.. SPDX-License-Identifier: BSD-3-Clause Copyright(c) 2017 Intel Corporation dpdk-test-bbdev Application =========================== The ``dpdk-test-bbdev`` tool is a Data Plane Development Kit (DPDK) utility that allows measuring performance parameters of PMDs available in the bbdev framework. Available tests available for execution are: latency, throughput, validation and sanity tests. Execution of tests can be customized using various parameters passed to a python running script. Compiling the Application ------------------------- **Step 1: PMD setting** The ``dpdk-test-bbdev`` tool depends on crypto device drivers PMD which are disabled by default in the build configuration file ``common_base``. The bbdevice drivers PMD which should be tested can be enabled by setting ``CONFIG_RTE_LIBRTE_PMD_=y`` Setting example for (*turbo_sw*) PMD ``CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y`` **Step 2: Build the application** Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the ``dpdk-test-bbdev`` application. Initially, the user must select a DPDK target to choose the correct target type and compiler options to use when building the libraries. The user must have all libraries, modules, updates and compilers installed in the system prior to this, as described in the earlier chapters in this Getting Started Guide. Running the Application ----------------------- The tool application has a number of command line options: .. code-block:: console python test-bbdev.py [-h] [-p TESTAPP_PATH] [-e EAL_PARAMS] [-t TIMEOUT] [-c TEST_CASE [TEST_CASE ...]] [-v TEST_VECTOR [TEST_VECTOR...]] [-n NUM_OPS] [-b BURST_SIZE [BURST_SIZE ...]] [-l NUM_LCORES] command-line Options ~~~~~~~~~~~~~~~~~~~~ The following are the command-line options: ``-h, --help`` Shows help message and exit. ``-p TESTAPP_PATH, --testapp_path TESTAPP_PATH`` Indicates the path to the bbdev test app. If not specified path is set based on *$RTE_SDK* environment variable concatenated with "*/build/app/testbbdev*". ``-e EAL_PARAMS, --eal_params EAL_PARAMS`` Specifies EAL arguments which are passed to the test app. For more details, refer to DPDK documentation at http://dpdk.org/doc. ``-t TIMEOUT, --timeout TIMEOUT`` Specifies timeout in seconds. If not specified timeout is set to 300 seconds. ``-c TEST_CASE [TEST_CASE ...], --test_cases TEST_CASE [TEST_CASE ...]`` Defines test cases to run. If not specified all available tests are run. The following tests can be run: * unittest Small unit tests witch check basic functionality of bbdev library. * latency Test calculates three latency metrics: * offload_latency_tc measures the cost of offloading enqueue and dequeue operations. * offload_latency_empty_q_tc measures the cost of offloading a dequeue operation from an empty queue. checks how long last dequeueing if there is no operations to dequeue * operation_latency_tc measures the time difference from the first attempt to enqueue till the first successful dequeue. * validation Test do enqueue on given vector and compare output after dequeueing. * throughput Test measures the achieved throughput on the available lcores. Results are printed in million operations per second and million bits per second. * interrupt The same test as 'throughput' but uses interrupts instead of PMD to perform the dequeue. **Example usage:** ``./test-bbdev.py -c validation`` Runs validation test suite ``./test-bbdev.py -c latency throughput`` Runs latency and throughput test suites ``-v TEST_VECTOR [TEST_VECTOR ...], --test_vector TEST_VECTOR [TEST_VECTOR ...]`` Specifies paths to the test vector files. If not specified path is set based on *$RTE_SDK* environment variable concatenated with "*/app/test-bbdev/test_vectors/bbdev_vector_null.data*" and indicates default data file. **Example usage:** ``./test-bbdev.py -v app/test-bbdev/test_vectors/bbdev_vector_td_test1.data`` Fills vector based on bbdev_vector_td_test1.data file and runs all tests ``./test-bbdev.py -v bbdev_vector_td_test1.data bbdev_vector_te_test2.data`` The bbdev test app is executed twice. First time vector is filled based on *bbdev_vector_td_test1.data* file and second time based on *bbdev_vector_te_test2.data* file. For both executions all tests are run. ``-n NUM_OPS, --num_ops NUM_OPS`` Specifies number of operations to process on device. If not specified num_ops is set to 32 operations. ``-l NUM_LCORES, --num_lcores NUM_LCORES`` Specifies number of lcores to run. If not specified num_lcores is set according to value from RTE configuration (EAL coremask) ``-b BURST_SIZE [BURST_SIZE ...], --burst-size BURST_SIZE [BURST_SIZE ...]`` Specifies operations enqueue/dequeue burst size. If not specified burst_size is set to 32. Maximum is 512. Parameter globbing ~~~~~~~~~~~~~~~~~~ Thanks to the globbing functionality in python test-bbdev.py script allows to run tests with different set of vector files without giving all of them explicitly. **Example usage:** .. code-block:: console ./test-bbdev.py -v app/test-bbdev/test_vectors/bbdev_vector_*.data It runs all tests with following vectors: - ``bbdev_vector_null.data`` - ``bbdev_vector_td_default.data`` - ``bbdev_vector_te_default.data`` .. code-block:: console ./test-bbdev.py -v app/test-bbdev/test_vectors/bbdev_vector_t?_default.data It runs all tests with "default" vectors: - ``bbdev_vector_te_default.data`` - ``bbdev_vector_td_default.data`` Running Tests ------------- Shortened tree of isg_cid-wireless_dpdk_ae with dpdk compiled for x86_64-native-linuxapp-icc target: :: |-- app |-- test-bbdev |-- test_vectors |-- bbdev_vector_null.data |-- bbdev_vector_td_default.data |-- bbdev_vector_te_default.data |-- x86_64-native-linuxapp-icc |-- app |-- testbbdev All bbdev devices ~~~~~~~~~~~~~~~~~ .. code-block:: console ./test-bbdev.py -p ../../x86_64-native-linuxapp-icc/app/testbbdev -v ./test_vectors/bbdev_vector_td_default.data It runs all available tests using the test vector filled based on *bbdev_vector_td_default.data* file. By default number of operations to process on device is set to 32, timeout is set to 300s and operations enqueue/dequeue burst size is set to 32. Moreover a bbdev (*bbdev_null*) device will be created. bbdev turbo_sw device ~~~~~~~~~~~~~~~~~~~~~ .. code-block:: console ./test-bbdev.py -p ../../x86_64-native-linuxapp-icc/app/testbbdev -e="--vdev=turbo_sw" -t 120 -c validation -v ./test_vectors/bbdev_vector_t?_default.data -n 64 -b 8 32 It runs **validation** test for each vector file that matches the given pattern. Number of operations to process on device is set to 64 and operations timeout is set to 120s and enqueue/dequeue burst size is set to 8 and to 32. Moreover a bbdev (*turbo_sw*) device will be created. bbdev null device ~~~~~~~~~~~~~~~~~ Executing bbdev null device with *bbdev_vector_null.data* helps in measuring the overhead introduced by the bbdev framework. .. code-block:: console ./test-bbdev.py -e="--vdev=bbdev_null0" -v ./test_vectors/bbdev_vector_null.data **Note:** bbdev_null device does not have to be defined explicitly as it is created by default. Test Vector files ================= Test Vector files contain the data which is used to set turbo decoder/encoder parameters and buffers for validation purpose. New test vector files should be stored in ``app/test-bbdev/test_vectors/`` directory. Detailed description of the syntax of the test vector files is in the following section. Basic principles for test vector files -------------------------------------- Line started with ``#`` is treated as a comment and is ignored. If variable is a chain of values, values should be separated by a comma. If assignment is split into several lines, each line (except the last one) has to be ended with a comma. There is no comma after last value in last line. Correct assignment should look like the following: .. parsed-literal:: variable = value, value, value, value, value, value In case where variable is a single value correct assignment looks like the following: .. parsed-literal:: variable = value Length of chain variable is calculated by parser. Can not be defined explicitly. Variable op_type has to be defined as a first variable in file. It specifies what type of operations will be executed. For decoder op_type has to be set to ``RTE_BBDEV_OP_TURBO_DEC`` and for encoder to ``RTE_BBDEV_OP_TURBO_ENC``. Full details of the meaning and valid values for the below fields are documented in *rte_bbdev_op.h* Turbo decoder test vectors template ----------------------------------- For turbo decoder it has to be always set to ``RTE_BBDEV_OP_TURBO_DEC`` .. parsed-literal:: op_type = RTE_BBDEV_OP_TURBO_DEC Chain of uint32_t values. Note that it is possible to define more than one input/output entries which will result in chaining two or more data structures for *segmented Transport Blocks* .. parsed-literal:: input0 = 0x00000000, 0x7f817f00, 0x7f7f8100, 0x817f8100, 0x81008100, 0x7f818100, 0x81817f00, 0x7f818100, 0x81007f00, 0x7f818100, 0x817f8100, 0x81817f00, 0x81008100, 0x817f7f00, 0x7f7f8100, 0x81817f00 Chain of uint32_t values .. parsed-literal:: input1 = 0x7f7f0000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 Chain of uint32_t values .. parsed-literal:: input2 = 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 Chain of uint32_t values .. parsed-literal:: hard_output0 = 0xa7d6732e Chain of uint32_t values .. parsed-literal:: hard_output1 = 0xa61 Chain of uint32_t values .. parsed-literal:: soft_output0 = 0x817f817f, 0x7f817f7f, 0x81818181, 0x817f7f81, 0x7f818181, 0x8181817f, 0x817f817f, 0x8181817f Chain of uint32_t values .. parsed-literal:: soft_output1 = 0x817f7f81, 0x7f7f7f81, 0x7f7f8181 uint32_t value .. parsed-literal:: e = 44 uint16_t value .. parsed-literal:: k = 40 uint8_t value .. parsed-literal:: rv_index = 0 uint8_t value .. parsed-literal:: iter_max = 8 uint8_t value .. parsed-literal:: iter_min = 4 uint8_t value .. parsed-literal:: expected_iter_count = 8 uint8_t value .. parsed-literal:: ext_scale = 15 uint8_t value .. parsed-literal:: num_maps = 0 Chain of flags for turbo decoder operation. Following flags can be used: - ``RTE_BBDEV_TURBO_SUBBLOCK_DEINTERLEAVE`` - ``RTE_BBDEV_TURBO_CRC_TYPE_24B`` - ``RTE_BBDEV_TURBO_EQUALIZER`` - ``RTE_BBDEV_TURBO_SOFT_OUT_SATURATE`` - ``RTE_BBDEV_TURBO_HALF_ITERATION_EVEN`` - ``RTE_BBDEV_TURBO_CONTINUE_CRC_MATCH`` - ``RTE_BBDEV_TURBO_SOFT_OUTPUT`` - ``RTE_BBDEV_TURBO_EARLY_TERMINATION`` - ``RTE_BBDEV_TURBO_DEC_INTERRUPTS`` - ``RTE_BBDEV_TURBO_POS_LLR_1_BIT_IN`` - ``RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN`` - ``RTE_BBDEV_TURBO_POS_LLR_1_BIT_SOFT_OUT`` - ``RTE_BBDEV_TURBO_NEG_LLR_1_BIT_SOFT_OUT`` - ``RTE_BBDEV_TURBO_MAP_DEC`` Example: .. parsed-literal:: op_flags = RTE_BBDEV_TURBO_SUBBLOCK_DEINTERLEAVE, RTE_BBDEV_TURBO_EQUALIZER, RTE_BBDEV_TURBO_SOFT_OUTPUT Chain of operation statuses that are expected after operation is performed. Following statuses can be used: - ``DMA`` - ``FCW`` - ``CRC`` - ``OK`` ``OK`` means no errors are expected. Cannot be used with other values. .. parsed-literal:: expected_status = FCW, CRC Turbo encoder test vectors template ----------------------------------- For turbo encoder it has to be always set to ``RTE_BBDEV_OP_TURBO_ENC`` .. parsed-literal:: op_type = RTE_BBDEV_OP_TURBO_ENC Chain of uint32_t values .. parsed-literal:: input0 = 0x11d2bcac, 0x4d Chain of uint32_t values .. parsed-literal:: output0 = 0xd2399179, 0x640eb999, 0x2cbaf577, 0xaf224ae2, 0x9d139927, 0xe6909b29, 0xa25b7f47, 0x2aa224ce, 0x79f2 uint32_t value .. parsed-literal:: e = 272 uint16_t value .. parsed-literal:: k = 40 uint16_t value .. parsed-literal:: ncb = 192 uint8_t value .. parsed-literal:: rv_index = 0 Chain of flags for turbo encoder operation. Following flags can be used: - ``RTE_BBDEV_TURBO_RV_INDEX_BYPASS`` - ``RTE_BBDEV_TURBO_RATE_MATCH`` - ``RTE_BBDEV_TURBO_CRC_24B_ATTACH`` - ``RTE_BBDEV_TURBO_CRC_24A_ATTACH`` - ``RTE_BBDEV_TURBO_ENC_SCATTER_GATHER`` ``RTE_BBDEV_TURBO_ENC_SCATTER_GATHER`` is used to indicate the parser to force the input data to be memory split and formed as a segmented mbuf. .. parsed-literal:: op_flags = RTE_BBDEV_TURBO_RATE_MATCH Chain of operation statuses that are expected after operation is performed. Following statuses can be used: - ``DMA`` - ``FCW`` - ``OK`` ``OK`` means no errors are expected. Cannot be used with other values. .. parsed-literal:: expected_status = OK