examples/rxtx_callbacks/main.c

/*-
 *   BSD LICENSE
 *
 *   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
 *   All rights reserved.
 *
 *   Redistribution and use in source and binary forms, with or without
 *   modification, are permitted provided that the following conditions
 *   are met:
 *
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in
 *       the documentation and/or other materials provided with the
 *       distribution.
 *     * Neither the name of Intel Corporation nor the names of its
 *       contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 *
 *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <stdint.h>
#include <inttypes.h>
#include <rte_eal.h>
#include <rte_ethdev.h>
#include <rte_cycles.h>
#include <rte_lcore.h>
#include <rte_mbuf.h>

#define RX_RING_SIZE 128
#define TX_RING_SIZE 512

#define NUM_MBUFS 8191
#define MBUF_CACHE_SIZE 250
#define BURST_SIZE 32

static const struct rte_eth_conf port_conf_default = {
        .rxmode = { .max_rx_pkt_len = ETHER_MAX_LEN, },
};

static unsigned nb_ports;

static struct {
        uint64_t total_cycles;
        uint64_t total_pkts;
} latency_numbers;


static uint16_t
add_timestamps(uint8_t port __rte_unused, uint16_t qidx __rte_unused,
                struct rte_mbuf **pkts, uint16_t nb_pkts,
                uint16_t max_pkts __rte_unused, void *_ __rte_unused)
{
        unsigned i;
        uint64_t now = rte_rdtsc();

        for (i = 0; i < nb_pkts; i++)
                pkts[i]->udata64 = now;
        return nb_pkts;
}

static uint16_t
calc_latency(uint8_t port __rte_unused, uint16_t qidx __rte_unused,
                struct rte_mbuf **pkts, uint16_t nb_pkts, void *_ __rte_unused)
{
        uint64_t cycles = 0;
        uint64_t now = rte_rdtsc();
        unsigned i;

        for (i = 0; i < nb_pkts; i++)
                cycles += now - pkts[i]->udata64;
        latency_numbers.total_cycles += cycles;
        latency_numbers.total_pkts += nb_pkts;

        if (latency_numbers.total_pkts > (100 * 1000 * 1000ULL)) {
                printf("Latency = %"PRIu64" cycles\n",
                latency_numbers.total_cycles / latency_numbers.total_pkts);
                latency_numbers.total_cycles = latency_numbers.total_pkts = 0;
        }
        return nb_pkts;
}

/*
 * Initialises a given port using global settings and with the rx buffers
 * coming from the mbuf_pool passed as parameter
 */
static inline int
port_init(uint8_t port, struct rte_mempool *mbuf_pool)
{
        struct rte_eth_conf port_conf = port_conf_default;
        const uint16_t rx_rings = 1, tx_rings = 1;
        int retval;
        uint16_t q;

        if (port >= rte_eth_dev_count())
                return -1;

        retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
        if (retval != 0)
                return retval;

        for (q = 0; q < rx_rings; q++) {
                retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
                                rte_eth_dev_socket_id(port), NULL, mbuf_pool);
                if (retval < 0)
                        return retval;
        }

        for (q = 0; q < tx_rings; q++) {
                retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
                                rte_eth_dev_socket_id(port), NULL);
                if (retval < 0)
                        return retval;
        }

        retval  = rte_eth_dev_start(port);
        if (retval < 0)
                return retval;

        struct ether_addr addr;

        rte_eth_macaddr_get(port, &addr);
        printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
                        " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
                        (unsigned)port,
                        addr.addr_bytes[0], addr.addr_bytes[1],
                        addr.addr_bytes[2], addr.addr_bytes[3],
                        addr.addr_bytes[4], addr.addr_bytes[5]);

        rte_eth_promiscuous_enable(port);
        rte_eth_add_rx_callback(port, 0, add_timestamps, NULL);
        rte_eth_add_tx_callback(port, 0, calc_latency, NULL);

        return 0;
}

/*
 * Main thread that does the work, reading from INPUT_PORT
 * and writing to OUTPUT_PORT
 */
static  __attribute__((noreturn)) void
lcore_main(void)
{
        uint8_t port;

        for (port = 0; port < nb_ports; port++)
                if (rte_eth_dev_socket_id(port) > 0 &&
                                rte_eth_dev_socket_id(port) !=
                                                (int)rte_socket_id())
                        printf("WARNING, port %u is on remote NUMA node to "
                                        "polling thread.\n\tPerformance will "
                                        "not be optimal.\n", port);

        printf("\nCore %u forwarding packets. [Ctrl+C to quit]\n",
                        rte_lcore_id());
        for (;;) {
                for (port = 0; port < nb_ports; port++) {
                        struct rte_mbuf *bufs[BURST_SIZE];
                        const uint16_t nb_rx = rte_eth_rx_burst(port, 0,
                                        bufs, BURST_SIZE);
                        if (unlikely(nb_rx == 0))
                                continue;
                        const uint16_t nb_tx = rte_eth_tx_burst(port ^ 1, 0,
                                        bufs, nb_rx);
                        if (unlikely(nb_tx < nb_rx)) {
                                uint16_t buf;

                                for (buf = nb_tx; buf < nb_rx; buf++)
                                        rte_pktmbuf_free(bufs[buf]);
                        }
                }
        }
}

/* Main function, does initialisation and calls the per-lcore functions */
int
main(int argc, char *argv[])
{
        struct rte_mempool *mbuf_pool;
        uint8_t portid;

        /* init EAL */
        int ret = rte_eal_init(argc, argv);

        if (ret < 0)
                rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
        argc -= ret;
        argv += ret;

        nb_ports = rte_eth_dev_count();
        if (nb_ports < 2 || (nb_ports & 1))
                rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n");

        mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
                NUM_MBUFS * nb_ports, MBUF_CACHE_SIZE, 0,
                RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
        if (mbuf_pool == NULL)
                rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");

        /* initialize all ports */
        for (portid = 0; portid < nb_ports; portid++)
                if (port_init(portid, mbuf_pool) != 0)
                        rte_exit(EXIT_FAILURE, "Cannot init port %"PRIu8"\n",
                                        portid);

        if (rte_lcore_count() > 1)
                printf("\nWARNING: Too much enabled lcores - "
                        "App uses only 1 lcore\n");

        /* call lcore_main on master core only */
        lcore_main();
        return 0;
}