.. SPDX-License-Identifier: BSD-3-Clause Copyright(C) 2020 Marvell International Ltd. Trace Library ============= Overview -------- *Tracing* is a technique used to understand what goes on in a running software system. The software used for tracing is called a *tracer*, which is conceptually similar to a tape recorder. When recording, specific instrumentation points placed in the software source code generate events that are saved on a giant tape: a trace file. The trace file then later can be opened in *trace viewers* to visualize and analyze the trace events with timestamps and multi-core views. Such a mechanism will be useful for resolving a wide range of problems such as multi-core synchronization issues, latency measurements, finding out the post analysis information like CPU idle time, etc that would otherwise be extremely challenging to get. Tracing is often compared to *logging*. However, tracers and loggers are two different tools, serving two different purposes. Tracers are designed to record much lower-level events that occur much more frequently than log messages, often in the range of thousands per second, with very little execution overhead. Logging is more appropriate for a very high-level analysis of less frequent events: user accesses, exceptional conditions (errors and warnings, for example), database transactions, instant messaging communications, and such. Simply put, logging is one of the many use cases that can be satisfied with tracing. DPDK tracing library features ----------------------------- - A framework to add tracepoints in control and fast path APIs with minimum impact on performance. Typical trace overhead is ~20 cycles and instrumentation overhead is 1 cycle. - Enable and disable the tracepoints at runtime. - Save the trace buffer to the filesystem at any point in time. - Support ``overwrite`` and ``discard`` trace mode operations. - String-based tracepoint object lookup. - Enable and disable a set of tracepoints based on regular expression and/or globbing. - Generate trace in ``Common Trace Format (CTF)``. ``CTF`` is an open-source trace format and is compatible with ``LTTng``. For detailed information, refer to `Common Trace Format `_. How to add a tracepoint? ------------------------ This section steps you through the details of adding a simple tracepoint. .. _create_tracepoint_header_file: Create the tracepoint header file ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. code-block:: c #include RTE_TRACE_POINT( app_trace_string, RTE_TRACE_POINT_ARGS(const char *str), rte_trace_point_emit_string(str); ) The above macro creates ``app_trace_string`` tracepoint. The user can choose any name for the tracepoint. However, when adding a tracepoint in the DPDK library, the ``rte__trace_[_]`` naming convention must be followed. The examples are ``rte_eal_trace_generic_str``, ``rte_mempool_trace_create``. The ``RTE_TRACE_POINT`` macro expands from above definition as the following function template: .. code-block:: c static __rte_always_inline void app_trace_string(const char *str) { /* Trace subsystem hooks */ ... rte_trace_point_emit_string(str); } The consumer of this tracepoint can invoke ``app_trace_string(const char *str)`` to emit the trace event to the trace buffer. Register the tracepoint ~~~~~~~~~~~~~~~~~~~~~~~ .. code-block:: c #include #include RTE_TRACE_POINT_REGISTER(app_trace_string, app.trace.string) The above code snippet registers the ``app_trace_string`` tracepoint to trace library. Here, the ``my_tracepoint.h`` is the header file that the user created in the first step :ref:`create_tracepoint_header_file`. The second argument for the ``RTE_TRACE_POINT_REGISTER`` is the name for the tracepoint. This string will be used for tracepoint lookup or regular expression and/or glob based tracepoint operations. There is no requirement for the tracepoint function and its name to be similar. However, it is recommended to have a similar name for a better naming convention. .. note:: The ``rte_trace_point_register.h`` header must be included before any inclusion of the ``rte_trace_point.h`` header. .. note:: The ``RTE_TRACE_POINT_REGISTER`` defines the placeholder for the ``rte_trace_point_t`` tracepoint object. For generic tracepoint or for tracepoint used in public header files, the user must export a ``__`` symbol in the library ``.map`` file for this tracepoint to be used out of the library, in shared builds. For example, ``__app_trace_string`` will be the exported symbol in the above example. Fast path tracepoint -------------------- In order to avoid performance impact in fast path code, the library introduced ``RTE_TRACE_POINT_FP``. When adding the tracepoint in fast path code, the user must use ``RTE_TRACE_POINT_FP`` instead of ``RTE_TRACE_POINT``. ``RTE_TRACE_POINT_FP`` is compiled out by default and it can be enabled using the ``enable_trace_fp`` option for meson build. Event record mode ----------------- Event record mode is an attribute of trace buffers. Trace library exposes the following modes: Overwrite When the trace buffer is full, new trace events overwrites the existing captured events in the trace buffer. Discard When the trace buffer is full, new trace events will be discarded. The mode can be configured either using EAL command line parameter ``--trace-mode`` on application boot up or use ``rte_trace_mode_set()`` API to configure at runtime. Trace file location ------------------- On ``rte_trace_save()`` or ``rte_eal_cleanup()`` invocation, the library saves the trace buffers to the filesystem. By default, the trace files are stored in ``$HOME/dpdk-traces/rte-yyyy-mm-dd-[AP]M-hh-mm-ss/``. It can be overridden by the ``--trace-dir=`` EAL command line option. For more information, refer to :doc:`../linux_gsg/linux_eal_parameters` for trace EAL command line options. View and analyze the recorded events ------------------------------------ Once the trace directory is available, the user can view/inspect the recorded events. There are many tools you can use to read DPDK traces: #. ``babeltrace`` is a command-line utility that converts trace formats; it supports the format that DPDK trace library produces, CTF, as well as a basic text output that can be grep'ed. The babeltrace command is part of the Open Source Babeltrace project. #. ``Trace Compass`` is a graphical user interface for viewing and analyzing any type of logs or traces, including DPDK traces. Use the babeltrace command-line tool ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The simplest way to list all the recorded events of a trace is to pass its path to babeltrace with no options:: babeltrace ``babeltrace`` finds all traces recursively within the given path and prints all their events, merging them in chronological order. You can pipe the output of the babeltrace into a tool like grep(1) for further filtering. Below example grep the events for ``ethdev`` only:: babeltrace /tmp/my-dpdk-trace | grep ethdev You can pipe the output of babeltrace into a tool like wc(1) to count the recorded events. Below example count the number of ``ethdev`` events:: babeltrace /tmp/my-dpdk-trace | grep ethdev | wc --lines Use the tracecompass GUI tool ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ``Tracecompass`` is another tool to view/analyze the DPDK traces which gives a graphical view of events. Like ``babeltrace``, tracecompass also provides an interface to search for a particular event. To use ``tracecompass``, following are the minimum required steps: - Install ``tracecompass`` to the localhost. Variants are available for Linux, Windows, and OS-X. - Launch ``tracecompass`` which will open a graphical window with trace management interfaces. - Open a trace using ``File->Open Trace`` option and select metadata file which is to be viewed/analyzed. For more details, refer `Trace Compass `_. Quick start ----------- This section steps you through the details of generating trace and viewing it. - Start the dpdk-test:: echo "quit" | ./build/app/test/dpdk-test --no-huge --trace=.* - View the traces with babeltrace viewer:: babeltrace $HOME/dpdk-traces/rte-yyyy-mm-dd-[AP]M-hh-mm-ss/ Implementation details ---------------------- As DPDK trace library is designed to generate traces that uses ``Common Trace Format (CTF)``. ``CTF`` specification consists of the following units to create a trace. - ``Stream`` Sequence of packets. - ``Packet`` Header and one or more events. - ``Event`` Header and payload. For detailed information, refer to `Common Trace Format `_. The implementation details broadly divided into the following areas: Trace metadata creation ~~~~~~~~~~~~~~~~~~~~~~~ Based on the ``CTF`` specification, one of a CTF trace's streams is mandatory: the metadata stream. It contains exactly what you would expect: data about the trace itself. The metadata stream contains a textual description of the binary layouts of all the other streams. This description is written using the Trace Stream Description Language (TSDL), a declarative language that exists only in the realm of CTF. The purpose of the metadata stream is to make CTF readers know how to parse a trace's binary streams of events without CTF specifying any fixed layout. The only stream layout known in advance is, in fact, the metadata stream's one. The internal ``trace_metadata_create()`` function generates the metadata. Trace memory ~~~~~~~~~~~~ The trace memory will be allocated through an internal function ``__rte_trace_mem_per_thread_alloc()``. The trace memory will be allocated per thread to enable lock less trace-emit function. For non lcore threads, the trace memory is allocated on the first trace emission. For lcore threads, if trace points are enabled through a EAL option, the trace memory is allocated when the threads are known of DPDK (``rte_eal_init`` for EAL lcores, ``rte_thread_register`` for non-EAL lcores). Otherwise, when trace points are enabled later in the life of the application, the behavior is the same as non lcore threads and the trace memory is allocated on the first trace emission. Trace memory layout ~~~~~~~~~~~~~~~~~~~ .. _table_trace_mem_layout: .. table:: Trace memory layout. +-------------------+ | packet.header | +-------------------+ | packet.context | +-------------------+ | trace 0 header | +-------------------+ | trace 0 payload | +-------------------+ | trace 1 header | +-------------------+ | trace 1 payload | +-------------------+ | trace N header | +-------------------+ | trace N payload | +-------------------+ packet.header ^^^^^^^^^^^^^ .. _table_packet_header: .. table:: Packet header layout. +-------------------+ | uint32_t magic | +-------------------+ | rte_uuid_t uuid | +-------------------+ packet.context ^^^^^^^^^^^^^^ .. _table_packet_context: .. table:: Packet context layout. +----------------------+ | uint32_t thread_id | +----------------------+ | char thread_name[32] | +----------------------+ trace.header ^^^^^^^^^^^^ .. _table_trace_header: .. table:: Trace header layout. +----------------------+ | event_id [63:48] | +----------------------+ | timestamp [47:0] | +----------------------+ The trace header is 64 bits, it consists of 48 bits of timestamp and 16 bits event ID. The ``packet.header`` and ``packet.context`` will be written in the slow path at the time of trace memory creation. The ``trace.header`` and trace payload will be emitted when the tracepoint function is invoked. Limitations ----------- - The ``rte_trace_point_emit_blob()`` function can capture a maximum blob of length ``RTE_TRACE_BLOB_LEN_MAX`` bytes. The application can call ``rte_trace_point_emit_blob()`` multiple times with length less than or equal to ``RTE_TRACE_BLOB_LEN_MAX``, if it needs to capture more than ``RTE_TRACE_BLOB_LEN_MAX`` bytes. - If the length passed to the ``rte_trace_point_emit_blob()`` is less than ``RTE_TRACE_BLOB_LEN_MAX``, then the trailing ``(RTE_TRACE_BLOB_LEN_MAX - len)`` bytes in the trace are set to zero.