Rawdev Drivers

The following are a list of raw device PMDs, which can be used from an application through rawdev API.

• 1. NXP DPAA2 CMDIF Driver
  • 1.1. Features
  • 1.2. Supported DPAA2 SoCs
  • 1.3. Prerequisites
  • 1.4. Enabling logs
  • 1.5. Initialization
• 2. NXP DPAA2 QDMA Driver
  • 2.1. Features
  • 2.2. Supported DPAA2 SoCs
  • 2.3. Prerequisites
  • 2.4. Enabling logs
  • 2.5. Initialization
• 3. IFPGA Rawdev Driver
  • 3.1. Implementation details
  • 3.2. Run-time parameters
• 4. IOAT Rawdev Driver
  • 4.1. Hardware Requirements
  • 4.2. Compilation
  • 4.3. Device Setup
  • 4.4. Using IOAT Rawdev Devices
• 5. NTB Rawdev Driver
  • 5.1. BIOS setting on Intel Xeon
  • 5.2. Device Setup
  • 5.3. Prerequisites
  • 5.4. Ring Layout
  • 5.5. Limitation
• 6. OCTEON TX2 DMA Driver
  • 6.1. Features
  • 6.2. Prerequisites and Compilation procedure
  • 6.3. Enabling logs
  • 6.4. Initialization
  • 6.5. Device Setup
  • 6.6. Device Configuration
  • 6.7. Performing Data Transfer
  • 6.8. Self test
• 7. Marvell OCTEON TX2 End Point Rawdev Driver
  • 7.1. Features
  • 7.2. Initialization
  • 7.3. Device Setup
  • 7.4. Device Configuration
  • 7.5. Performing Data Transfer
  • 7.6. Self test