DPDK  16.04.0
exception_path/main.c
/*-
* BSD LICENSE
*
* Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <inttypes.h>
#include <string.h>
#include <sys/queue.h>
#include <stdarg.h>
#include <errno.h>
#include <getopt.h>
#include <netinet/in.h>
#include <linux/if.h>
#include <linux/if_tun.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <unistd.h>
#include <signal.h>
#include <rte_common.h>
#include <rte_log.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_memzone.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_atomic.h>
#include <rte_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_ring.h>
#include <rte_log.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_string_fns.h>
#include <rte_cycles.h>
/* Macros for printing using RTE_LOG */
#define RTE_LOGTYPE_APP RTE_LOGTYPE_USER1
#define FATAL_ERROR(fmt, args...) rte_exit(EXIT_FAILURE, fmt "\n", ##args)
#define PRINT_INFO(fmt, args...) RTE_LOG(INFO, APP, fmt "\n", ##args)
/* Max ports than can be used (each port is associated with two lcores) */
#define MAX_PORTS (RTE_MAX_LCORE / 2)
/* Max size of a single packet */
#define MAX_PACKET_SZ (2048)
/* Size of the data buffer in each mbuf */
#define MBUF_DATA_SZ (MAX_PACKET_SZ + RTE_PKTMBUF_HEADROOM)
/* Number of mbufs in mempool that is created */
#define NB_MBUF 8192
/* How many packets to attempt to read from NIC in one go */
#define PKT_BURST_SZ 32
/* How many objects (mbufs) to keep in per-lcore mempool cache */
#define MEMPOOL_CACHE_SZ PKT_BURST_SZ
/* Number of RX ring descriptors */
#define NB_RXD 128
/* Number of TX ring descriptors */
#define NB_TXD 512
/*
* RX and TX Prefetch, Host, and Write-back threshold values should be
* carefully set for optimal performance. Consult the network
* controller's datasheet and supporting DPDK documentation for guidance
* on how these parameters should be set.
*/
/* Options for configuring ethernet port */
static const struct rte_eth_conf port_conf = {
.rxmode = {
.header_split = 0, /* Header Split disabled */
.hw_ip_checksum = 0, /* IP checksum offload disabled */
.hw_vlan_filter = 0, /* VLAN filtering disabled */
.jumbo_frame = 0, /* Jumbo Frame Support disabled */
.hw_strip_crc = 0, /* CRC stripped by hardware */
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
},
};
/* Mempool for mbufs */
static struct rte_mempool * pktmbuf_pool = NULL;
/* Mask of enabled ports */
static uint32_t ports_mask = 0;
/* Mask of cores that read from NIC and write to tap */
static uint64_t input_cores_mask = 0;
/* Mask of cores that read from tap and write to NIC */
static uint64_t output_cores_mask = 0;
/* Array storing port_id that is associated with each lcore */
static uint8_t port_ids[RTE_MAX_LCORE];
/* Structure type for recording lcore-specific stats */
struct stats {
uint64_t rx;
uint64_t tx;
uint64_t dropped;
};
/* Array of lcore-specific stats */
static struct stats lcore_stats[RTE_MAX_LCORE];
/* Print out statistics on packets handled */
static void
print_stats(void)
{
unsigned i;
printf("\n**Exception-Path example application statistics**\n"
"======= ====== ============ ============ ===============\n"
" Lcore Port RX TX Dropped on TX\n"
"------- ------ ------------ ------------ ---------------\n");
RTE_LCORE_FOREACH(i) {
printf("%6u %7u %13"PRIu64" %13"PRIu64" %16"PRIu64"\n",
i, (unsigned)port_ids[i],
lcore_stats[i].rx, lcore_stats[i].tx,
lcore_stats[i].dropped);
}
printf("======= ====== ============ ============ ===============\n");
}
/* Custom handling of signals to handle stats */
static void
signal_handler(int signum)
{
/* When we receive a USR1 signal, print stats */
if (signum == SIGUSR1) {
print_stats();
}
/* When we receive a USR2 signal, reset stats */
if (signum == SIGUSR2) {
memset(&lcore_stats, 0, sizeof(lcore_stats));
printf("\n**Statistics have been reset**\n");
return;
}
}
/*
* Create a tap network interface, or use existing one with same name.
* If name[0]='\0' then a name is automatically assigned and returned in name.
*/
static int tap_create(char *name)
{
struct ifreq ifr;
int fd, ret;
fd = open("/dev/net/tun", O_RDWR);
if (fd < 0)
return fd;
memset(&ifr, 0, sizeof(ifr));
/* TAP device without packet information */
ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
if (name && *name)
snprintf(ifr.ifr_name, IFNAMSIZ, "%s", name);
ret = ioctl(fd, TUNSETIFF, (void *) &ifr);
if (ret < 0) {
close(fd);
return ret;
}
if (name)
snprintf(name, IFNAMSIZ, "%s", ifr.ifr_name);
return fd;
}
/* Main processing loop */
static int
main_loop(__attribute__((unused)) void *arg)
{
const unsigned lcore_id = rte_lcore_id();
char tap_name[IFNAMSIZ];
int tap_fd;
if ((1ULL << lcore_id) & input_cores_mask) {
/* Create new tap interface */
snprintf(tap_name, IFNAMSIZ, "tap_dpdk_%.2u", lcore_id);
tap_fd = tap_create(tap_name);
if (tap_fd < 0)
FATAL_ERROR("Could not create tap interface \"%s\" (%d)",
tap_name, tap_fd);
PRINT_INFO("Lcore %u is reading from port %u and writing to %s",
lcore_id, (unsigned)port_ids[lcore_id], tap_name);
fflush(stdout);
/* Loop forever reading from NIC and writing to tap */
for (;;) {
struct rte_mbuf *pkts_burst[PKT_BURST_SZ];
unsigned i;
const unsigned nb_rx =
rte_eth_rx_burst(port_ids[lcore_id], 0,
pkts_burst, PKT_BURST_SZ);
lcore_stats[lcore_id].rx += nb_rx;
for (i = 0; likely(i < nb_rx); i++) {
struct rte_mbuf *m = pkts_burst[i];
/* Ignore return val from write() */
int ret = write(tap_fd,
rte_pktmbuf_mtod(m, void*),
rte_pktmbuf_data_len(m));
rte_pktmbuf_free(m);
if (unlikely(ret < 0))
lcore_stats[lcore_id].dropped++;
else
lcore_stats[lcore_id].tx++;
}
}
}
else if ((1ULL << lcore_id) & output_cores_mask) {
/* Create new tap interface */
snprintf(tap_name, IFNAMSIZ, "tap_dpdk_%.2u", lcore_id);
tap_fd = tap_create(tap_name);
if (tap_fd < 0)
FATAL_ERROR("Could not create tap interface \"%s\" (%d)",
tap_name, tap_fd);
PRINT_INFO("Lcore %u is reading from %s and writing to port %u",
lcore_id, tap_name, (unsigned)port_ids[lcore_id]);
fflush(stdout);
/* Loop forever reading from tap and writing to NIC */
for (;;) {
int ret;
struct rte_mbuf *m = rte_pktmbuf_alloc(pktmbuf_pool);
if (m == NULL)
continue;
ret = read(tap_fd, rte_pktmbuf_mtod(m, void *),
MAX_PACKET_SZ);
lcore_stats[lcore_id].rx++;
if (unlikely(ret < 0)) {
FATAL_ERROR("Reading from %s interface failed",
tap_name);
}
m->nb_segs = 1;
m->next = NULL;
m->pkt_len = (uint16_t)ret;
m->data_len = (uint16_t)ret;
ret = rte_eth_tx_burst(port_ids[lcore_id], 0, &m, 1);
if (unlikely(ret < 1)) {
rte_pktmbuf_free(m);
lcore_stats[lcore_id].dropped++;
}
else {
lcore_stats[lcore_id].tx++;
}
}
}
else {
PRINT_INFO("Lcore %u has nothing to do", lcore_id);
return 0;
}
/*
* Tap file is closed automatically when program exits. Putting close()
* here will cause the compiler to give an error about unreachable code.
*/
}
/* Display usage instructions */
static void
print_usage(const char *prgname)
{
PRINT_INFO("\nUsage: %s [EAL options] -- -p PORTMASK -i IN_CORES -o OUT_CORES\n"
" -p PORTMASK: hex bitmask of ports to use\n"
" -i IN_CORES: hex bitmask of cores which read from NIC\n"
" -o OUT_CORES: hex bitmask of cores which write to NIC",
prgname);
}
/* Convert string to unsigned number. 0 is returned if error occurs */
static uint64_t
parse_unsigned(const char *portmask)
{
char *end = NULL;
uint64_t num;
num = strtoull(portmask, &end, 16);
if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
return 0;
return (uint64_t)num;
}
/* Record affinities between ports and lcores in global port_ids[] array */
static void
setup_port_lcore_affinities(void)
{
unsigned long i;
uint8_t tx_port = 0;
uint8_t rx_port = 0;
/* Setup port_ids[] array, and check masks were ok */
RTE_LCORE_FOREACH(i) {
if (input_cores_mask & (1ULL << i)) {
/* Skip ports that are not enabled */
while ((ports_mask & (1 << rx_port)) == 0) {
rx_port++;
if (rx_port > (sizeof(ports_mask) * 8))
goto fail; /* not enough ports */
}
port_ids[i] = rx_port++;
}
else if (output_cores_mask & (1ULL << i)) {
/* Skip ports that are not enabled */
while ((ports_mask & (1 << tx_port)) == 0) {
tx_port++;
if (tx_port > (sizeof(ports_mask) * 8))
goto fail; /* not enough ports */
}
port_ids[i] = tx_port++;
}
}
if (rx_port != tx_port)
goto fail; /* uneven number of cores in masks */
if (ports_mask & (~((1 << rx_port) - 1)))
goto fail; /* unused ports */
return;
fail:
FATAL_ERROR("Invalid core/port masks specified on command line");
}
/* Parse the arguments given in the command line of the application */
static void
parse_args(int argc, char **argv)
{
int opt;
const char *prgname = argv[0];
/* Disable printing messages within getopt() */
opterr = 0;
/* Parse command line */
while ((opt = getopt(argc, argv, "i:o:p:")) != EOF) {
switch (opt) {
case 'i':
input_cores_mask = parse_unsigned(optarg);
break;
case 'o':
output_cores_mask = parse_unsigned(optarg);
break;
case 'p':
ports_mask = parse_unsigned(optarg);
break;
default:
print_usage(prgname);
FATAL_ERROR("Invalid option specified");
}
}
/* Check that options were parsed ok */
if (input_cores_mask == 0) {
print_usage(prgname);
FATAL_ERROR("IN_CORES not specified correctly");
}
if (output_cores_mask == 0) {
print_usage(prgname);
FATAL_ERROR("OUT_CORES not specified correctly");
}
if (ports_mask == 0) {
print_usage(prgname);
FATAL_ERROR("PORTMASK not specified correctly");
}
setup_port_lcore_affinities();
}
/* Initialise a single port on an Ethernet device */
static void
init_port(uint8_t port)
{
int ret;
/* Initialise device and RX/TX queues */
PRINT_INFO("Initialising port %u ...", (unsigned)port);
fflush(stdout);
ret = rte_eth_dev_configure(port, 1, 1, &port_conf);
if (ret < 0)
FATAL_ERROR("Could not configure port%u (%d)",
(unsigned)port, ret);
ret = rte_eth_rx_queue_setup(port, 0, NB_RXD, rte_eth_dev_socket_id(port),
NULL,
pktmbuf_pool);
if (ret < 0)
FATAL_ERROR("Could not setup up RX queue for port%u (%d)",
(unsigned)port, ret);
ret = rte_eth_tx_queue_setup(port, 0, NB_TXD, rte_eth_dev_socket_id(port),
NULL);
if (ret < 0)
FATAL_ERROR("Could not setup up TX queue for port%u (%d)",
(unsigned)port, ret);
ret = rte_eth_dev_start(port);
if (ret < 0)
FATAL_ERROR("Could not start port%u (%d)", (unsigned)port, ret);
rte_eth_promiscuous_enable(port);
}
/* Check the link status of all ports in up to 9s, and print them finally */
static void
check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
uint8_t portid, count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
printf("\nChecking link status");
fflush(stdout);
for (count = 0; count <= MAX_CHECK_TIME; count++) {
all_ports_up = 1;
for (portid = 0; portid < port_num; portid++) {
if ((port_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
rte_eth_link_get_nowait(portid, &link);
/* print link status if flag set */
if (print_flag == 1) {
if (link.link_status)
printf("Port %d Link Up - speed %u "
"Mbps - %s\n", (uint8_t)portid,
(unsigned)link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
("full-duplex") : ("half-duplex\n"));
else
printf("Port %d Link Down\n",
(uint8_t)portid);
continue;
}
/* clear all_ports_up flag if any link down */
if (link.link_status == ETH_LINK_DOWN) {
all_ports_up = 0;
break;
}
}
/* after finally printing all link status, get out */
if (print_flag == 1)
break;
if (all_ports_up == 0) {
printf(".");
fflush(stdout);
rte_delay_ms(CHECK_INTERVAL);
}
/* set the print_flag if all ports up or timeout */
if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
print_flag = 1;
printf("done\n");
}
}
}
/* Initialise ports/queues etc. and start main loop on each core */
int
main(int argc, char** argv)
{
int ret;
unsigned i,high_port;
uint8_t nb_sys_ports, port;
/* Associate signal_hanlder function with USR signals */
signal(SIGUSR1, signal_handler);
signal(SIGUSR2, signal_handler);
/* Initialise EAL */
ret = rte_eal_init(argc, argv);
if (ret < 0)
FATAL_ERROR("Could not initialise EAL (%d)", ret);
argc -= ret;
argv += ret;
/* Parse application arguments (after the EAL ones) */
parse_args(argc, argv);
/* Create the mbuf pool */
pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF,
MEMPOOL_CACHE_SZ, 0, MBUF_DATA_SZ, rte_socket_id());
if (pktmbuf_pool == NULL) {
FATAL_ERROR("Could not initialise mbuf pool");
return -1;
}
/* Get number of ports found in scan */
nb_sys_ports = rte_eth_dev_count();
if (nb_sys_ports == 0)
FATAL_ERROR("No supported Ethernet device found");
/* Find highest port set in portmask */
for (high_port = (sizeof(ports_mask) * 8) - 1;
(high_port != 0) && !(ports_mask & (1 << high_port));
high_port--)
; /* empty body */
if (high_port > nb_sys_ports)
FATAL_ERROR("Port mask requires more ports than available");
/* Initialise each port */
for (port = 0; port < nb_sys_ports; port++) {
/* Skip ports that are not enabled */
if ((ports_mask & (1 << port)) == 0) {
continue;
}
init_port(port);
}
check_all_ports_link_status(nb_sys_ports, ports_mask);
/* Launch per-lcore function on every lcore */
rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
RTE_LCORE_FOREACH_SLAVE(i) {
if (rte_eal_wait_lcore(i) < 0)
return -1;
}
return 0;
}
Generated by   doxygen 1.8.1.2