#include <stddef.h>
#include <stdint.h>

Macros
#define	RTE_PTYPE_UNKNOWN 0x00000000
#define	RTE_PTYPE_L2_ETHER 0x00000001
#define	RTE_PTYPE_L2_ETHER_TIMESYNC 0x00000002
#define	RTE_PTYPE_L2_ETHER_ARP 0x00000003
#define	RTE_PTYPE_L2_ETHER_LLDP 0x00000004
#define	RTE_PTYPE_L2_ETHER_NSH 0x00000005
#define	RTE_PTYPE_L2_ETHER_VLAN 0x00000006
#define	RTE_PTYPE_L2_ETHER_QINQ 0x00000007
#define	RTE_PTYPE_L2_ETHER_PPPOE 0x00000008
#define	RTE_PTYPE_L2_MASK 0x0000000f
#define	RTE_PTYPE_L3_IPV4 0x00000010
#define	RTE_PTYPE_L3_IPV4_EXT 0x00000030
#define	RTE_PTYPE_L3_IPV6 0x00000040
#define	RTE_PTYPE_L3_IPV4_EXT_UNKNOWN 0x00000090
#define	RTE_PTYPE_L3_IPV6_EXT 0x000000c0
#define	RTE_PTYPE_L3_IPV6_EXT_UNKNOWN 0x000000e0
#define	RTE_PTYPE_L3_MASK 0x000000f0
#define	RTE_PTYPE_L4_TCP 0x00000100
#define	RTE_PTYPE_L4_UDP 0x00000200
#define	RTE_PTYPE_L4_FRAG 0x00000300
#define	RTE_PTYPE_L4_SCTP 0x00000400
#define	RTE_PTYPE_L4_ICMP 0x00000500
#define	RTE_PTYPE_L4_NONFRAG 0x00000600
#define	RTE_PTYPE_L4_MASK 0x00000f00
#define	RTE_PTYPE_TUNNEL_IP 0x00001000
#define	RTE_PTYPE_TUNNEL_GRE 0x00002000
#define	RTE_PTYPE_TUNNEL_VXLAN 0x00003000
#define	RTE_PTYPE_TUNNEL_NVGRE 0x00004000
#define	RTE_PTYPE_TUNNEL_GENEVE 0x00005000
#define	RTE_PTYPE_TUNNEL_GRENAT 0x00006000
#define	RTE_PTYPE_TUNNEL_GTPC 0x00007000
#define	RTE_PTYPE_TUNNEL_GTPU 0x00008000
#define	RTE_PTYPE_TUNNEL_ESP 0x00009000
#define	RTE_PTYPE_TUNNEL_L2TP 0x0000a000
#define	RTE_PTYPE_TUNNEL_VXLAN_GPE 0x0000b000
#define	RTE_PTYPE_TUNNEL_MPLS_IN_GRE 0x0000c000
#define	RTE_PTYPE_TUNNEL_MPLS_IN_UDP 0x0000d000
#define	RTE_PTYPE_TUNNEL_MASK 0x0000f000
#define	RTE_PTYPE_INNER_L2_ETHER 0x00010000
#define	RTE_PTYPE_INNER_L2_ETHER_VLAN 0x00020000
#define	RTE_PTYPE_INNER_L2_ETHER_QINQ 0x00030000
#define	RTE_PTYPE_INNER_L2_MASK 0x000f0000
#define	RTE_PTYPE_INNER_L3_IPV4 0x00100000
#define	RTE_PTYPE_INNER_L3_IPV4_EXT 0x00200000
#define	RTE_PTYPE_INNER_L3_IPV6 0x00300000
#define	RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN 0x00400000
#define	RTE_PTYPE_INNER_L3_IPV6_EXT 0x00500000
#define	RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN 0x00600000
#define	RTE_PTYPE_INNER_L3_MASK 0x00f00000
#define	RTE_PTYPE_INNER_L4_TCP 0x01000000
#define	RTE_PTYPE_INNER_L4_UDP 0x02000000
#define	RTE_PTYPE_INNER_L4_FRAG 0x03000000
#define	RTE_PTYPE_INNER_L4_SCTP 0x04000000
#define	RTE_PTYPE_INNER_L4_ICMP 0x05000000
#define	RTE_PTYPE_INNER_L4_NONFRAG 0x06000000
#define	RTE_PTYPE_INNER_L4_MASK 0x0f000000
#define	RTE_PTYPE_ALL_MASK 0x0fffffff
#define	RTE_ETH_IS_IPV4_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV4)
#define	RTE_ETH_IS_IPV6_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV6)

Functions
const char *	rte_get_ptype_l2_name (uint32_t ptype)
const char *	rte_get_ptype_l3_name (uint32_t ptype)
const char *	rte_get_ptype_l4_name (uint32_t ptype)
const char *	rte_get_ptype_tunnel_name (uint32_t ptype)
const char *	rte_get_ptype_inner_l2_name (uint32_t ptype)
const char *	rte_get_ptype_inner_l3_name (uint32_t ptype)
const char *	rte_get_ptype_inner_l4_name (uint32_t ptype)
int	rte_get_ptype_name (uint32_t ptype, char *buf, size_t buflen)

Detailed Description

RTE Mbuf Packet Types

This file contains declarations for features related to mbuf packet types. The packet type gives information about the data carried by the mbuf, and is stored in the mbuf in a 32 bits field.

The 32 bits are divided into several fields to mark packet types. Note that each field is indexical.

Bit 3:0 is for L2 types.
Bit 7:4 is for L3 or outer L3 (for tunneling case) types.
Bit 11:8 is for L4 or outer L4 (for tunneling case) types.
Bit 15:12 is for tunnel types.
Bit 19:16 is for inner L2 types.
Bit 23:20 is for inner L3 types.
Bit 27:24 is for inner L4 types.
Bit 31:28 is reserved.

To be compatible with Vector PMD, RTE_PTYPE_L3_IPV4, RTE_PTYPE_L3_IPV4_EXT, RTE_PTYPE_L3_IPV6, RTE_PTYPE_L3_IPV6_EXT, RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP and RTE_PTYPE_L4_SCTP should be kept as below in a contiguous 7 bits.

Note that L3 types values are selected for checking IPV4/IPV6 header from performance point of view. Reading annotations of RTE_ETH_IS_IPV4_HDR and RTE_ETH_IS_IPV6_HDR is needed for any future changes of L3 type values.

Note that the packet types of the same packet recognized by different hardware may be different, as different hardware may have different capability of packet type recognition.

Definition in file rte_mbuf_ptype.h.

Macro Definition Documentation

#define RTE_PTYPE_UNKNOWN 0x00000000

No packet type information.

Examples:: examples/ip_fragmentation/main.c, examples/l3fwd-power/main.c, examples/l3fwd/l3fwd_em.c, examples/l3fwd/l3fwd_lpm.c, and examples/performance-thread/l3fwd-thread/main.c.

Definition at line 75 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L2_ETHER 0x00000001

Ethernet packet type. It is used for outer packet for tunneling cases.

Packet format: <'ether type'=[0x0800|0x86DD]>

Definition at line 83 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L2_ETHER_TIMESYNC 0x00000002

Ethernet packet type for time sync.

Packet format: <'ether type'=0x88F7>

Definition at line 90 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L2_ETHER_ARP 0x00000003

ARP (Address Resolution Protocol) packet type.

Packet format: <'ether type'=0x0806>

Definition at line 97 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L2_ETHER_LLDP 0x00000004

LLDP (Link Layer Discovery Protocol) packet type.

Packet format: <'ether type'=0x88CC>

Definition at line 104 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L2_ETHER_NSH 0x00000005

NSH (Network Service Header) packet type.

Packet format: <'ether type'=0x894F>

Definition at line 111 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L2_ETHER_VLAN 0x00000006

VLAN packet type.

Packet format: <'ether type'=[0x8100]>

Definition at line 118 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L2_ETHER_QINQ 0x00000007

QinQ packet type.

Packet format: <'ether type'=[0x88A8]>

Definition at line 125 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L2_ETHER_PPPOE 0x00000008

PPPOE packet type.

Packet format: <'ether type'=[0x8863|0x8864]>

Definition at line 132 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L2_MASK 0x0000000f

Mask of layer 2 packet types. It is used for outer packet for tunneling cases.

Definition at line 137 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L3_IPV4 0x00000010

IP (Internet Protocol) version 4 packet type. It is used for outer packet for tunneling cases, and does not contain any header option.

Packet format: <'ether type'=0x0800 | 'version'=4, 'ihl'=5>

Examples:: examples/ip_fragmentation/main.c, examples/l3fwd-power/main.c, examples/l3fwd/l3fwd_em.c, examples/l3fwd/l3fwd_lpm.c, and examples/performance-thread/l3fwd-thread/main.c.

Definition at line 147 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L3_IPV4_EXT 0x00000030

IP (Internet Protocol) version 4 packet type. It is used for outer packet for tunneling cases, and contains header options.

Packet format: <'ether type'=0x0800 | 'version'=4, 'ihl'=[6-15], 'options'>

Examples:: examples/l3fwd/l3fwd_em.c.

Definition at line 157 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L3_IPV6 0x00000040

IP (Internet Protocol) version 6 packet type. It is used for outer packet for tunneling cases, and does not contain any extension header.

Packet format: <'ether type'=0x86DD | 'version'=6, 'next header'=0x3B>

Examples:: examples/ip_fragmentation/main.c, examples/l3fwd-power/main.c, examples/l3fwd/l3fwd_em.c, examples/l3fwd/l3fwd_lpm.c, and examples/performance-thread/l3fwd-thread/main.c.

Definition at line 167 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L3_IPV4_EXT_UNKNOWN 0x00000090

IP (Internet Protocol) version 4 packet type. It is used for outer packet for tunneling cases, and may or maynot contain header options.

Packet format: <'ether type'=0x0800 | 'version'=4, 'ihl'=[5-15], <'options'>>

Examples:: examples/ip_fragmentation/main.c, examples/l3fwd-power/main.c, examples/l3fwd/l3fwd_lpm.c, and examples/performance-thread/l3fwd-thread/main.c.

Definition at line 177 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L3_IPV6_EXT 0x000000c0

IP (Internet Protocol) version 6 packet type. It is used for outer packet for tunneling cases, and contains extension headers.

Packet format: <'ether type'=0x86DD | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], 'extension headers'>

Examples:: examples/l3fwd/l3fwd_em.c.

Definition at line 188 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L3_IPV6_EXT_UNKNOWN 0x000000e0

IP (Internet Protocol) version 6 packet type. It is used for outer packet for tunneling cases, and may or maynot contain extension headers.

Packet format: <'ether type'=0x86DD | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], <'extension headers'>>

Examples:: examples/ip_fragmentation/main.c, examples/l3fwd-power/main.c, examples/l3fwd/l3fwd_em.c, examples/l3fwd/l3fwd_lpm.c, and examples/performance-thread/l3fwd-thread/main.c.

Definition at line 199 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L3_MASK 0x000000f0

Mask of layer 3 packet types. It is used for outer packet for tunneling cases.

Examples:: examples/ip_fragmentation/main.c, examples/l3fwd-power/main.c, examples/l3fwd/l3fwd_em.c, examples/l3fwd/l3fwd_lpm.c, and examples/performance-thread/l3fwd-thread/main.c.

Definition at line 204 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L4_TCP 0x00000100

TCP (Transmission Control Protocol) packet type. It is used for outer packet for tunneling cases.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=6, 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=6>

Examples:: examples/l3fwd/l3fwd_em.c.

Definition at line 216 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L4_UDP 0x00000200

UDP (User Datagram Protocol) packet type. It is used for outer packet for tunneling cases.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=17, 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17>

Examples:: examples/l3fwd/l3fwd_em.c.

Definition at line 228 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L4_FRAG 0x00000300

Fragmented IP (Internet Protocol) packet type. It is used for outer packet for tunneling cases.

It refers to those packets of any IP types, which can be recognized as fragmented. A fragmented packet cannot be recognized as any other L4 types (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP, RTE_PTYPE_L4_NONFRAG).

Packet format: <'ether type'=0x0800 | 'version'=4, 'MF'=1> or, <'ether type'=0x0800 | 'version'=4, 'frag_offset'!=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=44>

Definition at line 248 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L4_SCTP 0x00000400

SCTP (Stream Control Transmission Protocol) packet type. It is used for outer packet for tunneling cases.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=132, 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=132>

Definition at line 260 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L4_ICMP 0x00000500

ICMP (Internet Control Message Protocol) packet type. It is used for outer packet for tunneling cases.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=1, 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=1>

Definition at line 272 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L4_NONFRAG 0x00000600

Non-fragmented IP (Internet Protocol) packet type. It is used for outer packet for tunneling cases.

It refers to those packets of any IP types, while cannot be recognized as any of above L4 types (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, RTE_PTYPE_L4_FRAG, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP).

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'!=[6|17|44|132|1]>

Definition at line 288 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_L4_MASK 0x00000f00

Mask of layer 4 packet types. It is used for outer packet for tunneling cases.

Examples:: examples/l3fwd/l3fwd_em.c.

Definition at line 293 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_TUNNEL_IP 0x00001000

IP (Internet Protocol) in IP (Internet Protocol) tunneling packet type.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=[4|41]> or, <'ether type'=0x86DD | 'version'=6, 'next header'=[4|41]>

Definition at line 304 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_TUNNEL_GRE 0x00002000

GRE (Generic Routing Encapsulation) tunneling packet type.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=47> or, <'ether type'=0x86DD | 'version'=6, 'next header'=47>

Definition at line 315 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_TUNNEL_VXLAN 0x00003000

VXLAN (Virtual eXtensible Local Area Network) tunneling packet type.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=17 | 'destination port'=4789> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17 | 'destination port'=4789>

Definition at line 328 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_TUNNEL_NVGRE 0x00004000

NVGRE (Network Virtualization using Generic Routing Encapsulation) tunneling packet type.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=47 | 'protocol type'=0x6558> or, <'ether type'=0x86DD | 'version'=6, 'next header'=47 | 'protocol type'=0x6558'>

Definition at line 342 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_TUNNEL_GENEVE 0x00005000

GENEVE (Generic Network Virtualization Encapsulation) tunneling packet type.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=17 | 'destination port'=6081> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17 | 'destination port'=6081>

Definition at line 355 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_TUNNEL_GRENAT 0x00006000

Tunneling packet type of Teredo, VXLAN (Virtual eXtensible Local Area Network) or GRE (Generic Routing Encapsulation) could be recognized as this packet type, if they can not be recognized independently as of hardware capability.

Definition at line 362 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_TUNNEL_GTPC 0x00007000

GTP-C (GPRS Tunnelling Protocol) control tunneling packet type. Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=17 | 'destination port'=2123> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17 | 'destination port'=2123> or, <'ether type'=0x0800 | 'version'=4, 'protocol'=17 | 'source port'=2123> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17 | 'source port'=2123>

Definition at line 382 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_TUNNEL_GTPU 0x00008000

GTP-U (GPRS Tunnelling Protocol) user data tunneling packet type. Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=17 | 'destination port'=2152> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17 | 'destination port'=2152>

Definition at line 394 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_TUNNEL_ESP 0x00009000

ESP (IP Encapsulating Security Payload) tunneling packet type.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=51> or, <'ether type'=0x86DD | 'version'=6, 'next header'=51>

Examples:: examples/ipsec-secgw/esp.c.

Definition at line 405 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_TUNNEL_L2TP 0x0000a000

L2TP (Layer 2 Tunneling Protocol) tunnleing packet type.

Definition at line 424 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_TUNNEL_VXLAN_GPE 0x0000b000

VXLAN-GPE (VXLAN Generic Protocol Extension) tunneling packet type.

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=17 | 'destination port'=4790> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17 | 'destination port'=4790>

Definition at line 437 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_TUNNEL_MPLS_IN_GRE 0x0000c000

MPLS-in-GRE tunneling packet type (RFC 4023).

Definition at line 458 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_TUNNEL_MPLS_IN_UDP 0x0000d000

MPLS-in-UDP tunneling packet type (RFC 7510).

Packet format: <'ether type'=0x0800 | 'version'=4, 'protocol'=17 | 'destination port'=6635> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17 | 'destination port'=6635>

Definition at line 471 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_TUNNEL_MASK 0x0000f000

Mask of tunneling packet types.

Examples:: examples/tep_termination/vxlan.c.

Definition at line 475 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L2_ETHER 0x00010000

Ethernet packet type. It is used for inner packet type only.

Packet format (inner only): <'ether type'=[0x800|0x86DD]>

Definition at line 483 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L2_ETHER_VLAN 0x00020000

Ethernet packet type with VLAN (Virtual Local Area Network) tag.

Packet format (inner only): <'ether type'=[0x800|0x86DD], vlan=[1-4095]>

Definition at line 490 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L2_ETHER_QINQ 0x00030000

QinQ packet type.

Packet format: <'ether type'=[0x88A8]>

Definition at line 497 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L2_MASK 0x000f0000

Mask of inner layer 2 packet types.

Definition at line 501 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L3_IPV4 0x00100000

IP (Internet Protocol) version 4 packet type. It is used for inner packet only, and does not contain any header option.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'ihl'=5>

Definition at line 510 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L3_IPV4_EXT 0x00200000

IP (Internet Protocol) version 4 packet type. It is used for inner packet only, and contains header options.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'ihl'=[6-15], 'options'>

Definition at line 519 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L3_IPV6 0x00300000

IP (Internet Protocol) version 6 packet type. It is used for inner packet only, and does not contain any extension header.

Packet format (inner only): <'ether type'=0x86DD | 'version'=6, 'next header'=0x3B>

Definition at line 528 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN 0x00400000

IP (Internet Protocol) version 4 packet type. It is used for inner packet only, and may or maynot contain header options.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'ihl'=[5-15], <'options'>>

Definition at line 537 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L3_IPV6_EXT 0x00500000

IP (Internet Protocol) version 6 packet type. It is used for inner packet only, and contains extension headers.

Packet format (inner only): <'ether type'=0x86DD | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], 'extension headers'>

Definition at line 547 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN 0x00600000

IP (Internet Protocol) version 6 packet type. It is used for inner packet only, and may or maynot contain extension headers.

Packet format (inner only): <'ether type'=0x86DD | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], <'extension headers'>>

Definition at line 558 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L3_MASK 0x00f00000

Mask of inner layer 3 packet types.

Definition at line 562 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L4_TCP 0x01000000

TCP (Transmission Control Protocol) packet type. It is used for inner packet only.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'protocol'=6, 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=6>

Definition at line 574 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L4_UDP 0x02000000

UDP (User Datagram Protocol) packet type. It is used for inner packet only.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'protocol'=17, 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=17>

Definition at line 586 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L4_FRAG 0x03000000

Fragmented IP (Internet Protocol) packet type. It is used for inner packet only, and may or maynot have layer 4 packet.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'MF'=1> or, <'ether type'=0x0800 | 'version'=4, 'frag_offset'!=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=44>

Definition at line 601 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L4_SCTP 0x04000000

SCTP (Stream Control Transmission Protocol) packet type. It is used for inner packet only.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'protocol'=132, 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=132>

Definition at line 613 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L4_ICMP 0x05000000

ICMP (Internet Control Message Protocol) packet type. It is used for inner packet only.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'protocol'=1, 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'=1>

Definition at line 625 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L4_NONFRAG 0x06000000

Non-fragmented IP (Internet Protocol) packet type. It is used for inner packet only, and may or maynot have other unknown layer 4 packet types.

Packet format (inner only): <'ether type'=0x0800 | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0, 'frag_offset'=0> or, <'ether type'=0x86DD | 'version'=6, 'next header'!=[6|17|44|132|1]>

Definition at line 638 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_INNER_L4_MASK 0x0f000000

Mask of inner layer 4 packet types.

Definition at line 642 of file rte_mbuf_ptype.h.

#define RTE_PTYPE_ALL_MASK 0x0fffffff

All valid layer masks.

Definition at line 646 of file rte_mbuf_ptype.h.

#define RTE_ETH_IS_IPV4_HDR ( ptype ) ((ptype) & RTE_PTYPE_L3_IPV4)

Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by one, bit 4 is selected to be used for IPv4 only. Then checking bit 4 can determine if it is an IPV4 packet.

Examples:: examples/ip_fragmentation/main.c, examples/ip_reassembly/main.c, examples/l3fwd-acl/main.c, examples/l3fwd-power/main.c, examples/l3fwd/l3fwd_lpm.c, and examples/performance-thread/l3fwd-thread/main.c.

Definition at line 653 of file rte_mbuf_ptype.h.

#define RTE_ETH_IS_IPV6_HDR ( ptype ) ((ptype) & RTE_PTYPE_L3_IPV6)

Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by one, bit 6 is selected to be used for IPv4 only. Then checking bit 6 can determine if it is an IPV4 packet.

Examples:: examples/ip_fragmentation/main.c, examples/ip_reassembly/main.c, examples/l3fwd-acl/main.c, examples/l3fwd-power/main.c, examples/l3fwd/l3fwd_lpm.c, and examples/performance-thread/l3fwd-thread/main.c.

Definition at line 660 of file rte_mbuf_ptype.h.

Function Documentation

const char* rte_get_ptype_l2_name ( uint32_t ptype )

Get the name of the l2 packet type

Parameters

ptype The packet type value.

Returns: A non-null string describing the packet type.

const char* rte_get_ptype_l3_name ( uint32_t ptype )

Get the name of the l3 packet type

Parameters

ptype The packet type value.

Returns: A non-null string describing the packet type.

const char* rte_get_ptype_l4_name ( uint32_t ptype )

Get the name of the l4 packet type

Parameters

ptype The packet type value.

Returns: A non-null string describing the packet type.

const char* rte_get_ptype_tunnel_name ( uint32_t ptype )

Get the name of the tunnel packet type

Parameters

ptype The packet type value.

Returns: A non-null string describing the packet type.

const char* rte_get_ptype_inner_l2_name ( uint32_t ptype )

Get the name of the inner_l2 packet type

Parameters

ptype The packet type value.

Returns: A non-null string describing the packet type.

const char* rte_get_ptype_inner_l3_name ( uint32_t ptype )

Get the name of the inner_l3 packet type

Parameters

ptype The packet type value.

Returns: A non-null string describing the packet type.

const char* rte_get_ptype_inner_l4_name ( uint32_t ptype )

Get the name of the inner_l4 packet type

Parameters

ptype The packet type value.

Returns: A non-null string describing the packet type.

int rte_get_ptype_name	(	uint32_t	ptype,
		char *	buf,
		size_t	buflen
	)

Write the packet type name into the buffer

Parameters

ptype	The packet type value.
buf	The buffer where the string is written.
buflen	The length of the buffer.

Returns

0 on success
(-1) if the buffer is too small

Macros

Functions

Detailed Description

Macro Definition Documentation

Function Documentation