9. DPDK Release 19.11
9.1. New Features
Added support for –base-virtaddr EAL option to FreeBSD.
The FreeBSD version of DPDK now also supports setting base virtual address for mapping pages and resources into its address space.
Added Lock-free Stack for aarch64.
Enabled the lock-free stack implementation for aarch64 platforms.
Extended pktmbuf mempool private structure.
rte_pktmbuf_pool_private structure was extended to include flags field for future compatibility. As per 19.11 release this field is reserved and should be set to 0 by the user.
+* Changed mempool allocation behavior.
Changed the mempool allocation behaviour so that objects no longer cross pages by default. Note, this may consume more memory when using small memory pages.
Added support for dynamic fields and flags in mbuf.
This new feature adds the ability to dynamically register some room for a field or a flag in the mbuf structure. This is typically used for specific offload features, where adding a static field or flag in the mbuf is not justified.
Added support for hairpin queues.
On supported NICs, we can now setup hairpin queues which will offload packets from the wire, back to the wire.
Added flow tag in rte_flow.
The
SET_TAG
action andTAG
item have been added to support transient flow tag.Extended metadata support in rte_flow.
Flow metadata has been extended to both Rx and Tx.
Tx metadata can also be set by SET_META action of rte_flow.
Rx metadata is delivered to the host via a dynamic field of
rte_mbuf
withPKT_RX_DYNF_METADATA
.
Added ethdev API to set supported packet types.
Added new API
rte_eth_dev_set_ptypes
which allows an application to inform a PMD about a reduced range of packet types to handle.This scheme will allow PMDs to avoid lookup of internal ptype table on Rx and thereby improve Rx performance if the application wishes to do so.
Added Rx offload flag to enable or disable RSS update.
Added new Rx offload flag
DEV_RX_OFFLOAD_RSS_HASH
which can be used to enable/disable PMDs write torte_mbuf::hash::rss
.PMDs notify the validity of
rte_mbuf::hash:rss
to the application by enablingPKT_RX_RSS_HASH
flag inrte_mbuf::ol_flags
.
Added Rx/Tx packet burst mode “get” API.
Added two new functions
rte_eth_rx_burst_mode_get
andrte_eth_tx_burst_mode_get
that allow an application to retrieve the mode information about Rx/Tx packet burst such as Scalar or Vector, and Vector technology like AVX2.Added Hisilicon hns3 PMD.
Added the new
hns3
net driver for the inbuilt Hisilicon Network Subsystem 3 (HNS3) network engine found in the Hisilicon Kunpeng 920 SoC. See the HNS3 Poll Mode Driver guide for more details on this new driver.Added NXP PFE PMD.
Added the new PFE driver for the NXP LS1012A platform. See the PFE Poll Mode Driver NIC driver guide for more details on this new driver.
Updated Broadcom bnxt driver.
Updated Broadcom bnxt driver with new features and improvements, including:
Added support for hot firmware upgrade.
Added support for error recovery.
Added support for querying and using COS classification in hardware.
Added LRO support Thor devices.
Update HWRM API to version 1.10.1.6
Updated the enic driver.
Added support for Geneve with options offload.
Added flow API implementation based on VIC Flow Manager API.
Updated iavf PMD.
Enable AVX2 data path for iavf PMD.
Updated the Intel e1000 driver.
Added support for the
RTE_ETH_DEV_CLOSE_REMOVE
flag.Updated the Intel ixgbe driver.
Added support for the
RTE_ETH_DEV_CLOSE_REMOVE
flag.Updated the Intel i40e driver.
Added support for the
RTE_ETH_DEV_CLOSE_REMOVE
flag.Updated the Intel fm10k driver.
Added support for the
RTE_ETH_DEV_CLOSE_REMOVE
flag.Updated the Intel ice driver.
Updated the Intel ice driver with new features and improvements, including:
Added support for device-specific DDP package loading.
Added support for handling Receive Flex Descriptor.
Added support for protocol extraction on per Rx queue.
Added support for Flow Director filter based on generic filter framework.
Added support for the
RTE_ETH_DEV_CLOSE_REMOVE
flag.Generic filter enhancement - Supported pipeline mode. - Supported new packet type like PPPoE for switch filter.
Supported input set change and symmetric hash by rte_flow RSS action.
Added support for GTP Tx checksum offload.
Added new device IDs to support E810_XXV devices.
Updated the Huawei hinic driver.
Updated the Huawei hinic driver with new features and improvements, including:
Enabled SR-IOV - Partially supported at this point, VFIO only.
Supported VLAN filter and VLAN offload.
Supported Unicast MAC filter and Multicast MAC filter.
Supported Flow API for LACP, VRRP, BGP and so on.
Supported FW version get.
Updated Mellanox mlx5 driver.
Updated Mellanox mlx5 driver with new features and improvements, including:
Added support for VLAN pop flow offload command.
Added support for VLAN push flow offload command.
Added support for VLAN set PCP offload command.
Added support for VLAN set VID offload command.
Added support for matching on packets withe Geneve tunnel header.
Added hairpin support.
Added ConnectX-6 Dx support.
Flow engine selected based on RDMA Core library version. DV flow engine selected if version is rdma-core-24.0 or higher. Verbs flow engine selected otherwise.
Updated the AF_XDP PMD.
Updated the AF_XDP PMD. The new features include:
Enabled zero copy between application mempools and UMEM by enabling the
XDP_UMEM_UNALIGNED_CHUNKS UMEM
flag.
Added cryptodev asymmetric session-less operation.
Added a session-less option to the cryptodev asymmetric structure. It works the same way as symmetric crypto, and the corresponding transform is used directly by the crypto operation.
Added Marvell NITROX symmetric crypto PMD.
Added a symmetric crypto PMD for Marvell NITROX V security processor. See the Marvell NITROX Crypto Poll Mode Driver guide for more details on this new PMD.
Added asymmetric support to Marvell OCTEON TX crypto PMD.
Added support for asymmetric operations to Marvell OCTEON TX crypto PMD. Supports RSA and modexp operations.
Added Marvell OCTEON TX2 crypto PMD.
Added a new PMD for hardware crypto offload block on
OCTEON TX2
SoC.See Marvell OCTEON TX2 Crypto Poll Mode Driver for more details
Updated NXP crypto PMDs for PDCP support.
Added PDCP support to the DPAA_SEC and DPAA2_SEC PMDs using rte_security APIs. Support has been added for all sequence number sizes for control and user plane. Test and test-crypto-perf applications have been updated for unit testing.
Updated the AESNI-MB PMD.
Added support for intel-ipsec-mb version 0.53.
Updated the AESNI-GCM PMD.
Added support for intel-ipsec-mb version 0.53.
Added support for in-place chained mbufs with AES-GCM algorithm.
Enabled Single Pass GCM acceleration on QAT GEN3.
Added support for Single Pass GCM, available on QAT GEN3 only (Intel QuickAssist Technology P5xxx). It is automatically chosen instead of the classic 2-pass mode when running on QAT GEN3, significantly improving the performance of AES GCM operations.
Updated the Intel QuickAssist Technology (QAT) asymmetric crypto PMD.
Added support for asymmetric session-less operations.
Added support for RSA algorithm with pair
(n, d)
private key representation.Added support for RSA algorithm with quintuple private key representation.
Updated the Intel QuickAssist Technology (QAT) compression PMD.
Added stateful decompression support in the Intel QuickAssist Technology PMD. Please note that stateful compression is not supported.
Added external buffers support for dpdk-test-compress-perf tool.
Added a command line option to the
dpdk-test-compress-perf
tool to allocate and use memory zones as external buffers instead of keeping the data directly in mbuf areas.Updated the IPSec library.
Added Security Associations (SA) Database API to
librte_ipsec
. A new test-sad application has also been introduced to evaluate and perform custom functional and performance tests for an IPsec SAD implementation.Support fragmented packets in inline crypto processing mode with fallback
lookaside-none
session. Corresponding changes are also added in the IPsec Security Gateway application.
Introduced FIFO for NTB PMD.
Introduced FIFO for NTB (Non-transparent Bridge) PMD to support packet based processing.
Added eBPF JIT support for arm64.
Added eBPF JIT support for arm64 architecture to improve the eBPF program performance.
Added RIB and FIB (Routing/Forwarding Information Base) libraries.
Added Routing and Forwarding Information Base (RIB/FIB) libraries. RIB and FIB can replace the LPM (Longest Prefix Match) library with better control plane (RIB) performance. The data plane (FIB) can be extended with new algorithms.
Updated testpmd with a command for ptypes.
Added a console command to testpmd app,
show port (port_id) ptypes
which gives ability to print port supported ptypes in different protocol layers.Packet type detection disabled by default for the supported PMDs.
Added new l2fwd-event sample application.
Added an example application
l2fwd-event
that adds event device support to the traditional l2fwd example. It demonstrates usage of poll and event mode IO mechanism under a single application.Added build support for Link Time Optimization.
LTO is an optimization technique used by the compiler to perform whole program analysis and optimization at link time. In order to do that compilers store their internal representation of the source code that the linker uses at the final stage of the compilation process.
See Link Time Optimization for more information:
Added IOVA as VA support for KNI.
Added IOVA = VA support for KNI. KNI can operate in IOVA = VA mode when
iova-mode=va
EAL option is passed to the application or when bus IOVA scheme is selected as RTE_IOVA_VA. This mode only works on Linux Kernel versions 4.10.0 and above.Due to IOVA to KVA address translations, based on the KNI use case there can be a performance impact. For mitigation, forcing IOVA to PA via EAL
--iova-mode=pa
option can be used, IOVA_DC bus iommu scheme can also result in IOVA as PA.
9.2. Removed Items
Removed library-level ABI versions. These have been replaced with a single project-level ABI version for non-experimental libraries and an ABI version of
0
for experimental libraries. Review the ABI Policy and ABI Versioning guides for more information.Removed duplicated set of commands for Rx offload configuration from testpmd:
port config all crc-strip|scatter|rx-cksum|rx-timestamp| hw-vlan|hw-vlan-filter|hw-vlan-strip|hw-vlan-extend on|off
The testpmd command set that can be used instead in order to enable or disable Rx offloading on all Rx queues of a port is:
port config <port_id> rx_offload crc_strip|scatter| ipv4_cksum|udp_cksum|tcp_cksum|timestamp| vlan_strip|vlan_filter|vlan_extend on|off
Removed AF_XDP pmd_zero copy vdev argument. Support is now auto-detected.
The following sample applications have been removed in this release:
Exception Path
L3 Forwarding in a Virtualization Environment
Load Balancer
Netmap Compatibility
Quota and Watermark
vhost-scsi
Removed arm64-dpaa2-* build config. arm64-dpaa-* can now build for both dpaa and dpaa2 platforms.
9.3. API Changes
eal: made the
lcore_config
struct and global symbol private.eal: removed the
rte_cpu_check_supported
function, replaced byrte_cpu_is_supported
since dpdk v17.08.eal: removed the
rte_malloc_virt2phy
function, replaced byrte_malloc_virt2iova
since v17.11.eal: made the
rte_config
struct andrte_eal_get_configuration
function private.mem: hid the internal
malloc_heap
structure and therte_malloc_heap.h
header.vfio: removed
rte_vfio_dma_map
andrte_vfio_dma_unmap
that have been marked as deprecated in release 19.05.rte_vfio_container_dma_map
andrte_vfio_container_dma_unmap
can be used as substitutes.pci: removed the following functions deprecated since dpdk v17.11:
eal_parse_pci_BDF
replaced byrte_pci_addr_parse
eal_parse_pci_DomBDF
replaced byrte_pci_addr_parse
rte_eal_compare_pci_addr
replaced byrte_pci_addr_cmp
The network structure
esp_tail
has been prefixed byrte_
.The network definitions of PPPoE ethertypes have been prefixed by
RTE_
.The network structure for MPLS has been prefixed by
rte_
.ethdev: changed
rte_eth_dev_infos_get
return value fromvoid
toint
to provide a way to report various error conditions.ethdev: changed
rte_eth_promiscuous_enable
andrte_eth_promiscuous_disable
return value fromvoid
toint
to provide a way to report various error conditions.ethdev: changed
rte_eth_allmulticast_enable
andrte_eth_allmulticast_disable
return value fromvoid
toint
to provide a way to report various error conditions.ethdev: changed
rte_eth_dev_xstats_reset
return value fromvoid
toint
to provide a way to report various error conditions.ethdev: changed
rte_eth_link_get
andrte_eth_link_get_nowait
return value fromvoid
toint
to provide a way to report various error conditions.ethdev: changed
rte_eth_macaddr_get
return value fromvoid
toint
to provide a way to report various error conditions.ethdev: changed
rte_eth_dev_owner_delete
return value fromvoid
toint
to provide a way to report various error conditions.ethdev: The deprecated function
rte_eth_dev_count
was removed. The functionrte_eth_dev_count_avail
is a drop-in replacement. If the intent is to iterate over ports,RTE_ETH_FOREACH_*
macros are better port iterators.ethdev:
RTE_FLOW_ITEM_TYPE_META
data endianness altered to host one. Due to the new dynamic metadata field in mbuf is host-endian either, there is a minor compatibility issue for applications in case of 32-bit values supported.ethdev: the tx_metadata mbuf field is moved to dynamic one.
PKT_TX_METADATA
flag is replaced withPKT_TX_DYNF_METADATA
.DEV_TX_OFFLOAD_MATCH_METADATA
offload flag is removed, now metadata support in PMD is engaged on dynamic field registration.event: The function
rte_event_eth_tx_adapter_enqueue
takes an additional input asflags
. FlagRTE_EVENT_ETH_TX_ADAPTER_ENQUEUE_SAME_DEST
which has been introduced in this release is used when all the packets enqueued in the Tx adapter are destined for the same Ethernet port and Tx queue.sched: The pipe nodes configuration parameters such as number of pipes, pipe queue sizes, pipe profiles, etc., are moved from port level structure to subport level. This allows different subports of the same port to have different configuration for the pipe nodes.
9.4. ABI Changes
policy: Please note the revisions to the ABI Policy introducing major ABI versions, with DPDK 19.11 becoming the first major version
v20
. ABI changes to add new features continue to be permitted in subsequent releases, with the condition that ABI compatibility with the major ABI version is maintained.net: The Ethernet address and other header definitions have changed attributes. They have been modified to be aligned on 2-byte boundaries. These changes should not impact normal usage because drivers naturally align the Ethernet header on receive and all known encapsulations preserve the alignment of the header.
security: The field
replay_win_sz
has been moved from the ipsec library basedrte_ipsec_sa_prm
structure to security library based structurerte_security_ipsec_xform
, which specify the anti-replay window size to enable sequence replay attack handling.ipsec: The field
replay_win_sz
has been removed from the structurerte_ipsec_sa_prm
as it has been added to the security library.ethdev: Added 32-bit fields for maximum LRO aggregated packet size, in struct
rte_eth_dev_info
for the port capability and in structrte_eth_rxmode
for the port configuration. Application should use the new field in structrte_eth_rxmode
to configure the requested size. PMD should use the new field in structrte_eth_dev_info
to report the supported port capability.
9.6. Tested Platforms
Intel® platforms with Intel® NICs combinations
CPU
Intel® Atom™ CPU C3758 @ 2.20GHz
Intel® Atom™ CPU C3858 @ 2.00GHz
Intel® Atom™ CPU C3958 @ 2.00GHz
Intel® Xeon® CPU D-1541 @ 2.10GHz
Intel® Xeon® CPU D-1553N @ 2.30GHz
Intel® Xeon® CPU E5-2680 0 @ 2.70GHz
Intel® Xeon® CPU E5-2680 v2 @ 2.80GHz
Intel® Xeon® CPU E5-2699 v3 @ 2.30GHz
Intel® Xeon® CPU E5-2699 v4 @ 2.20GHz
Intel® Xeon® Gold 6139 CPU @ 2.30GHz
Intel® Xeon® Gold 6252N CPU @ 2.30GHz
Intel® Xeon® Platinum 8180 CPU @ 2.50GHz
Intel® Xeon® Platinum 8280M CPU @ 2.70GHz
OS:
CentOS 7.6
Fedora 30
FreeBSD 12.0
Red Hat Enterprise Linux Server release 8.0
Red Hat Enterprise Linux Server release 7.6
Suse12SP3
Ubuntu 14.04
Ubuntu 16.04
Ubuntu 16.10
Ubuntu 18.04
Ubuntu 19.04
NICs:
Intel® Corporation Ethernet Controller E810-C for SFP (2x25G)
Firmware version: 1.02 0x80002084 1.2538.0/1.02 0x80002082 1.2538.0
Device id (pf): 8086:1593
Driver version: 0.12.25 (ice)
Intel® Corporation Ethernet Controller E810-C for SFP (2x100G)
Firmware version: 1.02 0x80002081 1.2538.0
Device id (pf): 8086:1592
Driver version: 0.12.25 (ice)
Intel® 82599ES 10 Gigabit Ethernet Controller
Firmware version: 0x61bf0001
Device id (pf/vf): 8086:10fb / 8086:10ed
Driver version: 5.6.1 (ixgbe)
Intel® Corporation Ethernet Connection X552/X557-AT 10GBASE-T
Firmware version: 0x800003e7
Device id (pf/vf): 8086:15ad / 8086:15a8
Driver version: 5.1.0 (ixgbe)
Intel® Corporation Ethernet Controller 10G X550T
Firmware version: 0x80000482
Device id (pf): 8086:1563
Driver version: 5.6.1 (ixgbe)
Intel® Ethernet Converged Network Adapter X710-DA4 (4x10G)
Firmware version: 7.00 0x80004cdb
Device id (pf/vf): 8086:1572 / 8086:154c
Driver version: 2.9.21 (i40e)
Intel® Corporation Ethernet Connection X722 for 10GbE SFP+ (4x10G)
Firmware version: 4.10 0x80001a3c
Device id (pf/vf): 8086:37d0 / 8086:37cd
Driver version: 2.9.21 (i40e)
Intel® Ethernet Converged Network Adapter XXV710-DA2 (2x25G)
Firmware version: 7.00 0x80004cf8
Device id (pf/vf): 8086:158b / 8086:154c
Driver version: 2.9.21 (i40e)
Intel® Ethernet Converged Network Adapter XL710-QDA2 (2X40G)
Firmware version: 7.00 0x80004c97
Device id (pf/vf): 8086:1583 / 8086:154c
Driver version: 2.9.21 (i40e)
Intel® Corporation I350 Gigabit Network Connection
Firmware version: 1.63, 0x80000cbc
Device id (pf/vf): 8086:1521 / 8086:1520
Driver version: 5.4.0-k (igb)
Intel® Corporation I210 Gigabit Network Connection
Firmware version: 3.25, 0x800006eb
Device id (pf): 8086:1533
Driver version: 5.4.0-k(igb)
ARMv8 SoC combinations from Marvell (with integrated NICs)
SoC:
CN83xx, CN96xx, CN93xx
OS (Based on Marvell OCTEON TX SDK-10.1.2.0):
Arch Linux
Buildroot 2018.11
Ubuntu 16.04.1 LTS
Ubuntu 16.10
Ubuntu 18.04.1
Ubuntu 19.04
Intel® platforms with Mellanox® NICs combinations
CPU:
Intel® Xeon® Gold 6154 CPU @ 3.00GHz
Intel® Xeon® CPU E5-2697A v4 @ 2.60GHz
Intel® Xeon® CPU E5-2697 v3 @ 2.60GHz
Intel® Xeon® CPU E5-2680 v2 @ 2.80GHz
Intel® Xeon® CPU E5-2650 v4 @ 2.20GHz
Intel® Xeon® CPU E5-2640 @ 2.50GHz
Intel® Xeon® CPU E5-2620 v4 @ 2.10GHz
OS:
Red Hat Enterprise Linux Server release 8.0 (Maipo)
Red Hat Enterprise Linux Server release 7.7 (Maipo)
Red Hat Enterprise Linux Server release 7.6 (Maipo)
Red Hat Enterprise Linux Server release 7.5 (Maipo)
Red Hat Enterprise Linux Server release 7.4 (Maipo)
Red Hat Enterprise Linux Server release 7.3 (Maipo)
Red Hat Enterprise Linux Server release 7.2 (Maipo)
Ubuntu 19.04
Ubuntu 18.10
Ubuntu 18.04
Ubuntu 16.04
SUSE Linux Enterprise Server 15
OFED:
MLNX_OFED 4.6-1.0.1.1
MLNX_OFED 4.7-1.0.0.1
MLNX_OFED 4.7-3.1.9.0 and above
upstream kernel:
Linux 5.3 and above
rdma-core:
rdma-core-24.1-1 and above
NICs:
Mellanox® ConnectX®-3 Pro 40G MCX354A-FCC_Ax (2x40G)
Host interface: PCI Express 3.0 x8
Device ID: 15b3:1007
Firmware version: 2.42.5000
Mellanox® ConnectX®-4 10G MCX4111A-XCAT (1x10G)
Host interface: PCI Express 3.0 x8
Device ID: 15b3:1013
Firmware version: 12.26.2032 and above
Mellanox® ConnectX®-4 10G MCX4121A-XCAT (2x10G)
Host interface: PCI Express 3.0 x8
Device ID: 15b3:1013
Firmware version: 12.26.2032 and above
Mellanox® ConnectX®-4 25G MCX4111A-ACAT (1x25G)
Host interface: PCI Express 3.0 x8
Device ID: 15b3:1013
Firmware version: 12.26.2032 and above
Mellanox® ConnectX®-4 25G MCX4121A-ACAT (2x25G)
Host interface: PCI Express 3.0 x8
Device ID: 15b3:1013
Firmware version: 12.26.2032 and above
Mellanox® ConnectX®-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G)
Host interface: PCI Express 3.0 x8
Device ID: 15b3:1013
Firmware version: 12.26.2032 and above
Mellanox® ConnectX®-4 40G MCX415A-BCAT (1x40G)
Host interface: PCI Express 3.0 x16
Device ID: 15b3:1013
Firmware version: 12.26.2032 and above
Mellanox® ConnectX®-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G)
Host interface: PCI Express 3.0 x8
Device ID: 15b3:1013
Firmware version: 12.26.2032 and above
Mellanox® ConnectX®-4 50G MCX414A-BCAT (2x50G)
Host interface: PCI Express 3.0 x8
Device ID: 15b3:1013
Firmware version: 12.26.2032 and above
Mellanox® ConnectX®-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G)
Host interface: PCI Express 3.0 x16
Device ID: 15b3:1013
Firmware version: 12.26.2032 and above
Firmware version: 12.26.2032 and above
Mellanox® ConnectX®-4 50G MCX415A-CCAT (1x100G)
Host interface: PCI Express 3.0 x16
Device ID: 15b3:1013
Firmware version: 12.26.2032 and above
Mellanox® ConnectX®-4 100G MCX416A-CCAT (2x100G)
Host interface: PCI Express 3.0 x16
Device ID: 15b3:1013
Firmware version: 12.26.2032 and above
Mellanox® ConnectX®-4 Lx 10G MCX4121A-XCAT (2x10G)
Host interface: PCI Express 3.0 x8
Device ID: 15b3:1015
Firmware version: 14.26.2032 and above
Mellanox® ConnectX®-4 Lx 25G MCX4121A-ACAT (2x25G)
Host interface: PCI Express 3.0 x8
Device ID: 15b3:1015
Firmware version: 14.26.2032 and above
Mellanox® ConnectX®-5 100G MCX556A-ECAT (2x100G)
Host interface: PCI Express 3.0 x16
Device ID: 15b3:1017
Firmware version: 16.26.2032 and above
Mellanox® ConnectX®-5 Ex EN 100G MCX516A-CDAT (2x100G)
Host interface: PCI Express 4.0 x16
Device ID: 15b3:1019
Firmware version: 16.26.2032 and above
IBM Power 9 platforms with Mellanox® NICs combinations
CPU:
POWER9 2.2 (pvr 004e 1202) 2300MHz
OS:
Ubuntu 18.04.1 LTS (Bionic Beaver)
NICs:
Mellanox® ConnectX®-5 100G MCX556A-ECAT (2x100G)
Host interface: PCI Express 3.0 x16
Device ID: 15b3:1017
Firmware version: 16.26.1040
OFED:
MLNX_OFED 4.7-1.0.0.2