DPDK  20.05.0
rte_ring_c11_mem.h
1 /* SPDX-License-Identifier: BSD-3-Clause
2  *
3  * Copyright (c) 2017,2018 HXT-semitech Corporation.
4  * Copyright (c) 2007-2009 Kip Macy kmacy@freebsd.org
5  * All rights reserved.
6  * Derived from FreeBSD's bufring.h
7  * Used as BSD-3 Licensed with permission from Kip Macy.
8  */
9 
10 #ifndef _RTE_RING_C11_MEM_H_
11 #define _RTE_RING_C11_MEM_H_
12 
13 static __rte_always_inline void
14 update_tail(struct rte_ring_headtail *ht, uint32_t old_val, uint32_t new_val,
15  uint32_t single, uint32_t enqueue)
16 {
17  RTE_SET_USED(enqueue);
18 
19  /*
20  * If there are other enqueues/dequeues in progress that preceded us,
21  * we need to wait for them to complete
22  */
23  if (!single)
24  while (unlikely(ht->tail != old_val))
25  rte_pause();
26 
27  __atomic_store_n(&ht->tail, new_val, __ATOMIC_RELEASE);
28 }
29 
53 static __rte_always_inline unsigned int
54 __rte_ring_move_prod_head(struct rte_ring *r, unsigned int is_sp,
55  unsigned int n, enum rte_ring_queue_behavior behavior,
56  uint32_t *old_head, uint32_t *new_head,
57  uint32_t *free_entries)
58 {
59  const uint32_t capacity = r->capacity;
60  uint32_t cons_tail;
61  unsigned int max = n;
62  int success;
63 
64  *old_head = __atomic_load_n(&r->prod.head, __ATOMIC_RELAXED);
65  do {
66  /* Reset n to the initial burst count */
67  n = max;
68 
69  /* Ensure the head is read before tail */
70  __atomic_thread_fence(__ATOMIC_ACQUIRE);
71 
72  /* load-acquire synchronize with store-release of ht->tail
73  * in update_tail.
74  */
75  cons_tail = __atomic_load_n(&r->cons.tail,
76  __ATOMIC_ACQUIRE);
77 
78  /* The subtraction is done between two unsigned 32bits value
79  * (the result is always modulo 32 bits even if we have
80  * *old_head > cons_tail). So 'free_entries' is always between 0
81  * and capacity (which is < size).
82  */
83  *free_entries = (capacity + cons_tail - *old_head);
84 
85  /* check that we have enough room in ring */
86  if (unlikely(n > *free_entries))
87  n = (behavior == RTE_RING_QUEUE_FIXED) ?
88  0 : *free_entries;
89 
90  if (n == 0)
91  return 0;
92 
93  *new_head = *old_head + n;
94  if (is_sp)
95  r->prod.head = *new_head, success = 1;
96  else
97  /* on failure, *old_head is updated */
98  success = __atomic_compare_exchange_n(&r->prod.head,
99  old_head, *new_head,
100  0, __ATOMIC_RELAXED,
101  __ATOMIC_RELAXED);
102  } while (unlikely(success == 0));
103  return n;
104 }
105 
129 static __rte_always_inline unsigned int
130 __rte_ring_move_cons_head(struct rte_ring *r, int is_sc,
131  unsigned int n, enum rte_ring_queue_behavior behavior,
132  uint32_t *old_head, uint32_t *new_head,
133  uint32_t *entries)
134 {
135  unsigned int max = n;
136  uint32_t prod_tail;
137  int success;
138 
139  /* move cons.head atomically */
140  *old_head = __atomic_load_n(&r->cons.head, __ATOMIC_RELAXED);
141  do {
142  /* Restore n as it may change every loop */
143  n = max;
144 
145  /* Ensure the head is read before tail */
146  __atomic_thread_fence(__ATOMIC_ACQUIRE);
147 
148  /* this load-acquire synchronize with store-release of ht->tail
149  * in update_tail.
150  */
151  prod_tail = __atomic_load_n(&r->prod.tail,
152  __ATOMIC_ACQUIRE);
153 
154  /* The subtraction is done between two unsigned 32bits value
155  * (the result is always modulo 32 bits even if we have
156  * cons_head > prod_tail). So 'entries' is always between 0
157  * and size(ring)-1.
158  */
159  *entries = (prod_tail - *old_head);
160 
161  /* Set the actual entries for dequeue */
162  if (n > *entries)
163  n = (behavior == RTE_RING_QUEUE_FIXED) ? 0 : *entries;
164 
165  if (unlikely(n == 0))
166  return 0;
167 
168  *new_head = *old_head + n;
169  if (is_sc)
170  r->cons.head = *new_head, success = 1;
171  else
172  /* on failure, *old_head will be updated */
173  success = __atomic_compare_exchange_n(&r->cons.head,
174  old_head, *new_head,
175  0, __ATOMIC_RELAXED,
176  __ATOMIC_RELAXED);
177  } while (unlikely(success == 0));
178  return n;
179 }
180 
181 #endif /* _RTE_RING_C11_MEM_H_ */
volatile uint32_t head
Definition: rte_ring_core.h:72
#define __rte_always_inline
Definition: rte_common.h:193
rte_ring_queue_behavior
Definition: rte_ring_core.h:44
#define unlikely(x)
static void rte_pause(void)
uint32_t capacity
#define RTE_SET_USED(x)
Definition: rte_common.h:110
volatile uint32_t tail
Definition: rte_ring_core.h:73