examples/skeleton/basicfwd.c

/* SPDX-License-Identifier: BSD-3-Clause
 * Copyright(c) 2010-2015 Intel Corporation
 */
 
#include <stdint.h>
#include <inttypes.h>
#include <rte_eal.h>
#include <rte_ethdev.h>
#include <rte_cycles.h>
#include <rte_lcore.h>
#include <rte_mbuf.h>
 
#define RX_RING_SIZE 1024
#define TX_RING_SIZE 1024
 
#define NUM_MBUFS 8191
#define MBUF_CACHE_SIZE 250
#define BURST_SIZE 32
 
/* basicfwd.c: Basic DPDK skeleton forwarding example. */
 
/*
 * Initializes a given port using global settings and with the RX buffers
 * coming from the mbuf_pool passed as a parameter.
 */
 
/* Main functional part of port initialization. 8< */
static inline int
port_init(uint16_t port, struct rte_mempool *mbuf_pool)
{
    struct rte_eth_conf port_conf;
    const uint16_t rx_rings = 1, tx_rings = 1;
    uint16_t nb_rxd = RX_RING_SIZE;
    uint16_t nb_txd = TX_RING_SIZE;
    int retval;
    uint16_t q;
    struct rte_eth_dev_info dev_info;
    struct rte_eth_txconf txconf;
 
    if (!rte_eth_dev_is_valid_port(port))
        return -1;
 
    memset(&port_conf, 0, sizeof(struct rte_eth_conf));
 
    retval = rte_eth_dev_info_get(port, &dev_info);
    if (retval != 0) {
        printf("Error during getting device (port %u) info: %s\n",
                port, strerror(-retval));
        return retval;
    }
 
    if (dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE)
        port_conf.txmode.offloads |=
            RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE;
 
    /* Configure the Ethernet device. */
    retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
    if (retval != 0)
        return retval;
 
    retval = rte_eth_dev_adjust_nb_rx_tx_desc(port, &nb_rxd, &nb_txd);
    if (retval != 0)
        return retval;
 
    /* Allocate and set up 1 RX queue per Ethernet port. */
    for (q = 0; q < rx_rings; q++) {
        retval = rte_eth_rx_queue_setup(port, q, nb_rxd,
                rte_eth_dev_socket_id(port), NULL, mbuf_pool);
        if (retval < 0)
            return retval;
    }
 
    txconf = dev_info.default_txconf;
    txconf.offloads = port_conf.txmode.offloads;
    /* Allocate and set up 1 TX queue per Ethernet port. */
    for (q = 0; q < tx_rings; q++) {
        retval = rte_eth_tx_queue_setup(port, q, nb_txd,
                rte_eth_dev_socket_id(port), &txconf);
        if (retval < 0)
            return retval;
    }
 
    /* Starting Ethernet port. 8< */
    retval = rte_eth_dev_start(port);
    /* >8 End of starting of ethernet port. */
    if (retval < 0)
        return retval;
 
    /* Display the port MAC address. */
    struct rte_ether_addr addr;
    retval = rte_eth_macaddr_get(port, &addr);
    if (retval != 0)
        return retval;
 
    printf("Port %u MAC: %02" PRIx8 " %02" PRIx8 " %02" PRIx8
               " %02" PRIx8 " %02" PRIx8 " %02" PRIx8 "\n",
            port, RTE_ETHER_ADDR_BYTES(&addr));
 
    /* Enable RX in promiscuous mode for the Ethernet device. */
    retval = rte_eth_promiscuous_enable(port);
    /* End of setting RX port in promiscuous mode. */
    if (retval != 0)
        return retval;
 
    return 0;
}
/* >8 End of main functional part of port initialization. */
 
/*
 * The lcore main. This is the main thread that does the work, reading from
 * an input port and writing to an output port.
 */
 
 /* Basic forwarding application lcore. 8< */
static __rte_noreturn void
lcore_main(void)
{
    uint16_t port;
 
    /*
     * Check that the port is on the same NUMA node as the polling thread
     * for best performance.
     */
    RTE_ETH_FOREACH_DEV(port)
        if (rte_eth_dev_socket_id(port) >= 0 &&
                rte_eth_dev_socket_id(port) !=
                        (int)rte_socket_id())
            printf("WARNING, port %u is on remote NUMA node to "
                    "polling thread.\n\tPerformance will "
                    "not be optimal.\n", port);
 
    printf("\nCore %u forwarding packets. [Ctrl+C to quit]\n",
            rte_lcore_id());
 
    /* Main work of application loop. 8< */
    for (;;) {
        /*
         * Receive packets on a port and forward them on the paired
         * port. The mapping is 0 -> 1, 1 -> 0, 2 -> 3, 3 -> 2, etc.
         */
        RTE_ETH_FOREACH_DEV(port) {
 
            /* Get burst of RX packets, from first port of pair. */
            struct rte_mbuf *bufs[BURST_SIZE];
            const uint16_t nb_rx = rte_eth_rx_burst(port, 0,
                    bufs, BURST_SIZE);
 
            if (unlikely(nb_rx == 0))
                continue;
 
            /* Send burst of TX packets, to second port of pair. */
            const uint16_t nb_tx = rte_eth_tx_burst(port ^ 1, 0,
                    bufs, nb_rx);
 
            /* Free any unsent packets. */
            if (unlikely(nb_tx < nb_rx)) {
                uint16_t buf;
                for (buf = nb_tx; buf < nb_rx; buf++)
                    rte_pktmbuf_free(bufs[buf]);
            }
        }
    }
    /* >8 End of loop. */
}
/* >8 End Basic forwarding application lcore. */
 
/*
 * The main function, which does initialization and calls the per-lcore
 * functions.
 */
int
main(int argc, char *argv[])
{
    struct rte_mempool *mbuf_pool;
    unsigned nb_ports;
    uint16_t portid;
 
    /* Initializion the Environment Abstraction Layer (EAL). 8< */
    int ret = rte_eal_init(argc, argv);
    if (ret < 0)
        rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
    /* >8 End of initialization the Environment Abstraction Layer (EAL). */
 
    argc -= ret;
    argv += ret;
 
    /* Check that there is an even number of ports to send/receive on. */
    nb_ports = rte_eth_dev_count_avail();
    if (nb_ports < 2 || (nb_ports & 1))
        rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n");
 
    /* Creates a new mempool in memory to hold the mbufs. */
 
    /* Allocates mempool to hold the mbufs. 8< */
    mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
        MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
    /* >8 End of allocating mempool to hold mbuf. */
 
    if (mbuf_pool == NULL)
        rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
 
    /* Initializing all ports. 8< */
    RTE_ETH_FOREACH_DEV(portid)
        if (port_init(portid, mbuf_pool) != 0)
            rte_exit(EXIT_FAILURE, "Cannot init port %"PRIu16 "\n",
                    portid);
    /* >8 End of initializing all ports. */
 
    if (rte_lcore_count() > 1)
        printf("\nWARNING: Too many lcores enabled. Only 1 used.\n");
 
    /* Call lcore_main on the main core only. Called on single lcore. 8< */
    lcore_main();
    /* >8 End of called on single lcore. */
 
    /* clean up the EAL */
    rte_eal_cleanup();
 
    return 0;
}