DPDK  22.07.0
examples/skeleton/basicfwd.c
/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2010-2015 Intel Corporation
*/
#include <stdint.h>
#include <inttypes.h>
#include <rte_eal.h>
#include <rte_ethdev.h>
#include <rte_cycles.h>
#include <rte_lcore.h>
#include <rte_mbuf.h>
#define RX_RING_SIZE 1024
#define TX_RING_SIZE 1024
#define NUM_MBUFS 8191
#define MBUF_CACHE_SIZE 250
#define BURST_SIZE 32
/* basicfwd.c: Basic DPDK skeleton forwarding example. */
/*
* Initializes a given port using global settings and with the RX buffers
* coming from the mbuf_pool passed as a parameter.
*/
/* Main functional part of port initialization. 8< */
static inline int
port_init(uint16_t port, struct rte_mempool *mbuf_pool)
{
struct rte_eth_conf port_conf;
const uint16_t rx_rings = 1, tx_rings = 1;
uint16_t nb_rxd = RX_RING_SIZE;
uint16_t nb_txd = TX_RING_SIZE;
int retval;
uint16_t q;
struct rte_eth_dev_info dev_info;
struct rte_eth_txconf txconf;
return -1;
memset(&port_conf, 0, sizeof(struct rte_eth_conf));
retval = rte_eth_dev_info_get(port, &dev_info);
if (retval != 0) {
printf("Error during getting device (port %u) info: %s\n",
port, strerror(-retval));
return retval;
}
port_conf.txmode.offloads |=
/* Configure the Ethernet device. */
retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
if (retval != 0)
return retval;
retval = rte_eth_dev_adjust_nb_rx_tx_desc(port, &nb_rxd, &nb_txd);
if (retval != 0)
return retval;
/* Allocate and set up 1 RX queue per Ethernet port. */
for (q = 0; q < rx_rings; q++) {
retval = rte_eth_rx_queue_setup(port, q, nb_rxd,
rte_eth_dev_socket_id(port), NULL, mbuf_pool);
if (retval < 0)
return retval;
}
txconf = dev_info.default_txconf;
txconf.offloads = port_conf.txmode.offloads;
/* Allocate and set up 1 TX queue per Ethernet port. */
for (q = 0; q < tx_rings; q++) {
retval = rte_eth_tx_queue_setup(port, q, nb_txd,
rte_eth_dev_socket_id(port), &txconf);
if (retval < 0)
return retval;
}
/* Starting Ethernet port. 8< */
retval = rte_eth_dev_start(port);
/* >8 End of starting of ethernet port. */
if (retval < 0)
return retval;
/* Display the port MAC address. */
struct rte_ether_addr addr;
retval = rte_eth_macaddr_get(port, &addr);
if (retval != 0)
return retval;
printf("Port %u MAC: %02" PRIx8 " %02" PRIx8 " %02" PRIx8
" %02" PRIx8 " %02" PRIx8 " %02" PRIx8 "\n",
port, RTE_ETHER_ADDR_BYTES(&addr));
/* Enable RX in promiscuous mode for the Ethernet device. */
/* End of setting RX port in promiscuous mode. */
if (retval != 0)
return retval;
return 0;
}
/* >8 End of main functional part of port initialization. */
/*
* The lcore main. This is the main thread that does the work, reading from
* an input port and writing to an output port.
*/
/* Basic forwarding application lcore. 8< */
static __rte_noreturn void
lcore_main(void)
{
uint16_t port;
/*
* Check that the port is on the same NUMA node as the polling thread
* for best performance.
*/
if (rte_eth_dev_socket_id(port) >= 0 &&
(int)rte_socket_id())
printf("WARNING, port %u is on remote NUMA node to "
"polling thread.\n\tPerformance will "
"not be optimal.\n", port);
printf("\nCore %u forwarding packets. [Ctrl+C to quit]\n",
/* Main work of application loop. 8< */
for (;;) {
/*
* Receive packets on a port and forward them on the paired
* port. The mapping is 0 -> 1, 1 -> 0, 2 -> 3, 3 -> 2, etc.
*/
/* Get burst of RX packets, from first port of pair. */
struct rte_mbuf *bufs[BURST_SIZE];
const uint16_t nb_rx = rte_eth_rx_burst(port, 0,
bufs, BURST_SIZE);
if (unlikely(nb_rx == 0))
continue;
/* Send burst of TX packets, to second port of pair. */
const uint16_t nb_tx = rte_eth_tx_burst(port ^ 1, 0,
bufs, nb_rx);
/* Free any unsent packets. */
if (unlikely(nb_tx < nb_rx)) {
uint16_t buf;
for (buf = nb_tx; buf < nb_rx; buf++)
rte_pktmbuf_free(bufs[buf]);
}
}
}
/* >8 End of loop. */
}
/* >8 End Basic forwarding application lcore. */
/*
* The main function, which does initialization and calls the per-lcore
* functions.
*/
int
main(int argc, char *argv[])
{
struct rte_mempool *mbuf_pool;
unsigned nb_ports;
uint16_t portid;
/* Initializion the Environment Abstraction Layer (EAL). 8< */
int ret = rte_eal_init(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
/* >8 End of initialization the Environment Abstraction Layer (EAL). */
argc -= ret;
argv += ret;
/* Check that there is an even number of ports to send/receive on. */
if (nb_ports < 2 || (nb_ports & 1))
rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n");
/* Creates a new mempool in memory to hold the mbufs. */
/* Allocates mempool to hold the mbufs. 8< */
mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
/* >8 End of allocating mempool to hold mbuf. */
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
/* Initializing all ports. 8< */
if (port_init(portid, mbuf_pool) != 0)
rte_exit(EXIT_FAILURE, "Cannot init port %"PRIu16 "\n",
portid);
/* >8 End of initializing all ports. */
if (rte_lcore_count() > 1)
printf("\nWARNING: Too many lcores enabled. Only 1 used.\n");
/* Call lcore_main on the main core only. Called on single lcore. 8< */
lcore_main();
/* >8 End of called on single lcore. */
/* clean up the EAL */
return 0;
}