39. Internet Protocol (IP) Pipeline Application

39.1. Application overview

The Internet Protocol (IP) Pipeline application is intended to be a vehicle for rapid development of packet processing applications on multi-core CPUs.

Following OpenFlow and P4 design principles, the application can be used to create functional blocks called pipelines out of input/output ports, tables and actions in a modular way. Multiple pipelines can be inter-connected through packet queues to create complete applications (super-pipelines).

The pipelines are mapped to application threads, with each pipeline executed by a single thread and each thread able to run one or several pipelines. The possibilities of creating pipelines out of ports, tables and actions, connecting multiple pipelines together and mapping the pipelines to execution threads are endless, therefore this application can be seen as a true application generator.

Pipelines are created and managed through Command Line Interface (CLI):

  • Any standard TCP client (e.g. telnet, netcat, custom script, etc) is typically able to connect to the application, send commands through the network and wait for the response before pushing the next command.

  • All the application objects are created and managed through CLI commands:

    • ‘Primitive’ objects used to create pipeline ports: memory pools, links (i.e. network interfaces), SW queues, traffic managers, etc.

    • Action profiles: used to define the actions to be executed by pipeline input/output ports and tables.

    • Pipeline components: input/output ports, tables, pipelines, mapping of pipelines to execution threads.

39.2. Running the application

The application startup command line is:

dpdk-ip_pipeline [EAL_ARGS] -- [-s SCRIPT_FILE] [-h HOST] [-p PORT]

The application startup arguments are:

-s SCRIPT_FILE

  • Optional: Yes

  • Default: Not present

  • Argument: Path to the CLI script file to be run at application startup. No CLI script file will run at startup if this argument is not present.

-h HOST

  • Optional: Yes

  • Default: 0.0.0.0

  • Argument: IP Address of the host running ip pipeline application to be used by remote TCP based client (telnet, netcat, etc.) for connection.

-p PORT

  • Optional: Yes

  • Default: 8086

  • Argument: TCP port number at which the ip pipeline is running. This port number should be used by remote TCP client (such as telnet, netcat, etc.) to connect to host application.

Refer to DPDK Getting Started Guide for general information on running applications and the Environment Abstraction Layer (EAL) options.

The following is an example command to run ip pipeline application configured for layer 2 forwarding:

$ ./<build_dir>/examples/dpdk-ip_pipeline -c 0x3 -- -s examples/route_ecmp.cli

The application should start successfully and display as follows:

EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/.rte_unix
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL:   probe driver: 8086:10fb net_ixgbe
...

To run remote client (e.g. telnet) to communicate with the ip pipeline application:

$ telnet 127.0.0.1 8086

When running a telnet client as above, command prompt is displayed:

Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.

Welcome to IP Pipeline!

pipeline>

Once application and telnet client start running, messages can be sent from client to application. At any stage, telnet client can be terminated using the quit command.

39.3. Application stages

39.3.1. Initialization

During this stage, EAL layer is initialised and application specific arguments are parsed. Furthermore, the data structures (i.e. linked lists) for application objects are initialized. In case of any initialization error, an error message is displayed and the application is terminated.

39.3.2. Run-time

The main thread is creating and managing all the application objects based on CLI input.

Each data plane thread runs one or several pipelines previously assigned to it in round-robin order. Each data plane thread executes two tasks in time-sharing mode:

  1. Packet processing task: Process bursts of input packets read from the pipeline input ports.

  2. Message handling task: Periodically, the data plane thread pauses the packet processing task and polls for request messages send by the main thread. Examples: add/remove pipeline to/from current data plane thread, add/delete rules to/from given table of a specific pipeline owned by the current data plane thread, read statistics, etc.

39.4. Examples

Table 39.1 Pipeline examples provided with the application

Name

Table(s)

Actions

Messages

L2fwd

Note: Implemented using pipeline with a simple pass-through connection between input and output ports.

Stub

Forward

  1. Mempool create

  2. Link create

  3. Pipeline create

  4. Pipeline port in/out

  5. Pipeline table

  6. Pipeline port in table

  7. Pipeline enable

  8. Pipeline table rule add

Flow classification

Exact match

  • Key = byte array

    (16 bytes)

  • Offset = 278

  • Table size = 64K

Forward

  1. Mempool create

  2. Link create

  3. Pipeline create

  4. Pipeline port in/out

  5. Pipeline table

  6. Pipeline port in table

  7. Pipeline enable

  8. Pipeline table rule add default

  9. Pipeline table rule add

KNI

Stub

Forward

  1. Mempool create

  2. Link create

  3. Pipeline create

  4. Pipeline port in/out

  5. Pipeline table

  6. Pipeline port in table

  7. Pipeline enable

  8. Pipeline table rule add

Firewall

ACL

  • Key = n-tuple

  • Offset = 270

  • Table size = 4K

Allow/Drop

  1. Mempool create

  2. Link create

  3. Pipeline create

  4. Pipeline port in/out

  5. Pipeline table

  6. Pipeline port in table

  7. Pipeline enable

  8. Pipeline table rule add default

  9. Pipeline table rule add

IP routing

LPM (IPv4)

  • Key = IP dest addr

  • Offset = 286

  • Table size = 4K

Forward

  1. Mempool Create

  2. Link create

  3. Pipeline create

  4. Pipeline port in/out

  5. Pipeline table

  6. Pipeline port in table

  7. Pipeline enable

  8. Pipeline table rule add default

  9. Pipeline table rule add

Equal-cost multi-path routing (ECMP)

LPM (IPv4)

  • Key = IP dest addr

  • Offset = 286

  • Table size = 4K

Array

  • Key = Array index

  • Offset = 256

  • Size = 64K

Forward, load balance, encap ether

  1. Mempool Create

  2. Link create

  3. Pipeline create

  4. Pipeline port in/out

  5. Pipeline table (LPM)

  6. Pipeline table (Array)

  7. Pipeline port in table (LPM)

  8. Pipeline enable

  9. Pipeline table rule add default

  10. Pipeline table rule add(LPM)

  11. Pipeline table rule add(Array)

39.5. Command Line Interface (CLI)

39.5.2. Mempool

Mempool create

mempool <mempool_name> buffer <buffer_size>
pool <pool_size> cache <cache_size> cpu <cpu_id>

39.5.3. Software queue

Create software queue

swq <swq_name> size <size> cpu <cpu_id>

39.5.4. Traffic manager

Add traffic manager subport profile

tmgr subport profile
 <tb_rate> <tb_size>
 <tc0_rate> <tc1_rate> <tc2_rate> <tc3_rate> <tc4_rate>
 <tc5_rate> <tc6_rate> <tc7_rate> <tc8_rate>
 <tc9_rate> <tc10_rate> <tc11_rate> <tc12_rate>
 <tc_period>

Add traffic manager pipe profile

tmgr pipe profile
 <tb_rate> <tb_size>
 <tc0_rate> <tc1_rate> <tc2_rate> <tc3_rate> <tc4_rate>
 <tc5_rate> <tc6_rate> <tc7_rate> <tc8_rate>
 <tc9_rate> <tc10_rate> <tc11_rate> <tc12_rate>
 <tc_period>
 <tc_ov_weight>
 <wrr_weight0..3>

Create traffic manager port

tmgr <tmgr_name>
 rate <rate>
 spp <n_subports_per_port>
 pps <n_pipes_per_subport>
 fo <frame_overhead>
 mtu <mtu>
 cpu <cpu_id>

Configure traffic manager subport

tmgr <tmgr_name>
 subport <subport_id>
 profile <subport_profile_id>

Configure traffic manager pipe

tmgr <tmgr_name>
 subport <subport_id>
 pipe from <pipe_id_first> to <pipe_id_last>
 profile <pipe_profile_id>

39.5.5. Tap

Create tap port

tap <name>

39.5.6. Kni

Create kni port

kni <kni_name>
 link <link_name>
 mempool <mempool_name>
 [thread <thread_id>]

39.5.7. Cryptodev

Create cryptodev port

cryptodev <cryptodev_name>
 dev <DPDK Cryptodev PMD name>
 queue <n_queues> <queue_size>

39.5.8. Action profile

Create action profile for pipeline input port

port in action profile <profile_name>
 [filter match | mismatch offset <key_offset> mask <key_mask> key <key_value> port <port_id>]
 [balance offset <key_offset> mask <key_mask> port <port_id0> ... <port_id15>]

Create action profile for the pipeline table

table action profile <profile_name>
 ipv4 | ipv6
 offset <ip_offset>
 fwd
 [balance offset <key_offset> mask <key_mask> outoffset <out_offset>]
 [meter srtcm | trtcm
     tc <n_tc>
     stats none | pkts | bytes | both]
 [tm spp <n_subports_per_port> pps <n_pipes_per_subport>]
 [encap ether | vlan | qinq | mpls | pppoe]
 [nat src | dst
     proto udp | tcp]
 [ttl drop | fwd
     stats none | pkts]
 [stats pkts | bytes | both]
 [sym_crypto cryptodev <cryptodev_name>
     mempool_create <mempool_name> mempool_init <mempool_name>]
 [time]

39.5.9. Pipeline

Create pipeline

pipeline <pipeline_name>
 period <timer_period_ms>
 offset_port_id <offset_port_id>
 cpu <cpu_id>

Create pipeline input port

pipeline <pipeline_name> port in
 bsz <burst_size>
 link <link_name> rxq <queue_id>
 | swq <swq_name>
 | tmgr <tmgr_name>
 | tap <tap_name> mempool <mempool_name> mtu <mtu>
 | kni <kni_name>
 | source mempool <mempool_name> file <file_name> bpp <n_bytes_per_pkt>
 [action <port_in_action_profile_name>]
 [disabled]

Create pipeline output port

pipeline <pipeline_name> port out
 bsz <burst_size>
 link <link_name> txq <txq_id>
 | swq <swq_name>
 | tmgr <tmgr_name>
 | tap <tap_name>
 | kni <kni_name>
 | sink [file <file_name> pkts <max_n_pkts>]

Create pipeline table

pipeline <pipeline_name> table
     match
     acl
         ipv4 | ipv6
         offset <ip_header_offset>
         size <n_rules>
     | array
         offset <key_offset>
         size <n_keys>
     | hash
         ext | lru
         key <key_size>
         mask <key_mask>
         offset <key_offset>
         buckets <n_buckets>
         size <n_keys>
     | lpm
         ipv4 | ipv6
         offset <ip_header_offset>
         size <n_rules>
     | stub
 [action <table_action_profile_name>]

Connect pipeline input port to table

pipeline <pipeline_name> port in <port_id> table <table_id>

Display statistics for specific pipeline input port, output port or table

pipeline <pipeline_name> port in <port_id> stats read [clear]
pipeline <pipeline_name> port out <port_id> stats read [clear]
pipeline <pipeline_name> table <table_id> stats read [clear]

Enable given input port for specific pipeline instance

pipeline <pipeline_name> port out <port_id> disable

Disable given input port for specific pipeline instance

pipeline <pipeline_name> port out <port_id> disable

Add default rule to table for specific pipeline instance

pipeline <pipeline_name> table <table_id> rule add
   match
      default
   action
      fwd
         drop
         | port <port_id>
         | meta
         | table <table_id>

Add rule to table for specific pipeline instance

pipeline <pipeline_name> table <table_id> rule add

match
   acl
      priority <priority>
      ipv4 | ipv6 <sa> <sa_depth> <da> <da_depth>
      <sp0> <sp1> <dp0> <dp1> <proto>
   | array <pos>
   | hash
      raw <key>
      | ipv4_5tuple <sa> <da> <sp> <dp> <proto>
      | ipv6_5tuple <sa> <da> <sp> <dp> <proto>
      | ipv4_addr <addr>
      | ipv6_addr <addr>
      | qinq <svlan> <cvlan>
   | lpm
      ipv4 | ipv6 <addr> <depth>

action
   fwd
      drop
      | port <port_id>
      | meta
      | table <table_id>
   [balance <out0> ... <out7>]
   [meter
      tc0 meter <meter_profile_id> policer g <pa> y <pa> r <pa>
      [tc1 meter <meter_profile_id> policer g <pa> y <pa> r <pa>
      tc2 meter <meter_profile_id> policer g <pa> y <pa> r <pa>
      tc3 meter <meter_profile_id> policer g <pa> y <pa> r <pa>]]
   [tm subport <subport_id> pipe <pipe_id>]
   [encap
      ether <da> <sa>
      | vlan <da> <sa> <pcp> <dei> <vid>
      | qinq <da> <sa> <pcp> <dei> <vid> <pcp> <dei> <vid>
      | mpls unicast | multicast
         <da> <sa>
         label0 <label> <tc> <ttl>
         [label1 <label> <tc> <ttl>
         [label2 <label> <tc> <ttl>
         [label3 <label> <tc> <ttl>]]]
      | pppoe <da> <sa> <session_id>]
   [nat ipv4 | ipv6 <addr> <port>]
   [ttl dec | keep]
   [stats]
   [time]
   [sym_crypto
      encrypt | decrypt
      type
      | cipher
         cipher_algo <algo> cipher_key <key> cipher_iv <iv>
      | cipher_auth
         cipher_algo <algo> cipher_key <key> cipher_iv <iv>
         auth_algo <algo> auth_key <key> digest_size <size>
      | aead
         aead_algo <algo> aead_key <key> aead_iv <iv> aead_aad <aad>
         digest_size <size>
      data_offset <data_offset>]

where:
   <pa> ::= g | y | r | drop

Add bulk rules to table for specific pipeline instance

pipeline <pipeline_name> table <table_id> rule add bulk <file_name> <n_rules>

Where:
- file_name = path to file
- File line format = match <match> action <action>

Delete table rule for specific pipeline instance

pipeline <pipeline_name> table <table_id> rule delete
   match <match>

Delete default table rule for specific pipeline instance

pipeline <pipeline_name> table <table_id> rule delete
   match
      default

Add meter profile to the table for specific pipeline instance

pipeline <pipeline_name> table <table_id> meter profile <meter_profile_id>
 add srtcm cir <cir> cbs <cbs> ebs <ebs>
 | trtcm cir <cir> pir <pir> cbs <cbs> pbs <pbs>

Delete meter profile from the table for specific pipeline instance

pipeline <pipeline_name> table <table_id>
 meter profile <meter_profile_id> delete

Update the dscp table for meter or traffic manager action for specific pipeline instance

pipeline <pipeline_name> table <table_id> dscp <file_name>

Where:
   - file_name = path to file
   - exactly 64 lines
   - File line format = <tc_id> <tc_queue_id> <color>, with <color> as: g | y | r

39.5.10. Pipeline enable/disable

Enable given pipeline instance for specific data plane thread

thread <thread_id> pipeline <pipeline_name> enable

Disable given pipeline instance for specific data plane thread

thread <thread_id> pipeline <pipeline_name> disable