examples/kni/main.c

/* SPDX-License-Identifier: BSD-3-Clause
 * Copyright(c) 2010-2014 Intel Corporation
 */

#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <inttypes.h>
#include <string.h>
#include <sys/queue.h>
#include <stdarg.h>
#include <errno.h>
#include <getopt.h>

#include <netinet/in.h>
#include <linux/if.h>
#include <linux/if_tun.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <unistd.h>
#include <signal.h>

#include <rte_common.h>
#include <rte_log.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
#include <rte_bus_pci.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_string_fns.h>
#include <rte_cycles.h>
#include <rte_malloc.h>
#include <rte_kni.h>

/* Macros for printing using RTE_LOG */
#define RTE_LOGTYPE_APP RTE_LOGTYPE_USER1

/* Max size of a single packet */
#define MAX_PACKET_SZ           2048

/* Size of the data buffer in each mbuf */
#define MBUF_DATA_SZ (MAX_PACKET_SZ + RTE_PKTMBUF_HEADROOM)

/* Number of mbufs in mempool that is created */
#define NB_MBUF                 (8192 * 16)

/* How many packets to attempt to read from NIC in one go */
#define PKT_BURST_SZ            32

/* How many objects (mbufs) to keep in per-lcore mempool cache */
#define MEMPOOL_CACHE_SZ        PKT_BURST_SZ

/* Number of RX ring descriptors */
#define NB_RXD                  1024

/* Number of TX ring descriptors */
#define NB_TXD                  1024

/* Total octets in ethernet header */
#define KNI_ENET_HEADER_SIZE    14

/* Total octets in the FCS */
#define KNI_ENET_FCS_SIZE       4

#define KNI_US_PER_SECOND       1000000
#define KNI_SECOND_PER_DAY      86400

#define KNI_MAX_KTHREAD 32
/*
 * Structure of port parameters
 */
struct kni_port_params {
    uint16_t port_id;/* Port ID */
    unsigned lcore_rx; /* lcore ID for RX */
    unsigned lcore_tx; /* lcore ID for TX */
    uint32_t nb_lcore_k; /* Number of lcores for KNI multi kernel threads */
    uint32_t nb_kni; /* Number of KNI devices to be created */
    unsigned lcore_k[KNI_MAX_KTHREAD]; /* lcore ID list for kthreads */
    struct rte_kni *kni[KNI_MAX_KTHREAD]; /* KNI context pointers */
} __rte_cache_aligned;

static struct kni_port_params *kni_port_params_array[RTE_MAX_ETHPORTS];


/* Options for configuring ethernet port */
static struct rte_eth_conf port_conf = {
    .txmode = {
        .mq_mode = RTE_ETH_MQ_TX_NONE,
    },
};

/* Mempool for mbufs */
static struct rte_mempool * pktmbuf_pool = NULL;

/* Mask of enabled ports */
static uint32_t ports_mask = 0;
/* Ports set in promiscuous mode off by default. */
static int promiscuous_on = 0;
/* Monitor link status continually. off by default. */
static int monitor_links;

/* Structure type for recording kni interface specific stats */
struct kni_interface_stats {
    /* number of pkts received from NIC, and sent to KNI */
    uint64_t rx_packets;

    /* number of pkts received from NIC, but failed to send to KNI */
    uint64_t rx_dropped;

    /* number of pkts received from KNI, and sent to NIC */
    uint64_t tx_packets;

    /* number of pkts received from KNI, but failed to send to NIC */
    uint64_t tx_dropped;
};

/* kni device statistics array */
static struct kni_interface_stats kni_stats[RTE_MAX_ETHPORTS];

static int kni_change_mtu(uint16_t port_id, unsigned int new_mtu);
static int kni_config_network_interface(uint16_t port_id, uint8_t if_up);
static int kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[]);

static uint32_t kni_stop;
static uint32_t kni_pause;

/* Print out statistics on packets handled */
static void
print_stats(void)
{
    uint16_t i;

    printf("\n**KNI example application statistics**\n"
           "======  ==============  ============  ============  ============  ============\n"
           " Port    Lcore(RX/TX)    rx_packets    rx_dropped    tx_packets    tx_dropped\n"
           "------  --------------  ------------  ------------  ------------  ------------\n");
    for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
        if (!kni_port_params_array[i])
            continue;

        printf("%7d %10u/%2u %13"PRIu64" %13"PRIu64" %13"PRIu64" "
                            "%13"PRIu64"\n", i,
                    kni_port_params_array[i]->lcore_rx,
                    kni_port_params_array[i]->lcore_tx,
                        kni_stats[i].rx_packets,
                        kni_stats[i].rx_dropped,
                        kni_stats[i].tx_packets,
                        kni_stats[i].tx_dropped);
    }
    printf("======  ==============  ============  ============  ============  ============\n");

    fflush(stdout);
}

/* Custom handling of signals to handle stats and kni processing */
static void
signal_handler(int signum)
{
    /* When we receive a USR1 signal, print stats */
    if (signum == SIGUSR1) {
        print_stats();
    }

    /* When we receive a USR2 signal, reset stats */
    if (signum == SIGUSR2) {
        memset(&kni_stats, 0, sizeof(kni_stats));
        printf("\n** Statistics have been reset **\n");
        return;
    }

    /*
     * When we receive a RTMIN or SIGINT or SIGTERM signal,
     * stop kni processing
     */
    if (signum == SIGRTMIN || signum == SIGINT || signum == SIGTERM) {
        printf("\nSIGRTMIN/SIGINT/SIGTERM received. "
            "KNI processing stopping.\n");
        __atomic_fetch_add(&kni_stop, 1, __ATOMIC_RELAXED);
        return;
        }
}

static void
kni_burst_free_mbufs(struct rte_mbuf **pkts, unsigned num)
{
    unsigned i;

    if (pkts == NULL)
        return;

    for (i = 0; i < num; i++) {
        rte_pktmbuf_free(pkts[i]);
        pkts[i] = NULL;
    }
}

static void
kni_ingress(struct kni_port_params *p)
{
    uint8_t i;
    uint16_t port_id;
    unsigned nb_rx, num;
    uint32_t nb_kni;
    struct rte_mbuf *pkts_burst[PKT_BURST_SZ];

    if (p == NULL)
        return;

    nb_kni = p->nb_kni;
    port_id = p->port_id;
    for (i = 0; i < nb_kni; i++) {
        /* Burst rx from eth */
        nb_rx = rte_eth_rx_burst(port_id, 0, pkts_burst, PKT_BURST_SZ);
        if (unlikely(nb_rx > PKT_BURST_SZ)) {
            RTE_LOG(ERR, APP, "Error receiving from eth\n");
            return;
        }
        /* Burst tx to kni */
        num = rte_kni_tx_burst(p->kni[i], pkts_burst, nb_rx);
        if (num)
            kni_stats[port_id].rx_packets += num;

        rte_kni_handle_request(p->kni[i]);
        if (unlikely(num < nb_rx)) {
            /* Free mbufs not tx to kni interface */
            kni_burst_free_mbufs(&pkts_burst[num], nb_rx - num);
            kni_stats[port_id].rx_dropped += nb_rx - num;
        }
    }
}

static void
kni_egress(struct kni_port_params *p)
{
    uint8_t i;
    uint16_t port_id;
    unsigned nb_tx, num;
    uint32_t nb_kni;
    struct rte_mbuf *pkts_burst[PKT_BURST_SZ];

    if (p == NULL)
        return;

    nb_kni = p->nb_kni;
    port_id = p->port_id;
    for (i = 0; i < nb_kni; i++) {
        /* Burst rx from kni */
        num = rte_kni_rx_burst(p->kni[i], pkts_burst, PKT_BURST_SZ);
        if (unlikely(num > PKT_BURST_SZ)) {
            RTE_LOG(ERR, APP, "Error receiving from KNI\n");
            return;
        }
        /* Burst tx to eth */
        nb_tx = rte_eth_tx_burst(port_id, 0, pkts_burst, (uint16_t)num);
        if (nb_tx)
            kni_stats[port_id].tx_packets += nb_tx;
        if (unlikely(nb_tx < num)) {
            /* Free mbufs not tx to NIC */
            kni_burst_free_mbufs(&pkts_burst[nb_tx], num - nb_tx);
            kni_stats[port_id].tx_dropped += num - nb_tx;
        }
    }
}

static int
main_loop(__rte_unused void *arg)
{
    uint16_t i;
    int32_t f_stop;
    int32_t f_pause;
    const unsigned lcore_id = rte_lcore_id();
    enum lcore_rxtx {
        LCORE_NONE,
        LCORE_RX,
        LCORE_TX,
        LCORE_MAX
    };
    enum lcore_rxtx flag = LCORE_NONE;

    RTE_ETH_FOREACH_DEV(i) {
        if (!kni_port_params_array[i])
            continue;
        if (kni_port_params_array[i]->lcore_rx == (uint8_t)lcore_id) {
            flag = LCORE_RX;
            break;
        } else if (kni_port_params_array[i]->lcore_tx ==
                        (uint8_t)lcore_id) {
            flag = LCORE_TX;
            break;
        }
    }

    if (flag == LCORE_RX) {
        RTE_LOG(INFO, APP, "Lcore %u is reading from port %d\n",
                    kni_port_params_array[i]->lcore_rx,
                    kni_port_params_array[i]->port_id);
        while (1) {
            f_stop = __atomic_load_n(&kni_stop, __ATOMIC_RELAXED);
            f_pause = __atomic_load_n(&kni_pause, __ATOMIC_RELAXED);
            if (f_stop)
                break;
            if (f_pause)
                continue;
            kni_ingress(kni_port_params_array[i]);
        }
    } else if (flag == LCORE_TX) {
        RTE_LOG(INFO, APP, "Lcore %u is writing to port %d\n",
                    kni_port_params_array[i]->lcore_tx,
                    kni_port_params_array[i]->port_id);
        while (1) {
            f_stop = __atomic_load_n(&kni_stop, __ATOMIC_RELAXED);
            f_pause = __atomic_load_n(&kni_pause, __ATOMIC_RELAXED);
            if (f_stop)
                break;
            if (f_pause)
                continue;
            kni_egress(kni_port_params_array[i]);
        }
    } else
        RTE_LOG(INFO, APP, "Lcore %u has nothing to do\n", lcore_id);

    return 0;
}

/* Display usage instructions */
static void
print_usage(const char *prgname)
{
    RTE_LOG(INFO, APP, "\nUsage: %s [EAL options] -- -p PORTMASK -P -m "
           "[--config (port,lcore_rx,lcore_tx,lcore_kthread...)"
           "[,(port,lcore_rx,lcore_tx,lcore_kthread...)]]\n"
           "    -p PORTMASK: hex bitmask of ports to use\n"
           "    -P : enable promiscuous mode\n"
           "    -m : enable monitoring of port carrier state\n"
           "    --config (port,lcore_rx,lcore_tx,lcore_kthread...): "
           "port and lcore configurations\n",
               prgname);
}

/* Convert string to unsigned number. 0 is returned if error occurs */
static uint32_t
parse_unsigned(const char *portmask)
{
    char *end = NULL;
    unsigned long num;

    num = strtoul(portmask, &end, 16);
    if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
        return 0;

    return (uint32_t)num;
}

static void
print_config(void)
{
    uint32_t i, j;
    struct kni_port_params **p = kni_port_params_array;

    for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
        if (!p[i])
            continue;
        RTE_LOG(DEBUG, APP, "Port ID: %d\n", p[i]->port_id);
        RTE_LOG(DEBUG, APP, "Rx lcore ID: %u, Tx lcore ID: %u\n",
                    p[i]->lcore_rx, p[i]->lcore_tx);
        for (j = 0; j < p[i]->nb_lcore_k; j++)
            RTE_LOG(DEBUG, APP, "Kernel thread lcore ID: %u\n",
                            p[i]->lcore_k[j]);
    }
}

static int
parse_config(const char *arg)
{
    const char *p, *p0 = arg;
    char s[256], *end;
    unsigned size;
    enum fieldnames {
        FLD_PORT = 0,
        FLD_LCORE_RX,
        FLD_LCORE_TX,
        _NUM_FLD = KNI_MAX_KTHREAD + 3,
    };
    int i, j, nb_token;
    char *str_fld[_NUM_FLD];
    unsigned long int_fld[_NUM_FLD];
    uint16_t port_id, nb_kni_port_params = 0;

    memset(&kni_port_params_array, 0, sizeof(kni_port_params_array));
    while (((p = strchr(p0, '(')) != NULL) &&
        nb_kni_port_params < RTE_MAX_ETHPORTS) {
        p++;
        if ((p0 = strchr(p, ')')) == NULL)
            goto fail;
        size = p0 - p;
        if (size >= sizeof(s)) {
            printf("Invalid config parameters\n");
            goto fail;
        }
        snprintf(s, sizeof(s), "%.*s", size, p);
        nb_token = rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',');
        if (nb_token <= FLD_LCORE_TX) {
            printf("Invalid config parameters\n");
            goto fail;
        }
        for (i = 0; i < nb_token; i++) {
            errno = 0;
            int_fld[i] = strtoul(str_fld[i], &end, 0);
            if (errno != 0 || end == str_fld[i]) {
                printf("Invalid config parameters\n");
                goto fail;
            }
        }

        i = 0;
        port_id = int_fld[i++];
        if (port_id >= RTE_MAX_ETHPORTS) {
            printf("Port ID %d could not exceed the maximum %d\n",
                        port_id, RTE_MAX_ETHPORTS);
            goto fail;
        }
        if (kni_port_params_array[port_id]) {
            printf("Port %d has been configured\n", port_id);
            goto fail;
        }
        kni_port_params_array[port_id] =
            rte_zmalloc("KNI_port_params",
                    sizeof(struct kni_port_params), RTE_CACHE_LINE_SIZE);
        kni_port_params_array[port_id]->port_id = port_id;
        kni_port_params_array[port_id]->lcore_rx =
                    (uint8_t)int_fld[i++];
        kni_port_params_array[port_id]->lcore_tx =
                    (uint8_t)int_fld[i++];
        if (kni_port_params_array[port_id]->lcore_rx >= RTE_MAX_LCORE ||
        kni_port_params_array[port_id]->lcore_tx >= RTE_MAX_LCORE) {
            printf("lcore_rx %u or lcore_tx %u ID could not "
                        "exceed the maximum %u\n",
                kni_port_params_array[port_id]->lcore_rx,
                kni_port_params_array[port_id]->lcore_tx,
                        (unsigned)RTE_MAX_LCORE);
            goto fail;
        }
        for (j = 0; i < nb_token && j < KNI_MAX_KTHREAD; i++, j++)
            kni_port_params_array[port_id]->lcore_k[j] =
                        (uint8_t)int_fld[i];
        kni_port_params_array[port_id]->nb_lcore_k = j;
    }
    print_config();

    return 0;

fail:
    for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
        if (kni_port_params_array[i]) {
            rte_free(kni_port_params_array[i]);
            kni_port_params_array[i] = NULL;
        }
    }

    return -1;
}

static int
validate_parameters(uint32_t portmask)
{
    uint32_t i;

    if (!portmask) {
        printf("No port configured in port mask\n");
        return -1;
    }

    for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
        if (((portmask & (1 << i)) && !kni_port_params_array[i]) ||
            (!(portmask & (1 << i)) && kni_port_params_array[i]))
            rte_exit(EXIT_FAILURE, "portmask is not consistent "
                "to port ids specified in --config\n");

        if (kni_port_params_array[i] && !rte_lcore_is_enabled(\
            (unsigned)(kni_port_params_array[i]->lcore_rx)))
            rte_exit(EXIT_FAILURE, "lcore id %u for "
                    "port %d receiving not enabled\n",
                    kni_port_params_array[i]->lcore_rx,
                    kni_port_params_array[i]->port_id);

        if (kni_port_params_array[i] && !rte_lcore_is_enabled(\
            (unsigned)(kni_port_params_array[i]->lcore_tx)))
            rte_exit(EXIT_FAILURE, "lcore id %u for "
                    "port %d transmitting not enabled\n",
                    kni_port_params_array[i]->lcore_tx,
                    kni_port_params_array[i]->port_id);

    }

    return 0;
}

#define CMDLINE_OPT_CONFIG  "config"

/* Parse the arguments given in the command line of the application */
static int
parse_args(int argc, char **argv)
{
    int opt, longindex, ret = 0;
    const char *prgname = argv[0];
    static struct option longopts[] = {
        {CMDLINE_OPT_CONFIG, required_argument, NULL, 0},
        {NULL, 0, NULL, 0}
    };

    /* Disable printing messages within getopt() */
    opterr = 0;

    /* Parse command line */
    while ((opt = getopt_long(argc, argv, "p:Pm", longopts,
                        &longindex)) != EOF) {
        switch (opt) {
        case 'p':
            ports_mask = parse_unsigned(optarg);
            break;
        case 'P':
            promiscuous_on = 1;
            break;
        case 'm':
            monitor_links = 1;
            break;
        case 0:
            if (!strncmp(longopts[longindex].name,
                     CMDLINE_OPT_CONFIG,
                     sizeof(CMDLINE_OPT_CONFIG))) {
                ret = parse_config(optarg);
                if (ret) {
                    printf("Invalid config\n");
                    print_usage(prgname);
                    return -1;
                }
            }
            break;
        default:
            print_usage(prgname);
            rte_exit(EXIT_FAILURE, "Invalid option specified\n");
        }
    }

    /* Check that options were parsed ok */
    if (validate_parameters(ports_mask) < 0) {
        print_usage(prgname);
        rte_exit(EXIT_FAILURE, "Invalid parameters\n");
    }

    return ret;
}

/* Initialize KNI subsystem */
static void
init_kni(void)
{
    unsigned int num_of_kni_ports = 0, i;
    struct kni_port_params **params = kni_port_params_array;

    /* Calculate the maximum number of KNI interfaces that will be used */
    for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
        if (kni_port_params_array[i]) {
            num_of_kni_ports += (params[i]->nb_lcore_k ?
                params[i]->nb_lcore_k : 1);
        }
    }

    /* Invoke rte KNI init to preallocate the ports */
    rte_kni_init(num_of_kni_ports);
}

/* Initialise a single port on an Ethernet device */
static void
init_port(uint16_t port)
{
    int ret;
    uint16_t nb_rxd = NB_RXD;
    uint16_t nb_txd = NB_TXD;
    struct rte_eth_dev_info dev_info;
    struct rte_eth_rxconf rxq_conf;
    struct rte_eth_txconf txq_conf;
    struct rte_eth_conf local_port_conf = port_conf;

    /* Initialise device and RX/TX queues */
    RTE_LOG(INFO, APP, "Initialising port %u ...\n", (unsigned)port);
    fflush(stdout);

    ret = rte_eth_dev_info_get(port, &dev_info);
    if (ret != 0)
        rte_exit(EXIT_FAILURE,
            "Error during getting device (port %u) info: %s\n",
            port, strerror(-ret));

    if (dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE)
        local_port_conf.txmode.offloads |=
            RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE;
    ret = rte_eth_dev_configure(port, 1, 1, &local_port_conf);
    if (ret < 0)
        rte_exit(EXIT_FAILURE, "Could not configure port%u (%d)\n",
                    (unsigned)port, ret);

    ret = rte_eth_dev_adjust_nb_rx_tx_desc(port, &nb_rxd, &nb_txd);
    if (ret < 0)
        rte_exit(EXIT_FAILURE, "Could not adjust number of descriptors "
                "for port%u (%d)\n", (unsigned)port, ret);

    rxq_conf = dev_info.default_rxconf;
    rxq_conf.offloads = local_port_conf.rxmode.offloads;
    ret = rte_eth_rx_queue_setup(port, 0, nb_rxd,
        rte_eth_dev_socket_id(port), &rxq_conf, pktmbuf_pool);
    if (ret < 0)
        rte_exit(EXIT_FAILURE, "Could not setup up RX queue for "
                "port%u (%d)\n", (unsigned)port, ret);

    txq_conf = dev_info.default_txconf;
    txq_conf.offloads = local_port_conf.txmode.offloads;
    ret = rte_eth_tx_queue_setup(port, 0, nb_txd,
        rte_eth_dev_socket_id(port), &txq_conf);
    if (ret < 0)
        rte_exit(EXIT_FAILURE, "Could not setup up TX queue for "
                "port%u (%d)\n", (unsigned)port, ret);

    ret = rte_eth_dev_start(port);
    if (ret < 0)
        rte_exit(EXIT_FAILURE, "Could not start port%u (%d)\n",
                        (unsigned)port, ret);

    if (promiscuous_on) {
        ret = rte_eth_promiscuous_enable(port);
        if (ret != 0)
            rte_exit(EXIT_FAILURE,
                "Could not enable promiscuous mode for port%u: %s\n",
                port, rte_strerror(-ret));
    }
}

/* Check the link status of all ports in up to 9s, and print them finally */
static void
check_all_ports_link_status(uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
    uint16_t portid;
    uint8_t count, all_ports_up, print_flag = 0;
    struct rte_eth_link link;
    int ret;
    char link_status_text[RTE_ETH_LINK_MAX_STR_LEN];

    printf("\nChecking link status\n");
    fflush(stdout);
    for (count = 0; count <= MAX_CHECK_TIME; count++) {
        all_ports_up = 1;
        RTE_ETH_FOREACH_DEV(portid) {
            if ((port_mask & (1 << portid)) == 0)
                continue;
            memset(&link, 0, sizeof(link));
            ret = rte_eth_link_get_nowait(portid, &link);
            if (ret < 0) {
                all_ports_up = 0;
                if (print_flag == 1)
                    printf("Port %u link get failed: %s\n",
                        portid, rte_strerror(-ret));
                continue;
            }
            /* print link status if flag set */
            if (print_flag == 1) {
                rte_eth_link_to_str(link_status_text,
                    sizeof(link_status_text), &link);
                printf("Port %d %s\n", portid,
                    link_status_text);
                continue;
            }
            /* clear all_ports_up flag if any link down */
            if (link.link_status == RTE_ETH_LINK_DOWN) {
                all_ports_up = 0;
                break;
            }
        }
        /* after finally printing all link status, get out */
        if (print_flag == 1)
            break;

        if (all_ports_up == 0) {
            printf(".");
            fflush(stdout);
            rte_delay_ms(CHECK_INTERVAL);
        }

        /* set the print_flag if all ports up or timeout */
        if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
            print_flag = 1;
            printf("done\n");
        }
    }
}

static void
log_link_state(struct rte_kni *kni, int prev, struct rte_eth_link *link)
{
    char link_status_text[RTE_ETH_LINK_MAX_STR_LEN];
    if (kni == NULL || link == NULL)
        return;

    rte_eth_link_to_str(link_status_text, sizeof(link_status_text), link);
    if (prev != link->link_status)
        RTE_LOG(INFO, APP, "%s NIC %s\n",
            rte_kni_get_name(kni),
            link_status_text);
}

/*
 * Monitor the link status of all ports and update the
 * corresponding KNI interface(s)
 */
static void *
monitor_all_ports_link_status(void *arg)
{
    uint16_t portid;
    struct rte_eth_link link;
    unsigned int i;
    struct kni_port_params **p = kni_port_params_array;
    int prev;
    (void) arg;
    int ret;

    while (monitor_links) {
        rte_delay_ms(500);
        RTE_ETH_FOREACH_DEV(portid) {
            if ((ports_mask & (1 << portid)) == 0)
                continue;
            memset(&link, 0, sizeof(link));
            ret = rte_eth_link_get_nowait(portid, &link);
            if (ret < 0) {
                RTE_LOG(ERR, APP,
                    "Get link failed (port %u): %s\n",
                    portid, rte_strerror(-ret));
                continue;
            }
            for (i = 0; i < p[portid]->nb_kni; i++) {
                prev = rte_kni_update_link(p[portid]->kni[i],
                        link.link_status);
                log_link_state(p[portid]->kni[i], prev, &link);
            }
        }
    }
    return NULL;
}

static int
kni_change_mtu_(uint16_t port_id, unsigned int new_mtu)
{
    int ret;
    uint16_t nb_rxd = NB_RXD;
    uint16_t nb_txd = NB_TXD;
    struct rte_eth_conf conf;
    struct rte_eth_dev_info dev_info;
    struct rte_eth_rxconf rxq_conf;
    struct rte_eth_txconf txq_conf;

    if (!rte_eth_dev_is_valid_port(port_id)) {
        RTE_LOG(ERR, APP, "Invalid port id %d\n", port_id);
        return -EINVAL;
    }

    RTE_LOG(INFO, APP, "Change MTU of port %d to %u\n", port_id, new_mtu);

    /* Stop specific port */
    ret = rte_eth_dev_stop(port_id);
    if (ret != 0) {
        RTE_LOG(ERR, APP, "Failed to stop port %d: %s\n",
            port_id, rte_strerror(-ret));
        return ret;
    }

    memcpy(&conf, &port_conf, sizeof(conf));

    conf.rxmode.mtu = new_mtu;
    ret = rte_eth_dev_configure(port_id, 1, 1, &conf);
    if (ret < 0) {
        RTE_LOG(ERR, APP, "Fail to reconfigure port %d\n", port_id);
        return ret;
    }

    ret = rte_eth_dev_adjust_nb_rx_tx_desc(port_id, &nb_rxd, &nb_txd);
    if (ret < 0)
        rte_exit(EXIT_FAILURE, "Could not adjust number of descriptors "
                "for port%u (%d)\n", (unsigned int)port_id,
                ret);

    ret = rte_eth_dev_info_get(port_id, &dev_info);
    if (ret != 0) {
        RTE_LOG(ERR, APP,
            "Error during getting device (port %u) info: %s\n",
            port_id, strerror(-ret));

        return ret;
    }

    rxq_conf = dev_info.default_rxconf;
    rxq_conf.offloads = conf.rxmode.offloads;
    ret = rte_eth_rx_queue_setup(port_id, 0, nb_rxd,
        rte_eth_dev_socket_id(port_id), &rxq_conf, pktmbuf_pool);
    if (ret < 0) {
        RTE_LOG(ERR, APP, "Fail to setup Rx queue of port %d\n",
                port_id);
        return ret;
    }

    txq_conf = dev_info.default_txconf;
    txq_conf.offloads = conf.txmode.offloads;
    ret = rte_eth_tx_queue_setup(port_id, 0, nb_txd,
        rte_eth_dev_socket_id(port_id), &txq_conf);
    if (ret < 0) {
        RTE_LOG(ERR, APP, "Fail to setup Tx queue of port %d\n",
                port_id);
        return ret;
    }

    /* Restart specific port */
    ret = rte_eth_dev_start(port_id);
    if (ret < 0) {
        RTE_LOG(ERR, APP, "Fail to restart port %d\n", port_id);
        return ret;
    }

    return 0;
}

/* Callback for request of changing MTU */
static int
kni_change_mtu(uint16_t port_id, unsigned int new_mtu)
{
    int ret;

    __atomic_fetch_add(&kni_pause, 1, __ATOMIC_RELAXED);
    ret =  kni_change_mtu_(port_id, new_mtu);
    __atomic_fetch_sub(&kni_pause, 1, __ATOMIC_RELAXED);

    return ret;
}

/* Callback for request of configuring network interface up/down */
static int
kni_config_network_interface(uint16_t port_id, uint8_t if_up)
{
    int ret = 0;

    if (!rte_eth_dev_is_valid_port(port_id)) {
        RTE_LOG(ERR, APP, "Invalid port id %d\n", port_id);
        return -EINVAL;
    }

    RTE_LOG(INFO, APP, "Configure network interface of %d %s\n",
                    port_id, if_up ? "up" : "down");

    __atomic_fetch_add(&kni_pause, 1, __ATOMIC_RELAXED);

    if (if_up != 0) { /* Configure network interface up */
        ret = rte_eth_dev_stop(port_id);
        if (ret != 0) {
            RTE_LOG(ERR, APP, "Failed to stop port %d: %s\n",
                port_id, rte_strerror(-ret));
            __atomic_fetch_sub(&kni_pause, 1, __ATOMIC_RELAXED);
            return ret;
        }
        ret = rte_eth_dev_start(port_id);
    } else { /* Configure network interface down */
        ret = rte_eth_dev_stop(port_id);
        if (ret != 0) {
            RTE_LOG(ERR, APP, "Failed to stop port %d: %s\n",
                port_id, rte_strerror(-ret));
            __atomic_fetch_sub(&kni_pause, 1, __ATOMIC_RELAXED);
            return ret;
        }
    }

    __atomic_fetch_sub(&kni_pause, 1, __ATOMIC_RELAXED);

    if (ret < 0)
        RTE_LOG(ERR, APP, "Failed to start port %d\n", port_id);

    return ret;
}

static void
print_ethaddr(const char *name, struct rte_ether_addr *mac_addr)
{
    char buf[RTE_ETHER_ADDR_FMT_SIZE];
    rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, mac_addr);
    RTE_LOG(INFO, APP, "\t%s%s\n", name, buf);
}

/* Callback for request of configuring mac address */
static int
kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[])
{
    int ret = 0;

    if (!rte_eth_dev_is_valid_port(port_id)) {
        RTE_LOG(ERR, APP, "Invalid port id %d\n", port_id);
        return -EINVAL;
    }

    RTE_LOG(INFO, APP, "Configure mac address of %d\n", port_id);
    print_ethaddr("Address:", (struct rte_ether_addr *)mac_addr);

    ret = rte_eth_dev_default_mac_addr_set(port_id,
                    (struct rte_ether_addr *)mac_addr);
    if (ret < 0)
        RTE_LOG(ERR, APP, "Failed to config mac_addr for port %d\n",
            port_id);

    return ret;
}

static int
kni_alloc(uint16_t port_id)
{
    uint8_t i;
    struct rte_kni *kni;
    struct rte_kni_conf conf;
    struct kni_port_params **params = kni_port_params_array;
    int ret;

    if (port_id >= RTE_MAX_ETHPORTS || !params[port_id])
        return -1;

    params[port_id]->nb_kni = params[port_id]->nb_lcore_k ?
                params[port_id]->nb_lcore_k : 1;

    for (i = 0; i < params[port_id]->nb_kni; i++) {
        /* Clear conf at first */
        memset(&conf, 0, sizeof(conf));
        if (params[port_id]->nb_lcore_k) {
            snprintf(conf.name, RTE_KNI_NAMESIZE,
                    "vEth%u_%u", port_id, i);
            conf.core_id = params[port_id]->lcore_k[i];
            conf.force_bind = 1;
        } else
            snprintf(conf.name, RTE_KNI_NAMESIZE,
                        "vEth%u", port_id);
        conf.group_id = port_id;
        conf.mbuf_size = MAX_PACKET_SZ;
        /*
         * The first KNI device associated to a port
         * is the main, for multiple kernel thread
         * environment.
         */
        if (i == 0) {
            struct rte_kni_ops ops;
            struct rte_eth_dev_info dev_info;

            ret = rte_eth_dev_info_get(port_id, &dev_info);
            if (ret != 0)
                rte_exit(EXIT_FAILURE,
                    "Error during getting device (port %u) info: %s\n",
                    port_id, strerror(-ret));

            /* Get the interface default mac address */
            ret = rte_eth_macaddr_get(port_id,
                (struct rte_ether_addr *)&conf.mac_addr);
            if (ret != 0)
                rte_exit(EXIT_FAILURE,
                    "Failed to get MAC address (port %u): %s\n",
                    port_id, rte_strerror(-ret));

            rte_eth_dev_get_mtu(port_id, &conf.mtu);

            conf.min_mtu = dev_info.min_mtu;
            conf.max_mtu = dev_info.max_mtu;

            memset(&ops, 0, sizeof(ops));
            ops.port_id = port_id;
            ops.change_mtu = kni_change_mtu;
            ops.config_network_if = kni_config_network_interface;
            ops.config_mac_address = kni_config_mac_address;

            kni = rte_kni_alloc(pktmbuf_pool, &conf, &ops);
        } else
            kni = rte_kni_alloc(pktmbuf_pool, &conf, NULL);

        if (!kni)
            rte_exit(EXIT_FAILURE, "Fail to create kni for "
                        "port: %d\n", port_id);
        params[port_id]->kni[i] = kni;
    }

    return 0;
}

static int
kni_free_kni(uint16_t port_id)
{
    uint8_t i;
    int ret;
    struct kni_port_params **p = kni_port_params_array;

    if (port_id >= RTE_MAX_ETHPORTS || !p[port_id])
        return -1;

    for (i = 0; i < p[port_id]->nb_kni; i++) {
        if (rte_kni_release(p[port_id]->kni[i]))
            printf("Fail to release kni\n");
        p[port_id]->kni[i] = NULL;
    }
    ret = rte_eth_dev_stop(port_id);
    if (ret != 0)
        RTE_LOG(ERR, APP, "Failed to stop port %d: %s\n",
            port_id, rte_strerror(-ret));
    rte_eth_dev_close(port_id);

    return 0;
}

/* Initialise ports/queues etc. and start main loop on each core */
int
main(int argc, char** argv)
{
    int ret;
    uint16_t nb_sys_ports, port;
    unsigned i;
    void *retval;
    pthread_t kni_link_tid;
    int pid;

    /* Associate signal_handler function with USR signals */
    signal(SIGUSR1, signal_handler);
    signal(SIGUSR2, signal_handler);
    signal(SIGRTMIN, signal_handler);
    signal(SIGINT, signal_handler);
    signal(SIGTERM, signal_handler);

    /* Initialise EAL */
    ret = rte_eal_init(argc, argv);
    if (ret < 0)
        rte_exit(EXIT_FAILURE, "Could not initialise EAL (%d)\n", ret);
    argc -= ret;
    argv += ret;

    /* Parse application arguments (after the EAL ones) */
    ret = parse_args(argc, argv);
    if (ret < 0)
        rte_exit(EXIT_FAILURE, "Could not parse input parameters\n");

    /* Create the mbuf pool */
    pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF,
        MEMPOOL_CACHE_SZ, 0, MBUF_DATA_SZ, rte_socket_id());
    if (pktmbuf_pool == NULL) {
        rte_exit(EXIT_FAILURE, "Could not initialise mbuf pool\n");
        return -1;
    }

    /* Get number of ports found in scan */
    nb_sys_ports = rte_eth_dev_count_avail();
    if (nb_sys_ports == 0)
        rte_exit(EXIT_FAILURE, "No supported Ethernet device found\n");

    /* Check if the configured port ID is valid */
    for (i = 0; i < RTE_MAX_ETHPORTS; i++)
        if (kni_port_params_array[i] && !rte_eth_dev_is_valid_port(i))
            rte_exit(EXIT_FAILURE, "Configured invalid "
                        "port ID %u\n", i);

    /* Initialize KNI subsystem */
    init_kni();

    /* Initialise each port */
    RTE_ETH_FOREACH_DEV(port) {
        /* Skip ports that are not enabled */
        if (!(ports_mask & (1 << port)))
            continue;
        init_port(port);

        if (port >= RTE_MAX_ETHPORTS)
            rte_exit(EXIT_FAILURE, "Can not use more than "
                "%d ports for kni\n", RTE_MAX_ETHPORTS);

        kni_alloc(port);
    }
    check_all_ports_link_status(ports_mask);

    pid = getpid();
    RTE_LOG(INFO, APP, "========================\n");
    RTE_LOG(INFO, APP, "KNI Running\n");
    RTE_LOG(INFO, APP, "kill -SIGUSR1 %d\n", pid);
    RTE_LOG(INFO, APP, "    Show KNI Statistics.\n");
    RTE_LOG(INFO, APP, "kill -SIGUSR2 %d\n", pid);
    RTE_LOG(INFO, APP, "    Zero KNI Statistics.\n");
    RTE_LOG(INFO, APP, "========================\n");
    fflush(stdout);

    ret = rte_ctrl_thread_create(&kni_link_tid,
                     "KNI link status check", NULL,
                     monitor_all_ports_link_status, NULL);
    if (ret < 0)
        rte_exit(EXIT_FAILURE,
            "Could not create link status thread!\n");

    /* Launch per-lcore function on every lcore */
    rte_eal_mp_remote_launch(main_loop, NULL, CALL_MAIN);
    RTE_LCORE_FOREACH_WORKER(i) {
        if (rte_eal_wait_lcore(i) < 0)
            return -1;
    }
    monitor_links = 0;
    pthread_join(kni_link_tid, &retval);

    /* Release resources */
    RTE_ETH_FOREACH_DEV(port) {
        if (!(ports_mask & (1 << port)))
            continue;
        kni_free_kni(port);
    }
    for (i = 0; i < RTE_MAX_ETHPORTS; i++)
        if (kni_port_params_array[i]) {
            rte_free(kni_port_params_array[i]);
            kni_port_params_array[i] = NULL;
        }

    /* clean up the EAL */
    rte_eal_cleanup();

    return 0;
}