Managing ABI updates ==================== Description ----------- This document details some methods for handling ABI management in the DPDK. Note this document is not exhaustive, in that C library versioning is flexible allowing multiple methods to achieve various goals, but it will provide the user with some introductory methods General Guidelines ------------------ #. Whenever possible, ABI should be preserved #. The libraries marked in experimental state may change without constraint. #. The addition of symbols is generally not problematic #. The modification of symbols can generally be managed with versioning #. The removal of symbols generally is an ABI break and requires bumping of the LIBABIVER macro What is an ABI -------------- An ABI (Application Binary Interface) is the set of runtime interfaces exposed by a library. It is similar to an API (Application Programming Interface) but is the result of compilation. It is also effectively cloned when applications link to dynamic libraries. That is to say when an application is compiled to link against dynamic libraries, it is assumed that the ABI remains constant between the time the application is compiled/linked, and the time that it runs. Therefore, in the case of dynamic linking, it is critical that an ABI is preserved, or (when modified), done in such a way that the application is unable to behave improperly or in an unexpected fashion. The DPDK ABI policy ------------------- ABI versions are set at the time of major release labeling, and the ABI may change multiple times, without warning, between the last release label and the HEAD label of the git tree. ABI versions, once released, are available until such time as their deprecation has been noted in the Release Notes for at least one major release cycle. For example consider the case where the ABI for DPDK 2.0 has been shipped and then a decision is made to modify it during the development of DPDK 2.1. The decision will be recorded in the Release Notes for the DPDK 2.1 release and the modification will be made available in the DPDK 2.2 release. ABI versions may be deprecated in whole or in part as needed by a given update. Some ABI changes may be too significant to reasonably maintain multiple versions. In those cases ABI's may be updated without backward compatibility being provided. The requirements for doing so are: #. At least 3 acknowledgments of the need to do so must be made on the dpdk.org mailing list. #. The changes (including an alternative map file) must be gated with the ``RTE_NEXT_ABI`` option, and provided with a deprecation notice at the same time. It will become the default ABI in the next release. #. A full deprecation cycle, as explained above, must be made to offer downstream consumers sufficient warning of the change. #. At the beginning of the next release cycle, every ``RTE_NEXT_ABI`` conditions will be removed, the ``LIBABIVER`` variable in the makefile(s) where the ABI is changed will be incremented, and the map files will be updated. Note that the above process for ABI deprecation should not be undertaken lightly. ABI stability is extremely important for downstream consumers of the DPDK, especially when distributed in shared object form. Every effort should be made to preserve the ABI whenever possible. The ABI should only be changed for significant reasons, such as performance enhancements. ABI breakage due to changes such as reorganizing public structure fields for aesthetic or readability purposes should be avoided. Examples of Deprecation Notices ------------------------------- The following are some examples of ABI deprecation notices which would be added to the Release Notes: * The Macro ``#RTE_FOO`` is deprecated and will be removed with version 2.0, to be replaced with the inline function ``rte_foo()``. * The function ``rte_mbuf_grok()`` has been updated to include a new parameter in version 2.0. Backwards compatibility will be maintained for this function until the release of version 2.1 * The members of ``struct rte_foo`` have been reorganized in release 2.0 for performance reasons. Existing binary applications will have backwards compatibility in release 2.0, while newly built binaries will need to reference the new structure variant ``struct rte_foo2``. Compatibility will be removed in release 2.2, and all applications will require updating and rebuilding to the new structure at that time, which will be renamed to the original ``struct rte_foo``. * Significant ABI changes are planned for the ``librte_dostuff`` library. The upcoming release 2.0 will not contain these changes, but release 2.1 will, and no backwards compatibility is planned due to the extensive nature of these changes. Binaries using this library built prior to version 2.1 will require updating and recompilation. Versioning Macros ----------------- When a symbol is exported from a library to provide an API, it also provides a calling convention (ABI) that is embodied in its name, return type and arguments. Occasionally that function may need to change to accommodate new functionality or behavior. When that occurs, it is desirable to allow for backward compatibility for a time with older binaries that are dynamically linked to the DPDK. To support backward compatibility the ``lib/librte_compat/rte_compat.h`` header file provides macros to use when updating exported functions. These macros are used in conjunction with the ``rte__version.map`` file for a given library to allow multiple versions of a symbol to exist in a shared library so that older binaries need not be immediately recompiled. The macros exported are: * ``VERSION_SYMBOL(b, e, n)``: Creates a symbol version table entry binding versioned symbol ``b@DPDK_n`` to the internal function ``b_e``. * ``BIND_DEFAULT_SYMBOL(b, e, n)``: Creates a symbol version entry instructing the linker to bind references to symbol ``b`` to the internal symbol ``b_e``. * ``MAP_STATIC_SYMBOL(f, p)``: Declare the prototype ``f``, and map it to the fully qualified function ``p``, so that if a symbol becomes versioned, it can still be mapped back to the public symbol name. Setting a Major ABI version --------------------------- Downstreams might want to provide different DPDK releases at the same time to support multiple consumers of DPDK linked against older and newer sonames. Also due to the interdependencies that DPDK libraries can have applications might end up with an executable space in which multiple versions of a library are mapped by ld.so. Think of LibA that got an ABI bump and LibB that did not get an ABI bump but is depending on LibA. .. note:: Application \-> LibA.old \-> LibB.new -> LibA.new That is a conflict which can be avoided by setting ``CONFIG_RTE_MAJOR_ABI``. If set, the value of ``CONFIG_RTE_MAJOR_ABI`` overwrites all - otherwise per library - versions defined in the libraries ``LIBABIVER``. An example might be ``CONFIG_RTE_MAJOR_ABI=16.11`` which will make all libraries ``librte.so.16.11`` instead of ``librte.so.``. Examples of ABI Macro use ------------------------- Updating a public API ~~~~~~~~~~~~~~~~~~~~~ Assume we have a function as follows .. code-block:: c /* * Create an acl context object for apps to * manipulate */ struct rte_acl_ctx * rte_acl_create(const struct rte_acl_param *param) { ... } Assume that struct rte_acl_ctx is a private structure, and that a developer wishes to enhance the acl api so that a debugging flag can be enabled on a per-context basis. This requires an addition to the structure (which, being private, is safe), but it also requires modifying the code as follows .. code-block:: c /* * Create an acl context object for apps to * manipulate */ struct rte_acl_ctx * rte_acl_create(const struct rte_acl_param *param, int debug) { ... } Note also that, being a public function, the header file prototype must also be changed, as must all the call sites, to reflect the new ABI footprint. We will maintain previous ABI versions that are accessible only to previously compiled binaries The addition of a parameter to the function is ABI breaking as the function is public, and existing application may use it in its current form. However, the compatibility macros in DPDK allow a developer to use symbol versioning so that multiple functions can be mapped to the same public symbol based on when an application was linked to it. To see how this is done, we start with the requisite libraries version map file. Initially the version map file for the acl library looks like this .. code-block:: none DPDK_2.0 { global: rte_acl_add_rules; rte_acl_build; rte_acl_classify; rte_acl_classify_alg; rte_acl_classify_scalar; rte_acl_create; rte_acl_dump; rte_acl_find_existing; rte_acl_free; rte_acl_ipv4vlan_add_rules; rte_acl_ipv4vlan_build; rte_acl_list_dump; rte_acl_reset; rte_acl_reset_rules; rte_acl_set_ctx_classify; local: *; }; This file needs to be modified as follows .. code-block:: none DPDK_2.0 { global: rte_acl_add_rules; rte_acl_build; rte_acl_classify; rte_acl_classify_alg; rte_acl_classify_scalar; rte_acl_create; rte_acl_dump; rte_acl_find_existing; rte_acl_free; rte_acl_ipv4vlan_add_rules; rte_acl_ipv4vlan_build; rte_acl_list_dump; rte_acl_reset; rte_acl_reset_rules; rte_acl_set_ctx_classify; local: *; }; DPDK_2.1 { global: rte_acl_create; } DPDK_2.0; The addition of the new block tells the linker that a new version node is available (DPDK_2.1), which contains the symbol rte_acl_create, and inherits the symbols from the DPDK_2.0 node. This list is directly translated into a list of exported symbols when DPDK is compiled as a shared library Next, we need to specify in the code which function map to the rte_acl_create symbol at which versions. First, at the site of the initial symbol definition, we need to update the function so that it is uniquely named, and not in conflict with the public symbol name .. code-block:: c struct rte_acl_ctx * -rte_acl_create(const struct rte_acl_param *param) +rte_acl_create_v20(const struct rte_acl_param *param) { size_t sz; struct rte_acl_ctx *ctx; ... Note that the base name of the symbol was kept intact, as this is conducive to the macros used for versioning symbols. That is our next step, mapping this new symbol name to the initial symbol name at version node 2.0. Immediately after the function, we add this line of code .. code-block:: c VERSION_SYMBOL(rte_acl_create, _v20, 2.0); Remembering to also add the rte_compat.h header to the requisite c file where these changes are being made. The above macro instructs the linker to create a new symbol ``rte_acl_create@DPDK_2.0``, which matches the symbol created in older builds, but now points to the above newly named function. We have now mapped the original rte_acl_create symbol to the original function (but with a new name) Next, we need to create the 2.1 version of the symbol. We create a new function name, with a different suffix, and implement it appropriately .. code-block:: c struct rte_acl_ctx * rte_acl_create_v21(const struct rte_acl_param *param, int debug); { struct rte_acl_ctx *ctx = rte_acl_create_v20(param); ctx->debug = debug; return ctx; } This code serves as our new API call. Its the same as our old call, but adds the new parameter in place. Next we need to map this function to the symbol ``rte_acl_create@DPDK_2.1``. To do this, we modify the public prototype of the call in the header file, adding the macro there to inform all including applications, that on re-link, the default rte_acl_create symbol should point to this function. Note that we could do this by simply naming the function above rte_acl_create, and the linker would chose the most recent version tag to apply in the version script, but we can also do this in the header file .. code-block:: c struct rte_acl_ctx * -rte_acl_create(const struct rte_acl_param *param); +rte_acl_create(const struct rte_acl_param *param, int debug); +BIND_DEFAULT_SYMBOL(rte_acl_create, _v21, 2.1); The BIND_DEFAULT_SYMBOL macro explicitly tells applications that include this header, to link to the rte_acl_create_v21 function and apply the DPDK_2.1 version node to it. This method is more explicit and flexible than just re-implementing the exact symbol name, and allows for other features (such as linking to the old symbol version by default, when the new ABI is to be opt-in for a period. One last thing we need to do. Note that we've taken what was a public symbol, and duplicated it into two uniquely and differently named symbols. We've then mapped each of those back to the public symbol ``rte_acl_create`` with different version tags. This only applies to dynamic linking, as static linking has no notion of versioning. That leaves this code in a position of no longer having a symbol simply named ``rte_acl_create`` and a static build will fail on that missing symbol. To correct this, we can simply map a function of our choosing back to the public symbol in the static build with the ``MAP_STATIC_SYMBOL`` macro. Generally the assumption is that the most recent version of the symbol is the one you want to map. So, back in the C file where, immediately after ``rte_acl_create_v21`` is defined, we add this .. code-block:: c struct rte_acl_ctx * rte_acl_create_v21(const struct rte_acl_param *param, int debug) { ... } MAP_STATIC_SYMBOL(struct rte_acl_ctx *rte_acl_create(const struct rte_acl_param *param, int debug), rte_acl_create_v21); That tells the compiler that, when building a static library, any calls to the symbol ``rte_acl_create`` should be linked to ``rte_acl_create_v21`` That's it, on the next shared library rebuild, there will be two versions of rte_acl_create, an old DPDK_2.0 version, used by previously built applications, and a new DPDK_2.1 version, used by future built applications. Deprecating part of a public API ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Lets assume that you've done the above update, and after a few releases have passed you decide you would like to retire the old version of the function. After having gone through the ABI deprecation announcement process, removal is easy. Start by removing the symbol from the requisite version map file: .. code-block:: none DPDK_2.0 { global: rte_acl_add_rules; rte_acl_build; rte_acl_classify; rte_acl_classify_alg; rte_acl_classify_scalar; rte_acl_dump; - rte_acl_create rte_acl_find_existing; rte_acl_free; rte_acl_ipv4vlan_add_rules; rte_acl_ipv4vlan_build; rte_acl_list_dump; rte_acl_reset; rte_acl_reset_rules; rte_acl_set_ctx_classify; local: *; }; DPDK_2.1 { global: rte_acl_create; } DPDK_2.0; Next remove the corresponding versioned export. .. code-block:: c -VERSION_SYMBOL(rte_acl_create, _v20, 2.0); Note that the internal function definition could also be removed, but its used in our example by the newer version _v21, so we leave it in place. This is a coding style choice. Lastly, we need to bump the LIBABIVER number for this library in the Makefile to indicate to applications doing dynamic linking that this is a later, and possibly incompatible library version: .. code-block:: c -LIBABIVER := 1 +LIBABIVER := 2 Deprecating an entire ABI version ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ While removing a symbol from and ABI may be useful, it is often more practical to remove an entire version node at once. If a version node completely specifies an API, then removing part of it, typically makes it incomplete. In those cases it is better to remove the entire node To do this, start by modifying the version map file, such that all symbols from the node to be removed are merged into the next node in the map In the case of our map above, it would transform to look as follows .. code-block:: none DPDK_2.1 { global: rte_acl_add_rules; rte_acl_build; rte_acl_classify; rte_acl_classify_alg; rte_acl_classify_scalar; rte_acl_dump; rte_acl_create rte_acl_find_existing; rte_acl_free; rte_acl_ipv4vlan_add_rules; rte_acl_ipv4vlan_build; rte_acl_list_dump; rte_acl_reset; rte_acl_reset_rules; rte_acl_set_ctx_classify; local: *; }; Then any uses of BIND_DEFAULT_SYMBOL that pointed to the old node should be updated to point to the new version node in any header files for all affected symbols. .. code-block:: c -BIND_DEFAULT_SYMBOL(rte_acl_create, _v20, 2.0); +BIND_DEFAULT_SYMBOL(rte_acl_create, _v21, 2.1); Lastly, any VERSION_SYMBOL macros that point to the old version node should be removed, taking care to keep, where need old code in place to support newer versions of the symbol. Running the ABI Validator ------------------------- The ``devtools`` directory in the DPDK source tree contains a utility program, ``validate-abi.sh``, for validating the DPDK ABI based on the Linux `ABI Compliance Checker `_. This has a dependency on the ``abi-compliance-checker`` and ``and abi-dumper`` utilities which can be installed via a package manager. For example:: sudo yum install abi-compliance-checker sudo yum install abi-dumper The syntax of the ``validate-abi.sh`` utility is:: ./devtools/validate-abi.sh Where ``REV1`` and ``REV2`` are valid gitrevisions(7) https://www.kernel.org/pub/software/scm/git/docs/gitrevisions.html on the local repo and target is the usual DPDK compilation target. For example:: # Check between the previous and latest commit: ./devtools/validate-abi.sh HEAD~1 HEAD x86_64-native-linuxapp-gcc # Check between two tags: ./devtools/validate-abi.sh v2.0.0 v2.1.0 x86_64-native-linuxapp-gcc # Check between git master and local topic-branch "vhost-hacking": ./devtools/validate-abi.sh master vhost-hacking x86_64-native-linuxapp-gcc After the validation script completes (it can take a while since it need to compile both tags) it will create compatibility reports in the ``./compat_report`` directory. Listed incompatibilities can be found as follows:: grep -lr Incompatible compat_reports/