version, depending on the default behavior that was specified at mempool creation (see flags).

If cache is enabled, objects will be retrieved first from cache, subsequently from the common pool. Note that it can return -ENOENT when the local cache and common pool are empty, even if cache from other lcores are full.

Parameters

mp	A pointer to the mempool structure.
obj_p	A pointer to a void * pointer (object) that will be filled.

Returns

0: Success; objects taken.
-ENOENT: Not enough entries in the mempool; no object is retrieved.

Examples:: examples/multi_process/simple_mp/mp_commands.c.

Definition at line 1482 of file rte_mempool.h.

static __rte_always_inline int __rte_experimental rte_mempool_get_contig_blocks	(	struct rte_mempool *	mp,
		void **	first_obj_table,
		unsigned int	n
	)

static

Warning: EXPERIMENTAL: this API may change without prior notice.

Get a contiguous blocks of objects from the mempool.

If cache is enabled, consider to flush it first, to reuse objects as soon as possible.

The application should check that the driver supports the operation by calling rte_mempool_ops_get_info() and checking that contig_block_size is not zero.

Parameters

mp	A pointer to the mempool structure.
first_obj_table	A pointer to a pointer to the first object in each block.
n	The number of blocks to get from mempool.

Returns

0: Success; blocks taken.
-ENOBUFS: Not enough entries in the mempool; no object is retrieved.
-EOPNOTSUPP: The mempool driver does not support block dequeue

Definition at line 1513 of file rte_mempool.h.

unsigned int rte_mempool_avail_count ( const struct rte_mempool * mp )

Return the number of entries in the mempool.

When cache is enabled, this function has to browse the length of all lcores, so it should not be used in a data path, but only for debug purposes. User-owned mempool caches are not accounted for.

Parameters

mp	A pointer to the mempool structure.

Returns: The number of entries in the mempool.

unsigned int rte_mempool_in_use_count ( const struct rte_mempool * mp )

Return the number of elements which have been allocated from the mempool

When cache is enabled, this function has to browse the length of all lcores, so it should not be used in a data path, but only for debug purposes.

Parameters

mp	A pointer to the mempool structure.

Returns: The number of free entries in the mempool.

static int rte_mempool_full ( const struct rte_mempool * mp )

inlinestatic

Test if the mempool is full.

When cache is enabled, this function has to browse the length of all lcores, so it should not be used in a data path, but only for debug purposes. User-owned mempool caches are not accounted for.

Parameters

mp	A pointer to the mempool structure.

Returns

1: The mempool is full.
0: The mempool is not full.

Definition at line 1573 of file rte_mempool.h.

static int rte_mempool_empty ( const struct rte_mempool * mp )

inlinestatic

Test if the mempool is empty.

When cache is enabled, this function has to browse the length of all lcores, so it should not be used in a data path, but only for debug purposes. User-owned mempool caches are not accounted for.

Parameters

mp	A pointer to the mempool structure.

Returns

1: The mempool is empty.
0: The mempool is not empty.

Definition at line 1592 of file rte_mempool.h.

static rte_iova_t rte_mempool_virt2iova ( const void * elt )

inlinestatic

Return the IO address of elt, which is an element of the pool mp.

Parameters

elt	A pointer (virtual address) to the element of the pool.

Returns: The IO address of the elt element. If the mempool was created with MEMPOOL_F_NO_IOVA_CONTIG, the returned value is RTE_BAD_IOVA.

Definition at line 1608 of file rte_mempool.h.

void rte_mempool_audit ( struct rte_mempool * mp )

Check the consistency of mempool objects.

Verify the coherency of fields in the mempool structure. Also check that the cookies of mempool objects (even the ones that are not present in pool) have a correct value. If not, a panic will occur.

Parameters

mp	A pointer to the mempool structure.

static void* rte_mempool_get_priv ( struct rte_mempool * mp )

inlinestatic

Return a pointer to the private data in an mempool structure.

Parameters

mp	A pointer to the mempool structure.

Returns: A pointer to the private data.

Definition at line 1636 of file rte_mempool.h.

void rte_mempool_list_dump ( FILE * f )

Dump the status of all mempools on the console

Parameters

f	A pointer to a file for output

struct rte_mempool* rte_mempool_lookup ( const char * name )

Search a mempool from its name

Parameters

name	The name of the mempool.

Returns

The pointer to the mempool matching the name, or NULL if not found. NULL on error with rte_errno set appropriately. Possible rte_errno values include:

ENOENT - required entry not available to return.

Examples:: examples/multi_process/client_server_mp/mp_client/client.c, examples/multi_process/simple_mp/main.c, examples/multi_process/symmetric_mp/main.c, and examples/server_node_efd/node/node.c.

uint32_t rte_mempool_calc_obj_size	(	uint32_t	elt_size,
		uint32_t	flags,
		struct rte_mempool_objsz *	sz
	)

Get the header, trailer and total size of a mempool element.

Given a desired size of the mempool element and mempool flags, calculates header, trailer, body and total sizes of the mempool object.

Parameters

elt_size	The size of each element, without header and trailer.
flags	The flags used for the mempool creation. Consult rte_mempool_create() for more information about possible values. The size of each element.
sz	The calculated detailed size the mempool object. May be NULL.

Returns: Total size of the mempool object.

void rte_mempool_walk	(	void()(struct rte_mempool , void *arg)	func,
		void *	arg
	)

Walk list of all memory pools

Parameters

func	Iterator function
arg	Argument passed to iterator

Variable Documentation

struct rte_mempool_ops_table rte_mempool_ops_table

Array of registered ops structs.

Data Structures

Macros

Typedefs

Functions

Variables

Detailed Description

Macro Definition Documentation

Typedef Documentation

Function Documentation

Variable Documentation