32. Memif Poll Mode Driver

Shared memory packet interface (memif) PMD allows for DPDK and any other client using memif (DPDK, VPP, libmemif) to communicate using shared memory. Memif is Linux only.

The created device transmits packets in a raw format. It can be used with Ethernet mode, IP mode, or Punt/Inject. At this moment, only Ethernet mode is supported in DPDK memif implementation.

Memif works in two roles: master and slave. Slave connects to master over an existing socket. It is also a producer of shared memory file and initializes the shared memory. Each interface can be connected to one peer interface at same time. The peer interface is identified by id parameter. Master creates the socket and listens for any slave connection requests. The socket may already exist on the system. Be sure to remove any such sockets, if you are creating a master interface, or you will see an “Address already in use” error. Function rte_pmd_memif_remove(), which removes memif interface, will also remove a listener socket, if it is not being used by any other interface.

The method to enable one or more interfaces is to use the --vdev=net_memif0 option on the DPDK application command line. Each --vdev=net_memif1 option given will create an interface named net_memif0, net_memif1, and so on. Memif uses unix domain socket to transmit control messages. Each memif has a unique id per socket. This id is used to identify peer interface. If you are connecting multiple interfaces using same socket, be sure to specify unique ids id=0, id=1, etc. Note that if you assign a socket to a master interface it becomes a listener socket. Listener socket can not be used by a slave interface on same client.

Table 32.1 **Memif configuration options**
Option	Description	Default	Valid value
id=0	Used to identify peer interface	0	uint32_t
role=master	Set memif role	slave	master\|slave
bsize=1024	Size of single packet buffer	2048	uint16_t
rsize=11	Log2 of ring size. If rsize is 10, actual ring size is 1024	10	1-14
socket=/tmp/memif.sock	Socket filename	/tmp/memif.sock	string len 108
mac=01:23:45:ab:cd:ef	Mac address	01:ab:23:cd:45:ef
secret=abc123	Secret is an optional security option, which if specified, must be matched by peer		string len 24
zero-copy=yes	Enable/disable zero-copy slave mode. Only relevant to slave, requires ‘–single-file-segments’ eal argument	no	yes\|no

Connection establishment

In order to create memif connection, two memif interfaces, each in separate process, are needed. One interface in master role and other in slave role. It is not possible to connect two interfaces in a single process. Each interface can be connected to one interface at same time, identified by matching id parameter.

Memif driver uses unix domain socket to exchange required information between memif interfaces. Socket file path is specified at interface creation see Memif configuration options table above. If socket is used by master interface, it’s marked as listener socket (in scope of current process) and listens to connection requests from other processes. One socket can be used by multiple interfaces. One process can have slave and master interfaces at the same time, provided each role is assigned unique socket.

For detailed information on memif control messages, see: net/memif/memif.h.

Slave interface attempts to make a connection on assigned socket. Process listening on this socket will extract the connection request and create a new connected socket (control channel). Then it sends the ‘hello’ message (MEMIF_MSG_TYPE_HELLO), containing configuration boundaries. Slave interface adjusts its configuration accordingly, and sends ‘init’ message (MEMIF_MSG_TYPE_INIT). This message among others contains interface id. Driver uses this id to find master interface, and assigns the control channel to this interface. If such interface is found, ‘ack’ message (MEMIF_MSG_TYPE_ACK) is sent. Slave interface sends ‘add region’ message (MEMIF_MSG_TYPE_ADD_REGION) for every region allocated. Master responds to each of these messages with ‘ack’ message. Same behavior applies to rings. Slave sends ‘add ring’ message (MEMIF_MSG_TYPE_ADD_RING) for every initialized ring. Master again responds to each message with ‘ack’ message. To finalize the connection, slave interface sends ‘connect’ message (MEMIF_MSG_TYPE_CONNECT). Upon receiving this message master maps regions to its address space, initializes rings and responds with ‘connected’ message (MEMIF_MSG_TYPE_CONNECTED). Disconnect (MEMIF_MSG_TYPE_DISCONNECT) can be sent by both master and slave interfaces at any time, due to driver error or if the interface is being deleted.

Files

net/memif/memif.h - control messages definitions
net/memif/memif_socket.h
net/memif/memif_socket.c

32.1. Shared memory

Shared memory format

Slave is producer and master is consumer. Memory regions, are mapped shared memory files, created by memif slave and provided to master at connection establishment. Regions contain rings and buffers. Rings and buffers can also be separated into multiple regions. For no-zero-copy, rings and buffers are stored inside single memory region to reduce the number of opened files.

region n (no-zero-copy):

Rings		Buffers
S2M rings	M2S rings	packet buffer 0	.	pb ((1 << pmd->run.log2_ring_size)*(s2m + m2s))-1

S2M OR M2S Rings:

ring 0

ring 1

ring num_s2m_rings - 1

ring 0:

ring header

(1 << pmd->run.log2_ring_size) * desc

Descriptors are assigned packet buffers in order of rings creation. If we have one ring in each direction and ring size is 1024, then first 1024 buffers will belong to S2M ring and last 1024 will belong to M2S ring. In case of zero-copy, buffers are dequeued and enqueued as needed.

Descriptor format

Quad Word	6	3	3	1	1
Quad Word	3	2	1	6	5	0
0	length		region		flags
1	metadata		offset
	6	3	3
	3	2	1			0

Flags field - flags (Quad Word 0, bits 0:15)

Bits	Name	Functionality
0	MEMIF_DESC_FLAG_NEXT	Is chained buffer. When set, the packet is divided into multiple buffers. May not be contiguous.

Region index - region (Quad Word 0, 16:31)

Index of memory region, the buffer is located in.

Data length - length (Quad Word 0, 32:63)

Length of transmitted/received data.

Data Offset - offset (Quad Word 1, 0:31)

Data start offset from memory region address. .regions[desc->region].addr + desc->offset

Metadata - metadata (Quad Word 1, 32:63)

Buffer metadata.

Files

net/memif/memif.h - descriptor and ring definitions
net/memif/rte_eth_memif.c - eth_memif_rx() eth_memif_tx()

32.2. Zero-copy slave

Zero-copy slave can be enabled with memif configuration option ‘zero-copy=yes’. This option is only relevant to slave and requires eal argument ‘–single-file-segments’. This limitation is in place, because it is too expensive to identify memseg for each packet buffer, resulting in worse performance than with zero-copy disabled. With single file segments we can calculate offset from the beginning of the file for each packet buffer.

Shared memory format

Region 0 is created by memif driver and contains rings. Slave interface exposes DPDK memory (memseg). Instead of using memfd_create() to create new shared file, existing memsegs are used. Master interface functions the same as with zero-copy disabled.

region 0:

Rings
S2M rings	M2S rings

region n:

Buffers

memseg

Buffers are dequeued and enqueued as needed. Offset descriptor field is calculated at tx. Only single file segments mode (EAL option –single-file-segments) is supported, as calculating offset from multiple segments is too expensive.

32.2.1. Example: testpmd

In this example we run two instances of testpmd application and transmit packets over memif.

First create master interface:

#./build/app/testpmd -l 0-1 --proc-type=primary --file-prefix=pmd1 --vdev=net_memif,role=master -- -i

Now create slave interface (master must be already running so the slave will connect):

#./build/app/testpmd -l 2-3 --proc-type=primary --file-prefix=pmd2 --vdev=net_memif -- -i

You can also enable zero-copy on slave interface:

#./build/app/testpmd -l 2-3 --proc-type=primary --file-prefix=pmd2 --vdev=net_memif,zero-copy=yes --single-file-segments -- -i

Start forwarding packets:

Slave:
    testpmd> start

Master:
    testpmd> start tx_first

Show status:

testpmd> show port stats 0

For more details on testpmd please refer to Testpmd Application User Guide.

32.2.2. Example: testpmd and VPP

For information on how to get and run VPP please see https://wiki.fd.io/view/VPP.

Start VPP in interactive mode (should be by default). Create memif master interface in VPP:

vpp# create interface memif id 0 master no-zero-copy
vpp# set interface state memif0/0 up
vpp# set interface ip address memif0/0 192.168.1.1/24

To see socket filename use show memif command:

vpp# show memif
sockets
 id  listener    filename
  0   yes (1)     /run/vpp/memif.sock
...

Now create memif interface by running testpmd with these command line options:

#./testpmd --vdev=net_memif,socket=/run/vpp/memif.sock -- -i

Testpmd should now create memif slave interface and try to connect to master. In testpmd set forward option to icmpecho and start forwarding:

testpmd> set fwd icmpecho
testpmd> start

Send ping from VPP:

vpp# ping 192.168.1.2
bytes from 192.168.1.2: icmp_seq=2 ttl=254 time=36.2918 ms
bytes from 192.168.1.2: icmp_seq=3 ttl=254 time=23.3927 ms
bytes from 192.168.1.2: icmp_seq=4 ttl=254 time=24.2975 ms
bytes from 192.168.1.2: icmp_seq=5 ttl=254 time=17.7049 ms

32.2.3. Example: testpmd memif loopback

In this example we will create 2 memif ports connected into loopback. The situation is analogous to cross connecting 2 ports of the NIC by cable.

To set the loopback, just use the same socket and id with different roles:

#./testpmd --vdev=net_memif0,role=master,id=0 --vdev=net_memif1,role=slave,id=0 -- -i

Then start the communication:

testpmd> start tx_first

Finally we can check port stats to see the traffic:

testpmd> show port stats all
testpmd> show port stats all