.. SPDX-License-Identifier: BSD-3-Clause
   Copyright(c) 2022 Intel Corporation.

.. include:: <isonum.txt>

CPFL Poll Mode Driver
=====================

The [*EXPERIMENTAL*] cpfl PMD (**librte_net_cpfl**) provides poll mode driver support
for Intel\ |reg| Infrastructure Processing Unit (Intel\ |reg| IPU) E2100.
Please refer to
https://www.intel.com/content/www/us/en/products/network-io/infrastructure-processing-units/asic/e2000-asic.html
for more information.

Linux Prerequisites
-------------------

Follow the DPDK :doc:`../linux_gsg/index` to setup the basic DPDK environment.

To get better performance on Intel platforms,
please follow the :doc:`../linux_gsg/nic_perf_intel_platform`.

Features
--------

Vector PMD
~~~~~~~~~~

Vector path for Rx and Tx path are selected automatically.
The paths are chosen based on 2 conditions:

- ``CPU``

  On the x86 platform, the driver checks if the CPU supports AVX512.
  If the CPU supports AVX512 and EAL argument ``--force-max-simd-bitwidth``
  is set to 512, AVX512 paths will be chosen.

- ``Offload features``

  The supported HW offload features are described in the document cpfl.ini,
  A value "P" means the offload feature is not supported by vector path.
  If any not supported features are used, cpfl vector PMD is disabled
  and the scalar paths are chosen.

Configuration
-------------

Runtime Configuration
~~~~~~~~~~~~~~~~~~~~~

- ``vport`` (default ``0``)

  The PMD supports creation of multiple vports for one PCI device,
  each vport corresponds to a single ethdev.
  The user can specify the vports with specific ID to be created, and ID should
  be 0 ~ 7 currently, for example:

    -a ca:00.0,vport=[0,2,3]

  Then the PMD will create 3 vports (ethdevs) for device ``ca:00.0``.

  If the parameter is not provided, the vport 0 will be created by default.

- ``rx_single`` (default ``0``)

  There are two queue modes supported by Intel\ |reg| IPU Ethernet E2100 Series,
  single queue mode and split queue mode for Rx queue.

  For the single queue model, the descriptor queue is used by SW to post buffer
  descriptors to HW, and it's also used by HW to post completed descriptors to SW.

  For the split queue model, "RX buffer queues" are used to pass descriptor buffers
  from SW to HW, while RX queues are used only to pass the descriptor completions
  from HW to SW.

  User can choose Rx queue mode, example:

    -a ca:00.0,rx_single=1

  Then the PMD will configure Rx queue with single queue mode.
  Otherwise, split queue mode is chosen by default.

- ``tx_single`` (default ``0``)

  There are two queue modes supported by Intel\ |reg| IPU Ethernet E2100 Series,
  single queue mode and split queue mode for Tx queue.

  For the single queue model, the descriptor queue is used by SW to post buffer
  descriptors to HW, and it's also used by HW to post completed descriptors to SW.

  For the split queue model, "TX completion queues" are used to pass descriptor buffers
  from SW to HW, while TX queues are used only to pass the descriptor completions from
  HW to SW.

  User can choose Tx queue mode, example::

    -a ca:00.0,tx_single=1

  Then the PMD will configure Tx queue with single queue mode.
  Otherwise, split queue mode is chosen by default.


Driver compilation and testing
------------------------------

Refer to the document :doc:`build_and_test` for details.