53. TXGBE Poll Mode Driver

The TXGBE PMD (librte_pmd_txgbe) provides poll mode driver support for Wangxun 10 Gigabit Ethernet NICs.

53.1. Features

  • Multiple queues for TX and RX

  • Receiver Side Scaling (RSS)

  • MAC/VLAN filtering

  • Packet type information

  • Checksum offload

  • VLAN/QinQ stripping and inserting

  • TSO offload

  • Promiscuous mode

  • Multicast mode

  • Port hardware statistics

  • Jumbo frames

  • Link state information

  • Link flow control

  • Interrupt mode for RX

  • Scattered and gather for TX and RX

  • DCB

  • IEEE 1588

  • FW version

  • LRO

  • Generic flow API

53.2. Prerequisites

53.3. Pre-Installation Configuration

53.3.1. Build Options

The following build-time options may be enabled on build time using.

-Dc_args= meson argument (e.g. -Dc_args=-DRTE_LIBRTE_TXGBE_DEBUG_RX).

Please note that enabling debugging options may affect system performance.

  • RTE_LIBRTE_TXGBE_DEBUG_RX (undefined by default)

    Toggle display of receive fast path run-time messages.

  • RTE_LIBRTE_TXGBE_DEBUG_TX (undefined by default)

    Toggle display of transmit fast path run-time messages.

  • RTE_LIBRTE_TXGBE_DEBUG_TX_FREE (undefined by default)

    Toggle display of transmit descriptor clean messages.

  • RTE_LIBRTE_TXGBE_PF_DISABLE_STRIP_CRC (undefined by default)

    Decide to enable or disable HW CRC in VF PMD.

53.3.2. Dynamic Logging Parameters

One may leverage EAL option “–log-level” to change default levels for the log types supported by the driver. The option is used with an argument typically consisting of two parts separated by a colon.

TXGBE PMD provides the following log types available for control:

  • pmd.net.txgbe.driver (default level is notice)

    Affects driver-wide messages unrelated to any particular devices.

  • pmd.net.txgbe.init (default level is notice)

    Extra logging of the messages during PMD initialization.

  • pmd.net.txgbe.bp (default level is notice)

    Extra logging of auto-negotiation process for backplane NICs. Supply --log-level=pmd.net.txgbe.bp:debug to view messages.

53.3.3. Runtime Options

The following devargs options can be enabled at runtime. They must be passed as part of EAL arguments. For example,

dpdk-testpmd -a 01:00.0,auto_neg=1 -- -i

Please note that following devargs are only set for backplane NICs.

  • auto_neg (default 1)

    Toggle behavior to use auto-negotiation mode or force mode to link up backplane NICs.

  • poll (default 0)

    Toggle behavior to enable/disable polling mode to receive AN interrupt.

  • present (default 0)

    Toggle behavior to use present mode or init mode.

  • sgmii (default 0)

    Special treatment for KX SGMII cards.

  • ffe_set (default 0)

    Use to set PHY link mode and enable FFE parameters for user debugging. If disabled, the FFE parameters will not take effect. Otherwise, set 1 for SFI mode, set 2 for KR mode, set 3 for KX4 mode, set 4 for KX mode.

  • ffe_main (default 27)

    PHY parameter used for user debugging. Setting other values to take effect requires setting the ffe_set.

  • ffe_pre (default 8)

    PHY parameter used for user debugging. Setting other values to take effect requires setting the ffe_set.

  • ffe_post (default 44)

    PHY parameter used for user debugging. Setting other values to take effect requires setting the ffe_set.

53.4. Driver compilation and testing

Refer to the document compiling and testing a PMD for a NIC for details.

53.5. Sample Application Notes

53.5.1. Generic flow API

TXGBE PMD supports generic flow API which configures hardware to match specific ingress or egress traffic, alter its fate and query related counters according to any number of user-defined rules.

A flow rule is the combination of attributes with a matching pattern and a list of actions. Theoretically one rule can match more than one filters, which named for different patterns and actions. Like ethertype filter defines a rule in pattern: the first not void item can be ETH, and the next not void item must be END.

For example, create a flow rule:

testpmd> flow create 0 ingress pattern eth type is 0x0806 / end actions queue index 2 / end

For a detailed usage description please refer to “Flow rules management” section in DPDK Testpmd Runtime Functions.

53.5.2. Traffic Management API

TXGBE PMD supports generic DPDK Traffic Management API which allows to configure the following features: hierarchical scheduling, traffic shaping, congestion management, packet marking.

For example, add shaper profile

testpmd> add port tm node shaper profile 0 0 0 0 25000000 0 0

For a detailed usage description please refer to “Traffic Management” section in DPDK Testpmd Runtime Functions.

53.6. Limitations or Known issues

Build with ICC is not supported yet. Power8, ARMv7 and BSD are not supported yet.