.. SPDX-License-Identifier: BSD-3-Clause Copyright(C) 2019 Marvell International Ltd. OCTEON TX2 Poll Mode driver =========================== The OCTEON TX2 ETHDEV PMD (**librte_pmd_octeontx2**) provides poll mode ethdev driver support for the inbuilt network device found in **Marvell OCTEON TX2** SoC family as well as for their virtual functions (VF) in SR-IOV context. More information can be found at `Marvell Official Website `_. Features -------- Features of the OCTEON TX2 Ethdev PMD are: - Packet type information - Promiscuous mode - Jumbo frames - SR-IOV VF - Lock-free Tx queue - Multiple queues for TX and RX - Receiver Side Scaling (RSS) - MAC/VLAN filtering - Multicast MAC filtering - Generic flow API - Inner and Outer Checksum offload - VLAN/QinQ stripping and insertion - Port hardware statistics - Link state information - Link flow control - MTU update - Scatter-Gather IO support - Vector Poll mode driver - Debug utilities - Context dump and error interrupt support - IEEE1588 timestamping - HW offloaded `ethdev Rx queue` to `eventdev event queue` packet injection - Support Rx interrupt Prerequisites ------------- See :doc:`../platform/octeontx2` for setup information. Compile time Config Options --------------------------- The following options may be modified in the ``config`` file. - ``CONFIG_RTE_LIBRTE_OCTEONTX2_PMD`` (default ``y``) Toggle compilation of the ``librte_pmd_octeontx2`` driver. Driver compilation and testing ------------------------------ Refer to the document :ref:`compiling and testing a PMD for a NIC ` for details. To compile the OCTEON TX2 PMD for Linux arm64 gcc, use arm64-octeontx2-linux-gcc as target. #. Running testpmd: Follow instructions available in the document :ref:`compiling and testing a PMD for a NIC ` to run testpmd. Example output: .. code-block:: console ./build/app/testpmd -c 0x300 -w 0002:02:00.0 -- --portmask=0x1 --nb-cores=1 --port-topology=loop --rxq=1 --txq=1 EAL: Detected 24 lcore(s) EAL: Detected 1 NUMA nodes EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: No available hugepages reported in hugepages-2048kB EAL: Probing VFIO support... EAL: VFIO support initialized EAL: PCI device 0002:02:00.0 on NUMA socket 0 EAL: probe driver: 177d:a063 net_octeontx2 EAL: using IOMMU type 1 (Type 1) testpmd: create a new mbuf pool : n=267456, size=2176, socket=0 testpmd: preferred mempool ops selected: octeontx2_npa Configuring Port 0 (socket 0) PMD: Port 0: Link Up - speed 40000 Mbps - full-duplex Port 0: link state change event Port 0: 36:10:66:88:7A:57 Checking link statuses... Done No commandline core given, start packet forwarding io packet forwarding - ports=1 - cores=1 - streams=1 - NUMA support enabled, MP allocation mode: native Logical Core 9 (socket 0) forwards packets on 1 streams: RX P=0/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00 io packet forwarding packets/burst=32 nb forwarding cores=1 - nb forwarding ports=1 port 0: RX queue number: 1 Tx queue number: 1 Rx offloads=0x0 Tx offloads=0x10000 RX queue: 0 RX desc=512 - RX free threshold=0 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 RX Offloads=0x0 TX queue: 0 TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX offloads=0x10000 - TX RS bit threshold=0 Press enter to exit Runtime Config Options ---------------------- - ``Rx&Tx scalar mode enable`` (default ``0``) Ethdev supports both scalar and vector mode, it may be selected at runtime using ``scalar_enable`` ``devargs`` parameter. - ``RSS reta size`` (default ``64``) RSS redirection table size may be configured during runtime using ``reta_size`` ``devargs`` parameter. For example:: -w 0002:02:00.0,reta_size=256 With the above configuration, reta table of size 256 is populated. - ``Flow priority levels`` (default ``3``) RTE Flow priority levels can be configured during runtime using ``flow_max_priority`` ``devargs`` parameter. For example:: -w 0002:02:00.0,flow_max_priority=10 With the above configuration, priority level was set to 10 (0-9). Max priority level supported is 32. - ``Reserve Flow entries`` (default ``8``) RTE flow entries can be pre allocated and the size of pre allocation can be selected runtime using ``flow_prealloc_size`` ``devargs`` parameter. For example:: -w 0002:02:00.0,flow_prealloc_size=4 With the above configuration, pre alloc size was set to 4. Max pre alloc size supported is 32. - ``Max SQB buffer count`` (default ``512``) Send queue descriptor buffer count may be limited during runtime using ``max_sqb_count`` ``devargs`` parameter. For example:: -w 0002:02:00.0,max_sqb_count=64 With the above configuration, each send queue's descriptor buffer count is limited to a maximum of 64 buffers. - ``switch header enable`` (default ``none``) A port can be configured to a specific switch header type by using ``switch_header`` ``devargs`` parameter. For example:: -w 0002:02:00.0,switch_header="higig2" With the above configuration, higig2 will be enabled on that port and the traffic on this port should be higig2 traffic only. Supported switch header types are "higig2" and "dsa". .. note:: Above devarg parameters are configurable per device, user needs to pass the parameters to all the PCIe devices if application requires to configure on all the ethdev ports. Limitations ----------- ``mempool_octeontx2`` external mempool handler dependency ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The OCTEON TX2 SoC family NIC has inbuilt HW assisted external mempool manager. ``net_octeontx2`` PMD only works with ``mempool_octeontx2`` mempool handler as it is performance wise most effective way for packet allocation and Tx buffer recycling on OCTEON TX2 SoC platform. CRC stripping ~~~~~~~~~~~~~ The OCTEON TX2 SoC family NICs strip the CRC for every packet being received by the host interface irrespective of the offload configuration. Multicast MAC filtering ~~~~~~~~~~~~~~~~~~~~~~~ ``net_octeontx2`` PMD supports multicast mac filtering feature only on physical function devices. SDP interface support ~~~~~~~~~~~~~~~~~~~~~ OCTEON TX2 SDP interface support is limited to PF device, No VF support. Debugging Options ----------------- .. _table_octeontx2_ethdev_debug_options: .. table:: OCTEON TX2 ethdev debug options +---+------------+-------------------------------------------------------+ | # | Component | EAL log command | +===+============+=======================================================+ | 1 | NIX | --log-level='pmd\.net.octeontx2,8' | +---+------------+-------------------------------------------------------+ | 2 | NPC | --log-level='pmd\.net.octeontx2\.flow,8' | +---+------------+-------------------------------------------------------+ RTE Flow Support ---------------- The OCTEON TX2 SoC family NIC has support for the following patterns and actions. Patterns: .. _table_octeontx2_supported_flow_item_types: .. table:: Item types +----+--------------------------------+ | # | Pattern Type | +====+================================+ | 1 | RTE_FLOW_ITEM_TYPE_ETH | +----+--------------------------------+ | 2 | RTE_FLOW_ITEM_TYPE_VLAN | +----+--------------------------------+ | 3 | RTE_FLOW_ITEM_TYPE_E_TAG | +----+--------------------------------+ | 4 | RTE_FLOW_ITEM_TYPE_IPV4 | +----+--------------------------------+ | 5 | RTE_FLOW_ITEM_TYPE_IPV6 | +----+--------------------------------+ | 6 | RTE_FLOW_ITEM_TYPE_ARP_ETH_IPV4| +----+--------------------------------+ | 7 | RTE_FLOW_ITEM_TYPE_MPLS | +----+--------------------------------+ | 8 | RTE_FLOW_ITEM_TYPE_ICMP | +----+--------------------------------+ | 9 | RTE_FLOW_ITEM_TYPE_UDP | +----+--------------------------------+ | 10 | RTE_FLOW_ITEM_TYPE_TCP | +----+--------------------------------+ | 11 | RTE_FLOW_ITEM_TYPE_SCTP | +----+--------------------------------+ | 12 | RTE_FLOW_ITEM_TYPE_ESP | +----+--------------------------------+ | 13 | RTE_FLOW_ITEM_TYPE_GRE | +----+--------------------------------+ | 14 | RTE_FLOW_ITEM_TYPE_NVGRE | +----+--------------------------------+ | 15 | RTE_FLOW_ITEM_TYPE_VXLAN | +----+--------------------------------+ | 16 | RTE_FLOW_ITEM_TYPE_GTPC | +----+--------------------------------+ | 17 | RTE_FLOW_ITEM_TYPE_GTPU | +----+--------------------------------+ | 18 | RTE_FLOW_ITEM_TYPE_GENEVE | +----+--------------------------------+ | 19 | RTE_FLOW_ITEM_TYPE_VXLAN_GPE | +----+--------------------------------+ | 20 | RTE_FLOW_ITEM_TYPE_IPV6_EXT | +----+--------------------------------+ | 21 | RTE_FLOW_ITEM_TYPE_VOID | +----+--------------------------------+ | 22 | RTE_FLOW_ITEM_TYPE_ANY | +----+--------------------------------+ | 23 | RTE_FLOW_ITEM_TYPE_GRE_KEY | +----+--------------------------------+ | 24 | RTE_FLOW_ITEM_TYPE_HIGIG2 | +----+--------------------------------+ .. note:: ``RTE_FLOW_ITEM_TYPE_GRE_KEY`` works only when checksum and routing bits in the GRE header are equal to 0. Actions: .. _table_octeontx2_supported_ingress_action_types: .. table:: Ingress action types +----+--------------------------------+ | # | Action Type | +====+================================+ | 1 | RTE_FLOW_ACTION_TYPE_VOID | +----+--------------------------------+ | 2 | RTE_FLOW_ACTION_TYPE_MARK | +----+--------------------------------+ | 3 | RTE_FLOW_ACTION_TYPE_FLAG | +----+--------------------------------+ | 4 | RTE_FLOW_ACTION_TYPE_COUNT | +----+--------------------------------+ | 5 | RTE_FLOW_ACTION_TYPE_DROP | +----+--------------------------------+ | 6 | RTE_FLOW_ACTION_TYPE_QUEUE | +----+--------------------------------+ | 7 | RTE_FLOW_ACTION_TYPE_RSS | +----+--------------------------------+ | 8 | RTE_FLOW_ACTION_TYPE_SECURITY | +----+--------------------------------+ | 9 | RTE_FLOW_ACTION_TYPE_PF | +----+--------------------------------+ | 10 | RTE_FLOW_ACTION_TYPE_VF | +----+--------------------------------+ .. _table_octeontx2_supported_egress_action_types: .. table:: Egress action types +----+--------------------------------+ | # | Action Type | +====+================================+ | 1 | RTE_FLOW_ACTION_TYPE_COUNT | +----+--------------------------------+ | 2 | RTE_FLOW_ACTION_TYPE_DROP | +----+--------------------------------+