examples/server_node_efd/server/init.c

/*-
 *   BSD LICENSE
 *
 *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
 *   All rights reserved.
 *
 *   Redistribution and use in source and binary forms, with or without
 *   modification, are permitted provided that the following conditions
 *   are met:
 *
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in
 *       the documentation and/or other materials provided with the
 *       distribution.
 *     * Neither the name of Intel Corporation nor the names of its
 *       contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 *
 *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include <sys/queue.h>
#include <errno.h>
#include <stdarg.h>
#include <inttypes.h>

#include <rte_common.h>
#include <rte_memory.h>
#include <rte_memzone.h>
#include <rte_eal.h>
#include <rte_byteorder.h>
#include <rte_atomic.h>
#include <rte_launch.h>
#include <rte_per_lcore.h>
#include <rte_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_debug.h>
#include <rte_ring.h>
#include <rte_log.h>
#include <rte_mempool.h>
#include <rte_memcpy.h>
#include <rte_mbuf.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
#include <rte_string_fns.h>
#include <rte_cycles.h>
#include <rte_efd.h>
#include <rte_hash.h>

#include "common.h"
#include "args.h"
#include "init.h"

#define MBUFS_PER_NODE 1536
#define MBUFS_PER_PORT 1536
#define MBUF_CACHE_SIZE 512

#define RTE_MP_RX_DESC_DEFAULT 512
#define RTE_MP_TX_DESC_DEFAULT 512
#define NODE_QUEUE_RINGSIZE 128

#define NO_FLAGS 0

/* The mbuf pool for packet rx */
struct rte_mempool *pktmbuf_pool;

/* array of info/queues for nodes */
struct node *nodes;

/* EFD table */
struct rte_efd_table *efd_table;

/* Shared info between server and nodes */
struct shared_info *info;

static int
init_mbuf_pools(void)
{
        const unsigned int num_mbufs = (num_nodes * MBUFS_PER_NODE) +
                        (info->num_ports * MBUFS_PER_PORT);

        /*
         * Don't pass single-producer/single-consumer flags to mbuf create as it
         * seems faster to use a cache instead
         */
        printf("Creating mbuf pool '%s' [%u mbufs] ...\n",
                        PKTMBUF_POOL_NAME, num_mbufs);
        pktmbuf_pool = rte_pktmbuf_pool_create(PKTMBUF_POOL_NAME, num_mbufs,
                MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());

        return pktmbuf_pool == NULL; /* 0  on success */
}

static int
init_port(uint8_t port_num)
{
        /* for port configuration all features are off by default */
        const struct rte_eth_conf port_conf = {
                .rxmode = {
                        .mq_mode = ETH_MQ_RX_RSS
                }
        };
        const uint16_t rx_rings = 1, tx_rings = num_nodes;
        const uint16_t rx_ring_size = RTE_MP_RX_DESC_DEFAULT;
        const uint16_t tx_ring_size = RTE_MP_TX_DESC_DEFAULT;

        uint16_t q;
        int retval;

        printf("Port %u init ... ", (unsigned int)port_num);
        fflush(stdout);

        /*
         * Standard DPDK port initialisation - config port, then set up
         * rx and tx rings.
         */
        retval = rte_eth_dev_configure(port_num, rx_rings, tx_rings, &port_conf);
        if (retval != 0)
                return retval;

        for (q = 0; q < rx_rings; q++) {
                retval = rte_eth_rx_queue_setup(port_num, q, rx_ring_size,
                                rte_eth_dev_socket_id(port_num),
                                NULL, pktmbuf_pool);
                if (retval < 0)
                        return retval;
        }

        for (q = 0; q < tx_rings; q++) {
                retval = rte_eth_tx_queue_setup(port_num, q, tx_ring_size,
                                rte_eth_dev_socket_id(port_num),
                                NULL);
                if (retval < 0)
                        return retval;
        }

        rte_eth_promiscuous_enable(port_num);

        retval = rte_eth_dev_start(port_num);
        if (retval < 0)
                return retval;

        printf("done:\n");

        return 0;
}

static int
init_shm_rings(void)
{
        unsigned int i;
        unsigned int socket_id;
        const char *q_name;
        const unsigned int ringsize = NODE_QUEUE_RINGSIZE;

        nodes = rte_malloc("node details",
                sizeof(*nodes) * num_nodes, 0);
        if (nodes == NULL)
                rte_exit(EXIT_FAILURE, "Cannot allocate memory for "
                                "node program details\n");

        for (i = 0; i < num_nodes; i++) {
                /* Create an RX queue for each node */
                socket_id = rte_socket_id();
                q_name = get_rx_queue_name(i);
                nodes[i].rx_q = rte_ring_create(q_name,
                                ringsize, socket_id,
                                RING_F_SP_ENQ | RING_F_SC_DEQ);
                if (nodes[i].rx_q == NULL)
                        rte_exit(EXIT_FAILURE, "Cannot create rx ring queue "
                                        "for node %u\n", i);
        }
        return 0;
}

/*
 * Create EFD table which will contain all the flows
 * that will be distributed among the nodes
 */
static void
create_efd_table(void)
{
        uint8_t socket_id = rte_socket_id();

        /* create table */
        efd_table = rte_efd_create("flow table", num_flows * 2, sizeof(uint32_t),
                        1 << socket_id, socket_id);

        if (efd_table == NULL)
                rte_exit(EXIT_FAILURE, "Problem creating the flow table\n");
}

static void
populate_efd_table(void)
{
        unsigned int i;
        int32_t ret;
        uint32_t ip_dst;
        uint8_t socket_id = rte_socket_id();
        uint64_t node_id;

        /* Add flows in table */
        for (i = 0; i < num_flows; i++) {
                node_id = i % num_nodes;

                ip_dst = rte_cpu_to_be_32(i);
                ret = rte_efd_update(efd_table, socket_id,
                                (void *)&ip_dst, (efd_value_t)node_id);
                if (ret < 0)
                        rte_exit(EXIT_FAILURE, "Unable to add entry %u in "
                                        "EFD table\n", i);
        }

        printf("EFD table: Adding 0x%x keys\n", num_flows);
}

/* Check the link status of all ports in up to 9s, and print them finally */
static void
check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
        uint8_t portid, count, all_ports_up, print_flag = 0;
        struct rte_eth_link link;

        printf("\nChecking link status");
        fflush(stdout);
        for (count = 0; count <= MAX_CHECK_TIME; count++) {
                all_ports_up = 1;
                for (portid = 0; portid < port_num; portid++) {
                        if ((port_mask & (1 << info->id[portid])) == 0)
                                continue;
                        memset(&link, 0, sizeof(link));
                        rte_eth_link_get_nowait(info->id[portid], &link);
                        /* print link status if flag set */
                        if (print_flag == 1) {
                                if (link.link_status)
                                        printf("Port %d Link Up - speed %u "
                                                "Mbps - %s\n", info->id[portid],
                                                (unsigned int)link.link_speed,
                                (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
                                        ("full-duplex") : ("half-duplex\n"));
                                else
                                        printf("Port %d Link Down\n",
                                                (uint8_t)info->id[portid]);
                                continue;
                        }
                        /* clear all_ports_up flag if any link down */
                        if (link.link_status == ETH_LINK_DOWN) {
                                all_ports_up = 0;
                                break;
                        }
                }
                /* after finally printing all link status, get out */
                if (print_flag == 1)
                        break;

                if (all_ports_up == 0) {
                        printf(".");
                        fflush(stdout);
                        rte_delay_ms(CHECK_INTERVAL);
                }

                /* set the print_flag if all ports up or timeout */
                if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
                        print_flag = 1;
                        printf("done\n");
                }
        }
}

int
init(int argc, char *argv[])
{
        int retval;
        const struct rte_memzone *mz;
        uint8_t i, total_ports;

        /* init EAL, parsing EAL args */
        retval = rte_eal_init(argc, argv);
        if (retval < 0)
                return -1;
        argc -= retval;
        argv += retval;

        /* get total number of ports */
        total_ports = rte_eth_dev_count();

        /* set up array for port data */
        mz = rte_memzone_reserve(MZ_SHARED_INFO, sizeof(*info),
                                rte_socket_id(), NO_FLAGS);
        if (mz == NULL)
                rte_exit(EXIT_FAILURE, "Cannot reserve memory zone "
                                "for port information\n");
        memset(mz->addr, 0, sizeof(*info));
        info = mz->addr;

        /* parse additional, application arguments */
        retval = parse_app_args(total_ports, argc, argv);
        if (retval != 0)
                return -1;

        /* initialise mbuf pools */
        retval = init_mbuf_pools();
        if (retval != 0)
                rte_exit(EXIT_FAILURE, "Cannot create needed mbuf pools\n");

        /* now initialise the ports we will use */
        for (i = 0; i < info->num_ports; i++) {
                retval = init_port(info->id[i]);
                if (retval != 0)
                        rte_exit(EXIT_FAILURE, "Cannot initialise port %u\n",
                                        (unsigned int) i);
        }

        check_all_ports_link_status(info->num_ports, (~0x0));

        /* initialise the node queues/rings for inter-eu comms */
        init_shm_rings();

        /* Create the EFD table */
        create_efd_table();

        /* Populate the EFD table */
        populate_efd_table();

        /* Share the total number of nodes */
        info->num_nodes = num_nodes;

        /* Share the total number of flows */
        info->num_flows = num_flows;
        return 0;
}