2. DPDK Release 16.07

2.1. New Features

  • Removed the mempool cache memory if caching is not being used.

    The size of the mempool structure is reduced if the per-lcore cache is disabled.

  • Added mempool external cache for non-EAL thread.

    Added new functions to create, free or flush a user-owned mempool cache for non-EAL threads. Previously the caching was always disabled on these threads.

  • Changed the memory allocation scheme in the mempool library.

    • Added the ability to allocate a large mempool in fragmented virtual memory.
    • Added new APIs to populate a mempool with memory.
    • Added an API to free a mempool.
    • Modified the API of the rte_mempool_obj_iter() function.
    • Dropped the specific Xen Dom0 code.
    • Dropped the specific anonymous mempool code in testpmd.
  • Added a new driver for Broadcom NetXtreme-C devices.

    Added the new bnxt driver for Broadcom NetXtreme-C devices. See the “Network Interface Controller Drivers” document for more details on this new driver.

  • Added a new driver for ThunderX nicvf devices.

    Added the new thunderx net driver for ThunderX nicvf devices. See the “Network Interface Controller Drivers” document for more details on this new driver.

  • Added mailbox interrupt support for ixgbe and igb VFs.

    When the physical NIC link comes up or down, the PF driver will send a mailbox message to notify each VF. To handle this link up/down event, support have been added for a mailbox interrupt to receive the message and allow the application to register a callback for it.

  • Updated the ixgbe base driver.

    The ixgbe base driver was updated with changes including the following:

    • Added sgmii link for X550.
    • Added MAC link setup for X550a SFP and SFP+.
    • Added KR support for X550em_a.
    • Added new PHY definitions for M88E1500.
    • Added support for the VLVF to be bypassed when adding/removing a VFTA entry.
    • Added X550a flow control auto negotiation support.
  • Updated the i40e base driver.

    Updated the i40e base driver including support for new devices IDs.

  • Updated the enic driver.

    The enic driver was updated with changes including the following:

    • Optimized the Tx function.
    • Added Scattered Rx capability.
    • Improved packet type identification.
    • Added MTU update in non Scattered Rx mode and enabled MTU of up to 9208 with UCS Software release 2.2 on 1300 series VICs.
  • Updated the mlx5 driver.

    The mlx5 driver was updated with changes including the following:

    • Data path was refactored to bypass Verbs to improve RX and TX performance.
    • Removed compilation parameters for inline send, MLX5_MAX_INLINE, and added command line parameter instead, txq_inline.
    • Improved TX scatter gather support: Removed compilation parameter MLX5_PMD_SGE_WR_N. Scatter-gather elements is set to the maximum value the NIC supports. Removed linearization logic, this decreases the memory consumption of the PMD.
    • Improved jumbo frames support, by dynamically setting RX scatter gather elements according to the MTU and mbuf size, no need for compilation parameter MLX5_PMD_SGE_WR_N
  • Added support for virtio on IBM POWER8.

    The ioports are mapped in memory when using Linux UIO.

  • Added support for Virtio in containers.

    Add a new virtual device, named virtio_user, to support virtio for containers.

    Known limitations:

    • Control queue and multi-queue are not supported yet.
    • Doesn’t work with --huge-unlink.
    • Doesn’t work with --no-huge.
    • Doesn’t work when there are more than VHOST_MEMORY_MAX_NREGIONS(8) hugepages.
    • Root privilege is required for sorting hugepages by physical address.
    • Can only be used with the vhost user backend.
  • Added vhost-user client mode.

    DPDK vhost-user now supports client mode as well as server mode. Client mode is enabled when the RTE_VHOST_USER_CLIENT flag is set while calling rte_vhost_driver_register.

    When DPDK vhost-user restarts from an normal or abnormal exit (such as a crash), the client mode allows DPDK to establish the connection again. Note that QEMU version v2.7 or above is required for this feature.

    DPDK vhost-user will also try to reconnect by default when:

    • The first connect fails (for example when QEMU is not started yet).
    • The connection is broken (for example when QEMU restarts).

    It can be turned off by setting the RTE_VHOST_USER_NO_RECONNECT flag.

  • Added NSH packet recognition in i40e.

  • Added AES-CTR support to AESNI MB PMD.

    Now AESNI MB PMD supports 128/192/256-bit counter mode AES encryption and decryption.

  • Added AES counter mode support for Intel QuickAssist devices.

    Enabled support for the AES CTR algorithm for Intel QuickAssist devices. Provided support for algorithm-chaining operations.

  • Added KASUMI SW PMD.

    A new Crypto PMD has been added, which provides KASUMI F8 (UEA1) ciphering and KASUMI F9 (UIA1) hashing.

  • Added multi-writer support for RTE Hash with Intel TSX.

    The following features/modifications have been added to rte_hash library:

    • Enabled application developers to use an extra flag for rte_hash creation to specify default behavior (multi-thread safe/unsafe) with the rte_hash_add_key function.
    • Changed the Cuckoo Hash Search algorithm to breadth first search for multi-writer routines and split Cuckoo Hash Search and Move operations in order to reduce transactional code region and improve TSX performance.
    • Added a hash multi-writer test case to the test app.
  • Improved IP Pipeline Application.

    The following features have been added to the ip_pipeline application:

    • Configure the MAC address in the routing pipeline and automatic route updates with change in link state.
    • Enable RSS per network interface through the configuration file.
    • Streamline the CLI code.
  • Added keepalive enhancements.

    Added support for reporting of core states other than “dead” to monitoring applications, enabling the support of broader liveness reporting to external processes.

  • Added packet capture framework.

    • A new library librte_pdump is added to provide a packet capture API.
    • A new app/pdump tool is added to demonstrate capture packets in DPDK.
  • Added floating VEB support for i40e PF driver.

    A “floating VEB” is a special Virtual Ethernet Bridge (VEB) which does not have an upload port, but instead is used for switching traffic between virtual functions (VFs) on a port.

    For information on this feature, please see the “I40E Poll Mode Driver” section of the “Network Interface Controller Drivers” document.

  • Added support for live migration of a VM with SRIOV VF.

    Live migration of a VM with Virtio and VF PMD’s using the bonding PMD.

2.2. Resolved Issues

2.2.1. EAL

  • igb_uio: Fixed possible mmap failure for Linux >= 4.5.

    The mmaping of the iomem range of the PCI device fails for kernels that enabled the CONFIG_IO_STRICT_DEVMEM option. The error seen by the user is as similar to the following:

    EAL: pci_map_resource():
    
        cannot mmap(39, 0x7f1c51800000, 0x100000, 0x0):
        Invalid argument (0xffffffffffffffff)
    

    The CONFIG_IO_STRICT_DEVMEM kernel option was introduced in Linux v4.5.

    The issues was resolve by updating igb_uio to stop reserving PCI memory resources. From the kernel point of view the iomem region looks like idle and mmap works again. This matches the uio_pci_generic usage.

2.2.2. Drivers

  • i40e: Fixed vlan stripping from inner header.

    Previously, for tunnel packets, such as VXLAN/NVGRE, the vlan tags of the inner header will be stripped without putting vlan info to descriptor. Now this issue is fixed by disabling vlan stripping from inner header.

  • i40e: Fixed the type issue of a single VLAN type.

    Currently, if a single VLAN header is added in a packet, it’s treated as inner VLAN. But generally, a single VLAN header is treated as the outer VLAN header. This issue is fixed by changing corresponding register for single VLAN.

  • enic: Fixed several issues when stopping then restarting ports and queues.

    Fixed several crashes related to stopping then restarting ports and queues. Fixed possible crash when re-configuring the number of Rx queue descriptors.

  • enic: Fixed Rx data mis-alignment if mbuf data offset modified.

    Fixed possible Rx corruption when mbufs were returned to a pool with data offset other than RTE_PKTMBUF_HEADROOM.

  • enic: Fixed Tx IP/UDP/TCP checksum offload and VLAN insertion.

  • enic: Fixed Rx error and missed counters.

2.2.3. Libraries

  • mbuf: Fixed refcnt update when detaching.

    Fix the rte_pktmbuf_detach() function to decrement the direct mbuf’s reference counter. The previous behavior was not to affect the reference counter. This lead to a memory leak of the direct mbuf.

2.2.4. Examples

2.2.5. Other

2.3. Known Issues

2.4. API Changes

  • The following counters are removed from the rte_eth_stats structure:
    • ibadcrc
    • ibadlen
    • imcasts
    • fdirmatch
    • fdirmiss
    • tx_pause_xon
    • rx_pause_xon
    • tx_pause_xoff
    • rx_pause_xoff
  • The extended statistics are fetched by ids with rte_eth_xstats_get after a lookup by name rte_eth_xstats_get_names.
  • The function rte_eth_dev_info_get fill the new fields nb_rx_queues and nb_tx_queues in the structure rte_eth_dev_info.
  • The vhost function rte_vring_available_entries is renamed to rte_vhost_avail_entries.
  • All existing vhost APIs and callbacks with virtio_net struct pointer as the parameter have been changed due to the ABI refactoring described below. It is replaced by int vid.
  • The function rte_vhost_enqueue_burst no longer supports concurrent enqueuing packets to the same queue.
  • The function rte_eth_dev_set_mtu adds a new return value -EBUSY, which indicates the operation is forbidden because the port is running.
  • The script dpdk_nic_bind.py is renamed to dpdk-devbind.py. And the script setup.sh is renamed to dpdk-setup.sh.

2.5. ABI Changes

  • The rte_port_source_params structure has new fields to support PCAP files. It was already in release 16.04 with RTE_NEXT_ABI flag.
  • The rte_eth_dev_info structure has new fields nb_rx_queues and nb_tx_queues to support the number of queues configured by software.
  • A Vhost ABI refactoring has been made: the virtio_net structure is no longer exported directly to the application. Instead, a handle, vid, has been used to represent this structure internally.

2.6. Shared Library Versions

The libraries prepended with a plus sign were incremented in this version.

+ libethdev.so.4
  librte_acl.so.2
  librte_cfgfile.so.2
  librte_cmdline.so.2
  librte_cryptodev.so.1
  librte_distributor.so.1
  librte_eal.so.2
  librte_hash.so.2
  librte_ip_frag.so.1
  librte_ivshmem.so.1
  librte_jobstats.so.1
  librte_kni.so.2
  librte_kvargs.so.1
  librte_lpm.so.2
  librte_mbuf.so.2
+ librte_mempool.so.2
  librte_meter.so.1
  librte_pdump.so.1
  librte_pipeline.so.3
  librte_pmd_bond.so.1
  librte_pmd_ring.so.2
+ librte_port.so.3
  librte_power.so.1
  librte_reorder.so.1
  librte_ring.so.1
  librte_sched.so.1
  librte_table.so.2
  librte_timer.so.1
+ librte_vhost.so.3

2.7. Tested Platforms

  1. SuperMicro 1U
    • BIOS: 1.0c
    • Processor: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz
  2. SuperMicro 1U
    • BIOS: 1.0a
    • Processor: Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz
    • Onboard NIC: Intel(R) X552/X557-AT (2x10G)
      • Firmware-version: 0x800001cf
      • Device ID (PF/VF): 8086:15ad /8086:15a8
    • kernel driver version: 4.2.5 (ixgbe)
  3. SuperMicro 2U
    • BIOS: 1.0a
    • Processor: Intel(R) Xeon(R) CPU E5-4667 v3 @ 2.00GHz
  4. Intel(R) Server board S2600GZ
    • BIOS: SE5C600.86B.02.02.0002.122320131210
    • Processor: Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
  5. Intel(R) Server board W2600CR
    • BIOS: SE5C600.86B.02.01.0002.082220131453
    • Processor: Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
  6. Intel(R) Server board S2600CWT
    • BIOS: SE5C610.86B.01.01.0009.060120151350
    • Processor: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
  7. Intel(R) Server board S2600WTT
    • BIOS: SE5C610.86B.01.01.0005.101720141054
    • Processor: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
  8. Intel(R) Server board S2600WTT
    • BIOS: SE5C610.86B.11.01.0044.090120151156
    • Processor: Intel(R) Xeon(R) CPU E5-2695 v4 @ 2.10GHz

2.8. Tested NICs

  1. Intel(R) Ethernet Controller X540-AT2
    • Firmware version: 0x80000389
    • Device id (pf): 8086:1528
    • Driver version: 3.23.2 (ixgbe)
  2. Intel(R) 82599ES 10 Gigabit Ethernet Controller
    • Firmware version: 0x61bf0001
    • Device id (pf/vf): 8086:10fb / 8086:10ed
    • Driver version: 4.0.1-k (ixgbe)
  3. Intel(R) Corporation Ethernet Connection X552/X557-AT 10GBASE-T
    • Firmware version: 0x800001cf
    • Device id (pf/vf): 8086:15ad / 8086:15a8
    • Driver version: 4.2.5 (ixgbe)
  4. Intel(R) Ethernet Converged Network Adapter X710-DA4 (4x10G)
    • Firmware version: 5.04
    • Device id (pf/vf): 8086:1572 / 8086:154c
    • Driver version: 1.4.26 (i40e)
  5. Intel(R) Ethernet Converged Network Adapter X710-DA2 (2x10G)
    • Firmware version: 5.04
    • Device id (pf/vf): 8086:1572 / 8086:154c
    • Driver version: 1.4.25 (i40e)
  6. Intel(R) Ethernet Converged Network Adapter XL710-QDA1 (1x40G)
    • Firmware version: 5.04
    • Device id (pf/vf): 8086:1584 / 8086:154c
    • Driver version: 1.4.25 (i40e)
  7. Intel(R) Ethernet Converged Network Adapter XL710-QDA2 (2X40G)
    • Firmware version: 5.04
    • Device id (pf/vf): 8086:1583 / 8086:154c
    • Driver version: 1.4.25 (i40e)
  8. Intel(R) Corporation I350 Gigabit Network Connection
    • Firmware version: 1.48, 0x800006e7
    • Device id (pf/vf): 8086:1521 / 8086:1520
    • Driver version: 5.2.13-k (igb)
  9. Intel(R) Ethernet Multi-host Controller FM10000
    • Firmware version: N/A
    • Device id (pf/vf): 8086:15d0
    • Driver version: 0.17.0.9 (fm10k)

2.9. Tested OSes

  • CentOS 7.0
  • Fedora 23
  • Fedora 24
  • FreeBSD 10.3
  • Red Hat Enterprise Linux 7.2
  • SUSE Enterprise Linux 12
  • Ubuntu 15.10
  • Ubuntu 16.04 LTS
  • Wind River Linux 8

2.10. Fixes in Stable Release

2.10.1. 16.07.1

The following fixes were applied in DPDK 16.07.01 Stable Release:

  • app/test: fix verification of digest for GCM
  • app/testpmd: fix crash when mempool allocation fails
  • app/testpmd: fix help of MTU set commmand
  • app/testpmd: fix timeout in Rx queue flushing
  • contigmem: zero all pages during mmap
  • crypto/null: fix key size increment value
  • crypto/qat: fix FreeBSD build
  • crypto: fix build with icc
  • examples/ip_pipeline: fix Python interpreter
  • examples/ip_pipeline: fix lcore mapping for ppc64
  • hash: fix false zero signature key hit lookup
  • hash: fix ring size
  • mbuf: fix error handling on pool creation
  • mem: fix build with -O1
  • mem: fix crash on hugepage mapping error
  • mempool: fix corruption due to invalid handler
  • net/e1000: fix returned number of available Rx descriptors
  • net/enic: fix bad L4 checksum flag on ICMP packets
  • net/enic: fix freeing memory for descriptor ring
  • net/fm10k: fix MAC address removal from switch
  • net/i40e/base: fix UDP packet header
  • net/i40e: fix dropping packets with ethertype 0x88A8
  • net/i40e: fix mbuf leak during Rx queue release
  • net/i40e: fix null pointer dereferences when using VMDq+RSS
  • net/i40e: fix parsing QinQ packets type
  • net/ixgbe/base: fix check for NACK
  • net/ixgbe/base: fix pointer check
  • net/ixgbe/base: fix possible corruption of shadow RAM
  • net/ixgbe/base: fix skipping PHY config
  • net/ixgbe: fix VF reset to apply to correct VF
  • net/ixgbe: fix mbuf leak during Rx queue release
  • net/mlx: fix debug build with gcc 6.1
  • net/nfp: fix copying MAC address
  • net/pcap: fix memory leak in jumbo frames
  • net/virtio: fix xstats name
  • net/virtio_user: fix error management during init
  • net/virtio_user: fix first queue pair without multiqueue
  • net/virtio_user: fix wrong sequence of messages
  • pci: fix memory leak when detaching device
  • pmdinfogen: fix clang build
  • sched: fix releasing enqueued packets
  • table: fix symbol exports
  • timer: fix lag delay
  • tools: fix json output of pmdinfo
  • tools: fix virtio interface name when binding

2.10.2. 16.07.2

  • app/procinfo: free xstats memory upon failure
  • app/test: fix hash multiwriter sequence
  • app/testpmd: fix DCB configuration
  • app/testpmd: fix DCB configuration
  • app/testpmd: fix PF/VF check of flow director
  • app/testpmd: fix RSS hash key size
  • app/testpmd: fix flow director endianness
  • app/testpmd: fix flow director mask
  • doc: add limitations for i40e PMD
  • eal/arm: fix file descriptor leak when getting CPU features
  • eal/ppc: fix file descriptor leak when getting CPU features
  • ethdev: fix vendor id in debug message
  • ethdev: prevent duplicate event callback
  • examples/ip_pipeline: fix plugin loading
  • examples/ipsec-secgw: check SP only when setup
  • examples/l2fwd-crypto: fix verify with decrypt in chain
  • examples/qos_sched: fix dequeue from ring
  • examples/tep_term: fix L4 length
  • examples/tep_term: fix packet length with multi-segments
  • hash: fix bucket size usage
  • hash: fix unlimited cuckoo path
  • kni: fix build with kernel 4.8
  • kni: fix build with kernel 4.9
  • lpm: fix freeing memory
  • lpm: fix freeing unused sub-table on rule delete
  • mempool: fix leak if populate fails
  • mempool: fix search of maximum contiguous pages
  • net/bnx2x: fix build with icc
  • net/bnx2x: fix maximum PF queues
  • net/bnx2x: fix socket id for slowpath memory
  • net/bnxt: ensure entry length is unsigned
  • net/bnxt: fix bit shift size
  • net/bnxt: fix crash when closing
  • net/bonding: validate speed after link up
  • net/ena: improve safety of string handling
  • net/enic: document how to configure vNIC parameters
  • net/enic: fix Rx queue index when not using Rx scatter
  • net/enic: fix crash on MTU update or Rx queue reconfigure
  • net/enic: fix crash with removed flow director filters
  • net/enic: fix flow director
  • net/enic: fix max packet length check
  • net/enic: fix multi-queue Rx performance
  • net/enic: revert truncated packets counter fix
  • net/fm10k: fix Rx checksum flags
  • net/fm10k: fix VF Tx queue initialization
  • net/fm10k: fix out of order Rx read
  • net/i40e: do not use VSI before NULL check
  • net/i40e: fix DCB configuration
  • net/i40e: fix Rx hang when disable LLDP
  • net/i40e: fix VF bonded device link down
  • net/i40e: fix floating VEB
  • net/i40e: fix hash filter on X722
  • net/i40e: fix link status change interrupt
  • net/i40e: fix out of order Rx read
  • net/i40e: fixed build error with icc
  • net/ixgbe: fix VF registers
  • net/ixgbe: fix flow director mask
  • net/ixgbe: fix out of order Rx read
  • net/mlx5: fix Rx VLAN offload capability report
  • net/mlx5: fix Rx checksum macros
  • net/mlx5: fix Rx function selection
  • net/mlx5: fix flow director drop mode
  • net/mlx5: fix handling of small mbuf sizes
  • net/mlx5: fix hash key size retrieval
  • net/mlx5: fix inconsistent return value in flow director
  • net/mlx5: fix initialization in secondary process
  • net/mlx5: fix inline logic
  • net/mlx5: fix link speed capability information
  • net/mlx5: fix link status report
  • net/mlx5: fix possible NULL dereference in Rx path
  • net/mlx5: fix removing VLAN filter
  • net/mlx5: fix support for newer link speeds
  • net/mlx5: re-factorize functions
  • net/mlx5: refactor allocation of flow director queues
  • net/mlx5: support Mellanox OFED 3.4
  • net/qede/base: fix 32-bit build
  • net/ring: fix ring device creation via devargs
  • net/thunderx: fix Tx checksum handling
  • net/virtio: revert fix restart
  • net/vmxnet3: fix mbuf release on reset/stop
  • pci: fix probing error if no driver found
  • pdump: fix created directory permissions
  • vhost: fix Windows VM hang