.. Copyright (c) <2015-2017>, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
- Neither the name of Intel Corporation nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
====================
VF Packet RxTX Tests
====================
Test Case 1: VF_packet_IO_kernel_PF_dpdk_VF
===========================================
1. Got the pci device id of DUT, for example::
./usertools/dpdk-devbind.py -s
0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
2. Create 2 VFs from 2 PFs::
echo 1 > /sys/bus/pci/devices/0000\:81\:00.0/sriov_numvfs
echo 1 > /sys/bus/pci/devices/0000\:81\:00.1/sriov_numvfs
./usertools/dpdk-devbind.py -s
0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
0000:81:02.0 'XL710/X710 Virtual Function' unused=
0000:81:0a.0 'XL710/X710 Virtual Function' unused=
3. Detach VFs from the host, bind them to pci-stub driver::
/sbin/modprobe pci-stub
using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 154c",
echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:81:02.0 > /sys/bus/pci/devices/0000:08:02.0/driver/unbind
echo 0000:81:02.0 > /sys/bus/pci/drivers/pci-stub/bind
echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:81:0a.0 > /sys/bus/pci/devices/0000:08:0a.0/driver/unbind
echo 0000:81:0a.0 > /sys/bus/pci/drivers/pci-stub/bind
or using the following more easy way::
virsh nodedev-detach pci_0000_81_02_0;
virsh nodedev-detach pci_0000_81_0a_0;
./usertools/dpdk-devbind.py -s
0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
0000:81:02.0 'XL710/X710 Virtual Function' if= drv=pci-stub unused=
0000:81:0a.0 'XL710/X710 Virtual Function' if= drv=pci-stub unused=
it can be seen that VFs 81:02.0 & 81:0a.0 's drv is pci-stub.
4. Passthrough VFs 81:02.0 & 81:0a.0 to vm0, and start vm0::
/usr/bin/qemu-system-x86_64 -name vm0 -enable-kvm \
-cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img -vnc :1 \
-device pci-assign,host=81:02.0,id=pt_0 \
-device pci-assign,host=81:0a.0,id=pt_1
5. Login vm0, got VFs pci device id in vm0, assume they are 00:06.0 & 00:07.0, bind them to igb_uio driver,
and then start testpmd, set it in mac forward mode::
./usertools/dpdk-devbind.py -s --bind=igb_uio 00:06.0 00:07.0
./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 -w 00:06.0 -w 00:07.0 \
-- -i --portmask=0x3 --tx-offloads=0x8fff
testpmd> set fwd mac
testpmd> start
6. Get mac address of one VF and use it as dest mac, using scapy to send 2000 random packets from tester,
verify the packets can be received by one VF and can be forward to another VF correctly.
Test Case 2: VF_packet_IO_dpdk_PF_dpdk_VF
===========================================
1. Got the pci device id of DUT, for example::
./usertools/dpdk-devbind.py -s
0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
2. bind pf to igb_uio and Create 2 VFs from 2 PFs::
./usertools/dpdk-devbind.py --bind=igb_uio 0000:81:00.0 0000:81:00.1
echo 1 > /sys/bus/pci/devices/0000\:81\:00.0/max_vfs
echo 1 > /sys/bus/pci/devices/0000\:81\:00.1/max_vfs
3. Detach VFs from the host, bind them to pci-stub driver::
/sbin/modprobe pci-stub
using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 154c",
echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:81:02.0 > /sys/bus/pci/devices/0000:08:02.0/driver/unbind
echo 0000:81:02.0 > /sys/bus/pci/drivers/pci-stub/bind
echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:81:0a.0 > /sys/bus/pci/devices/0000:08:0a.0/driver/unbind
echo 0000:81:0a.0 > /sys/bus/pci/drivers/pci-stub/bind
or using the following more easy way::
virsh nodedev-detach pci_0000_81_02_0;
virsh nodedev-detach pci_0000_81_0a_0;
./usertools/dpdk-devbind.py -s
0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
0000:81:02.0 'XL710/X710 Virtual Function' if= drv=pci-stub unused=
0000:81:0a.0 'XL710/X710 Virtual Function' if= drv=pci-stub unused=
it can be seen that VFs 81:02.0 & 81:0a.0 's drv is pci-stub.
4. Start testpmd on host::
./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -b 0000:81:02.0 -b 0000:81:0a.0 -- -i
5. Passthrough VFs 81:02.0 & 81:0a.0 to vm0, and start vm0::
/usr/bin/qemu-system-x86_64 -name vm0 -enable-kvm \
-cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img -vnc :1 \
-device pci-assign,host=81:02.0,id=pt_0 \
-device pci-assign,host=81:0a.0,id=pt_1
6. Login vm0, got VFs pci device id in vm0, assume they are 00:06.0 & 00:07.0, bind them to igb_uio driver,
and then start testpmd, set it in mac forward mode::
./usertools/dpdk-devbind.py --bind=igb_uio 00:06.0 00:07.0
./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 -w 00:06.0 -w 00:07.0 \
-- -i
testpmd> set fwd mac
testpmd> start
7. Get mac address of one VF and use it as dest mac, using scapy to send 2000 random packets from tester,
verify the packets can be received by one VF and can be forward to another VF correctly.
Test Case 3: pf dpdk vf reset
===========================================
this case pf in dpdk
===========================================
1. Got the pci device id of DUT, for example::
./usertools/dpdk-devbind.py -s
0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
2. bind pf to igb_uio and Create 3 VFs from pf0::
./usertools/dpdk-devbind.py --bind=igb_uio 0000:81:00.0
echo 3 > /sys/bus/pci/devices/0000\:81\:00.0/max_vfs
3. Detach VFs from the host, bind them to pci-stub driver::
/sbin/modprobe pci-stub
using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 154c",
echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:81:02.0 > /sys/bus/pci/devices/0000:08:02.0/driver/unbind
echo 0000:81:02.0 > /sys/bus/pci/drivers/pci-stub/bind
echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:81:02.1 > /sys/bus/pci/devices/0000:08:02.1/driver/unbind
echo 0000:81:02.1 > /sys/bus/pci/drivers/pci-stub/bind
echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:81:02.2 > /sys/bus/pci/devices/0000:08:02.2/driver/unbind
echo 0000:81:02.2 > /sys/bus/pci/drivers/pci-stub/bind
it can be seen that VFs 81:02.0 & 81:02.1 & 81:02.2 's drv is pci-stub.
4. Start testpmd on host::
./x86_64-native-linuxapp-gcc/app/testpmd -c 0x600000000006 -n 4 -b 0000:81:02.0 -b 0000:81:02.1 -b 0000:81:02.2 -- -i
5. Passthrough VFs 81:02.0 & 81:02.1 to vm0, and start vm0::
/usr/bin/qemu-system-x86_64 -name vm0 -enable-kvm \
-cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img -vnc :1 \
-device pci-assign,host=81:02.0,id=pt_0 \
-device pci-assign,host=81:02.1,id=pt_1
6. Passthrough VFs 81:02.2 to vm1, and start vm1::
/usr/bin/qemu-system-x86_64 -name vm0 -enable-kvm \
-cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-2.img -vnc :2 \
-device pci-assign,host=81:02.2,id=pt_0
7. Login vm0 and vm1, got VFs pci device id in vm0 and vm1, assume they are 00:04.0 & 00:05.0 on vm0,00:04.0 on vm1, bind them to igb_uio driver,for vm0::
./usertools/dpdk-devbind.py --bind=igb_uio 00:04.0 00:05.0
./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 1 -- -i
testpmd> set fwd mac
testpmd> start
8. On vm 1::
./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 1 -- -i
9. On vm0::
testpmd>clear port stats all
10. Tester loop send packet to vf0 on vm0
11. On vm1 loop start stop port 1000 times::
testpmd>port stop all
testpmd>port start all
12. Tester stop send packet
13. On vm0,check port stats,verify vf0 vf1 can receive packet ,no error
Test Case 4: pf kernel vf reset
===========================================
this case pf in kernel
===========================================
1. Got the pci device id of DUT, for example::
./usertools/dpdk-devbind.py -s
0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
2. bind pf to igb_uio and Create 3 VFs from pf0::
echo 3 > /sys/bus/pci/devices/0000\:81\:00.0/sriov_nums
3. Detach VFs from the host, bind them to pci-stub driver::
/sbin/modprobe pci-stub
using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 154c",
echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:81:02.0 > /sys/bus/pci/devices/0000:08:02.0/driver/unbind
echo 0000:81:02.0 > /sys/bus/pci/drivers/pci-stub/bind
echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:81:02.1 > /sys/bus/pci/devices/0000:08:02.1/driver/unbind
echo 0000:81:02.1 > /sys/bus/pci/drivers/pci-stub/bind
echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:81:02.2 > /sys/bus/pci/devices/0000:08:02.2/driver/unbind
echo 0000:81:02.2 > /sys/bus/pci/drivers/pci-stub/bind
it can be seen that VFs 81:02.0 & 81:02.1 & 81:02.2 's drv is pci-stub.
4. Passthrough VFs 81:02.0 & 81:02.1 to vm0, and start vm0::
/usr/bin/qemu-system-x86_64 -name vm0 -enable-kvm \
-cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img -vnc :1 \
-device pci-assign,host=81:02.0,id=pt_0 \
-device pci-assign,host=81:02.1,id=pt_1
5. Passthrough VFs 81:02.2 to vm1, and start vm1::
/usr/bin/qemu-system-x86_64 -name vm0 -enable-kvm \
-cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-2.img -vnc :2 \
-device pci-assign,host=81:02.2,id=pt_0
6. Login vm0 and vm1, got VFs pci device id in vm0 and vm1, assume they are 00:04.0 & 00:05.0 on vm0,00:04.0 on vm1, bind them to igb_uio driver,for vm0::
./usertools/dpdk-devbind.py --bind=igb_uio 00:04.0 00:05.0
./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 1 -- -i
testpmd> set fwd mac
testpmd> start
7. On vm 1::
./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 1 -- -i
8. On vm0::
testpmd>clear port stats all
9. Tester loop send packet to vf0 on vm0
10. On vm1 loop start stop port 1000 times::
testpmd>port stop all
testpmd>port start all
11. Tester stop send packet
12. On vm0,check port stats,verify vf0 vf1 can receive packet ,no error