.. BSD LICENSE Copyright (C) Cavium, Inc. 2017. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Cavium, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. OCTEONTX SSOVF Eventdev Driver ============================== The OCTEONTX SSOVF PMD (**librte_pmd_octeontx_ssovf**) provides poll mode eventdev driver support for the inbuilt event device found in the **Cavium OCTEONTX** SoC family as well as their virtual functions (VF) in SR-IOV context. More information can be found at `Cavium, Inc Official Website `_. Features -------- Features of the OCTEONTX SSOVF PMD are: - 64 Event queues - 32 Event ports - HW event scheduler - Supports 1M flows per event queue - Flow based event pipelining - Flow pinning support in flow based event pipelining - Queue based event pipelining - Supports ATOMIC, ORDERED, PARALLEL schedule types per flow - Event scheduling QoS based on event queue priority - Open system with configurable amount of outstanding events - HW accelerated dequeue timeout support to enable power management - SR-IOV VF Supported OCTEONTX SoCs ----------------------- - CN83xx Prerequisites ------------- There are three main pre-perquisites for executing SSOVF PMD on a OCTEONTX compatible board: 1. **OCTEONTX Linux kernel PF driver for Network acceleration HW blocks** The OCTEONTX Linux kernel drivers (including the required PF driver for the SSOVF) are available on Github at `octeontx-kmod `_ along with build, install and dpdk usage instructions. 2. **ARM64 Tool Chain** For example, the *aarch64* Linaro Toolchain, which can be obtained from `here `_. 3. **Rootfile system** Any *aarch64* supporting filesystem can be used. For example, Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained from ``_. As an alternative method, SSOVF PMD can also be executed using images provided as part of SDK from Cavium. The SDK includes all the above prerequisites necessary to bring up a OCTEONTX board. SDK and related information can be obtained from: `Cavium support site `_. - Follow the DPDK :ref:`Getting Started Guide for Linux ` to setup the basic DPDK environment. Pre-Installation Configuration ------------------------------ Config File Options ~~~~~~~~~~~~~~~~~~~ The following options can be modified in the ``config`` file. Please note that enabling debugging options may affect system performance. - ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF`` (default ``y``) Toggle compilation of the ``librte_pmd_octeontx_ssovf`` driver. - ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF_DEBUG`` (default ``n``) Toggle display of generic debugging messages Driver Compilation ~~~~~~~~~~~~~~~~~~ To compile the OCTEONTX SSOVF PMD for Linux arm64 gcc target, run the following ``make`` command: .. code-block:: console cd make config T=arm64-thunderx-linuxapp-gcc install Initialization -------------- The octeontx eventdev is exposed as a vdev device which consists of a set of SSO group and work-slot PCIe VF devices. On EAL initialization, SSO PCIe VF devices will be probed and then the vdev device can be created from the application code, or from the EAL command line based on the number of probed/bound SSO PCIe VF device to DPDK by * Invoking ``rte_vdev_init("event_octeontx")`` from the application * Using ``--vdev="event_octeontx"`` in the EAL options, which will call rte_vdev_init() internally Example: .. code-block:: console ./your_eventdev_application --vdev="event_octeontx" Limitations ----------- Burst mode support ~~~~~~~~~~~~~~~~~~ Burst mode is not supported. Dequeue and Enqueue functions accepts only single event at a time.