ABI and API Deprecation ======================= See the :doc:`guidelines document for details of the ABI policy `. API and ABI deprecation notices are to be posted here. Deprecation Notices ------------------- * eal: both declaring and identifying devices will be streamlined in v18.05. New functions will appear to query a specific port from buses, classes of device and device drivers. Device declaration will be made coherent with the new scheme of device identification. As such, ``rte_devargs`` device representation will change. - removal of ``name`` and ``args`` fields. - The enum ``rte_devtype`` was used to identify a bus and will disappear. - The ``rte_devargs_list`` will be made private. - Functions previously deprecated will change or disappear: + ``rte_eal_devargs_add`` + ``rte_eal_devargs_type_count`` + ``rte_eal_parse_devargs_str``, replaced by ``rte_eal_devargs_parse`` + ``rte_eal_devargs_parse`` will change its format and use. + all ``rte_devargs`` related functions will be renamed, changing the ``rte_eal_devargs_`` prefix to ``rte_devargs_``. * pci: Several exposed functions are misnamed. The following functions are deprecated starting from v17.11 and are replaced: - ``eal_parse_pci_BDF`` replaced by ``rte_pci_addr_parse`` - ``eal_parse_pci_DomBDF`` replaced by ``rte_pci_addr_parse`` - ``rte_eal_compare_pci_addr`` replaced by ``rte_pci_addr_cmp`` * eal: The semantics of the return value for the ``rte_lcore_has_role`` function are planned to change in v18.05. The function currently returns 0 and <0 for success and failure, respectively. This will change to 1 and 0 for true and false, respectively, to make use of the function more intuitive. * eal: new ``numa_node_count`` member will be added to ``rte_config`` structure in v18.05. * eal: due to internal data layout reorganization, there will be changes to several structures and functions as a result of coming changes to support memory hotplug in v18.05. ``rte_eal_get_physmem_layout`` will be deprecated and removed in subsequent releases. ``rte_mem_config`` contents will change due to switch to memseg lists. ``rte_memzone`` member ``memseg_id`` will no longer serve any useful purpose and will be removed. * eal: a new set of mbuf mempool ops name APIs for user, platform and best mempool names have been defined in ``rte_mbuf`` in v18.02. The uses of ``rte_eal_mbuf_default_mempool_ops`` shall be replaced by ``rte_mbuf_best_mempool_ops``. The following function is now redundant and it is target to be deprecated in 18.05: - ``rte_eal_mbuf_default_mempool_ops`` * mempool: several API and ABI changes are planned in v18.05. The following functions, introduced for Xen, which is not supported anymore since v17.11, are hard to use, not used anywhere else in DPDK. Therefore they will be deprecated in v18.05 and removed in v18.08: - ``rte_mempool_xmem_create`` - ``rte_mempool_xmem_size`` - ``rte_mempool_xmem_usage`` The following changes are planned: - removal of ``get_capabilities`` mempool ops and related flags. - substitute ``register_memory_area`` with ``populate`` ops. - addition of new ops to customize required memory chunk calculation, customize objects population and allocate contiguous block of objects if underlying driver supports it. * mbuf: The control mbuf API will be removed in v18.05. The impacted functions and macros are: - ``rte_ctrlmbuf_init()`` - ``rte_ctrlmbuf_alloc()`` - ``rte_ctrlmbuf_free()`` - ``rte_ctrlmbuf_data()`` - ``rte_ctrlmbuf_len()`` - ``rte_is_ctrlmbuf()`` - ``CTRL_MBUF_FLAG`` The packet mbuf API should be used as a replacement. * mbuf: The opaque ``mbuf->hash.sched`` field will be updated to support generic definition in line with the ethdev TM and MTR APIs. Currently, this field is defined in librte_sched in a non-generic way. The new generic format will contain: queue ID, traffic class, color. Field size will not change. * ethdev: a new Tx and Rx offload API was introduced on 17.11. In the new API, offloads are divided into per-port and per-queue offloads. Offloads are disabled by default and enabled per application request. The old ethdev - drivers offload interface will be deprecated on 18.05. This includes: - removal of the conversion in ethdev from new offloading API to old API for drivers. In later releases the old offloading API will be deprecated, which will include: - removal of ``ETH_TXQ_FLAGS_NO*`` flags. - removal of ``txq_flags`` field from ``rte_eth_txconf`` struct. - removal of the offloads bit-field from ``rte_eth_rxmode`` struct. * ethdev: the legacy filter API, including ``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well as filter types MACVLAN, ETHERTYPE, FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR, HASH and L2_TUNNEL, is superseded by the generic flow API (rte_flow) in PMDs that implement the latter. Target release for removal of the legacy API will be defined once most PMDs have switched to rte_flow. * ethdev: A new rss level field planned in 18.05. The new API add rss_level field to ``rte_eth_rss_conf`` to enable a choice of RSS hash calculation on outer or inner header of tunneled packet. * ethdev: Currently, if the rte_eth_rx_burst() function returns a value less than *nb_pkts*, the application will assume that no more packets are present. Some of the hw queue based hardware can only support smaller burst for RX and TX and thus break the expectation of the rx_burst API. Similar is the case for TX burst as well as ring sizes. ``rte_eth_dev_info`` will be added with following new parameters so as to support semantics for drivers to define a preferred size for Rx/Tx burst and rings. - Member ``struct preferred_size`` would be added to enclose all preferred size to be fetched from driver/implementation. - Members ``uint16_t rx_burst``, ``uint16_t tx_burst``, ``uint16_t rx_ring``, and ``uint16_t tx_ring`` would be added to ``struct preferred_size``. * ethdev: A work is being planned for 18.05 to expose VF port representors as a mean to perform control and data path operation on the different VFs. As VF representor is an ethdev port, new fields are needed in order to map between the VF representor and the VF or the parent PF. Those new fields are to be included in ``rte_eth_dev_info`` struct. * ethdev: The prototype and the behavior of ``dev_ops->eth_mac_addr_set()`` will change in v18.05. A return code will be added to notify the caller if an error occurred in the PMD. In ``rte_eth_dev_default_mac_addr_set()``, the new default MAC address will be copied in ``dev->data->mac_addrs[0]`` only if the operation is successful. This modification will only impact the PMDs, not the applications. * ethdev: functions add rx/tx callback will return named opaque type ``rte_eth_add_rx_callback()``, ``rte_eth_add_first_rx_callback()`` and ``rte_eth_add_tx_callback()`` functions currently return callback object as ``void \*`` but APIs to delete callbacks get ``struct rte_eth_rxtx_callback \*`` as parameter. For consistency functions adding callback will return ``struct rte_eth_rxtx_callback \*`` instead of ``void \*``. * ethdev: The size of variables ``flow_types_mask`` in ``rte_eth_fdir_info structure``, ``sym_hash_enable_mask`` and ``valid_bit_mask`` in ``rte_eth_hash_global_conf`` structure will be increased from 32 to 64 bits to fulfill hardware requirements. This change will break existing ABI as size of the structures will increase. * ethdev: ``rte_eth_dev_get_sec_ctx()`` fix port id storage ``rte_eth_dev_get_sec_ctx()`` is using ``uint8_t`` for ``port_id``, which should be ``uint16_t``. * i40e: The default flexible payload configuration which extracts the first 16 bytes of the payload for RSS will be deprecated starting from 18.02. If required the previous behavior can be configured using existing flow director APIs. There is no ABI/API break. This change will just remove a global configuration setting and require explicit configuration. * librte_meter: The API will change to accommodate configuration profiles. Most of the API functions will have an additional opaque parameter. * ring: The alignment constraints on the ring structure will be relaxed to one cache line instead of two, and an empty cache line padding will be added between the producer and consumer structures. The size of the structure and the offset of the fields will remain the same on platforms with 64B cache line, but will change on other platforms.