61. Vhost Library

The vhost library implements a user space virtio net server allowing the user to manipulate the virtio ring directly. In another words, it allows the user to fetch/put packets from/to the VM virtio net device. To achieve this, a vhost library should be able to:

Access the guest memory:

For QEMU, this is done by using the -object memory-backend-file,share=on,... option. Which means QEMU will create a file to serve as the guest RAM. The share=on option allows another process to map that file, which means it can access the guest RAM.
Know all the necessary information about the vring:

Information such as where the available ring is stored. Vhost defines some messages (passed through a Unix domain socket file) to tell the backend all the information it needs to know how to manipulate the vring.

61.1. Vhost API Overview

The following is an overview of some key Vhost API functions:

rte_vhost_driver_register(path, flags)

This function registers a vhost driver into the system. path specifies the Unix domain socket file path.

Currently supported flags are:
- RTE_VHOST_USER_CLIENT
  
  DPDK vhost-user will act as the client when this flag is given. See below for an explanation.
- RTE_VHOST_USER_NO_RECONNECT
  
  When DPDK vhost-user acts as the client it will keep trying to reconnect to the server (QEMU) until it succeeds. This is useful in two cases:
  - When QEMU is not started yet.
  - When QEMU restarts (for example due to a guest OS reboot).
  This reconnect option is enabled by default. However, it can be turned off by setting this flag.
- RTE_VHOST_USER_IOMMU_SUPPORT
  
  IOMMU support will be enabled when this flag is set. It is disabled by default.
  
  Enabling this flag makes possible to use guest vIOMMU to protect vhost from accessing memory the virtio device isn’t allowed to, when the feature is negotiated and an IOMMU device is declared.
- RTE_VHOST_USER_POSTCOPY_SUPPORT
  
  Postcopy live-migration support will be enabled when this flag is set. It is disabled by default.
  
  Enabling this flag should only be done when the calling application does not pre-fault the guest shared memory, otherwise migration would fail.
- RTE_VHOST_USER_LINEARBUF_SUPPORT
  
  Enabling this flag forces vhost dequeue function to only provide linear pktmbuf (no multi-segmented pktmbuf).
  
  The vhost library by default provides a single pktmbuf for given a packet, but if for some reason the data doesn’t fit into a single pktmbuf (e.g., TSO is enabled), the library will allocate additional pktmbufs from the same mempool and chain them together to create a multi-segmented pktmbuf.
  
  However, the vhost application needs to support multi-segmented format. If the vhost application does not support that format and requires large buffers to be dequeue, this flag should be enabled to force only linear buffers (see RTE_VHOST_USER_EXTBUF_SUPPORT) or drop the packet.
  
  It is disabled by default.
- RTE_VHOST_USER_EXTBUF_SUPPORT
  
  Enabling this flag allows vhost dequeue function to allocate and attach an external buffer to a pktmbuf if the pkmbuf doesn’t provide enough space to store all data.
  
  This is useful when the vhost application wants to support large packets but doesn’t want to increase the default mempool object size nor to support multi-segmented mbufs (non-linear). In this case, a fresh buffer is allocated using rte_malloc() which gets attached to a pktmbuf using rte_pktmbuf_attach_extbuf().
  
  See RTE_VHOST_USER_LINEARBUF_SUPPORT as well to disable multi-segmented mbufs for application that doesn’t support chained mbufs.
  
  It is disabled by default.
- RTE_VHOST_USER_ASYNC_COPY
  
  Asynchronous data path will be enabled when this flag is set. Async data path allows applications to enable DMA acceleration for vhost queues. Vhost leverages the registered DMA channels to free CPU from memory copy operations in data path. A set of async data path APIs are defined for DPDK applications to make use of the async capability. Only packets enqueued/dequeued by async APIs are processed through the async data path.
  
  Currently this feature is only implemented on split ring enqueue data path.
  
  It is disabled by default.
- RTE_VHOST_USER_NET_COMPLIANT_OL_FLAGS
  
  Since v16.04, the vhost library forwards checksum and gso requests for packets received from a virtio driver by filling Tx offload metadata in the mbuf. This behavior is inconsistent with other drivers but it is left untouched for existing applications that might rely on it.
  
  This flag disables the legacy behavior and instead ask vhost to simply populate Rx offload metadata in the mbuf.
  
  It is disabled by default.
- RTE_VHOST_USER_NET_STATS_ENABLE
Per-virtqueue statistics collection will be enabled when this flag is set. When enabled, the application may use rte_vhost_stats_get_names() and rte_vhost_stats_get() to collect statistics, and rte_vhost_stats_reset() to reset them.

It is disabled by default
rte_vhost_driver_set_features(path, features)

This function sets the feature bits the vhost-user driver supports. The vhost-user driver could be vhost-user net, yet it could be something else, say, vhost-user SCSI.
rte_vhost_driver_callback_register(path, vhost_device_ops)

This function registers a set of callbacks, to let DPDK applications take the appropriate action when some events happen. The following events are currently supported:
- new_device(int vid)
  
  This callback is invoked when a virtio device becomes ready. vid is the vhost device ID.
- destroy_device(int vid)
  
  This callback is invoked when a virtio device is paused or shut down.
- vring_state_changed(int vid, uint16_t queue_id, int enable)
  
  This callback is invoked when a specific queue’s state is changed, for example to enabled or disabled.
- features_changed(int vid, uint64_t features)
  
  This callback is invoked when the features is changed. For example, VHOST_F_LOG_ALL will be set/cleared at the start/end of live migration, respectively.
- new_connection(int vid)
  
  This callback is invoked on new vhost-user socket connection. If DPDK acts as the server the device should not be deleted before destroy_connection callback is received.
- destroy_connection(int vid)
  
  This callback is invoked when vhost-user socket connection is closed. It indicates that device with id vid is no longer in use and can be safely deleted.
rte_vhost_driver_disable/enable_features(path, features))

This function disables/enables some features. For example, it can be used to disable mergeable buffers and TSO features, which both are enabled by default.
rte_vhost_driver_start(path)

This function triggers the vhost-user negotiation. It should be invoked at the end of initializing a vhost-user driver.
rte_vhost_enqueue_burst(vid, queue_id, pkts, count)

Transmits (enqueues) count packets from host to guest.
rte_vhost_dequeue_burst(vid, queue_id, mbuf_pool, pkts, count)

Receives (dequeues) count packets from guest, and stored them at pkts.
rte_vhost_crypto_create(vid, cryptodev_id, sess_mempool, socket_id)

As an extension of new_device(), this function adds virtio-crypto workload acceleration capability to the device. All crypto workload is processed by DPDK cryptodev with the device ID of cryptodev_id.
rte_vhost_crypto_free(vid)

Frees the memory and vhost-user message handlers created in rte_vhost_crypto_create().
rte_vhost_crypto_fetch_requests(vid, queue_id, ops, nb_ops)

Receives (dequeues) nb_ops virtio-crypto requests from guest, parses them to DPDK Crypto Operations, and fills the ops with parsing results.
rte_vhost_crypto_finalize_requests(queue_id, ops, nb_ops)

After the ops are dequeued from Cryptodev, finalizes the jobs and notifies the guest(s).
rte_vhost_crypto_set_zero_copy(vid, option)

Enable or disable zero copy feature of the vhost crypto backend.
rte_vhost_async_dma_configure(dma_id, vchan_id)

Tell vhost which DMA vChannel is going to use. This function needs to be called before register async data-path for vring.
rte_vhost_async_channel_register(vid, queue_id)

Register async DMA acceleration for a vhost queue after vring is enabled.
rte_vhost_async_channel_register_thread_unsafe(vid, queue_id)

Register async DMA acceleration for a vhost queue without performing any locking.

This function is only safe to call in vhost callback functions (i.e., struct rte_vhost_device_ops).
rte_vhost_async_channel_unregister(vid, queue_id)

Unregister the async DMA acceleration from a vhost queue. Unregistration will fail, if the vhost queue has in-flight packets that are not completed.

Unregister async DMA acceleration in vring_state_changed() may fail, as this API tries to acquire the spinlock of vhost queue. The recommended way is to unregister async copy devices for all vhost queues in destroy_device(), when a virtio device is paused or shut down.
rte_vhost_async_channel_unregister_thread_unsafe(vid, queue_id)

Unregister async DMA acceleration for a vhost queue without performing any locking.

This function is only safe to call in vhost callback functions (i.e., struct rte_vhost_device_ops).
rte_vhost_submit_enqueue_burst(vid, queue_id, pkts, count, dma_id, vchan_id)

Submit an enqueue request to transmit count packets from host to guest by async data path. Applications must not free the packets submitted for enqueue until the packets are completed.
rte_vhost_poll_enqueue_completed(vid, queue_id, pkts, count, dma_id, vchan_id)

Poll enqueue completion status from async data path. Completed packets are returned to applications through pkts.
rte_vhost_async_get_inflight(vid, queue_id)

This function returns the amount of in-flight packets for the vhost queue using async acceleration.

rte_vhost_async_get_inflight_thread_unsafe(vid, queue_id)

Get the number of inflight packets for a vhost queue without performing any locking. It should only be used within the vhost ops, which already holds the lock.

rte_vhost_clear_queue_thread_unsafe(vid, queue_id, **pkts, count, dma_id, vchan_id)

Clear in-flight packets which are submitted to async channel in vhost async data path without performing locking on virtqueue. Completed packets are returned to applications through pkts.
rte_vhost_clear_queue(vid, queue_id, **pkts, count, dma_id, vchan_id)

Clear in-flight packets which are submitted to async channel in vhost async data path. Completed packets are returned to applications through pkts.
rte_vhost_vring_call_nonblock(int vid, uint16_t vring_idx)

Notify the guest that used descriptors have been added to the vring. This function will return -EAGAIN when vq’s access lock is held by other thread, user should try again later.
rte_vhost_vring_stats_get_names(int vid, uint16_t queue_id, struct rte_vhost_stat_name *names, unsigned int size)

This function returns the names of the queue statistics. It requires statistics collection to be enabled at registration time.
rte_vhost_vring_stats_get(int vid, uint16_t queue_id, struct rte_vhost_stat *stats, unsigned int n)

This function returns the queue statistics. It requires statistics collection to be enabled at registration time.
rte_vhost_vring_stats_reset(int vid, uint16_t queue_id)

This function resets the queue statistics. It requires statistics collection to be enabled at registration time.
rte_vhost_async_try_dequeue_burst(vid, queue_id, mbuf_pool, pkts, count, nr_inflight, dma_id, vchan_id)

Receive count packets from guest to host in async data path, and store them at pkts.
rte_vhost_driver_get_vdpa_dev_type(path, type)

Get device type of vDPA device, such as VDPA_DEVICE_TYPE_NET, VDPA_DEVICE_TYPE_BLK.
rte_vhost_async_dma_unconfigure(dma_id, vchan_id)

Clean DMA vChannel finished to use. After this function is called, the specified DMA vChannel should no longer be used by the Vhost library.
rte_vhost_notify_guest(int vid, uint16_t queue_id)

Inject the offloaded interrupt received by the ‘guest_notify’ callback, into the vhost device’s queue.
rte_vhost_driver_set_max_queue_num(const char *path, uint32_t max_queue_pairs)

Set the maximum number of queue pairs supported by the device.

61.2. Vhost-user Implementations

Vhost-user uses Unix domain sockets for passing messages. This means the DPDK vhost-user implementation has two options:

DPDK vhost-user acts as the server.

DPDK will create a Unix domain socket server file and listen for connections from the frontend.

Note, this is the default mode, and the only mode before DPDK v16.07.
DPDK vhost-user acts as the client.

Unlike the server mode, this mode doesn’t create the socket file; it just tries to connect to the server (which responses to create the file instead).

When the DPDK vhost-user application restarts, DPDK vhost-user will try to connect to the server again. This is how the “reconnect” feature works.
Note
- The “reconnect” feature requires QEMU v2.7 (or above).
- The vhost supported features must be exactly the same before and after the restart. For example, if TSO is disabled and then enabled, nothing will work and undefined issues might happen.

No matter which mode is used, once a connection is established, DPDK vhost-user will start receiving and processing vhost messages from QEMU.

For messages with a file descriptor, the file descriptor can be used directly in the vhost process as it is already installed by the Unix domain socket.

The supported vhost messages are:

VHOST_SET_MEM_TABLE
VHOST_SET_VRING_KICK
VHOST_SET_VRING_CALL
VHOST_SET_LOG_FD
VHOST_SET_VRING_ERR

For VHOST_SET_MEM_TABLE message, QEMU will send information for each memory region and its file descriptor in the ancillary data of the message. The file descriptor is used to map that region.

VHOST_SET_VRING_KICK is used as the signal to put the vhost device into the data plane, and VHOST_GET_VRING_BASE is used as the signal to remove the vhost device from the data plane.

When the socket connection is closed, vhost will destroy the device.

61.3. Guest memory requirement

Memory pre-allocation

For non-async data path guest memory pre-allocation is not a must but can help save memory. To do this we can add option -mem-prealloc when starting QEMU, or we can lock all memory at vhost side which will force memory to be allocated when it calls mmap (option –mlockall in ovs-dpdk is an example in hand).

For async data path, we force the VM memory to be pre-allocated at vhost lib when mapping the guest memory; and also we need to lock the memory to prevent pages being swapped out to disk.
Memory sharing

Make sure share=on QEMU option is given. The vhost-user will not work with a QEMU instance without shared memory mapping.

61.4. Vhost supported vSwitch reference

For more vhost details and how to support vhost in vSwitch, please refer to the vhost example in the DPDK Sample Applications Guide.

61.5. Vhost data path acceleration (vDPA)

vDPA supports selective datapath in vhost-user lib by enabling virtio ring compatible devices to serve virtio driver directly for datapath acceleration.

rte_vhost_driver_attach_vdpa_device is used to configure the vhost device with accelerated backend.

Also vhost device capabilities are made configurable to adopt various devices. Such capabilities include supported features, protocol features, queue number.

Finally, a set of device ops is defined for device specific operations:

get_queue_num

Called to get supported queue number of the device.
get_features

Called to get supported features of the device.
get_protocol_features

Called to get supported protocol features of the device.
dev_conf

Called to configure the actual device when the virtio device becomes ready.
dev_close

Called to close the actual device when the virtio device is stopped.
set_vring_state

Called to change the state of the vring in the actual device when vring state changes.
set_features

Called to set the negotiated features to device.
migration_done

Called to allow the device to response to RARP sending.
get_vfio_group_fd

Called to get the VFIO group fd of the device.
get_vfio_device_fd

Called to get the VFIO device fd of the device.
get_notify_area

Called to get the notify area info of the queue.

61.6. Vhost asynchronous data path

Vhost asynchronous data path leverages DMA devices to offload memory copies from the CPU and it is implemented in an asynchronous way. It enables applications, like OVS, to save CPU cycles and hide memory copy overhead, thus achieving higher throughput.

Vhost doesn’t manage DMA devices and applications, like OVS, need to manage and configure DMA devices. Applications need to tell vhost what DMA devices to use in every data path function call. This design enables the flexibility for applications to dynamically use DMA channels in different function modules, not limited in vhost.

In addition, vhost supports M:N mapping between vrings and DMA virtual channels. Specifically, one vring can use multiple different DMA channels and one DMA channel can be shared by multiple vrings at the same time. The reason of enabling one vring to use multiple DMA channels is that it’s possible that more than one dataplane threads enqueue packets to the same vring with their own DMA virtual channels. Besides, the number of DMA devices is limited. For the purpose of scaling, it’s necessary to support sharing DMA channels among vrings.

Async enqueue API usage

In async enqueue path, rte_vhost_poll_enqueue_completed() needs to be called in time to notify the guest of DMA copy completed packets. Moreover, calling rte_vhost_submit_enqueue_burst() all the time but not poll completed will cause the DMA ring to be full, which will result in packet loss eventually.
Recommended IOVA mode in async datapath

When DMA devices are bound to VFIO driver, VA mode is recommended. For PA mode, page by page mapping may exceed IOMMU’s max capability, better to use 1G guest hugepage.

For UIO driver or kernel driver, any VFIO related error messages can be ignored.